Develop Bugs

Reboot option in stock 2.2

Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?

chillout23 said:
Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?
Click to expand...
Click to collapse
opet ti
since u have a sense ROM , check this link

Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate

chillout23 said:
Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate
Click to expand...
Click to collapse
how to install:
* please make sure your device/setup meets the requirements above
* check your framework build number (settings >> about phone >> software information >> build number)
* download the archive that matches your build number
* copy it to your sdcard and flash it in recovery mode (as always, it is advisable to do a nandroid backup prior flashing)
check your framework build number, download the .zip that matches ur build number, copy the file to microsd, enter recovery (turn off device then press power + vol down and keep holding till u get the white screen) , use vol up/down to navigate to then press power button to enter Recovery , in recovery u navigate using the trackball, there u chose flash .zip file from sd card, u chose the file u want (the one u downloaded and copied to the card) and that's it

Ok...i'll try it when i'll be back from my job...
thanks again and again...and again

So...I found app on Applanet HOT REBOOT App works like a charm

Symphony W50 New Rom Tutorial !

Hello Everyone !
NOTE : i am not responsible for Dead SD cards , bricked Phones
As Some of you know The Symphony W50 and the Micromax A75 is the but is also has some differences ...
This for all the user of Symphony W50 in Bangladesh .....
Fully Screenshoted
Well ... Symphony W50 and MMX A75 is not the same but almost the same !
So in order to Enjoy a Custom rom that was made for A75 you have to Flash all the A75 files .
The driver for Symphony W50 -
The Driver installation !
a) Now download the drivers from this link https://sites.google.com/site/ultimatebrainguide/micromax-a75/installing-drivers ( If you have 32bit download the 32bit ver. and if u have the x64bit download the x64-bit ver )
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
2nd Step : Making your phone what is supposed to be !
1.Download this first ! http://www.mediafire.com/?2bd9c888k21ll3g
2.Then Download this http://www.sendspace.com/file/19ma4k
3.Extract both of the files
4.Go to the SP_Flash_Tool folder and and Open Flash_Tool as Administrator .....
5.Click on the Scatter-Loading And select the file MT6573_Android_scatter from the other file you downloaded As A75_0201_V3006
6.Now untick Preloader
87Again go back to SP_FLASH_TOOL window and Click on the recovery and select the CWM.img file you just downloaded !
8.Now Make sure your phone is turned off and also the cable is disconnected ! ......
9.Now press Download on the SP_FLASH_TOOL and as soon as the Timer starts Connect your phone ........
10. Now this will take a While ! And Your phone will boot up with the Stock ROM !
3rd Step : Are we there yet ?
1.Now download this http://www.mediafire.com/?9yqj5si81kzapeg and Copy it to the Root of your SD card ( No need of Extracting )
Now Power Off the phone and Start it By Pressing Volume UP and Power Button !
Now a Screen like this will come .......
Now Do As Showed Below !
First Do wipe data/factory reset
The Select Yes ....
After That do a wipe cache partition
Again Select Yes
Now Navigate to Install Zip from SD card
Now ... Choose Zip from SD card
And Now Browse for the ROM (ZIP File) You copied to your SD and Select it !
Again Select Yes .....
And Wait for the Installation to be finished !
After Installation Finishes Go back and Reboot the Phone !
Wait it's not finished Yet .... Still There's a Lot !
Nah ...... Just Kidding ... You are all done !
Note : First time it will take much more time to boot up so be patient Please !
Incase if you need the backup ! http://www.mediafire.com/?08313k3b3cbm8pb
Now this Rom is Named SilverLight_4
There are Ton of other roms for MMX A75 feel free to try those too ......
Hit the Thanks Button if This Helped You !

need help !!!!
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it

Sajib6t9 said:
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it
Click to expand...
Click to collapse
Change the boot.img to original in the custom rom, then try it

[CWM-Touch] Bootmenu for Defyxt-535

Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk

test it and reply the queries

Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,

srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm

Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...

Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not

Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7

Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS

some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?

k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once

Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?

Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?

ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?

Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there

I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up

Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.

ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation

i like your rom
i like your rom and i'm waiting for your next rom~

Wipe userdata on Spreadtrum Phone

You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817

Re:
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if does'nt exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Pyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
Thanks for your effort Mr. Kaung Myat Lin. So proud to be you and your country Myanmar. Thanks

oh there's one question.... how could I get compatible fdl1.bin & fdl2.bin...
fdl files download here- http://forum.xda-developers.com/showthread.php?t=2165554 make a choice fdl1 & fdl2. check your device model include or not.If doesn't exit u can use other fdl

kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if does'nt exit recovery for your device.
Click to expand...
Click to collapse
What's a nice work , man. Great . Keep it up . :good::good:

thank you
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if does'nt exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Pyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
thank you my friend

Great Bro ! ! !
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
Great Bro ! ! ! :fingers-crossed: :victory:

Nice................... Thank you for your post.

