Symphony W50 New Rom Tutorial ! - Upgrading, Modifying and Unlocking

Hello Everyone !
NOTE : i am not responsible for Dead SD cards , bricked Phones
As Some of you know The Symphony W50 and the Micromax A75 is the but is also has some differences ...
This for all the user of Symphony W50 in Bangladesh .....
Fully Screenshoted
Well ... Symphony W50 and MMX A75 is not the same but almost the same !
So in order to Enjoy a Custom rom that was made for A75 you have to Flash all the A75 files .
The driver for Symphony W50 -
The Driver installation !
a) Now download the drivers from this link https://sites.google.com/site/ultimatebrainguide/micromax-a75/installing-drivers ( If you have 32bit download the 32bit ver. and if u have the x64bit download the x64-bit ver )
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
2nd Step : Making your phone what is supposed to be !
1.Download this first ! http://www.mediafire.com/?2bd9c888k21ll3g
2.Then Download this http://www.sendspace.com/file/19ma4k
3.Extract both of the files
4.Go to the SP_Flash_Tool folder and and Open Flash_Tool as Administrator .....
5.Click on the Scatter-Loading And select the file MT6573_Android_scatter from the other file you downloaded As A75_0201_V3006
6.Now untick Preloader
87Again go back to SP_FLASH_TOOL window and Click on the recovery and select the CWM.img file you just downloaded !
8.Now Make sure your phone is turned off and also the cable is disconnected ! ......
9.Now press Download on the SP_FLASH_TOOL and as soon as the Timer starts Connect your phone ........
10. Now this will take a While ! And Your phone will boot up with the Stock ROM !
3rd Step : Are we there yet ?
1.Now download this http://www.mediafire.com/?9yqj5si81kzapeg and Copy it to the Root of your SD card ( No need of Extracting )
Now Power Off the phone and Start it By Pressing Volume UP and Power Button !
Now a Screen like this will come .......
Now Do As Showed Below !
First Do wipe data/factory reset
The Select Yes ....
After That do a wipe cache partition
Again Select Yes
Now Navigate to Install Zip from SD card
Now ... Choose Zip from SD card
And Now Browse for the ROM (ZIP File) You copied to your SD and Select it !
Again Select Yes .....
And Wait for the Installation to be finished !
After Installation Finishes Go back and Reboot the Phone !
Wait it's not finished Yet .... Still There's a Lot !
Nah ...... Just Kidding ... You are all done !
Note : First time it will take much more time to boot up so be patient Please !
Incase if you need the backup ! http://www.mediafire.com/?08313k3b3cbm8pb
Now this Rom is Named SilverLight_4
There are Ton of other roms for MMX A75 feel free to try those too ......
Hit the Thanks Button if This Helped You !

need help !!!!
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it

Sajib6t9 said:
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it
Click to expand...
Click to collapse
Change the boot.img to original in the custom rom, then try it

