Related
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Good Job done
Built from source or using web builder?
i cant flash this through sp - tool
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Credits:
I, Me & Myself..
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
while downloading i got the error
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
First Check if the MTK drivers are installed, check it by going tinto the device managers hardware section in my computer
If it is proper then try connecting your phone without the battery inserted
Same problem..
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
i ported this recovery from a ZOPO Z900 Leader chinese android handset...i tried building from source, but i failed at it because of partition style in a18...
For people facing problems flashing it through sp tools, u all can try to flash it using another pc or alternatively view this youtube video -> http://www.youtube.com/watch?v=969xwsUTkSY
ujjwalk308 said:
I'm facing the same problem.. I tried with battery in and out.. have installed the drivers as well..
Click to expand...
Click to collapse
Same problem here.
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
vshlkmr said:
Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!
Click to expand...
Click to collapse
Ok.now waiting for the bugfix.
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
always usb cable error
Connect usb cable & discconet auto & charging mode
this is usb driver ????
great job. im a noob at this so will try after people posting have successfully ported the cwm to their phone
There are two recovery.img files in your attachments. recovery.img and cwmfinal.img. Which one should be used in sp flash tool?
I recently purchased Karbonn a21, can I try this on it?
Sent from my GT-I9300 using xda app-developers app
Thnx bro worked like a charm.
Sent from my Karbonn_A18 using xda app-developers app
fail root
plz send device manager screen shot
Can anyone please upload stock rom of karbonn a18. My device stock at boot animation screen.
Sent from my GT-P1000 using xda premium
reach2dinu said:
while downloading i got the error
Click to expand...
Click to collapse
same problem any help pz
Cwm flashed
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
vshlkmr said:
CWM RECOVERY FOR THE KARBONN A18!!
Hey guys!! Finally i ported the ClockWorkMod ICS recovery (non-touch) onto our device!!
For people who dont know what CWM recovery and its benefits are, read this -> http://www.addictivetips.com/mobile/what-is-clockworkmod-recovery-and-how-to-use-it-on-android-complete-guide/
So, here are the steps on getting the CWM on Karbonn A18-
What you need
1. Karbonn A18, data usb cable.
2. Download the CWM recovery image file from the attachment below this post.
3. Download SP Flash Tool from my another post -> http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
4. Download MTK6575 Driver from -> http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
5. Download the MTK6575 Scatter.txt file from the attachment below this post.
Installation Steps-
1. Unzip and Install the MTK6575 USB drivers on your Windows PC, just run setup.exe.
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2. Copy the CWM recovery file that you downloaded from my attatchment. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5. Click on Options, check USB mode.
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your downloaded scatter.txt file. By default you will have only one map file of name MT6575_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked. Now click on the "RECOVERY" just right to the checkbox and browse and select the cwm.img file you downloaded from the attachment below.
9. Now click on "Download" on the Application or press F9 on keyboard. Warning messages will occur, but ignore them..
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Down button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
BUGS / Not functioning features :
Backing up the data not working
USB mount SDCARD through recovery not working
Credits:
I, Me & Myself..
EDIT:
i have tried removing some bugs, try and tell me u all!!!
I have also included the stock recovery.img file in the attatchment for people who want the stock recovery.
********************Anyone having problems can flash the cwm using the mobile uncle tools application....download that from the play store!*********************
..& hey plz if u think i deserve thanks then don't forget to thank me by pressing the thanks button below :victory:
Click to expand...
Click to collapse
will you please give CWM for Micromax A90 specification maybe same as A18
here is Specification
Micromax A90
Super Amoled Plus LCD with 262 k
MTK6575 CPU 1 Ghz
512 MB RAM (350 - 400) User available
512 MB ROM ( its not RAM ) for apps
2.5 GB external SD for media file ( Music/Video,,,etc.)
8 Mega Pixel Camera + 0. Mega Pixel Front Camera
Android OS 4.0.3
with Rooted cell
plz help us to create new CWM + Custom ROM
also its same specification from some Chinese Brand like Zoppo / Hero / Gionnee / HDC
plz help.
Pritesh.mohan said:
I have successfully installed cwm on my karbonn a18.
I did it wit the help of mobileunckle tools.
What are the next motives now??
1) can we change the battery indicator at the notification area to percentage signs?
