Related
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
try doing a hard reset not just a soft reset that might help
medo_punsher said:
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
Click to expand...
Click to collapse
if u have loaded hardspl then hold power button + OK button on sides of phone and then stick stylus into reset button an dthis should get u 2 red, green, white, blue colour screen and then plug usb in and re-flash
get hermes in bootloader mode, connect USB cable and flash with this http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
Activesync doesn't need to be runing.
download mtty and do like he said here "http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen" (copy all text between " " and paste to your browser).
After "set 14" give "task 8"
Try flashing from SD card, first the HardSpl ant then the Original Stripped ROM.
@TheMim : tried but didnt work
@eryunt : how ?? i have a custom rom with the name HERMIMG.nbh on my sd card but it doesnt upgrade it says loading for a few seconds then some red numbers and letters appear at the top of the screen then it goes into the bootloader and doesnt upgrade
NOTE THAT : i dont have hard spl (no supercid)
Thnx again , plz help
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
Hope it fixes your Tytn
Many thanks for your help , i will try that tomorrow but one final question ,
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
medo_punsher said:
How can i access my sd card with no phone ?? do i need an external sd-to-usb device or something like that ??
Click to expand...
Click to collapse
Yes, you need an SD-Reader for your PC
Okay , now i have a cooked rom on my sd card (fat32 formatted) named HERMIMG.nbh when i get into bootloader it says loading for a few second then a red number "00068002" appears at the top of the screen and it continues to the tri-colour bootloader
any help ??
Have You already installed HARDSpl correctly via SD-card?
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
medo_punsher said:
No , i didnt but will it work or i will get the same red number ??
PS : my bootloader version is 1.04 so i guess i dont need hard spl as this one can flash any rom , right ??
Click to expand...
Click to collapse
Try downloading HARDSpl7 from here:
http://forum.xda-developers.com/attachment.php?attachmentid=35136&d=1173326890
Unzip it and rename the file "RUU_signed.nbh" in "HERMIMG.nbh"; put it on SD and so you will flash the HARDSpl.
Then, make the same thing with the file "RUU_signed.nbh" extracted from an original shipped ROM.
JUST FOLLOW ALL THE STEPS ABOVE
No no no no..... HSPL cant be upgraded now via SD card cause th SSPL was unsuccesfull!!!!!.....
Get a XP PC... your batt must be 50% charged or more "better", a working USB cable
NO SD CARD inserted... your XP pc must have NET frameworks 3.5
put your device in bootloader mode.... and upgrade any stock rom to rewrite a valid SPL cause your is corrupted now
then when you get a stock rom working via SSPL you will be able to redo the steps to flash HSPL V7
Hi
I was Install UNOFFICIAL ROM Bada 2 to My S8500 But there are a lot of problems .
So I decided to re-install the official version of the old but I can't Because of this error message appears when you attempt Flashing the official rom .
'Error : Amms Write [0.2s]' .
Is there a solution? .
This is the way in which I Flashing ROM .
1- use Downloader v5.67
2-Select ( LSI Mode ) + Full Download .
3-Access to the download Mode .(Press Voul .Down + Power + Lock key )At the same time .
4-And finally Click (DOWNLOAD) from Loader .
What happens is only this message appears 'Error : Amms Write [0.2s]' . .
Majdi star
hello
what's your old firmware version ?
are you shure it's a full version or only an update ? you need in first a full version if you want to come back in bada 1
Make sure Kies is closed before you flash.
Is still an ongoing problem
Did not solve the problem now to the same previous error message returned and appeared again .
Is there another way to solve this problem ?
thank you .
