I have loaded a few of Santod's awesome ROMs on my Verizon HTC One M7. Recently I have had a problem when I installed NuSenseSIX RC4.4 and RC4.6, did full wipe, used his modded TWRP.
For some reason, when I dial from Contacts, it dials the tones REALLY fast. Even though it is so fast, it works fine for the phone number portion and dialing regular phone numbers. Some of my phone numbers require an Access Code however.
For example:
1-800-555-5555,,123456789#
The phone number part dials OK. The two commas pauses and the phone service's automated voice says to enter my access code. But when my phone starts entering the access code, it is still so fast that the service repeats back but misses some of the numbers.
When the access code tones are entered, the service drops the last few digits (because it is so fast).
Any tips? I will update to NuSenseSIX RC 5.0 soon.
Thanks, any help is appreciated.
Related
I use Youmail for my voicemail. I can't seem to set the voicemail speed dial key to use youmail's access number and get it to stick after a soft reset. I go to the Phone Settings, choose Services, then "Voice Mail and Text Messages". The phone then says it is reading the settings from the network and displays T-Mobile's voicemail access number under the "Voice Mail:" field. I change this to youmail's number, and click ok. The phone then says it's sending the information to the network. At this point the voicemail speed dial key correctly dials youmail's access number as long as I don't reset my phone.
Does anyone know how to make this setting stick?
Every ROM I've tried has this problem. I never tried doing this on the stock ROM, so I don't know if it's a problem with the custom ROMs or a T-Mobile problem.
I've received a voicemail (I have the reel-to-reel tape icon). If I do anything in an attempt to listen to the voicemail (including dialling 901 as suggested) then my phone attempts to make a call, which ends about one second later, then the display locks and I have to enter my PIN number again.
I'm happy just to turn Voicemail off, as it has stopped working, but I suspect this will involve dialling 901, and then I'm back to square 1.
Any suggestions, or do I just wait for the voicemail to expire?
I liked this phone for the first three weeks, but now, with the "Low memory" problem and now this, I've passed into the "hopefully someone will steal it" phase...
I suspect it that your wfs can't read the settings from the sim to find out the voicemail/anwser phone. Haven't tested it, will report back if I have a problem.
Sent from my HTC Wildfire S A510e using the air.
That was it. GiffGaff uses 443 (GIF) instead of 901.
Their help said to enter *61*443# but that didn't seem to do anything. Voicemail still said 901.
So I went into the settings and changed the Voicemail number to 443. It still said 901.
So I rebooted the phone. Now it says 443 and Voicemail works.
I'm left wondering which of my two actions fixed the problem, and if it WASN'T *61*443# then I wonder what that did?
voicemail is in your service provider in sim, not included in phone only emails are compatible with wildfire s. just tell them to email you than this voicemail.
So I got 4.1 running on my Gnex (EaglesBlood) and it has been working just fine as long as I remember. Now all of the sudden I'm not able to call my girlfriend anymore, she can call me and I can text her. We also tried switching phones and with my sim card in her phone I was able to call her and with her sim card in my Gnex she was able to call me.
So it doesn't look like its the sim cards or my carriers fault, but it still doesn't make any sense why my gnex refuses to dial just one number, all other work fine, it's just that one number that I cant call, it just starts to beep rapidly.
So far I tried the following:
Calling the same number from another phone with my sim [WORKS]
Deleting all contact info to that number [DIDN'T HELP]
Downloaded another dialer from play store [DIDN'T HELP]
Removed battery and restarted phone [DIDN'T HELP]
Clearing app data for Phone.apk [DIDN'T HELP]
I don't want to reflash the ROM since it's so outdated and I'm just waiting for a more stable release of PA, but there has to be something that can be done, it's just stupid that there is that one number that I can't call and it happens to be the most used one too
Hmmm, are you sure your number is not blocked in her phone by mistake? I am just guessing that this is the case so whenever you call, her phone rejects your number.
I'll have to find out about that, why the hell didn't I think of that, always just assumed that the problem was on my end.
I have a T-mobile T889v unlocked and on AT&T LTE rooted with DN4, everything is working great for the most part but voice mail. When I dial VM it keeps saying password not recognized. I've been searching threads to address this with no luck. I went to device settings and under my number it shows unknown... is this why VM does not recognize my password? If so how do I change it show it shows my number? Thanks for any help....
freshroot said:
I have a T-mobile T889v unlocked and on AT&T LTE rooted with DN4, everything is working great for the most part but voice mail. When I dial VM it keeps saying password not recognized. I've been searching threads to address this with no luck. I went to device settings and under my number it shows unknown... is this why VM does not recognize my password? If so how do I change it show it shows my number? Thanks for any help....
Click to expand...
Click to collapse
I wonder, since you've got a different carrier than the phone, if it is dialing the wrong number. From what I understand, you're have AT&T as your wireless provider, right? When I tried looking at AT&T's support forums, it shows to dial your number to access your voice mail. So, when you press and hold 1 to speed dial your voice mail, is it dialing your number? If it's not your number, first try dialing your number manually and see if your password works that way.
Now, I don't have DN4 so I'm not sure what kind of settings you'll have. For me, I use Team UB's Lollipop release and I can open my dialer, go to settings, and there is a "Call Settings" menu where I can change the number it dials for Voice mail. It's gotta be somewhere in the dialer settings, I assume.
I hope this helps.
All you need is your Carriers Voicemail number and place it in the Call Settings.
Hi.
I've just had my first LineageOS (19.1) installed on a Galaxy S7 (SM-G930F). Most stuff working, but I would like to use FDN as well. While this works on my original android device, I cannot get it to work here.
Results are somewhat random, but unfortunatly in all directions. Sometimes I cannot dial when FDN is active while the number listed. Sometimes it works when I enter the number over the dialing pad but not when selecting the exactly same number from the contact. Sometimes I can dial when FDN is active whiel the number is _not_ listed. Sometimes I need to reboot and then results are different. Sometimes I cannot inactive FDN or alter the number list until I have again rebootet. Overall, I get the impression this is not really working with LineageOS. Can someone confirm this is indeed a OS issue or anyone got another idea why this is so randomly inaccurate behaviour on that feature?
Thanks /V