Develop Bugs

Magician - No Gsm Problem

Hello, i recently tryed to flash a new rom on my magician and when i was flashing it the magician went down ( discovered later that i didnt fully charged the battery ... i know ... im a noob ) , now appears "No Gsm" when i turn on the pda. I can go to windows i can flash Rom + Extrom, i cant upgrade via sdflash it gives me an error " Not Allowed " what is this ? I've tryed several commands in console but no sucess. Can this be fixed whiout jtag way ? Please help me out. Regards

Can any1 help me out ?

Urgent Help Needed!

Hello....I bricked my I927 when I accidently formatted my efs partition when using EFS professional .....my phone boots in download mode.....but only boots till samsung logo screen.....I tried various things like installing stock GB and ICS through odin and installing custom firmware but phone boots onle till samsung logo and then lights up with sone stange colored thin lines and screen goes off.....In TRWP I get a "unable to mount preload" error whenever I try to install somethiing.....I suspect that the EFS partiton is corrupted and needs to be repartioned....I had backupped the efs folder when my phone was working before.....its in a tar format.....I read somwhere that someone made a recovery.zip out of his backedup EFS.IMG and flashed it with CWM solved his problems which were exactly similar to mine.....can somebody on the forum make a recovery.zip for I927 with update binary and script so that I can add the backedup EFS image to it and flash it with CWM? Please.....this would also help many others who are facing similar issues.....and also what do I do regarding the "unable to mount preload" error? I need to repartition and tried to install hemdall.....but get the common .dll error even after following all the instructions and installing C++ 2010.....

Hi, k one thing after the other.
Do you have repartitioned anything?
Do you have adb in place and does adb works when in TWRP?
The easiest thing would be to connect by adb then mount /efs and then restore the efs backup. The good is that you will have a good chance to recover your device. Maybe you need to reformat /efs but that depends.
Which timezone do you live? Maybe a Teamviewer session would be helpful?
.

Thank you for your reply sir...
THANKS FOR THE REPLY SIR....YES I WAS ABLE TO GO INTO CWM RECOVERY AND CONNECT THE PHONE WITH MINIMAL ADB FASTBOOT.....AND AFTER SPENDING ALMOST 2 DAYS CONTINUOUSLY TRYING TO FIND THE PROBLEM USING GOOGLE, I TRIED DIFFERENT COMMANDS ON ADB TO GET EFS BACK OJ THE PHONE....BUT WITH NO SUCCESS...... MY EFS BACKUP IS IN TAR FORMAT......IT WAS MADE USING GALAXYSIMUNLOCK BY SPOCKY.....I LATER TYPED IN 'ADB MESG'.....OR SOMETHING SIMILAR TO THAT COMMAND, AND FOUND OUT THAT ALL THE PARTITIONS ON mmcblk0 were mangled up with strange letters.....for eg, p1, p2, p3 and so on had strange characters written next to them.....SO I TRIED TO RE-PARTITION THE WHOLE THING WITH SDPARTED......AND IT RE-PARTIONED THE SYSTEM (AROUND 7000MB).....MMCBLK01 (AROUND 500MB).....AND ANOTHER THING I CANT REMEMBER NOW.....BUT WHEN IT FINISHED THE JOB, IT GAVE ME A mmcblk02 ERROR.....AND WHEN WHEN I CHECKED MY PHONE ON CWM SCREEN, IT GAVE ME A LIST OF CACHE ERRORS.....AND WHEN I SWITCHED OFF THE PHONE AFTER THAT IT REFUSED TO POWER ON.....IT WAS NOT EVEN GOING INTO DOWNLOAD OR RECOVERY MODE.....BATTERY HAD ENOUGH POWER....SO ITS NOT BATTERY FAULT......I SUPPOSE THAT SINCE THE PARTITIONS WERE FORMATTED THE PHONE BECAME COMPLETELY DEAD......CAN YOU TELL ME IF THERE IS ANY WAY WHERE I COULD GET THE COMPUTER TO RECOGNIZE MY PHONE USING A 'DEAD PHONE USB FLASH' OR SOMETHING.....AND THEN FLASH A BLANK BOOTLOADER AND THEN WRITE CWM?
I LIVE IN INDIA SIR.....+5.30 GMT.....I DO NOT KNOW ANYTHING ABOUT TEAMVIEWER.....IS IT AN ANDROID APP? CAN YOU EXPLAIN MORE IN DETAIL SIR?
PLEASE LET ME KNOW HOW TO GET THE COMPUTER TO RECOGNIZE THE PHONE AGAIN......

