Develop Bugs

can any help: ROm Upgrading problem

I was upgrading my XDA2, it said completed, and when i restarted it, the o2 splash screen appears with radio verson 1.17 and thats where it stays... can anyone help. I have tried reinstalling the rom.... but it cant see the pda, and aborts...
Help would be appreciated

Does your device have a bootloader mode? If so get it into, connect usb & start upgrade program. This works on a magician, maybe on yours too?
Regards, M

thank you for the advice, but it is himayalian model.....so i do not know it it has a boot loader.

Read & repair
Hi Smudge,
Take a look at this post & got it from the thread 'stuck in 02 splash screen' at http://forum.xda-developers.com/viewtopic.php?t=25830&highlight=himalaya bootloader 4th post.
RAGOv said:
well my friend i think somehow ur OS is lost and all u still have is the extended rom OS image,that's why u still see the splash screen...
i assume that ur device is a himalaya(though u did'nt mention any informations :wink: ),but if really is,then do the following:
1-log in to this forum as user:xda pass:xda
2-go to ftp server from the wiki page(up left ur screen)
3-go to himalaya folder and download any rom u would like 2 have(it can appear in several way,exe file or several files zipped in a .zip)
4-if it's and exe file and u have winrar,then extract the content in a folder,u will find 6 files(maybe less,rarely 1 file more-xda2nbftool.exe-),now forget about this file for the moment
u will need 2 file to fix ur phone:nk.nbf & HimauUpgradeUt.exe(i idvice u to dowload an O2 rom upgrade to prevent country id error wich can be fixed if necessary )
now that u have the tools,do the following:
1-press power button+navigation pad(the round one between the green and the red buttons)+reset b
utton SIMULTANESLY,u will enter bootloader mode(blank screen with serial on the upper side of the screen,number like 1.06 on the buttom)
2-put the cradle in usb port DIRECTLY IN UR COMPUTER NOT THROUGH USB HUB
3-put ur phone in the cradle while it's in bootloader mode,u will see that the serial word in the upper screen have changed into USB
4-run HimaUpgradeUt.exe and follow the on screen instructions,u will see a status bar,wait untill it finishes,hard reset ur phone,and here we go
i forgot to mension that u should put those 2 files(HimaUpgradeUt.exe & nk.nbf),in a separate folder,close any open task on ur desktop/laptop,and PUT UR CHARGER IN THE CRADLE for the battery don't run out...
hope i helped
tell me what happened with u dude,and remember that ur in the best PDAs developping site in the world,so don't worry,hopefully,everything can be fixed....
RAGO :lol:
Click to expand...
Click to collapse
Cheers, M

I canoot start, i cannot repair ROM

Hi, all, i have problem with my SPV 700 (HTC 3600) - Trinity.. When I turn on it, I see only start screen eith HTC logo, (you'll see it in attachments) there is only M 05 B05, R 1.50.08.11, g 32.83.7020.20h, D 3.00, i can do nothing... I cant reflash ROM because my computer cannot find it, and instalation write updater is old, you must find newer updater.. When i install acivesync, it cannot find too, but my installers (5 downloaded) will start, but write Cannot find hardware. (or mobile phone). Is any program, to connect my htc, or reflash ROM?
I found Schaps_WM6Pro_Trinity_4.30.2008_WWE_Full(p3600I) or some next, but every write cannot connect. Thank you very much.

Load from mini SD!?
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!

I cant go to tricolor display, i cant reset, i cant do anything, i thing it freeze.. sorry my english, im from slovakia. Or.. how I can go to tricolor mode? I try all combination clicks.

Power+Camera+reset button with ur touch pen

sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?

OverrideCrash said:
sorry, im stuppid, i now find reset button
FOR ALL RESET BUTTON IS NEAR USB CONNECTOR
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
but it dont work, i connect to pc, (no activesync but i connent) but when it sending new rom it still on 0% and cancel it.. i cant unlock CID. probably i havent good program.. I try HTC_Hermes_SIM_CID_Unlock_v3a and HTC_Trinity_SIM_CID_Unlock_v1, but nothing... this cannot find my device.. but HTC_Hermes_SIM_CID_Unlock_v3a find it, sending go to 7% but write I havent compatibile mobile phone with this software. What can I do?
Click to expand...
Click to collapse
Man please read from instruction from the passage named HARD RESET, the button you are talking about its for software reset only!
Use the seq. Power+Camera+reset!Keep each button pushed and then use stillus for reset and you will get the Tricolor screen - but first format your SD like i describe in the post #2 and then copy your ROM on it!

exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
check this thread
http://forum.xda-developers.com/showthread.php?p=1923734

manos4596 said:
exactly the same problem here. i tried to re install gelly_01 greek rom. The only requirement i did not follow was the connection with active sync. I am using Vista and the connection with the pc invokes the windows mobile device center. I tried to reinstall through a xp vmware with activesync but i get an error 270.
Any thoughts?
I am trying to find sth relevant.
thnx!
Click to expand...
Click to collapse
Hard reset your phone first, then use the bootloader method(Camera+Power+Reset then in the bootloader connect the usb cable)!
First try this http://forum.xda-developers.com/showthread.php?t=299659
If not - read carefully the instructions from here:
- http://trinityguides.info/index.php?option=com_content&task=view&id=39&Itemid=66 - all you have to know about hard SPL and how to do.
Anyway, also try to change the Rom image that you have used when you bricked your device!Try a new ROM by the date of release!

Thnx for the advice! I got it working. Before reading your reply I had started installing the original rom provided by htc (WM5). It installed correctly and at least i have my phone back. I will check your links about hard SPL (thanx ) but i had installed the gelly_01 rom before , not through vista though.
I will try to reinstall it.
It's getting late here so i will check it tommorow and infirm you.
Regards.

problem solved Its working now, but I dont know how i repair it
for unlock CID HTC_Hermes_SIM_CID_Unlock_v3a.zip (Its not compatibile, but my opinion is it unlock but dont repair rom) then i give there [P3600i] HardSPL v1.1.rar and end is Trinity_WM_6.1_NEW.OS_19965_Diamond_edition_by_Akeo_V3.1.rar all files are in attachments.
I give there HTC_Trinity_SIM_CID_Unlock_v1.zip too, before Akeo Diamond edition.
This can be closed now. Thanks for all thank you ! Here are lot of good peoples really thx

slimul said:
You can try loading your ROM from mini SD card !
You need to format sd card to FAT32 with Card Reader first!
Read this post:
http://forum.xda-developers.com/showthread.php?t=454123
and
http://forum.xda-developers.com/showthread.php?t=441787
Have you tried to hard reset, leave the device on tricolor screen and retry loading ROM?
Use the proper SPL to load!
If you are a Windows Vista user - the driver from this site it will be the sollution - search for it!
Click to expand...
Click to collapse
Thanks a lot . i had the same problem but now my htc is back to life

i
i still have the problem with the rom , i just do every thing and don't work can any one cold help me
sorry the bad english

Help-Artemis locked at startup screen

Hi,
I'm using Artemis with one of Tom's ROM. The device was working well. But today suddenly the device won't start up - it is locked at the startup screen showing the SPL, IPL etc. I can enter the bootloader.
Can anybody tell me how to flash the ROM at this stage?

Flash from bootloader
Hi!
Please download an official rom and keep pressed the Power and Record buttons. You will see a screen with 3 colors (red green blue). Connect the USB cable and wait for Activesync. After this start the original rom flasher and follow the instructions. If you can start the Windows, you should flash the USPL again and you can flash cooked roms. If you flashed a new one, i think you should also upgrade the radio rom.
Sorry for my English

well i'll give it a try.
BTW will activesync work if the phone is not booting up?

sure it will, but make sure you have the only phone pluged in, nothing else, and disable all firewalls and antivriuses.
Good luck

i flashed with htc official rom and it worked first. after soft resetting a few time (due to program installation) the phone again back to earlier state.
it is showing:
ipl 3.13.0001
spl 3.13.0000
gsm 2.94.90
os 3.13.0.0
and stuck at this screen.
i tried to update the phone again with the same rom - but i'm getting error 270.
do i need to unlock cid before flashing?
but i can't use the uspl tool as i can't connect to activesync.
pls help.

make sure the battery is fully charged again.
Restart your PC, isbale ll antivirus and firewalls
Better if flashing in XP PC
put PPC in Boating status
Flash Shipped ROM
Specify which software caused you the trouble and do not install it again
CID unlock PPC
Flash any cooked ROM.

once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)

archat68 said:
once i flashed the phone with the shipped rom successfully. The phone was CID unlocked then. But now when I try to flash the shipped again i'm getting an error message (error 292 or something - stating-invalid vendor id)
Click to expand...
Click to collapse
you must unlock phone again.