Click to expand...
Click to collapse
You could do that before flashing Cwm aswell.. Use rom toolbox.. I did it the day I got this phone
Hello Everyone !
NOTE : i am not responsible for Dead SD cards , bricked Phones
As Some of you know The Symphony W50 and the Micromax A75 is the but is also has some differences ...
This for all the user of Symphony W50 in Bangladesh .....
Fully Screenshoted
Well ... Symphony W50 and MMX A75 is not the same but almost the same !
So in order to Enjoy a Custom rom that was made for A75 you have to Flash all the A75 files .
The driver for Symphony W50 -
The Driver installation !
a) Now download the drivers from this link https://sites.google.com/site/ultimatebrainguide/micromax-a75/installing-drivers ( If you have 32bit download the 32bit ver. and if u have the x64bit download the x64-bit ver )
b)Download your preferred driver and Copy and paste it to your desktop and install it !
c) Driver installing Instructions -
The the driver_win_64.exe as administrator or it will fail
When it tell you to press enter - Press Enter
Now type one and press enter then there are 3 options choose your windows and type the number and press enter and you are good to go !
d) Connect the device -
Connect the device and check the Device installs successfully !
2nd Step : Making your phone what is supposed to be !
1.Download this first ! http://www.mediafire.com/?2bd9c888k21ll3g
2.Then Download this http://www.sendspace.com/file/19ma4k
3.Extract both of the files
4.Go to the SP_Flash_Tool folder and and Open Flash_Tool as Administrator .....
5.Click on the Scatter-Loading And select the file MT6573_Android_scatter from the other file you downloaded As A75_0201_V3006
6.Now untick Preloader
87Again go back to SP_FLASH_TOOL window and Click on the recovery and select the CWM.img file you just downloaded !
8.Now Make sure your phone is turned off and also the cable is disconnected ! ......
9.Now press Download on the SP_FLASH_TOOL and as soon as the Timer starts Connect your phone ........
10. Now this will take a While ! And Your phone will boot up with the Stock ROM !
3rd Step : Are we there yet ?
1.Now download this http://www.mediafire.com/?9yqj5si81kzapeg and Copy it to the Root of your SD card ( No need of Extracting )
Now Power Off the phone and Start it By Pressing Volume UP and Power Button !
Now a Screen like this will come .......
Now Do As Showed Below !
First Do wipe data/factory reset
The Select Yes ....
After That do a wipe cache partition
Again Select Yes
Now Navigate to Install Zip from SD card
Now ... Choose Zip from SD card
And Now Browse for the ROM (ZIP File) You copied to your SD and Select it !
Again Select Yes .....
And Wait for the Installation to be finished !
After Installation Finishes Go back and Reboot the Phone !
Wait it's not finished Yet .... Still There's a Lot !
Nah ...... Just Kidding ... You are all done !
Note : First time it will take much more time to boot up so be patient Please !
Incase if you need the backup ! http://www.mediafire.com/?08313k3b3cbm8pb
Now this Rom is Named SilverLight_4
There are Ton of other roms for MMX A75 feel free to try those too ......
Hit the Thanks Button if This Helped You !
need help !!!!
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it
Sajib6t9 said:
i install this rom bt when i lock my phn when i try to unlock it the screen turns white,and i cant do anything....i have 2 remove my battery.......plz solve it
Click to expand...
Click to collapse
Change the boot.img to original in the custom rom, then try it
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/zip/EahpxSml/Superuser-312_-efghi-signed.html
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
when your done on the steps above FLASH CMW RECOVERY by MARK, its universal CMW recovery for CUSTOMIZED ROM
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
------> after accomplishing the steps above DL this zip file >>>>> https://www.dropbox.com/s/3d1umegiill2s3s/recovery_2_3_5-6-signed.zip
-------> put it on the root of ur sdcard then flash it
*turn off your device , vol up+power, > install zip frm sd > chose zip file then flash it..
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
dont forget to say THANKS
Click to expand...
Click to collapse
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
diordna_j said:
thank ypu so much your tut 100% works in my alcatel one touch 918N ,,,,
Click to expand...
Click to collapse
glad to help.. ^_^
password for superuser.rar
working fine, thank you
flipsonder29 said:
password for superuser.rar
Click to expand...
