The battery on my HTC 10 was completely shot and needed to be replaced. I'm a careful person by nature and this being my first phone repair, I bought an extra screen just in case something happened getting it apart. Followed a guide by jerryrigeverything on how to take apart the phone, got the battery replaced, everything seemed to go smoothly. When I went to test the display before screwing everything together, the new screen I installed lit up, but the right half of the display only showed as a repeating segment from the middle of the screen. Thinking the connector was loose, I disconnected and reconnected the display and made sure everything was tight: same problem. I reinstalled the original display, which I made sure had worked after cutting through the adhesive before I disconnected it, and now the old display is also showing the same issue.
The touch screen on the broken side of the display still works, I'm able to type PIN numbers and whatnot even though I can't see them properly. Only thing I can think of is maybe the connection actually got some debris or something inside of it? I don't think I damaged anything, as I was super careful, but it was also my first time opening up a phone.
Sorry for the inefficiently worded post. Any help would be really appreciated.
Did you resolve this?
I have exactly the same issue you describe after my screen replacement (with two new screens) Believing the first was a dud.
I have done many screens/batteries on my m7, m8's previously never having a problem.
I'm currently back to running my M8 and miss my 10!
Anyone reading this and has any suggestions they are all welcome!!
Thank you in advance
Exactly the same issue this guy has
https://youtu.be/RpdCuMiTOn8
I'm now wondering if it is just bad aftermarket screens?
Has anyone else replaced their screen successfully, if so where did you get the screen?
Thanks Rory
I have been having the same problem. I just tested screen number 4 that has the same exact problem. Is there a specific brand that is known to test well?
I dropped my 10 in water at work...believe it was a salty water at that. It stopped working completely. I opened the phone to check the internal components for damage and I broke the LCD doing so. I replaced the battery and the screen at almost the same time. I think it may have been a week or two apart.
The battery is still working. The screen worked initially but the phone kept getting really hot and the heat kills the phone. I tried keeping it cool at all times which kept it operational. It hasn't been activated since I quickly replaced the phone with another of my lines upgrades. I went back to the phone to check it out and try using it as a replacement for my daughter but the screen no longer works.
The battery charges just fine...the led light indicates that well. I've tried reinstalling it several times with no success getting the screen working again. I tried the original screen to check and I could see light and it was responding but its not usable so I'm stuck with a phone that has a new non-working display. I think the brand was called DIYRepair or similar.
If anyone has encountered this and has advice...I'd be happy to try anything.
Related
Hi all, just want to describe some problems I've been having over the last week or so.
Basically, my Orbit suddenly developed the habit of randomly freezing and displaying wierd patterns on the screen and requiring a soft reset and also just randomly restarting.
I first noticed this about a week ago, the phone did fall out onto the driveway a few days ago but it wasn't nothing it hasn't been through before and the screen is FINE, no dead pixels nothing. This is the ROM I had on it when it first started happening: http://forum.xda-developers.com/showthread.php?t=912989
My initial thought that it was something do with something installed on it, perhaps a software issue so I did a hard reset but same problems. I changed the ROM a few times but same problems. It's getting to the point where I have to look to buy a new phone.
It's quite difficult to describe what happens when the device freezes. I will try and get a picture or video but it's at random . The best way I can describe it is that it the device freezes, a section of the screen goes black slowly before the remaining section fades to black completely sometimes showing white lines. Moreoever, when I say the screen goes black, I don't mean that it goes off, the screen remains on but black.
Perhaps it is a hardware issue with a loose/faulty connection somewhere? My first thought was that it could be down to the screen connection but when the phone is working, the screen is absolutely normal.
Any suggestions are welcome. Please bear in mind that I've got no trouble in opening the device if needs be (had to change the LCD screen myself, I know, I know, go me! ). Thanks in advance!
Just noticed something. I've had it lying around re-filling up the inbox from a backup but as soon as I attached the charger, the problem occured, so could it be down to something from that as a result?
I've just managed to take a few pics. Theres quite a bit of glare unfortunately however this type of pattern doesn't always occur, sometimes it's less noticable than that.
http://imageshack.us/photo/my-images/69/pict0189n.jpg/
http://imageshack.us/photo/my-images/232/pict0190z.jpg/
hi dude,
my first thought was battery but now thinking you might have a loose connection with the motherboard and lcd.
i would check lcd ribbon that connects to motherboard first, obviously you know exacly what i meen, if that is not the problem i would buy a new battery (charge while off, do not turn on untill fully charged new battery)
if both of these do not do the trick then i would consider buying a new device. (unless anyone else has any ideas??)
thanks
Rn
Last night I was out and during the night I pulled my desire z out of my pocket to find that the screen was dead, the soft touch buttons were still lit up and working but no display. I pulled the battery and tried to reboot and no luck, you can hear it booting and even unlock/receive calls and txts etc once it has booted up just the screen stays blank the whole time so have to do everything on feel.
