Hi,
I received a complaint from a friend of mine that her galaxy nexus stopped working. She dropped the phone off at a service center, and they told her that it was a hardware problem - specifically the "flash ig" inside the phone was broken. I tried looking this up but no info could be found.
What happened was that basically her phone underwent a hard fall and a portion of the screen on the bottom right cracked. However the phone worked normally for the next 2 days. After that the phone just turned off and no attempts were successful in turning it on thereafter.
I took a look at the phone, tried resetting it in every way possible, but nothing works. I believe the screen flashed for a brief second around 10-15 minutes after i plugged the phone into my laptop, but im not sure. Other than that, it's basically a paperweight at this point.
Can anything be done for the phone, any hopes or possibilities? Please let me know. Attached a couple pics showing the crack.
Thanks.
can anyone help with this?
Without seeing the actual damage, no one can say for sure. It could be as simple as resoldering one connection on the pcb, or it could be toast. Trust me in the no one is clairvoyant enough to determine what the damage is without actually opening it up to see. There's not much to lose at this point, so you may want to open it up using one of the teardown guides online and see if anything jumps out at you.
Related
Hi,
When I tried to unlock my phone this morning the screen didn't turn on so i figured the battery died on me. I connected it to the charger but it didn't do anything. A few seconds later i suddenly got a notification sound and the LED started blinking but still the screen wouldn't come on. I tried tapping some random places in the screen and I noticed it responded to my touch, by now I started getting scared the screen might have died on me.
I pulled the battery and tried to reboot the phone, same problem, screen responds but doesn't display anything, not even the google logo.
Then I tried getting in the bootloader, same thing here, got into bootloader but screen didn't display anything. I figured it might be a problem with the bootloader or whatever so I flashed the factory image from Google but the problem persisted.
The phone was working perfectly yesterday and it hasn't dropped on the floor or got wet, it just sat on the table all night long.
So is there anything else I can do? Has my screen just died randomly on me?
In case the screen needs to be replaced, will Samsung do this for free? I'm not sure if it matters but I'm in Europe.
Anyone? I'm quite desperate here.
scipicore said:
Anyone? I'm quite desperate here.
Click to expand...
Click to collapse
anyone get any idea with this problem i'm having the exact same problem
phone was fine untill yesterday evening (i've had the phone just over a year), i got a message ( i heard the notification sound ) went to unlock the phone and nothing, so i tried pulling the battery, restart the phone and still nothing
led works on the phone, it boots play sounds recieves message etc and the touch and feed back works so you can push random buttons but the screen is completely blank
no cracks, no water damage
Twisted701 said:
anyone get any idea with this problem i'm having the exact same problem
phone was fine untill yesterday evening (i've had the phone just over a year), i got a message ( i heard the notification sound ) went to unlock the phone and nothing, so i tried pulling the battery, restart the phone and still nothing
led works on the phone, it boots play sounds recieves message etc and the touch and feed back works so you can push random buttons but the screen is completely blank
no cracks, no water damage
Click to expand...
Click to collapse
I sent my phone in and it turned out I had water damage, even though I'm sure it never ever came in to contact with water or even moisture. Had to buy a new one, no refund or anything. Even had to pay €200 to get my broken phone back.
I hope you have more luck than I did.
You got ripped hard, water damage is an excuse the telcos use to get out of replacing your device, its a widespread practise, sounds like your phone had a hardware fault and should have been repaired or replaced.
If it happens again insist on proof and explain you know your rights and will pursue a formal investigation with whatever is the relevant consumer authority in your region.
Dont take no for an answer and be prepared to politely but firmly argue for your rights and also escalate the complaint if not satisfied with the sellers response.
It is not unusual for mass produced devices to have hardware faults, but water damage is a total copout by the seller.