Related

(Solved) Rooting Symphony W50/Micromax A75

Hi Guys !
I'm here with a tutorial for Rooting Symphony W50/Micromax A75 !
Which many of you Guys Requested !
OK ! First things First !
I'm Not Responsible For any damage of your phone !
Lets Start -
1.Backup UR data and ROM !
- If you wanna keep all the app you currently have in your phone because all your Contacts , Massages , Apps will be removed during the process
If you wanna make a backup of those APP thn you might try some APPS to make a Backup of those files here are the name -
a) File Expert
b) Android Assistant
2.Rooting Process -
a) Now download the drivers from this link https://sites.google.com/site/ultimatebrainguide/micromax-a75/installing-drivers ( If you have 32bit download the 32bit ver. and if u have the x64bit download the x64-bit ver )
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
e) Now Download this Zip file https://www.dropbox.com/s/3hqk9uymdnlrr53/[Megafileupload]SP_Flash_Tool_exe_v2.1121.01.7z
f) After Downloading Extract it to your Desktop !
g) Now go to Sp_Flash tool folder and run Flash_tool as administrator
h) After the program loads click on the Scatter-loading and there's and scatter file inside the SP_Flash tool folder go to SP_Flash_Tool_exe_v2.1121.01\SP_Flash_Tool_exe_v2.1121.01\Android and select the Scatter file
i)Now tick the recovery and press on it Now find the CWM file that is in the zip file ....
j) Now turn of ur device
k) Now this is important SO Be careful .....
Click the download button on SP_FLASH_TOOL and a timer starts So connect the phone between 12 sec' ( and make sure ur phone is off ) and the process bar will complete and and it will show you a green mark that means it worked !
I have included a video of how to Work with the SP_Flash tool
here is the videos ! https://www.youtube.com/watch?v=1Y1LuRu0NRA
In case u r having trouble with Youtube ! https://www.facebook.com/video/video.php?v=422494131141129
Now open Your phone while Holding the Power Button + Volume UP and a screen appear As Clockwork-mod 5........
the screen will look like this
Now make sure to make a backup of your current ROM ! Which is easy
in the Clockwork-mod menu use the Volume keys as up and down and and the Option button as OK ! So navigate to the BACKUP AND RESTORE Option ! and select backup as shown below
and here are the button config cause ur screen will not work around here
and how to make the backup
it might take a while !
And after the backup finishes .... and show successful Disconnect the cable and power off the device .....
Now remove the SD card and Connect it to your Computer and Go to SD/Clockworkmod/ and cut the Backup folder and keep it safely on your PC !
Now Download this File http://www.mediafire.com/?hid0ega7lek65u9
Extract it .... And Copy the backup folder to Clockworkmod/ and put the SD in your phone,
Now again start your phone by pressing And Holding The Power Button + The Volume UP key until the Clockworkmod interface comes and now go to the Wipe data/factory setting and select Yes after that do wipe cache partition now go to Backup again and press restore and select the 2012-06-10.08.17.26 and next screen press the YES Option .. wait until it finishes and reboot the device Confused ? See screenshots below !
After Wiping Data and cache partion do this
and now selcet the 2012-06-10.08.17.26
Select yes and wait for it to be done !
Now start up the device and if it boots up fine then Congrats ! ( usually takes more time in the start time start-up )
Now download this file http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip and copy it to the SD card
Now power off your phone and go to Clockworkmod again and select install zip from SD and again select Install from SD and browse and select the Superuser.zip u have just downloaded and press OK ... again select YES and wait for it to finish and restart your phone and you will find the superuser app in the Application menu !!! here are the screen shots ! -
Install Zip from SD
Press Install Zip from SD again
and Locate the Superuser.zip u just copied to your SD
and wait for it to be finished
and Your are done now turn on your phone and u'll be rooted ! with a fresh rom !
Thats it ! its Done any Questions and Solutions Feel Free to ask me
If u find this useful then din't forget to hit the thanks buuton !
Need Cool Android App ?
heres my site - http://p.mobile9.com/sakibhasan57/gallery/
My FB - https://www.facebook.com/sakib.the.gamer
More Android tricks Coming Soonn
though i haven't this device but its a usefull tutorial. :good:
Thanks a lot.
is there any hotboot option in sp flash tool?
try to add some screenshots from pc and from device regarding rooting process.
Equama said:
though i haven't this device but its a usefull tutorial. :good:
Thanks a lot.
is there any hotboot option in sp flash tool?
try to add some screenshots from pc and from device regarding rooting process.