Essentially does this just mean my screen has a hardware fault? is it worth trying to fix? I assume the only option would be to purchase a replacement screen and dissemble and reassemble it?
(warranty is not worth it as I live in New Zealand and would have to send my phone back to the UK where I bought it from, also I have dropped it quite a few times so probably voided anyway...)
Thanks in advance for any input
Does it never display anything? So not even a flash during boot or something?
Because then it is probably a hardware problem.
Since the soft touch buttons do still work I think there might be a little crack or something in the flat cable that connects the bottom half with the top.
Maybe you could check whether you can see if the cable is broken or not?
The best thing to do then is to look for a replacement and try to fix it yourself or bring it to a shop where they can do it for you.
No it never displays anything, completely dead the whole time. The touch input is still working though as I answered a phone call this morning on it by making the usual gesture just without being able to see anything. Doesnt seem to be anything wrong with the cable itself as far as I can see. Yea might have to get someone to have a look at it.
My phone is acting the same. I dropped my phone in the pond before, but pulled battery out on time and had it in rice for a day. My phone was still working for about two weeks after that incident. I dropped it and had one little crack at the top of the screen and about a week after that it died when I had a water balloon fight with the phone in my pocket. D;
Do any of you know if the replacement lcd screen/digitizer for the Desire Z would work for the G2?
I had the same thing happening to my G2 screen, only it was intermittently working for a little while, then just completely died and wouldn't work. It was doing this crazy flickering thing then the back light wouldn't go on at all. If I held the phone at a certain angle in the sun, I could see that the pixels were indeed working on the display, but there was no backlight to make them normally visible.
So I purchased a replacement screen from ebay and carefully followed the directions on a youtube video for a G2 take apart. Its not a hard task to take apart and get down to the screen itself. It was rather easy. After putting it back together the screen still didn't work! Sounds work, i can also receive calls etc. But the screen still doesn't work!
Is there any way that this could be a software issue?
Oh and PS, I believe the LCD replacement would work for both the desire Z and the G2. They are identical phones after all right? I'd say its a safe bet. The screen I bought was only 35 bucks. Didn't think that was a bad deal.
Another dead screen or something else?
Few days ago my phone fell of the couch onto a rug - no big deal, so far it has survived much worse, but when I picked it up, the colors were all messed up - overly green and red. Tried restarting - no luck. Everything worked fine, except the colors, but then the screen turned of completely. I could hear notifications, phonecalls, but the screen was dead. After some tapping on the screen, it turned on again - with ****ed up colors. Then started flickering and was gone again. Few more times I could turn it on by tapping before it was dead for good.
Figured, after all these drops it survived, maybe the screen connector is a bit loose. I mean, I could sometime get a contact when tapping it, so I dissasambled it completely, secured all the connection, put it all back tougether and fired up - same thing: dead screen, phone working.
Has anyone had such problem before? Is it screen that is dead, or connector or... I have no clue... I would like try to fix it on my own, with some replacement parts I could get on ebay - but, what gave?
Hello everyone,
Basically went to unlock my phone today and touch screen is not responding, however the hardware buttons work fine. Now i've done some research and found other posts of people with the same problem, however their touchscreen problems seem to be fixed(temporarily, at least) with a battery pull.. mine however is still unresponsive after half a day and multiple battery pulls.
Id rather not have to send in for certified to replace an otherwise perfectly working phone.
Any ideas/suggestions would be greatly appreciated!
bigdeezer20 said:
Hello everyone,
Basically went to unlock my phone today and touch screen is not responding, however the hardware buttons work fine. Now i've done some research and found other posts of people with the same problem, however their touchscreen problems seem to be fixed(temporarily, at least) with a battery pull.. mine however is still unresponsive after half a day and multiple battery pulls.
Id rather not have to send in for certified to replace an otherwise perfectly working phone.
Any ideas/suggestions would be greatly appreciated!
Click to expand...
Click to collapse
are u undervolting?
Nope, sorry forgot to say. Completely stock never unlocked or rooted.
Also i tried getting into recovery to try and do a factory reset but when i select recovery i just get the android on his back with the red triangle..
so instead i just went through the steps and unlocked the bootloader and booted up (in order to give me the factory reset without having to touch the screen)
It unlocked and booted up fine but still no response..
No new recent app installed and never had this happen before.
Mine did this after a few days of owning it, and luckily the store took it back and swapped it out with a perfectly working unit. Is yours within a few weeks of purchase?