For example it is estimated that between 0.5% and 2.5% of sgs3 i9300 devices have faulty batteries which leak and damage internal hardware, and typically the seller will blame the buyer for water damage (more $ for them) rather than replace the device (no $ for them).
sent via xda app from starkissed maguro gnex paranoid beta9
Hola, noob here with a problem.
My rogers captivate glide was behaving perfectly fine one night when I decided to download some large files over wifi. It was also plugged in for charging and I was using some app (forgot the name) to prevent my screen from turning off so I won't lose my wifi connection. I left it like that and went to sleep. Upon waking up, my phone was hotttt , the screen still on but it has faded into a greenish color with scan lines. It was unresponsive and I had to pull the battery. Ever since then, my phone would last no more than a few minutes before freezing and fading into scan lines. I thought it was a battery issue, so I got new batteries but that didn't help one bit. I even flashed the kernel and still no help. I did resets, recovery, wiped caches, took out sd card and sims, stock builts. Nothing worked. I can't connect the phone to the computer or wall charger either. The screen would instantly freeze and fades out upon plugging in the micro usb cord.
Have anyone had similar problems? Did I fried the soc? I don't think it's a problem with the screen since it was perfectly responsive the few minutes it worked. This noob needs helppp.
I've posted a video on youtube but I couldn't link to it, but if you search "captivate glide problem" you'll see a video showing the freezing problem I have. I'm from the US also, so I don't know if I could get samsung to fix it through warranty since the phone is Canadian.
Well I downloaded Modern Combat 3 and that was like about 1Gb and the screen turn off because I didn't touch it while it downloaded, and wifi kept going so I'm not sure why it didn't stay on for you
Sent from my SGH-I927 using xda app-developers app
Idk about the phone so much , but i am computer technician and it sounds like you overheated it, what we might call "burned it up".
The screen symptoms you have described are a dead giveaway, especially the lines
If this was a laptop, I would be sending it off for a reflow .
Typically, the circuit board gets so hot, the solder on the ships melts enough for a tiny bit of separation. This requires a "reflow ", where specialized equipment is used to repair the solder connections.
First, you should to a factory reset , then try to do a warranty claim. (unless u have insurance from your cellular provider, then u might check with that)
*edit, sorry, I missed the warranty part the first time I read ur post*
The next option would be to check with the guys at www.mylaptopisbroke.com
Email them, ask if they concur with my diagnosis and if they can help.
I have been dealing with them for about two years and always been highly satisfied. (They are in NY, I am in TN. I have sent literally dozens of devices to them)
If none of those 3 options work out for you, start looking for a new phone.
Sorry :-/
Sent from my SGH-I927 using xda app-developers app
Sorry, but I agree with the previous poster, sounds like a hardware issue. Start the warranty process, can't know if it's gonna work til you try it.
Not to try to close the barn door after the horses have bolted, but in case you get into a similar situation with your new phone, there's an easier and safer way. When you're in the WiFi screen hit the menu button and under advanced settings there is the option to keep WiFi on during sleep. Also, as you have found out, be careful with any apps that directly control the hardware.
Had a very similar scenario as the OP described. Went to bed with it plugged in and streaming DI FM in high quality, woke up in the middle of the night by burning myself on the metal back plate. Unplugged it and pulled the battery, when I woke up in the morning after a rather worrisome night sleep I discovered my WIFI would not work unless I was within a foot of the router otherwise it wouldn't get any signal. I assumed the devices internals were damaged and that is what caused the problem, glad to know someone else aside from me has had a similar issue. Best bet would be trying to get a replacement through the warranty unless you have some type of protection plan through your carrier.
I see, thanks guys for the inputs. I had a feeling it's a goner. I can't do the warranty since it's rogers and I'm from the U.S.; bought it off Newegg unlocked without a warranty. So I guess I'm screwed.
Had the same thing happened to me. Had to send it to sammy to get fixed the had to replace the whole board
Sent from my SAMSUNG-SGH-I927 using Tapatalk 2
ericpeacock79 said:
Idk about the phone so much , but i am computer technician and it sounds like you overheated it, what we might call "burned it up".