Click to expand...
Click to collapse
Hi ! Thanks !
This is the first time i posted in XDA !
And i took some screenshots too but how can i add em ?
like in the middle of the post ?
and gave a video tutorial for all SP_Flash tool work !
to add screenshot 1st upload that screenshot to any image hosting site like imgur.then copy the bb image code of that specific photo and paste in the middle. it will show image.
Equama said:
to add screenshot 1st upload that screenshot to any image hosting site like imgur.then copy the bb image code of that specific photo and paste in the middle. it will show image.
Click to expand...
Click to collapse
Ohhh ! I was puting the HTML code ..... btw thanks !
ok.you're welcome.
press Thanks button if i helped you.
brilliant job bro.!!! hats off to u....as a new comer u did an awsum job...keep it up...hope we'd c more development from u in the future....
shariaphobia said:
brilliant job bro.!!! hats off to u....as a new comer u did an awsum job...keep it up...hope we'd c more development from u in the future....
Click to expand...
Click to collapse
Thank You very Much ! Yeah u'll Probably Will ...
but the only disappointment was The XDA-rule I had to post 10 times before doing this :cyclops:
is this a duel sim phone?
your homescreen is looking nice. :good:
Yes !
Equama said:
is this a duel sim phone?
your homescreen is looking nice. :good:
Click to expand...
Click to collapse
Yeah ! It's a Dual Sim Phone
And Thanks ! It's Holo Launcher !
so w50 and a75 are same handset.this is a good sign.
Equama said:
so w50 and a75 are same handset.this is a good sign.
Click to expand...
Click to collapse
Yes !! Its totally the same !! All this Rooting rules Are almost same as A75 ... Even the Rom i've included is Micromax A75's. And i even updated the Karnel which was provided by Micromax officials !
sakibhasaN said:
Yes !! Its totally the same !! All this Rooting rules Are almost same as A75 ... Even the Rom i've included is Micromax A75's. And i even updated the Karnel which was provided by Micromax officials !
Click to expand...
Click to collapse
Bro, I dont want to change the rom, just help me to root and a2sd.
Thanks
Sent from my W50 using xda app-developers app
Hi Bro!
It will be real nice if you can post the recovery image only...
I have a Pakistani Clone of the Above stated phone... Qmobile A5
and I want to root it... as its nand is locked... i cant do that using SuperOneClick
I have all the tools just need the recovery image.
I would be real nice if you could post the recovery image only...
Thanks
Regards
---------- Post added at 03:26 PM ---------- Previous post was at 02:33 PM ----------
Hi again...
Apparently my device does not support bootloader download DA
How can i use BootRom Download DA?
This error is given by SP Tools...
Cannot pass bootrom start command via USB Cable
Error Image
[img=http://s12.postimage.org/kex1bvltl/error.jpg]
hello brother...
i was able to flash your recovery but now a bigger problem arise.
When I boot into recovery it just hangs at boot logo
Nothing comes after that...
My Phone is working... just not the recovery...
please help! :'( :'(
any help please...
---------- Post added at 03:22 AM ---------- Previous post was at 03:14 AM ----------
if you cant help with my device tell me how you modded it for your Phone...
I'll make the recovery... all those hours over Ubuntu will help
Tell me what changes I should make and etc...
I will be thankful...
ssm14293 said:
any help please...
---------- Post added at 03:22 AM ---------- Previous post was at 03:14 AM ----------
if you cant help with my device tell me how you modded it for your Phone...
I'll make the recovery... all those hours over Ubuntu will help
Tell me what changes I should make and etc...
I will be thankful...
Click to expand...
Click to collapse
I diden't understand your problem so well .....
Anyway here is the Recovery.img
The Problem is that when i flashed my phone with your recovery it now wont boot to recovery... just hang there on the logo...
the phone works fine normally but it just hangs on the recovery....
ssm14293 said:
The Problem is that when i flashed my phone with your recovery it now wont boot to recovery... just hang there on the logo...
the phone works fine normally but it just hangs on the recovery....
Click to expand...
Click to collapse
Well i have attached the original Recovery .. try flashing these one .... and try to boot up the recovery ...
if it boots up then maybe the CWM for Our is not working for your Phone !
reflashed it and it doesnt work...
Our phones are same... exact copy of each other... same finger print and everything... then how come mine has a larger mp camera and no 3g?
I mean its like the removed these feature.. but i know the didnot...
if something is disabled in kernel/boot it wont show up as it doesnt exist right?
(just a theory)