Majdi star
hummm
it seems your device driver
try to remove it
install again
put your mobile in download mode
connect your mobile via usb (without multiloader)
wait till your computer search and install the driver (win7)
disconnect
now try to do the steps of flashing
edit:charge your mobile
Hello ,
i bought my DHD few days ago , it is shipped with the last GB update , Android version 2.3.5 , Sense 3.0 , software number 3.13.415.2 ...
i know how bad that looks , cuz rooting the GB shipped dhd seems to be pain in the ass ...
i started to look for it before making a new thread, i found 2 solutions , AAHK and HTC DEV TOOL .
starting with htc dev tool , i read that it has many disadvantages , and a lot of custom roms wont be able to be flashed after using this method in rooting , so i decided to choose the AAHK which seems much better , but i faced a major problem , the downgrading of the dhd ...
i started to root using AAHK , did every thing was written in the notes ,disabling av , installing drivers , usb debugging ....etc
1- connected the phone
2- pasted the password
3- pressed 1 to start hacking
4- i was asked to downgrade , i chose yes
here comes the problem , cuz the aahk started trying to download the PD98IMG , it completes 20 try then stops .
i took the link of the PD98IMG , and downloaded it myself , its a zip file sized 256 mb ... i put it in the file that has the same name in the kit , and started over again , nothing happened .... pasted it to the sd card and started again , nothing happened also , and the kit tries always to download the PD98IMG with no result .....
did i make any mistake ?
did i miss a step ?
any help will be appreciated , thanks in advance
it's not a big deal... just take the downloaded ROM "PD98IMG.zip" and copy it to the root of your SD card, then go to hboot "turn off the phone and then start it with power+vol down " it'll take you to the hboot menu " white screen with few options " it'll scan your sd card and automatically prompt you that if you wanna install the discovered ROM or not, choose yes and you must be ready to go.... hope that what i said is helpful and guys correct me if I'm wrong..
if i helped please press the thx button
SpiritStealer said:
it's not a big deal... just take the downloaded ROM "PD98IMG.zip" and copy it to the root of your SD card, then go to hboot "turn off the phone and then start it with power+vol down " it'll take you to the hboot menu " white screen with few options " it'll scan your sd card and automatically prompt you that if you wanna install the discovered ROM or not, choose yes and you must be ready to go.... hope that what i said is helpful and guys correct me if I'm wrong..
if i helped please press the thx button
Click to expand...
Click to collapse
thx pal , the problem was in "PD98IMG.zip" downloading step because of the internet proscription in Syria , i used a proxy bypass software and everything wnet perfect ... it took some time to download the image but it deserves waiting .... lol
ghassan haddad said:
thx pal , the problem was in "PD98IMG.zip" downloading step because of the internet proscription in Syria , i used a proxy bypass software and everything wnet perfect ... it took some time to download the image but it deserves waiting .... lol
Click to expand...
Click to collapse
mine transfers the file to sd card but hboot wont show any option to press the volume up key to start the downgrading process please help
looks like you have a problem with downloading the downgrade ROM due to your slow internet speed?
I suggest that you should download and install this stock rom
___h t t p ://shipped-roms.com/download.php?model=Ace&file=RUU_Ace_TELUS_WWE_1.84.661.1_R_Radio_12.35d.60.140f_26.06.03.24_M2_release_168987_signed.exe
This is an old stock rom but it will make the AAHK be able to root without downgrading the ROM. Since the link above is a direct link, you can add it to any download manager which can accelerate your download speed. It is faster than letting the AAHK download the old rom by it self.
Hope this help
Can anyone tell me how to install the driver correctly from the AAHK pack. I go to tools then win and install from there. Then I run the program and it gives an error message. Can anybody tell me what seems to be the problem. Thank you for your help guys.
What is the error message ?
Are you talking about the adb drivers ?
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
flashing
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
درورد بر برادر شیرازی
هماهنگ کن یه سر بیا مغازه ببینیم چیکارش میشه کرد
ضمن اینکه هزار تا تالار رفتی ولی یه سر به
تالار اندروید ایران
هم نزدی !
MOD EDIT - Translation added (seems a bit off)
Drvrd brother Shirazi
Come shop to see Chykarsh 's now a head coordinator
While thousands were leaving the hall , but a head
Android Forums Iran
Is near !
scamex said:
did you changed port number to 41 ? sorry if you did.
Edit: Run all programs as Administrator if you are on windows !
Click to expand...