The screen symptoms you have described are a dead giveaway, especially the lines
If this was a laptop, I would be sending it off for a reflow .
Typically, the circuit board gets so hot, the solder on the ships melts enough for a tiny bit of separation. This requires a "reflow ", where specialized equipment is used to repair the solder connections.
First, you should to a factory reset , then try to do a warranty claim. (unless u have insurance from your cellular provider, then u might check with that)
*edit, sorry, I missed the warranty part the first time I read ur post*
The next option would be to check with the guys at mylaptopisbroke
Email them, ask if they concur with my diagnosis and if they can help.
I have been dealing with them for about two years and always been highly satisfied. (They are in NY, I am in TN. I have sent literally dozens of devices to them)
If none of those 3 options work out for you, start looking for a new phone.
Sorry :-/
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I've contacted mylaptopisbroke and they told me that phone repairs have been discontinued until midwinter 2013.
Is there anywhere I could buy a new soc??
Try mobiletechvideos.com or phonedoctors.com
I've heard of reflowing oneself by putting it in the oven at 550 degrees for 10 minutes or something. FWIW.
Not sure I'd want to do it myself, not having better information, but perhaps there's something out there some googling will reveal.
I've look at the sites, no captivate glide stuff. Guess captivate glide is not that popular a model. I've read about reflowing, but too chicken to try. I did took took the phone apart but saw that the LED is on the board itself and couldn't be detached; it's housed in some soft rubber feely box. I had a feeling it would melt in the oven.
in the options you can change it to keep wifi on all the time.. i keep mine on all day.
bobbinthreadbare said:
in the options you can change it to keep wifi on all the time.. i keep mine on all day.
Click to expand...
Click to collapse
Yeah... I know that now... too late though.. ahah
What have you done with this?
Have you turned it on recently and found it still works?
I have a similar problem and other threads have suggested it's a software problem that might be fixed by installing a new ROM via odin
Too late to return of course, and the seller on Ebay (bought it new) is retired.
I've had the phone about 4 months now, and like the phone a lot, its fine. Except now suddenly the screen is starting to get a reddish/purplish smeary "hue" around all the icons. This comes and goes.
I've found if I slide the keyboard out briskly and snap it back, the screen will usually (but not always) right itself. But I'm sure that's not going to keep working for long.
The suggestion is a loose video cable or wire somewhere inside. I've found the video below which gives the steps of taking the phone apart for a 'screen repair', but its about as long as an open heart surgery procedure and I don't look forward to risking taking the phone apart any more than I need to.
However.... loose wire? Has anybody seen this, and is there any suggestion for a fix? I have much customization on the phone, and my worst fear is the display will suddenly short out leaving me bricked at a complete loss.
Also, there is a second problem which I have suddenly noticed- the phone will not dial. I tap on a contact and it says "Dialing...", but takes forever for it to begin, or never does (forcing it to reboot). I'm not sure if this is related or not but thought I'd mention.
Thanks much for any suggestions!!
Hi, my apologies if my HTC is in the wrong forum, not sure where the Desire would fit, if anywhere.
Nonetheless this is a useful phone to me and worked fine till the day I had to jump in a lake to save my 5 year old boy from drowning. Naturally didn't have the time to remove the phone from my pocket before jumping in the lake. Kid was fine after swallowing some water but phone "swallowed" a lot of water. Let it dry in a bag of rice and baking soda for several days to fully dry. But when trying to turn it on, the screen just flickers non stop. However when connecting it to the computer using a USB cable, I get what appears to be a boot screen (see pic in address below). Phone was rooted and run CyanogenMod 7. Maybe someone that's familiar with the procedure could guide me? Tried a couple of the options shown but to no avail. Old but still decent phone, would like to get it working again. I've transferred the sim to another phone and I've saved the micro SD card. Just need to get the phone to boot again. PS: could the battery be toast? Maybe it got shorted when I first tried to turn the phone on while still wet?