Click to collapse
password: akosikhyla
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
ginger09 said:
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the power button + volume up it displays the android symbol and Im stuck with it. Basically i cant open my phone. How can i fix this problem? please help!
Click to expand...
Click to collapse
wew..why on earth u put the downloaded files on your sdcard? what files you put on it?
help
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/ucdvhqlefmktgna/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/dfvth3ep9o8bu1u/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
Have a nice evening.
Please us your re-upload or another file sharing site in the http://forum.xda-developers.com/show...3162&nocache=1 page before you upload "download this.zip" file since it would need.
Thank you.
^_^
links updated.. ^_^
zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
DOWNLOAD THIS >>>>>>>>>> https://
www.dropbox.com/s/z71f7ao9wi...oad%
20this.zip - download not working. update please
thanks are you ako si khyla ?
thanks for this are you ako si kyla alcatel group?:fingers-crossed:
my phone just keeps on rebooting
what happened?
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I strictly followed all the rules but when I opened custom recovery, it stuck on the android logo (the start-up screen) for an hour.
can you please help me?
zatanika said:
links updated.. ^_^
Click to expand...
Click to collapse
i was stuck at step 3! huhuh my computer can't install my phone's driver, what shall i do?
zatanika said:
NOTE: READ with UNDERSTANDING and CAREFULLY FOLLOW THE STEPS INDICATED BELOW
IM NOT HELD RESPONSIBLE IF SOMETHING BAD HAPPENED TO UR PHONE
GOT IT? GET IT? GOODDDDDDDDD!!!!!... ^_^
*****Installing Custom Recovery for Unrooted / Rooted Phones*****
REQUIREMENTS:
DOWNLOAD THIS >>>>>>>>>> https://www.dropbox.com/s/z71f7ao9wio6vvi/download this.zip
note --->> extract all the RAR files in DOWNLOAD THIS folder
1. Android Usb Driver (PDA Net)
2. Android MT65xx PreLoader driver (xp/vista/7)
3. Android MT65xx Vcom driver (xp/vista/7) use this in case if PreLoader won't work
4. Alcatel One Touch Installer (use this IN CASE MT65xx PreLoader and Vcom drivers doesn't work)
5. SP Flash Tool
6. SCATTER FILE
7. RRECOVERY IMG FILE
8. USB DATA CABLE of your phone
9. YOUR DEVICE
10. USB DEBUGGING ENABBLED on your device -->>> (Settings > Application > Development > USB debugging)
***************************************************************************
HOW TO:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
>>> [ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is. Then press OK / Next. If prompt, choose “INSTALL DRIVER ANYWAY” OR
>>> [ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
**NOTE: If nothing happens after plugging then boot to recovery by TURn OFF first your ddevice then PRESS and HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
- Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading.
4. Look and find the scatter text file and open it.
note: the ver of scatterfile to choose should be the same ver of your device ( ex. ur device is 2.3.6 the you should choose 2.3.6 scater file)
5. Ignore and tick OK.
6. Check the box with the name "Recovery". Then look for the downloaded recovery file.
And open it.
7. Tick Option from the menu and check USB Mode.
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked.
9. Plug your cellphone via your usb cable. Then wait for it to be finish.
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2. or try to install Alcatel Android Manager
10. A yellow bar will appear. Wait for it to reach 100%.
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
*****Rooting the phone******
Requirements:
- Unrooted Phone
- Accomplished the method above. Or a Custom Recovery is already Installed
- SuperUser Zip file
>>>>>>> http://www.4shared.com/rar/a0y6F3s6/superuser.html
password:
akosikhyla
How to:
1. Copy and paste the downloaded zip file to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard
4. Choose zip from sdcard.
5. Choose the file downloaded. (Superuser zip file)
Then confirm update.(choose YES -Install SuperUser)
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
when your done on the steps above you should UPDATE your cwm recovery( this is important for flashing CUSTOM ROMS..etc)
>>>> follow the steps below:
*****CWM RECOVERY by SIR MARK
----->>>
https://www.dropbox.com/s/c6gryly8x1nxu9w/CMW_recovery_by_mark.zip
1.place the zip file(CWM_recovery_by_mark.zip) to sd card
2.go to recovery mode (vol up+power)
3.select "install zip from sdcard" then select "chose zip from sdcard"
4.locate the CWM_recovery_by_mark.zip then choose yes
5.wait until installing process done "!"