Well.. that sounds not that good...
Teamviewer (www.teamviewer.com) is an easy to use and free remote control software for your PC (it runs on both Linux and Windows). We could do a remote control session if you like. I can try to help but cannot promise anything.
I live in Germany: GMT +1. Send me a PM if you want to give that a try. Next Monday. Tuesday or Thursday would be possible on my site. At least for getting a short overview.
.

Thank you sir,
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....

alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Ok I have made one. It want to say it was VERY hard to find the correct instructions to do so and therefore I'm absolutely not sure if that will work for you!
Test it if you like but again: I have no idea if that would damage anything more than it is now!
See --> http://forum.xda-developers.com/cap...od-unbrick-debrick-hard-bricked-i927-t3285505
If it worked for you (would be like a miracle) then please report back!
If it does NOT work for you please report back, too!
thanks
xdajog
.
UPDATE:
Besides the link I posted --> Could you please also try the following:
1) Power on your device and directly after that:
2) Press and hold down Vol Up + Vol Down (both the same time)
3) You should see a warning message like the attached one which is the APX mode
4) you need to release the vol buttons immediately after you see the APX mode otherwise it will continue to the non working download mode.

Does teamviewer require internet connection with a lot of data?
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....

alvcross said:
Thanks for the reply Sir.....I believe using teamviewer requires a internet connection with good amount of data.....I have an extremely slow 2G internet connection here in India.....I searched google to find some solution for the bricked I927......and came across many posts where people have used the 'unbrick.img' which was specifically made for their samsung phone models on their SD cards to resurrect their dead phones.....The method involves creating a 'unbrick.img' with emmc files extracted from another working I927 and then writing the image on an external SD card with some linux commands or win2image software and then inserting the SD card into the dead phone and switch it on by which it goes to download mode.....once in download mode I can flash CWM or TWRP and also flash stock firmware through odin and recover the phone.....Since your a developer who is well versed in things pertaining to this, can you make a unbrick.img file for the I927 and upload it here Sir? It will be very helpful for others also on the samsung glide subforum, as there is no proper 'hard unbrick' thread for the glide on xda......Ill be very grateful and thankful to you for all your help Sir.....
Click to expand...
Click to collapse
Uhm do you have read my above post??
.

1927 wouldn't boot.....Help.
Ohhhh Thank you.....thank you.....thank you for your kind reply Sir.....how good of you to take all your precious time to help me.....I greatly appreciate all your hard work Sir.....wonderful...*.I wanted to download your img file to try it out and when I read the reply of brother Bubor, that the I927 woudnt boot from the SD card when the bootloader is bricked, I was very disappointed. Like I said before, I have a very very slow internet connection with very less data left....and according to brother bubor's reply I doubt this will work....It looked like he was sure that it wont work....I tried to get into APX mode as the link that brother bubor posted had mentioned, but no luck, as the phone is not going into APX mode.....I remember that when I was trying to get to the APX mode the first time, the computer flashed a notification that the APX driver was not successfully installed.....but after that I tried the method more than a dozen times, but the computer was not recognizing the phone to go into APX mode.....Does the phone go into APX mode when the full internal phone system is formatted? I tried your second method on trying to get to APX mode, but nothing happens.....the computer is not recognizing the phone.....The battery had about 30% power in it when the phone got bricked 2 weeks ago.....Dont know if the battery drained all these days of not using the phone.....And even if I get to the APX mode, I have no idea how to proceed from there to repartition the internal phone system and get back download mode.....In the link that brother bubor posted the person who made the thread has made some files to be used when one gets into APX mode.....The PIT and emmc files which are necessary for repartitioning the system and getting the bootloader work are found in that zip file.....But that zip file is for the I9103 Galaxy R.....there isnt something like that available for the I927 yet.....And is brother bubor sure that the unbrick.img file wont work on the I927?

Give it a try with my unbrick image.
we all don't know.
.

xdajog said:
Give it a try with my unbrick image.
we all don't know.
.
Click to expand...
Click to collapse
Hi @alvcross: any update on this?
have you tried the SD card unbrick?
You said you cannot open the APX mode but what happens when you press the buttons for accessing the APX mode?
Try it even if you see a blank screen and then connect your Cappy with USB to your computer --> you should get a message about a missing driver or similar.
If that works I tell you how to proceed.

xdajog said:
hi @alvcross: Any update on this?
Have you tried the sd card unbrick?
You said you cannot open the apx mode but what happens when you press the buttons for accessing the apx mode?
Try it even if you see a blank screen and then connect your cappy with usb to your computer --> you should get a message about a missing driver or similar.
If that works i tell you how to proceed.
Click to expand...
Click to collapse
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?