Any help is appreciated.
I'm too new here, won't allow me to post external links. Please go to h-t-t-p://tinyurl.com/p4dmgej (remove dash from http)
I'd say leave it to dry naturally for a week or so and try again. If no joy then you could try a new screen but it's probably something really tiny and sensitive that cannot be replaced..
Glad you saved your boy!.
Sent from a stolen HTC M9
It's been 2 months. But I did make a crucial mistake: I tried to turn the phone on while still at the lake. This likely caused more damage than it needed.
However I suspect the issue is with the battery. It won't charge past 3.85 volts. And the display works just fine, once I press the key combo to enter the boot screen as seen in the pic above. Will try and track one down locally, hopefully a shop will be able to test it a battery in the phone before I buy it.
And yes, the boy was fine. But it was a close call. it is amazing how quickly something can go wrong. I neglected the lake rule of staying within arm's reach. Let this be a lesson to anyone with small ones: it only takes seconds for things to go badly wrong, even at a supposedly safe, man made lake intended for kids.
PS: 2 months prior an adult died on the same lake after falling off his boat. Another lesson: invest in swimming lessons. Scary stuff, indeed.
Right, i thought you were seeing that over usb via sdk or something.. You could always try opening it and inspecting for blown components. What damage can be done.. It's already useless.
I still think it's worth leaving it to dry naturally.
Sent from a stolen HTC M9
The battery on my HTC 10 was completely shot and needed to be replaced. I'm a careful person by nature and this being my first phone repair, I bought an extra screen just in case something happened getting it apart. Followed a guide by jerryrigeverything on how to take apart the phone, got the battery replaced, everything seemed to go smoothly. When I went to test the display before screwing everything together, the new screen I installed lit up, but the right half of the display only showed as a repeating segment from the middle of the screen. Thinking the connector was loose, I disconnected and reconnected the display and made sure everything was tight: same problem. I reinstalled the original display, which I made sure had worked after cutting through the adhesive before I disconnected it, and now the old display is also showing the same issue.
The touch screen on the broken side of the display still works, I'm able to type PIN numbers and whatnot even though I can't see them properly. Only thing I can think of is maybe the connection actually got some debris or something inside of it? I don't think I damaged anything, as I was super careful, but it was also my first time opening up a phone.
Sorry for the inefficiently worded post. Any help would be really appreciated.
Did you resolve this?
I have exactly the same issue you describe after my screen replacement (with two new screens) Believing the first was a dud.
I have done many screens/batteries on my m7, m8's previously never having a problem.
I'm currently back to running my M8 and miss my 10!
Anyone reading this and has any suggestions they are all welcome!!
Thank you in advance
Exactly the same issue this guy has
https://youtu.be/RpdCuMiTOn8
I'm now wondering if it is just bad aftermarket screens?
Has anyone else replaced their screen successfully, if so where did you get the screen?
Thanks Rory
I have been having the same problem. I just tested screen number 4 that has the same exact problem. Is there a specific brand that is known to test well?
I dropped my 10 in water at work...believe it was a salty water at that. It stopped working completely. I opened the phone to check the internal components for damage and I broke the LCD doing so. I replaced the battery and the screen at almost the same time. I think it may have been a week or two apart.
The battery is still working. The screen worked initially but the phone kept getting really hot and the heat kills the phone. I tried keeping it cool at all times which kept it operational. It hasn't been activated since I quickly replaced the phone with another of my lines upgrades. I went back to the phone to check it out and try using it as a replacement for my daughter but the screen no longer works.
The battery charges just fine...the led light indicates that well. I've tried reinstalling it several times with no success getting the screen working again. I tried the original screen to check and I could see light and it was responding but its not usable so I'm stuck with a phone that has a new non-working display. I think the brand was called DIYRepair or similar.
If anyone has encountered this and has advice...I'd be happy to try anything.