Thanks you , very useful

Thanks a lot
Thanks for Myanmar xda developer kyawkyar and kaungmyatlin
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse

error
i keep getting file size error

kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
Thank You...So mouch

HElP
how can i find compatible fdl1.bin and fdl2.bin for android.

where
where i found this tools researchdownload R2.9.700 please help me

i have a problem please help me
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
my problem is my android is stuck in android logo the homescreen never shows up. can your post will help with my problem? :| if not is there other way?

hi
I have a 808 Spreadtrum SC6820 with too many unlock pattern attemps.
http://www.chinabuye.com/808-spreadtrum-sc6820-cortex-a5-1-0ghz-android-2-3-dual-sim-gsm-wifi-bluetooth-3-5-inch-smart-phone-white
and i want to make a factory reset, the only thing it´s that if i press vol - and power it only shows a menu:
Code:
Spreadtrum Factory Test
phone test
factory used
full phoe test
view phone test result
item test
BT EUT
ctp calibrate
exit
and i follow this tutorial but cant get Research Download to recognize this phone.
Do you have any idea? i´ve tryied other buttons combinations but nothing happens.

Nice solution Mr.kaungmyatlin
Thank you

those files will kill ur phone. must be a specific userdata and fdl for each phone type.

i already killed my phone using this tool!!! right now just show up vibrate n black screen (i think it's BRICK )
how to resurrecting my phone to be alive again????
please help me....
---------- Post added at 09:59 PM ---------- Previous post was at 09:17 PM ----------
this info from my phone :
MOBILE PHONE
Model:9260
FCC ID:A3LGT9260
SSN:9260GSMH
Made In CHINA
8810 6820 TOSHIBA H8BCS0UN0MCR
but i don't know it's 6680 or 8810 CPU.
help...help...!!! :crying:

Spread
Hie, thanks for the tutorial it was nice and i followed all the instructions as you mentioned but the problem is.....
1. I have one reseted two phones so far but the phones only work on the first boot when i turn off the device it wont boot again it will just restart when it vibrated to go into home screen please help!!!!

100% Tested By Me
kaungmyatlin said:
You can use this method for forgot your pattern,password and stuck on android logo.Try with custom recovery first.Use my method if doesn't exit recovery for your device.
Are you sure! because your data will be lost.
Start.
Need to install Spreadtrum driver.
Download driver,DEBUG_TOOL,FDL files here http://forum.xda-developers.com/showthread.php?t=2165554
Open DEBUG_TOOL\ResearchDownload\Bin\Research download.exe > choose pac on Load Packet
click Start downloading(Play icon)
Power off your device.Press and hold download button(vol down or vol up) then connect to pc.
Research download.exe will be download wipeuserdata to device when detected.
U can unplug while " Passed " message on display.
Now remove and reinstall battery then power on your device.
Goodluck.:good:
BTW! U need to change compatable fdl1.bin & fdl2.bin in download setting if any error on your device.
Sorry for my English.
Thanks My Sir Phyo Nyinyi & ElectronikHeart http://forum.xda-developers.com/member.php?u=5017817
Click to expand...
Click to collapse
Thanks it works form me and my pattern lock gone. Thanks a lot.

Official Jui Nougat stable beta - Cool1 dual

Rom download: https://cloud.mail.ru/public/5mxC/FNwvnWc4g
Password for unraring: coolpadJUI2017
Extract it in some folder.
Download only Patch, drivers and twrp install from here : https://drive.google.com/drive/folders/0B5vyMGZJJmcnbVUtT3A2UVFtS2M
Than install coolpad assistant from the very first one it has a lot of chines words and its and .exe fail u cant miss, and coolpad setup from the driver folder. After that go to "C: \ Program Files (x86) \ yulong" and install everything that is installable. After that start phone in fastboot mode which is when turn off phone and connect it to pc with usb cable while holding volume and volume down, after that red LED will blink. Or u can go to fastboot trough twrp recovery and find option bootloader confirm it with volume up and there u are. Start coolpad assistant that u installed, browse init.cpb and click check after that and installation will start, w8 it to finish. After that u need to install twrp which u download, start phone again in fastboot, but now using volume up and volume down option cos u dont have twrp anymore( its because JUI needs another one). start MIflash and browse folder TWRP, click refresh and tap on ur phone, its the only option u cant miss click flash. After it is done go to twrp standardly by pressing power button and volume up. Set english language. Go to install folder and Zip file from patch folder. Of course before that u need to transfer it to ur phone.. This patch is important. If u dont install it, it wont boot second time when u reboot phone.
After that download gapps from here : http://opengapps.org/ arm64, 7.1 and aroma check. Go to twrp install and select gapps click flash, Click "Next" - "Customized installation". Uncheck "Load choices". Select "Include" and tick application u want. After clicking finish Click the Home button, go to "wipe" - "advanced wipe", highlight "Dalvik / ART Cache", "Cache", "Data" and wipe. Click "Restart in OS".
After that go to twrp again, and install this chine bloat remover that u firstly transfered to ur phone (this step is not nescessery but I advise u to do it), to delete unnescessery apps. Unrar ROOT file and transfer superuser and apk file to ur phone. Go to twrp again and install superuser. click go to system and install that apk that u transerfed. ROOT STEP IS ONLY FOR THOSE WHO WANT TO ROOT THEIR PHONE. IF U DONT U DONT NEED THIS. I hope that i helpped someone.
Here is my short reviewe. Defenetly uprade eui to this, better interface, less bugs, less heating issues, still some messages dont come, but its around same as eui, even s7 in a very low rate of times have that issue. Battery optimization is much better too.Who didnt upgrade it, do it as soon as possible, cos of lower heating issues which later do damage to your phone and battery of course.
If anyone need help i am here