Figured this out randomly. Remove battery cover. With phone turned on, press on the area to the to the left of the camera lens until the screen is responsive. My screen becomes unresponsive when the phone is dropped and this fixes it.
dailong said:
Figured this out randomly. Remove battery cover. With phone turned on, press on the area to the to the left of the camera lens until the screen is responsive. My screen becomes unresponsive when the phone is dropped and this fixes it.
Click to expand...
Click to collapse
hrmm this does not seem to fix either. I also have never dropped my phone, although this seems to be worrisome if the issue is hardware related.
@ tmellen i purchased the phone from amazon and am a few days past my return date :-/
Guess ill just give them a call and hope for the best. Thanks for the ideas everyone.
(update) called amazon and they are sending me a brand new phone.
Knowing this i thought i'd try dailong's method again only this time i was quite a bit more "rough" with pressing down on that area, and it actually worked!
Ill still be taking the new phone once it gets here but for anyone who is having this problem there's a sweet spot on the left edge of the phone towards the top (looking at it with the back cover off) there should be a circle shape. press on that area really hard and it should fix.. weird
Experienced the same on my GSM version a few minutes ago. I had to call my mobile to get it to respond. After that it worked again as normal. I'll see if I get this issue again in the next few days. Hope it's just random
Had the same happen earlier to mine and I was on AOKP. I've had this happen to other phone before, shouldn't be a a cause for alarm unless it happens very frequently. Btw, next time it happens to me I'll give that left side of the camera trick a try.
mine got fixed by removing battery.
Hi everyone,
I've had my Desire Z for little over 2 years now and two months ago (was running CM7.2 at the time) I started getting a weird issue where my touchscreen would only be responsive when the keyboard was slid out (so the opposite problem of what quite a few other people have reported where the touchscreen becomes unresponsive when the keyboard is out). The status LED would also stay off whenever the keyboard was closed, and the keyboard backlight didn't come on anymore at all. Also, I had to make sure that the keyboard was slid out during boot, if the phone booted without the keyboard out the screen would not become responsive at all until after another reboot. My earpiece speaker stopped working around the same time so I was wondering whether it was just an issue with the flex cable becoming a bit loose, but the touchscreen would consistently start working again when I flipped the keyboard out, and also the physical scroll button on the top bit would always work, so I was still hoping it would be some weird software issue.
I then upgraded to Flinny's (amazing) Andromadus ROM (build 22, complete data+dalvik wipe) after which the keyboard backlight started working again, but the rest remained pretty much the same. Since then the touchscreen issues have been getting worse, so that I sometimes have to flip the keyboard in and out again a few times, or turn the screen on or off with the power button several times before it becomes responsive again, but then it tends to work fine until I lock the screen again, with no noticeable dead spots anywhere on the screen. I've had days where it worked all day without problems (except having to flip out the keyboard, that's been a constant for the past two months), and then today I haven't been able to get the screen to do anything at all even after dozens of reboots.
I've already bought a new digitizer and am all ready to put it in (I'll have to replace the broken earpiece anyway), but was wondering whether anyone has any thoughts on whether it could still be a software issue after all, or if anyone has experienced anything similar? The thing with having to flip the keyboard out to get not only the touchscreen but also the status LED to work is just so weird and makes me doubt that it's a pure broken digitizer or lose flex cable issue, so I'm wondering whether it would be better to first try reverting to a stock ROM before taking on the messy sticky glue stuff (I should be fine but still, never done it before)?
Many thanks!
From what you describe my best guess would be the main flex cable is what needs to be replaced. Flash a touch based recovery and see if you have the issue there as well, if so its very unlikely that its anything but a hardware fault
Sent from my Nexus 4 using Tapatalk 2
Thanks for the heads-up, I've been playing around a bit more with software and I do manage to get the screen working again occasionally, typically after the second boot into a newly flashed ROM or restoring a backup, and only until one or two reboots later when it becomes completely unresponsive again. I've tried CM 7.2.0 as well as Flinny's Andromadus 10, and it is only complete flashing that does the trick, cache wipe or factory reset alone does nothing. The two occasions where the touchscreen worked were still limited to when the keyboard was flipped out, and it also had to be flipped out during boot, otherwise nothing would work. I've learned to navigate my way around the phone by just using the hardware navigation button, but I'll have a close look at the flex cable when I take it apart to replace the earpiece speaker tonight...
Hello,
so I took my dear phone apart yesterday to replace the broken earpiece - everything went fine but after reassembly the replacement earpiece isn't working either, which leads me to think that all those little broken bits might actually be related to some contacts being a bit lose, all in the same region. Should've thought about that earlier really since the earpiece and the LED (only works when keyboard flipped out) are both in that top region that the digitiser data presumable also has to run through before passing through the flex cable.