I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?

chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz

thormdac said:
chance are you have stuffed your bootloader...
start from scratch again by running uspl:
http://forum.xda-developers.com/showthread.php?t=311403
than flash your favorite rom again, ideally via sd-card-flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
Click to expand...
Click to collapse
USPL needs activesync running. Can you tell me how to run USPL when I can't boot into windows?

well,
its been some time, but i am pretty sure uspl puts your device into bootloader and operates from there...
have you tried setting it into bootloader, connecting via usb and simply starting uspl?
running a normal setup-routine, there is no need to start it from wm either-simply put it into bootloader and start setup!
greetz

Well i tried that. But it seems that USPL doesn't work without activesync.
i've also tried flashing with SD card, but after a brief "Checking SD card content" message the phone goes back to bootloader.
Someone helpppp pls.

are u sure your sd card is correctly configured, according to the wiki entry- especially part "if above fails" ...?
if all steps fail, assumed you performed them correctly, you might try taking out battery and leave the device fully without power overnight...and restart it the next morning

I've used a 512MB SD card - formatted it- and copied the OS file as ARTEIMG.nbh - put the sd card in the phone and started the phone in bootloader mode.
I think there is nothing more to do.
I can enter the bootloader, connect the phone to PC in USB mode. So, I hope that my phone is not bricked.
But how to revive it?

if you are in bootloader, i dont see why you shouldnt be able to flash!!!
try another sd-card, use another xp computer, exchange the usb cable...
yust to be certain: have you left out battery over-night?
...and what are the details stated on boot-loader screen (numbers)?
oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32

thormdac said:
(i)...and what are the details stated on boot-loader screen (numbers)?
(ii) oh, and I get the feeling you are not working exactly as told:
in your PC right-click on Computer, then select Manage
Select Disk Manager and then delete existing partition
create a new partition with max size 256MB
format this partition in FAT32
Click to expand...
Click to collapse
(i) See post no 5 for the details
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.

archat68 said:
(ii) You can not do this with a removable disk (SD card inserted through a card reader). Only works when you can get WM5Storage to work.
Click to expand...
Click to collapse
...i dont have my micro-sd-card-adapter at hand atm., but there sure will be possibilities formatting your sd card accordingly...try administrative tools/computermanagement/storage/diskmanagement under xp, boot your pc with a diskpartitioner like acronis disk director...
i can only advise you to keep trying...but as long as you can not say for sure sd-card-flashing is working correctly, i wouldnt give up...
and as far as flshing bootloader via usb/activesync goes, i can only say i once screwed my device due to insufficiant battery power during sd-card-flashing and thought it was bricked just at the point you are stuck now!!! - totally resetting it with the power-oiut-method, i.e. battery out overnight, revived it!!!
than agin i sure as hell did everything the way it was ment o be done...and nothing worked until i switched to another pc/ usb-cable!!!
so, to sum it up, DONT GIVE UP!!! bootloader is showing...so there must be a way to get this to work...
greetz

archat68 said:
I tried flashing the device with factory shipped ROM. but i'm getting Error 294-invalid vendor id message.
please suggest what to do?
Click to expand...
Click to collapse
Somebody please help me to revive my phone.

how can we help you, if you dont provide us any results of the steps suggested to you...ideally in a way so we can see what you actually did or didnt do, precisely as told ?!?
greetz

How to upgrade ROm with nbh file

As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).

The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.

thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted

stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .

You can download my ROMs, they come with the full package

trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...

stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?

Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP

Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.

strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?

Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.

From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.

thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading

stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )

Lol I can't belive I forgot to tell you that!

It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?

Thank you, here you go!

sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!

nevermind, it worked ok on the second attempt!

HardSPL + MTTY, an almost bricked HTC Diamond!

I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
blanktruth said:
Ok, first of all I did not think that it was this dangerous to use MTTY!.
I followed everything and came to these lines
---------------------
Cmd>task 8
Cmd>
---------------------
But after Cmd>task 8 my device restarted immediately before the second line Cmd> appears and I panicked and disconnected my device and pushed the wrong buttons while "Touch Diamond" logo was on the screen.
Now, nothing happens. I can not start from the beginning because I can not start the bootloader by pushing Vol Down and the small red reset button...
Is there anything else left for me to try? Or should I throw my HTC to garbage?
Click to expand...
Click to collapse
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?

i have the same probnlem!! with my diam300
my bootloader show not Diam300 64m but only 64M on the first position in 3color mode... plz help

Connect the Diamond and run the customruu.exe from your desktop, this should work.

how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....

blanktruth said:
I really need some help!
I was following the the post The DEFINITIVE MTTY Thread!! REVISED 02-11-09 and I made a mistake as follows;
Now, I do not know how, but I brought my HTC to bootloader mode and now I can see it via MTTY. But I mistakenly formatted the Internal Storage while I was trying to bring my HTC to bootloader.
Is there any way to upload the DIAMIMG.nbh file to Internal Storage? Or should I follow a different way to save my HTC Diamond?
Click to expand...
Click to collapse
The only thing to do now is to flash back a stock ROM or use a custom ROM with the RUU.