alvcross said:
im so sorry that i was missing in this thread for a long time now sir.....i have had some issues at home and they have been sorted out lately.....yes sir.....i tried the sd card unbrick image....but my nothing happens.....when i try to hold volume up+power+home buttons and insert usb cable into my computer it says installing drivers and then says drivers failed to install....and nothing happens further.....can you help sir?
Click to expand...
Click to collapse
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app

xdajog said:
Ok so you may try to install the special apx drivers now. Unfortunately I'm on vacation right now so I cannot upload them elsewhere. I come back to you next week.
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....

alvcross said:
Oh yes Sir....Ill be waiting for the special apx driver package from you....Thank you so very much Sir.....God bless you.....
Click to expand...
Click to collapse
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app

xdajog said:
No guarantee ! [emoji121]
Sent from my LG-H815 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes Sir....I understand....

alvcross said:
Yes Sir....I understand....
Click to expand...
Click to collapse
Ok could you please try these driver package here: http://forum.xda-developers.com/galaxy-nexus/development/adb-fb-apx-driver-universal-naked-t1379875
Follow the instructions there for installing
The next step (if the driver would work for you) will be to flash a working PIT to your device to make sure you are using the correct partitions.
Afterwards we will flash the bootloader (may absolutely brick your device if not done correctly) and then --> if all goes fine --> you should be able to flash in download mode whatever you want to.
So it is still a long way to go and I need to check all the steps first before actually we can proceed.
That may take longer so do not expect that this will be something in the next days.. sorry.
Update:
If the above universal driver do NOT work for you: Test these one here View attachment apx_driver_samsung.zip
.

Thanks for the speedy reply Sir......Ill do as you said and let you know Sir......thank you.....thank you.....thank you Sir....

wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?

alvcross said:
wooowwww......windows installed the drivers for the phone and it shows up as "NVIDIA usb boot-recovery for mobile devices." But when I open minimal adb and fastboot and type 'adb devices' the phone doesn't show up in the 'list of devices attached'....the line after 'list of devices attached' is just empty.....Also the phone doesnt show up in odin....what should I do next Sir?
Click to expand...
Click to collapse
nvidia apx isnt fastboot/adb device. You can found tool on nvidia site ( more info https://ac100.grandou.net/nvflash ), this tool can read and write whole flash.
Before you could use nvidia's tool, you must send an uniq blob to your phone. APX mode is useless without this blob.
This blob is uniq for every phone.

[Q] Hardbricked LG G3

I tried to flash a D850 with lg flashtool and it gave me a " partition change error ", so i've put the dll that doesnt verifie the version , the device start flashing but then it turned off and became a hardbrick.
So, i tried to unbrick it with BoardDiag and got the error "No response from the device. Check PMIC first and if still boot problem, replace AP" when i repeat i get "device was not found in dload trying flash programmer"
i get it that the BoardDiag doesnt do the AP msm8975ac , so if you could help it would be great
P.S. when i use androidbrick_G3_fix.exe , and choose D850 i get Hello requst error , but when i choose D851 i passes and no error found but cant repair because device log out and in after scan is over , so does that mean i have a D851 ??? coz it is written D850 in the back of the phone
i really need ur help

huawei g8 rio-l01 stuck in run mode:factory

Hi everyone ,
(first sorry for my bad english)
i got a g8 rio-l01 with a few problem ( no imei , no sn , no wifi and bt mac adresse) all this problem was solved using the hcu tool
but the biggest problem is the phone boot in a factory mode ,i can see this in the projectmenu>veneer informaton>other info>run mode: factory
so in this mode :
1-i have no shortcut panel and notification panel when i slide from up to down nothing come
2-no signial or network conection
3-in the first home page in the phone i have MMIs app/software upgrade/MMI/projectmenu/MMIa,
in the second one i have runningtest3
in the last one basic android app
4-i can't use keyboard
so i have trayed i think all huawei g8 firmware and nothing change
trayed with DC phoenix methode (the two methode) and same problem
trayed with the original soft (RIO-L01_M105_Board Software_general_Android 5.1_EMUI 3.1_05021TJY) and no change
trayed with l02 ,l03 ,tl00 ,slim6 and cm13 and the problem persist
bootloader and frp are unlocked ,sim too with hcu and phone rooted
if i remove appfac from user data and reboot the keyboard Appears and other app Appears but the phone stay in factory mode with no upper pannel and no network signial
i can use wifi and bt
in fastboot getvar pruduct give msm8916 (it's normal??? the phone is an msm8936)
i think there is a currupted or a missing file or partition
i have all factory flash file
bootloaderimage: huawei_msimage.mbn, MPRG8936.mbn (i don't know how tu use this two files)
fastbootimage: boot.img, ,cache.img ,cust.img ,emmc_appsboot.mbn ,erecovery.img ,frp.img ,fs_image.tar.gz.mbn.img ,gpt_both0.bin ,hyp.mbn ,log.img ,misc.mbn ,modem_st1.mbn ,modem_st2.mbn ,NON-HLOS.bin ,oeminfo.mbn , persist.img ,recovery.img ,rpm.mbn ,sbl1.mbn ,system.img ,tz.mbn,userdata.img ( and all crc file )
any idea are welcome
thank you

