Develop Bugs

Universal Dead flashing

Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.

1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.

device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks

That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.

Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414

i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?

The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.

hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot

Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz

hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot

Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.

connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz

hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz

are there any useful hints extrem69 ?

no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?

siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.

wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................

Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.

Eten x610

Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me

hi there
try thees Steps
1. Run the ROM update program on your PC and go through the installation process until your reach the ‘End User Update‘ window. Leave this running.
2. Go to the Temp file in your Documents. This is usually C:\Documents and Settings\username\Local Settings\Temp but it really depends on how you set up Windows.
3. Look for these 2 files, temp.dat (about 60 MB) and USBDLUpdate_Console.exe (about 4 KB) and copy them to your formatted SD Card using a card reader. You might want to copy these files to another location on your PC before copying it to your card reader if there are problems. Also, rename temp.dat to temp.bin before proceeding to the next step.
4. Put this card into your device and put the device into Bootloader mode. This can be done by pressing (and holding) the power button and voice commander key and then soft resetting. When it restarts, you can remove the stylus but keep your hold on the power and voice commander buttons.
5. The installation will proceed but at a slower rate than if you did it on your PC. This is due to the slower transfer rate between the card and device. It might take about 15-30 minutes so it would be best if your device was connected to the mains charger.
6. Installation is complete when you see this message “USB host is not connected yet“. This is your sign to do a soft reset and setup your device as the ROM installation was successful.
***
you may use this rom
http://rapidshare.com/files/314654442/Eten_X610_WWE.7z
just rename temp.dat to temp.bin put in formatted sd card
and go threw steps 4 to 6
any how you are welcome to
http://www.eten-users.eu/index.php?showforum=52

Hello,
I Tried All Ways & Your Roms On Etenusers
But My Boot Loader Shows a White Screen After Using Magic Numbers Method!
What Can I Do?
My Device Is x610 Samir 020 0702
One An Other That: My Booting With All The Roms That I Tested With Memory Card Method Long Only 4-5 Minutes! Isn't It Wrong?

Aha i got it now
Ok i got it now
I understand your problem
you cant do any thing for your device unless you have another Glofiish device (any model)
because your flasher is corrupted
if you find any working Glofiish device (any model) this is how to do it
1- connect the working device to Active Sync
2- download this tool http://rapidshare.com/files/254487467/UnLock_upgrade.rar
3- put one of my roms in the same folder of the tool.
4- open the upgrade.bat
5- flow the installation steps until the device goes to bootloader
6- now disconnect the working device from usb
7- put your device in boot loader mode connect your device to pc
8- push the update button .
and you are done
any how send me your mobile number as PM and i will call you as long as you are
in ksa

Oh A Big Problem!!!!
I'm In Iran & I Think There Are max 10 Glofiish Device In Iran!!!
Some Time My Boot Loader Work But Only With Sd Card
Isn't Any Other Solution?

I have another problem with x610. After hard reseting the phone after I pressed yes on deleting the files, I got myself callibrating the phone but the callibration stucks forever and it does not passes so the phone wont start...
Is there any solution? Please help as after searching I found nothing as a solution so I am asking here.
can I boot somehow from sd card? I mean formatting the phone?

nephew said:
Hello,
I Have A Glofiish x610,
This Time When I Had A Hard Reset, It Hangs While Installing The Rom Softwares, So I Soft Reset The Device...
It Doesn't Load!
It Can't Be Hard Reset Too!
I Downloaded The exe File From Glofiish.com For Updating The Os But It Needs Active Sync! My Device Doesn't Load So I Can't Use Active Sync
Please Help Me
Click to expand...
Click to collapse
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..

probir_dev said:
To Hard reset x610 you need to press reset and on button, then press on button again while holding down end call(red) button, after some time erase all data option with timer will appear, press wifi/gps button that is listed under the YES option to change the times option or erasing data,
next screen will confirm your choice..
and we are back to square one and phone can be used again.. will all data lost..
Click to expand...
Click to collapse
Hi,
I tried as you said above, when I click YES it showed as bellow
"erase all data and load default ? (Yes)
please wait... "
and nothing had happened and it was showing like that continuously..
What should I do to get back my device?
please help me to sort out this.
thanks in advance..

HTC one X- Blank Screen of Death.. Please please please help:(

Hello Everyone!!
I have HTC one x which is 2 year old and the same has now gone on a blank Screen of Death. Based on HTC service centers advice in INDIA I have tried the "Reboot" and "Factory Reset" option (held down the volume down and power button) but it did not work. It just keeps going "On" and "Off" by itself.
I would like recover my files and contacts before doing any resets.. Pleaseeeeeeeeeee Help
Any help would be GREATLY appreciated.
Cheers!!

I am sorry, but you have no way to recover ur contacts if you haven't sync it with Google Cloud, and to recover your files, just install an custom recovery such as cwm or twrp , and then boot into recovery, connect your phone with a pc or laptop, mount the sdcard, and backup your files.
Goodluck.
P/s: If you use Factory Reset option from HBoot, I'm afraid that your contacts has been lost.

3
I dont have an option of inserting SD card as HTC one x sets dont have that option.. anything else i can do?

SDcard is your internal stogare.
As I said, just install and custom recovery and use the Mount usb stogare option in twrp or cwm
my English is quite bad, I hope you can understand =="

I am bad in all these technical terms!!!! Can u please tell me step by step procedure from A to Z?? pleaseeeeeeeeeeeee???

Install a custom recovery, which you can find here in the forums and mount the /sdcard/ and save your files

i dont find a good android to downlod, all i find is update and i cant instal it in my htc one x, pls help me. where i find a android complet to instal. my phone dont have SO, because i delete SO.

pls pls help

i have htc desire 616
it's keep popup
unfortunately process gapps stopped working
can't access to menu or any apps mobile stuck on add google account and the popup over it can't do any thing settings not working
rest the phone ... same problem
wipe data .... same problem
pc can't read the phone too
or any os software
need rom via sd
or recover file
.img didn't appear in boot
plz i need help ppl

failed to hard reset htc desire 816 dual ...keeping restarting ..cant save settings !

hello all ,
i have htc 816 dual two years now .. i got SIM sockets repaired - i guess he may burnt some ic or something - ..after that phone keeps restarting " i guess on some processes writing to internal storage" , it also ignore any settings change when rebooting ,,i cant enable usb debugging ,,cant disable fast boot option ,,i mean i unchek or check any option ok but when it restarts nothing changed
tried unlocking bootloader , succeded but nothing changed ,trying factory reset from recovery it starts with error mount sd card 1 ,2,3,4,5 times ,wiping has no effect
not rooted ,stock 4.4.2 android, s-off ,loader locked ,cant install anything or change anything !!
any suggestions ??