In any case, I also took a picture of the flex cable which is slightly bent but doesn't seem straightforwardly damaged (see attachment, that thing on the right is *not* a rip). Think it's worth trying to replace it anyway?
What was truly bizarre is that after the first boot following reassembly the touchscreen worked quite consistently for the entire evening - I thought I might've fixed a lose contact by un- and replugging the digitiser cable, but then the screen went nonreactive again at some point. I wonder if the working screen was again actually related to some software reset caused by the battery being taken out for so long? In the meantime the actual screen and trackball are still working away perfectly. Bizarre.
Just to let people know the solution to the mystery: the increasingly odd behaviour was actually caused by an initially small rip in the flex ribbon cable that got bigger and bigger - it's actually half-visible in the picture I uploaded above, only that the rip is where the cable comes out from underneath the case, and not where it's wrinkled!
Just in case it could be useful for anyone, here's the (top half of phone) components in the order in which they failed on me, which I guess corresponds to the order of the respective data lines in the ribbon cable (from the top of the phone towards the center):
environment brightness sensor (I thought that the sensor had been broken for almost a year, but as soon as I rebooted with the new flex cable I noticed how my phone stopped shining into my face at full brightness - if your brightness sensor gets stuck reporting the same (low) value this means your flex cable is on its way out!)
earpiece speaker
status led
touchscreen
screen (non-alignment with edge of screen, visual artefacts)
screen (fade to black/power interrupt)
obstacle3 said:
Just to let people know the solution to the mystery: the increasingly odd behaviour was actually caused by an initially small rip in the flex ribbon cable that got bigger and bigger - it's actually half-visible in the picture I uploaded above, only that the rip is where the cable comes out from underneath the case, and not where it's wrinkled!
Just in case it could be useful for anyone, here's the (top half of phone) components in the order in which they failed on me, which I guess corresponds to the order of the respective data lines in the ribbon cable (from the top of the phone towards the center):
environment brightness sensor (I thought that the sensor had been broken for almost a year, but as soon as I rebooted with the new flex cable I noticed how my phone stopped shining into my face at full brightness - if your brightness sensor gets stuck reporting the same (low) value this means your flex cable is on its way out!)
earpiece speaker
status led
touchscreen
screen (non-alignment with edge of screen, visual artefacts)
screen (fade to black/power interrupt)
Click to expand...
Click to collapse
I'll for sure keep that in mind. Mine is still going strong for the time being, but it's good to know some warning signs if I need to replace parts or if it's time to get a new phone
fireball0093 said:
I'll for sure keep that in mind. Mine is still going strong for the time being, but it's good to know some warning signs if I need to replace parts or if it's time to get a new phone
Click to expand...
Click to collapse
Replacement parts all the way, the repair was 15$ and it feels as good as new! Well, it could do with a new battery but that's just another 5..
Just realised that the proximity sensor should actually be added to the very top of the list - just noticed that faint red light when taking a phone call, don't remember seeing that in almost a year :]
obstacle3 said:
Replacement parts all the way, the repair was 15$ and it feels as good as new! Well, it could do with a new battery but that's just another 5..
Just realised that the proximity sensor should actually be added to the very top of the list - just noticed that faint red light when taking a phone call, don't remember seeing that in almost a year :]
Click to expand...
Click to collapse
That's not a bad cost at all. I know I'm going to have to replace my keyboard in probably 2 months or so (maybe sooner) because some buttons are starting to not work. Other than that fact my phone is currently still going strong for being going on a 3 and a half year old phone
So, initially I began having problems with "ghost touching", then, portions of my screen became unresponsive to touch in addition to the "ghost touching". I did the line drawing test multiple times. At times, it showed a dead space to the right (vertically only, horizontal was ok), other times, it was working fine. I was so focused on checking the right side of the screen, I didn't check the bottom. When I did, it showed an unresponsive area at the bottom as well. Almost as if the screen was off kilter. I did a factory reset through the normal phone menu and from TWRP and the ghost touching has seemed to resolve itself, however, the unresponsive screen is getting worse. Now a full 1/3 of the screen on the right is intermittently unresponsive.
I am hoping there is something I can flash on this phone that might assist the digitizer if it is software related. If not, could it be that the cable is not grounded properly or has possibly become partly unplugged? I know what a pain this phone is to take apart because I had to take my first M8 apart when I accidentally gave it a ride home in a cup of tea. (really tired after working one night, forgot the cup was in the cup holder). Turns out they really don't like that. My current M8 I bought from a private seller, so I have no warranty, no insurance and extremely limited funds at the moment for handling this problem. I've had this replacement phone for several months, so I know the phone wasn't defective when I got it.
I am rooted, running stock ROM, stock kernel and TWRP Recovery v2.7.0.2
Thank you in advance for any help.