CWM recovery for KARBONN A18!!!

CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone

CWM For Micromax A45/Symphony W10

Heey ! ......
I am Here with The CWM For W10 ,
Though it is not tested yet ! Need some testers ! :silly:
Please Report back if this worked for you Guys !
Warning :I AM NOT RESPONSIBLE For ANY DAMGES TO YOUR PHONE OR YOUR BRAIN !
Here's how to get Clockworkmod recovery
with SP Flash Tool:
First install the drivers ! https://www.dropbox.com/s/i6ar6wyblnjo0g5/drivers_A45(2).zip
1. Download SP Flash Tool https://www.dropbox.com/s/a7ca3n6ummzy6vl/SPF Tool.zip
2. Download MT6573_Android_scatter.txt. https://www.dropbox.com/s/ns6pcbhvp2tiwb3/MT6573_Android_scatter.txt.txt
3. Download a45recovery-cwm.zip and extract it. https://www.dropbox.com/s/ovhca816rdihtev/a45recovery-cwm.zip
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode
Hit the Thanks Button if you like my Work !
sakibhasaN said:
Heey ! ......
I am Here with The CWM For W10 ,
Though it is not tested yet ! Need some testers ! :silly:
Please Report back if this worked for you Guys !
Warning :I AM NOT RESPONSIBLE For ANY DAMGES TO YOUR PHONE OR YOUR BRAIN !
Here's how to get Clockworkmod recovery
with SP Flash Tool:
First install the drivers ! https://www.dropbox.com/s/i6ar6wyblnjo0g5/drivers_A45(2).zip
1. Download SP Flash Tool https://www.dropbox.com/s/a7ca3n6ummzy6vl/SPF Tool.zip
2. Download MT6573_Android_scatter.txt. https://www.dropbox.com/s/ns6pcbhvp2tiwb3/MT6573_Android_scatter.txt.txt
3. Download a45recovery-cwm.zip and extract it. https://www.dropbox.com/s/ovhca816rdihtev/a45recovery-cwm.zip
4. Extract SPF Tool.zip and Run
Flash_tool.exe from there.
5. Click File->Open Scatter-loading file and
select the MT6573_Android_scatter.txt you
downloaded.
6. Now uncheck everything except
RECOVERY . Click on recovery and select
a45recovery-cwm.img you downloaded.
7. Now turn off your Micromax A45,
remove battery and put it back( DONT
switch it back on).
8. Press Download in the SP Flash Tool
window, then When the countdown starts,
connect your phone to PC.
9. After it's done, disconnect the phone,
remove battery and put it back. Boot the
phone into Recovery mode
Hit the Thanks Button if you like my Work !
Click to expand...
Click to collapse
check my also
in signatures
link no work plz upload another site....................................

ALCATEL ot 918n (2.3.5 / 2.3.6) how to ROOT and install CWM RECOVERY for NOOB

NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/zip/EahpxSml/Superuser-312_-efghi-signed.html
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
when your done on the steps above FLASH CMW RECOVERY by MARK, its universal CMW recovery for CUSTOMIZED ROM
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
------> after accomplishing the steps above DL this zip file >>>>> https://www.dropbox.com/s/3d1umegiill2s3s/recovery_2_3_5-6-signed.zip
-------> put it on the root of ur sdcard then flash it
*turn off your device , vol up+power, > install zip frm sd > chose zip file then flash it..
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
dont forget to say THANKS
Click to expand...
Click to collapse
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
diordna_j said:
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
Click to expand...
Click to collapse
glad to help.. ^_^
password for superuser.rar
working fine, thank you
flipsonder29 said:
password for superuser.rar
Click to expand...
Click to collapse
password: akosikhyla
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
ginger09 said:
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
Click to expand...
Click to collapse
wew..why on earth u put the downloaded files on your sdcard? what files you put on it?
help
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
Have a nice evening.
Please us your re-upload or another file sharing site in the http://forum.xda-developers.com/show...3162&nocache=1 page before you upload "download this.zip" file since it would need.
Thank you.
^_^
links updated.. ^_^
zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
DOWNLOAD THIS >>>>>>>>>> https://
www.dropbox.com/s/z71f7ao9wi...oad%
20this.zip - download not working. update please
thanks are you ako si khyla ?
thanks for this are you ako si kyla alcatel group?:fingers-crossed:
my phone just keeps on rebooting
what happened?
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I strictly followed all the rules but when I opened custom recovery, it stuck on the android logo (the start-up screen) for an hour.
can you please help me?
zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
i was stuck at step 3! huhuh my computer can't install my phone's driver, what shall i do?
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
:good: thank you so much your thread is very 100% works device :fingers-crossed:
heeelllllpppp urgent
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the powerbutton + volume up it displays theandroid symbol and Im stuck withit. Basically i cant open my phone. How can i fix this problem?please help!
i m facing problem
Hi
I haved followed the above procedure mentioned by u, but since then i m not getting incoming calls and and the home button also stopped working, i dont know where i made mistake but plz help me coz this is my friends phone as he was facing low memory problem so by having faith on xda i took his phone to root it and uninstall unwanted apps to free up some space.
I also tried flashing two different custom roms but it goes in boot loop and i also flashed it with stock rom again boot loop problem.
Plz hel me its urgent i had to return this phone to my friend.
My phone USB is broken. Is there any way to install recovery, or root phone from sdcard, or any other method?
pano gagawin ko ?
kuya/ate pano po ito ? natapos ko nmn po yung sa may custom recovery pero kpag nag(vol up + power) di nmn nag iba yung recovery boot :3