Solved!...
Dom1n8tr1x said:
First of, your device is supposed to soft-reset after the "task 8" command and you should have been holding down the "Volume Down" and "Back Buttons" to begin flashing your new ROM. The whole idea of using MTTY is to format your Main Storage and flash a new ROM. Therefor you should have loaded the ROM that you wanted to flash onto your Internal Storage.
Click to expand...
Click to collapse
Thank you for your reply.
Actually I had uploaded the ROM to my internal storage, but during trying to bring my phone to bootloader mode, I formatted the internal storage...
Anyway, what I did now is, first I opened the USB Connection feature from ActiveSync, and then used CustomRUU.exe to Flash the ROM...
Everything is solved now...
Thank you very much all...

ilijan said:
how to connect if i used mtty... its clear everything what i have on device storage and in bootloader canot start stock or developed rom...
if i want start hard spl its say invalid model it....[/QUOT
bootloader is all you need to revive the phone
connect it to usb in bootloader mode and just install an oficial diamond rom from an windows xp pc.
it's easy
Click to expand...
Click to collapse

plz write here step by step guide how you solved

How it was solved...
ilijan said:
plz write here step by step guide how you solved
Click to expand...
Click to collapse
Actually the most crucial part was to bringing phone to boot loader mode. And I think I managed that by pushing the Volume Down and Back (the arrow pointing left) buttons immediately after restarting my phone. And I had to do this after taking out the battery and putting it back after 5 sec.
When I pushed these buttons at the start up the phone tried to install the ROM from my internal storage, but as I explained I had deleted it by mistake. Therefore it could not find the ROM. I disconnected my phone from my PC and the screen started to say something like Retrying USB connection or waiting for USB connection, something like that.
I restarted my PC in Digitally Signed feature disabled by pressing F8 during start-up. Reconnected my phone to PC (the screen of the phone was still blinking as waiting or retrying usb connection). And voila the phone screen changed to boot loader mode...
The rest was easy. I opened the USB connection feature from ActiveSync and used CustomRUU.exe with a ROM to flash my phone...
That is all...

1. plug phone in to computer in bootloader
2. run customruu or stock from rom update on computer
3. wait for rom to flash to device
4.???
5.profit

but my booloader dont show model ID: DIAM300 64M what i had befor
and show me only: 64M
and any flash error with invalid model id, i canot flash, rom, stock rom, or hardspl...
understand me.. im not totaly noob... i used mtty X times... but now have this probles

can somebody help me?
my diamond dont have model id...
before i had in bootloader mode DIAM300 64M model id, but now i havent got... its show only 64M,
every rom flash stopped at 1% cose model id error,
every hard spl falsh finished 100% but after flash when device restart write model id error...
i cant do anithing... can somebody help me?

For everyone facing problems after flashing his/her device, take a look at the link in my sig.
There you can find a guide to restore your diamond.

you dont understand me..
i canto flash any rom any hard spl becous my diamond dont have device ID...
in bootloader dont show DIAM300 64M but only 64M
after all flash say error mobile ID...
i try mtty, hard reseted, soft... and nothing
after start its show me only first stock screan, the red text on the right bottom sight dont start: 1.17.25.14
2.100000
geny d2x
its maybe wrong but i forgot what waz here...
how can change device model ID? form 64M back to my stock DIAM300 64M?

Try another version of Hard-SPL, some people report that 1.40 not fully works.
I suggest you try 1.94 Olinex.

my diamond is death... if somebody know how can heal it... plz write me...
my device ID is missing... so i cant flash any rom, any hard spl, any radio...

try this? http://forum.xda-developers.com/showthread.php?t=409425&highlight=invalid+model+id

im not sure but i dont think one can brick his/her phone after hard spl, thats the reason of hard spl in the first place that u dont brick it. boot loader is always present

Guide
if you are using Windows XP try the following steps:
Connect your device to your PC
In Active Sync > connection settings > check Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.

Guide
if you are using Windows XP try the following steps:
Connect your device to your PCIn Active Sync > connection settings > check
Allow USB connections (which you have un-checked while doing MTTY)
Find a ROM with CustomRUU.exe / diamond wrapper
Now enter into bootloader mode(forget about the device ID)
Go to customRUU.exe and run it
Follow the ROM installation steps
This will help you installing your new ROM.
I had a similar problem and i resolved it by follwoing the above steps.