Click to collapse
yes ... my problem is with the phone .. i guess one partition must be written in first place to get the other work and writeable .. but i tried all solution and still the phone give me no answer ... all i have tried to write even one partition failed .... any other ideas ???
mastershex said:
salam bar to ey hamshahri
dadash man khodam tahe LG kara hastam ... lg khamush hanuz az zire dastam birun narafte .... inam az save vasam umade .. teh rafte ... yazd rafte .. shirazam dase kolofta gashte alan reside dastam mikham kar be taviz hard nakeshe ... yani kari nis k nakarde basham rosh pasazh soti tasvir das doktor ham boode nashode ..... dg mundam chikaresh konam ... age rahnamaee ya file dari mamnon misham
Click to expand...
Click to collapse
ok , dar har soorat
dr ham ehtemalan vaght nadashte vagarna injoor mavaredo ghablan too g2 hal kardim
agar khasti ye sar biar checkesh konim
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
scamex said:
do you have sdcard inserted in the phone ? or maybe you are mistypping partition name .... sorry for my english.
in linux that error is based on fstrim error, wich means that the memory hardware is corrupted.
If you want you can jtag that phone via Octopus box.
Click to expand...
Click to collapse
in this case that solution does not work i tried but no success ... im 100% sure of the spelling of what im typing .... any other idea ???
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Just stop using your phone and keep it dead for a week. It will get back to normal.
LG G3 Fastboot
i am having the exact same problem with my lg g3, and i cant find the solution anywhere on the internet. If you solved your problem please kindly share the procedure.....
Same problem here
Any news from the topicstarter? I have the same problem as well on my D855 that only fastboot is working.
I am not sure what happened but my phone just rebooted out of the blue and booted android as far as the lockscreen when it froze and rebooted again. After that only fastboot is showing up.
*Update: I brought my phone back to the store and it is fixed under warranty. I haven't received a report on the repair carried out so I only can guess what they have done and that is that they have replaced the mainboard (different IMEI now). Good news is that it works like it should. It's shipped to me running Lollipop so I will downgrade to Kitkat but that's just my personal preference.
I have the same problem with D855, is it dead mmc? any suggestions, anyone knows something?
Same problem here. Anyone can help finding a solution for this?
soltution for no download mode, stcuk in fastboot mode, stuck lg logo, qhsusb bulk mo
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
masrooraly said:
i have got this prob with my lg g3 d855 32gb model. phone is not responding to anything . it neither goes into download mode nor the recovery mode it has got complete dead idk why. please help out if u can solve this through team viewer ?
Click to expand...
Click to collapse
Send me ur team vuewer id and pass
Trying to respawn the post, becouse i have the same proble with my phone. I want to know if someone find a solution for it. Thanks
Same problem here..
mastershex said:
hey guys my phone stucked in fastboot mode (D855) and its a bout week that i searched every where and have done hundred of ways from hundred of forumes but still no success ... whenever i want to write an img file backed up from another phone ( such az boot laf recovery sbl1 tz ) it says :
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
i dont know what else to do .... my phone hangs on logo and after sometime it goes fastboot mode .... any idea how to solve this problem ???
Click to expand...
Click to collapse
Same Problem here.. Any luck ?
hello guys , so i have my htc m8 as a backup device and while doing encryption the device unexpectedly turned off , and now when i try to turn it on after booting it pops out that encryption went wrong, unfortunately my volume buttons doesnt works anymore so im left with a (hard?) bricked phone , anyone that have has any similar issues feel free to share thoughts and advices, THANKS IN ADVANCE.
romariothartori said:
hello guys , so i have my htc m8 as a backup device and while doing encryption the device unexpectedly turned off , and now when i try to turn it on after booting it pops out that encryption went wrong, unfortunately my volume buttons doesnt works anymore so im left with a (hard?) bricked phone , anyone that have has any similar issues feel free to share thoughts and advices, THANKS IN ADVANCE.
Click to expand...
Click to collapse
1- unlock bootloader by HTCDEV
2- FLASH TWRP recovery
3- from TWRP select wipe / advance / lower of page you will find fix partition
4- mark the data box , then convert it to from EXT to FAT , then back and wipe it .
5- do the same for SYS , and then for INTERNAL STORAGE .
6- after full wipe success with out any error , and the indication of (0 MB) GOSE OFF , back and reformat the above to EXT4
7- install any rom , from your ext-sd .
THAT'S IT , PRESS THANKS IF I SAVE YOUR LIFE