android one full flash (with guaranty ) + nvrm fix + imei fix as

hello android one users
this is my first post so please hit thanks .
please read full thread then do anything .
I am going to tell you how to get your mobile at the stage where you gain your warranty back ,
and your phone will appear brand new as u bought it .
1. flash stock rom with sp tool . (must have boot loader unlocked) hear http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/
2. after successfully flash start your phone and enable usb debugging
(settings ->about phone->tap 4-7 times Build number now go back to Developer options ->usb debugging )
also enable unknown source
(settings ->security -> unknown source )
3. u must have installed your phones usb driver and phone must have some charge to survive at least 15 min . hear http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/
4. download the tool named ALL-IN-ONE-TOOL hear http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696
5.download fix all a1 hear https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing
and create imei by this http://forum.xda-developers.com/showthread.php?t=2399037
copy the created imei file named "MP0B_001" to
fix all for a1.zip\data\nvram\md\NVRAM\NVD_IMEI copy and replace ( just drag and drop )
then place this zip to your phone sd card .
6. extract it and open all in tool .exe . it take a while .
follow instructions
when the main menu comes type 4 to select custom recovery
it will ask is your bootloader unlocked ?
type 2 "no" .
then it ask choose recovery
type 1 "cwm recovery " .
now connect your phone and see your device must show usb debugging . tick if your phone say something like pc or lapi mac address.
7. now your phone boot into recovery
use up down button and power button to select
go to install zip (second option )
install zip from sd select the zip from sd
press power button and flash zip
______________________
reboot
done
now you have your warranty
working imei
and nvrm in wifi fix .
and your phone is unrooted .
you can install lollipop ota . (when it comes)
A. if your phone working fine after flashing stock rom then leave rest of the steps .
B. if you facing only nvrm error in wifi then then download this zip hear https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing
and flash it into recovery
c. if imei + nvrm not working do all steps .
y. please hit Thanks and tell me if any error in this .
z. thanks xda and all known unknown sorces and dev.
thanks
http://forum.xda-developers.com/showthread.php?t=2399037 for imei
http://forum.xda-developers.com/cro...l/tool-master-tool-unlock-bootloader-t2997696 all in one tool
http://thebroodle.com/micromax/a1/stock-rom-micromax-canvas-a1-android-one-official-stock-rom/ stock rom
http://www.theandroidsoul.com/downl...501-drivers-usb-adb-windows-8-1-8-7-vista-xp/ driver
https://drive.google.com/file/d/0Bw6KjdLHY2s0MkFrZUdNVVpLM28/view?usp=sharing fix all
https://drive.google.com/file/d/0Bw6KjdLHY2s0c0trcC1KNTVJQzA/view?usp=sharing nvrm fix
i am not responsible for any kind of error or break . do at your own risk . (its safe {i think })
wifi stuck on "turning wifi on" :'(
i unlocked the bootloader and flashed 5.1 initially (it got some wifi connection problems) so flashed cm12 which makes my wifi to stuck at "Turning wifi on"
now to make things straight i went back to my stock version 4.4.4 which still doesn't fix my problem
some one please help me......................
I did it in this way.
Use sp flash tools and flash stock rom. select firmware upgrade. done.

Categories

Resources