Hi again
So after many test ( and break and unbreak the soft many times) by editing prop and conf files, i noticed that the ro.runmode is the command controling the boot mode.
But i don't know were is this command and if it's possibol:
- To force ro.runmode=normal?
- Or any solution to by pass runningtest3 app or to fake the result?
Thank you (any help are welcome i don't worry about bteaking the phone)

Finally the phone is fully dead ?
After many flash factory, stock and custom i decided to find the way to enter to hs-usb 9008 mode and i find,by flashing the phone with cherry honor 4 rom. And the phone rebooted in 9008 mode, than flashed the ddr and the msm8936 file with zte tool. The msm will not finish and the phone reboot in fastboot (with red, green,blue screen) than reflashed factory rom with dc unlocker the phone rebooted normal but with the same problem that i have in the first.
Second try, flashed with cherry, entred 9008 mode,reflashed with zte tool (by error used a bad msm8936 file from lenovo)
And the phone stop working not detected and black screen
Third try, desassemled the phone, removed battery find test point after many risky test,the phone boot again in 9008 mode.
Reflashed with zte tool, enter red green blue fastboot, and decided to reflash all the factory with fastboot flashall méthode to unbrick an msm8916. Fastboot finish with many failed.
The phone rebooted but black screen and blinking led with continus (red,blue, green), not detected in pc, trayed with test point and nothing
I think it's fully dead now
Sorry for all this long text but just to share expérience
Thank you

And no it's not dead 😁, find the way to boot it again in 9008 mode with shorting two test point
Here we go for other test

السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man

xzanium said:
السلام عليكم
hello friend
have you tried to flash the OEMINFO partition (if not be careful because the unlocked code of the bootloader will be changed and you need to read the new one with hcu client)
if you dont know how to do, tell me
sorry for bad english I'm not english man
Click to expand...
Click to collapse
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you

How To Get Oeminfo
makabress said:
allrady solved my problem with an oeminfo but it work only single sim i need an other oeminfo with dual sim
thank you
Click to expand...
Click to collapse
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..

hellowbd said:
makabress Please clear here how to get oem info and write it.. i m alredy face same problem..
Click to expand...
Click to collapse
Hi , i found the oeminfo searching in google. I will try to find it again

hello
i a have the same prolem but i cant find "the service rom" too, my phone is stuck in mode 9008 i tried to do the rom by myself but witouth any succes.... i read in a post that i cant try to put the "Huawei_Honor_Cherry_L04_V100R001C900B150_India_4.4.4_EMUI_3.0_05021SLQ" who has the same structure but cannot flash phone said "bootloaderimage" fail
please anyone can help me? i am 2 months witout phone... sorry about my bad english im a spanish guy

rio-l01 test point
hi, please i can't found rio-l01 test point can you help me

rmili25 said:
hi, please i can't found rio-l01 test point can you help me
Click to expand...
Click to collapse
test point are in the left/right side of the display connector, you can use a small wire to short it

JoseBankai said:
test point are in the left/right side of the display connector, you can use a small wire to short it
Click to expand...
Click to collapse
thank you brother

please i have the same problem ( rio-l01 no service no call ) can you help me please by oeminfo file or other things
excuse me i'am bad in english

still having the same problem, no solution, try to resoldering emmc, processor, voltage are ok, everything works in other board, so the problem is still the **** mode 9800 and the vanished "service rom" (not trully vanished but every service that i call to fix this ask me for a lot of money just to fix 1 phone... not worth it..) hope somebody can explain this at least, and why is happening, maybe one day can recovery my data on thtat phone....