Can i falsh on c103 what are bugs??

Could we install magisk? I've tried once and it failed.

reddsmokee said:
Could we install magisk? I've tried once and it failed.
Click to expand...
Click to collapse
Same was for me.. I have this one and everything work the same..

pulkitgohil said:
Can i falsh on c103 what are bugs??
Click to expand...
Click to collapse
Fast charging now works, and about buggs, pretty same as on eui, sometimes messeges doesnt come.. and smart look is at this moment unavailble.. Bugs will be fixed in upcoming updates as u have ota update.. Officialy u can but people say that speaker doesnt work, so i wouldnt suggest to install it, w8 for fixed version.

Speaker working or not ?

when it release ? it from Leeco or Coolpad ??? i read somewhaere about Leeeco die, not support software for their product. And how about Coolpad??

roxcky said:
Speaker working or not ?
Click to expand...
Click to collapse
On c106 perfectly.

md07 said:
when it release ? it from Leeco or Coolpad ??? i read somewhaere about Leeeco die, not support software for their product. And how about Coolpad??
Click to expand...
Click to collapse
thi is coolpads product.. 1 month passed since release.

In c103 speaker works ??????

GPS issue
Just updated my Cool 1 c106 and tried to root but failed (QFIL, MI phone... Connected in fastboot mode, recognized as Qualcomm port) programs can't see the phone (before it worked) also a very important issue for me that can't turn on high accuracy GPS. Anyone facing the same issue or any ideas how to solve? :/
Thanks in advance!

I have bricked my phone using this method. It's not starting ,a red light is blinking when connected to the pc. How can I flash stable rom back on it? I have tried using YGDP but the phone is not connecting to the pc . A message is flashed ' usb device not recognised' whenever I connect. Pls guide and give the link of drivers to connect to the pc.

U couldnt brick it if u did all steps i said.. Try to install drivers from programfiles x86/ yulog and install everything fr there.. Pc should then recognize ur phone.. and then try to flash init.cpb with coolpad assistant
.
---------- Post added at 07:53 PM ---------- Previous post was at 07:49 PM ----------
djpingvin said:
Just updated my Cool 1 c106 and tried to root but failed (QFIL, MI phone... Connected in fastboot mode, recognized as Qualcomm port) programs can't see the phone (before it worked) also a very important issue for me that can't turn on high accuracy GPS. Anyone facing the same issue or any ideas how to solve? :/
Thanks in advance!
Click to expand...
Click to collapse
I dont have that issue. Try to install coolpad driver and to install everyting from the folder yulog which is located in Program files(x86). Then your pc shold recognize it. Also install adb, and qualcom driver. Then root it with superuser, not magisk.

GCam with HDR+
Does anyone have the ported GCam with HDR+ working? With a Sony camera sensor and SD652, it should be compatible with the phone under Nougat, and if it does work I would probably try running this ROM.

Use of attachment files???
What use of attachment files??

Does this work on C103?
Can anyone confirm if this works or not with c103?

skraw07 said:
What use of attachment files??
Click to expand...
Click to collapse
First remove chines apps, and second is to root ur phone if u want.

Hi HARSH9080!
Coul you find any solution ? After I successfully flashed TWRP almost the same...
My Cool1 (C106) is bricked. I only can enter to download mode (pushing volume + and - and power ON phone recognized as 'Qualcomm QDLoader 9008') after I installed JUI 7.1 tried to install TWRP recowery as well but now the phone is rebooting after boot logo and can't enter to recovery (stuck on recovery picture). Could anyone please suggest a method (with correct files) to be able to flas first correct recovery then a stock firmware? (YGDP cant see the phone it stucks on 'Entering download mode' only QFIL seems to work). Thank you very much in advance !

gapps stock
can i use arm64 7.1 stock gapps??

Can I flash this stock to Coolpad Cool Play 6 ? It's almost the same with Coolpad Cool 1...