Asus flash tool showing failed

hi..i have hard bricked my asus zenfone 551ml 4gb/32gb.lost bootloader,recovery everything.set was just vibrating and black.then used xSTFS loader and now regained bootloader..but when i try to flash raw image via asus flash tool it shows FAILED(wrong image format).i tried several times but same.it shows my serial no 123456789ABC..now i m really puzzled what to do.as most who bricked their set were succeded by this method here..so what should i do now? i dont have any asus centre here.plz help.thanx

serial number 123456789ABC is normal if you have ever used xFSTK program to reload the entire boot chain.
I gathered from the internet that Asus Flash tool will hang after it reloads the correct serial number. It thinks it is communicating with a phone that has SN 123456789ABC but then at some point the phone switches SN and Asus Flash Tool hangs.
You can get around this hang using several methods
1) restart computer after asus flash tool hangs
2) use second computer to load RAW image after asus flash tool hangs
3) Going into Windows Device Manager and disabling the Android bootloader device then re-enabling it (after asus flash tool hangs)
You can tell Asus flash tool is hanging when you run "fastboot devices" command and you see a device that is not serial number 123456789ABC
RAW image (to my knowledge) is only for xFSTK program.

kaiser4782787890 said:
serial number 123456789ABC is normal if you have ever used xFSTK program to reload the entire boot chain.
I gathered from the internet that Asus Flash tool will hang after it reloads the correct serial number. It thinks it is communicating with a phone that has SN 123456789ABC but then at some point the phone switches SN and Asus Flash Tool hangs.
You can get around this hang using several methods
1) restart computer after asus flash tool hangs
2) use second computer to load RAW image after asus flash tool hangs
3) Going into Windows Device Manager and disabling the Android bootloader device then re-enabling it (after asus flash tool hangs)
You can tell Asus flash tool is hanging when you run "fastboot devices" command and you see a device that is not serial number 123456789ABC
RAW image (to my knowledge) is only for xFSTK program.
Click to expand...
Click to collapse
but it doesnt hang..just shows failed wrong image format

dr.estiack said:
but it doesnt hang..just shows failed wrong image format
Click to expand...
Click to collapse
problem solved...flashed via fastboot

dr.estiack said:
problem solved...flashed via fastboot
Click to expand...
Click to collapse
can you tell us what u have done to fix it??
i am facing something like you, cannot flash using AFT because after i click start on AFT, it always show "Flash image failure (FAILED (wrong image format))"
tried download raw file few time, in case corrupted, different version and different AFT version, run as administrator but still no luck still showing the same error
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT.
i am facing some problem with asus zenfone 2 ZE550ML (Z008)
and decided to flash it so maybe the problem will gone...i maybe gonna create my first thread here about it, i hope i can get some help and fix it myself...

kim7tng said:
can you tell us what u have done to fix it??
i am facing something like you, cannot flash using AFT because after i click start on AFT, it always show "Flash image failure (FAILED (wrong image format))"
tried download raw file few time, in case corrupted, different version and different AFT version, run as administrator but still no luck still showing the same error
in fastboot mode, my serial number is looks normal but "bootloader version - unknown"...
i wonder if the phone bootloader have been unlock, so it cannot be flash using AFT.
i am facing some problem with asus zenfone 2 ZE550ML (Z008)
and decided to flash it so maybe the problem will gone...i maybe gonna create my first thread here about it, i hope i can get some help and fix it myself...
Click to expand...
Click to collapse
just send the commands via fastboot...follow the thread
https://forum.xda-developers.com/ze...ked-phone-updating-to-mm-tips-t3452785/page66

dr.estiack said:
just send the commands via fastboot...follow the thread
https://forum.xda-developers.com/ze...ked-phone-updating-to-mm-tips-t3452785/page66
Click to expand...
Click to collapse
you refer to the step "Flashing Firmware Without AFT", right??
because the phone which i wanna flash is not bricked yet, it still can turn ON normally. i just cannot hearing call in and out (not hardware problem since i still can hear and speak if calling using apps like Whatsapp, BBM, IMO or other chat apps). and also the IMEI of SIM 2 is unknown/Null...but the SIM 1 still can be used and the IMEI is there...tried update to latest OTA didnt solved it, so i think maybe need to be flashed using AFT.
so i did not do the steps before it...i wonder if it still OK??...

kim7tng said:
you refer to the step "Flashing Firmware Without AFT", right??
because the phone which i wanna flash is not bricked yet, it still can turn ON normally. i just cannot hearing call in and out (not hardware problem since i still can hear and speak if calling using apps like Whatsapp, BBM, IMO or other chat apps). and also the IMEI of SIM 2 is unknown/Null...but the SIM 1 still can be used and the IMEI is there...tried update to latest OTA didnt solved it, so i think maybe need to be flashed using AFT.
so i did not do the steps before it...i wonder if it still OK??...
Click to expand...
Click to collapse
it was ok for me..my set was hard bricked..even no bootloader..mine is 551ml. i spent 2days searching and found fastboot method other than aft.