6.reboot.. DONE
---------------------------------->>>>>>>>> (optional)
CWM RECOVERY of SERGEY
http://www.4shared.com/zip/ijDqcind/recovery_2_3_5-6-signed.html
**************
POSSIBLE PROBLEMS THAT you MIGHT ENCOUNTER
PROB: paRtition change... etc
ANS: possible you used wrong SCATTER FILE
PROB: your device is undetectable
ANS: might be on the USB PORT or not SUCCESSFUL in installing the driver
for more possible QUESTIONS and ANSWERS go here;
>>>>>>> https://www.facebook.com/groups/237...m/groups/237333346380882/doc/446069185507296/
*********
there ur good to flash any kind of roms u want.. CREDITS to those who made the files... ^_^
****CREDIT to SIR RAIN of Symbianize
to Obcenity for the real creator of Tutorial
to Jbazt_katuforzs for the Flash Tutorial
dont forget to say THANKS
Click to expand...
Click to collapse
:good: thank you so much your thread is very 100% works device :fingers-crossed:
heeelllllpppp urgent
Help! After putting the downloaded zip file to my SD Card then turned off the phone and reboot by pressing the powerbutton + volume up it displays theandroid symbol and Im stuck withit. Basically i cant open my phone. How can i fix this problem?please help!
i m facing problem
Hi
I haved followed the above procedure mentioned by u, but since then i m not getting incoming calls and and the home button also stopped working, i dont know where i made mistake but plz help me coz this is my friends phone as he was facing low memory problem so by having faith on xda i took his phone to root it and uninstall unwanted apps to free up some space.
I also tried flashing two different custom roms but it goes in boot loop and i also flashed it with stock rom again boot loop problem.
Plz hel me its urgent i had to return this phone to my friend.
My phone USB is broken. Is there any way to install recovery, or root phone from sdcard, or any other method?
pano gagawin ko ?
kuya/ate pano po ito ? natapos ko nmn po yung sa may custom recovery pero kpag nag(vol up + power) di nmn nag iba yung recovery boot :3
Please quick answer !!!
http://forum.xda-developers.com/galaxy-note-10-2014/general/root-root-stock-kernel-t3240218
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
kacper12897 said:
And could someone explain to me step by step how to upload the root and recovery ? Because I too unknown to android .
Click to expand...
Click to collapse
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
thank you for the guide buhohitr.
worked perfectly for me
buhohitr said:
You can find how to root here. FULL CREDITS GO TO Zionator as he wrote up the instructions.
Easy Guide to Root :
1. Go to Rooting Guide - http://forum.xda-developers.com/gala...6#post63637426
Download only the P605 modded boot IMG and then come back here. Move the tar to tablet. "In my opinion that guide is very confusing" This is much more simple...
2. Go to TWRP (download version 2.8.7.0) - https://dl.twrp.me/lt03wifiue/
Download the img.tar This file you keep on pc to flash via Odin.
3. Go to SuperSU v2.52 Beta - https://download.chainfire.eu/743/Su...erSU-v2.52.zip
Download the zip. Move the zip to tablet.
4. Reboot the tablet into download mode and open Odin on the PC then connect the tablet to PC. In Odin click AP tab and locate the TWRP and uncheck Auto-Reboot then hit start. When done hold the power button + vol up button "the vol button furthest from power button" + home button til you see red writing on top right hand corner. This can take a while so don't panic just wait.
5. When finished booting into TWRP pull Spen and click Install then find modded boot img "remember to switch between IMG & ZIP mode in the lower left hand corner" Now flash the boot img. Do not reboot just go back and switch back to ZIP mode and flash SuperSU when done reboot.
6. Wait for the boot to finish. You are now rooted.
I hope this makes it easy for you!!!
Click to expand...
Click to collapse
404 Page Not Found
Oh snap! Something broke! A genius monkey has been alerted.
Until he fixes it, use our glorious search tool to find ROMs, apps, tools, and other sweet mods for your phone.
haha.... http://forum.xda-developers.com/gala...ernel-t3240218
Guide for Install TWRP & Root Moto_C_Plus With Locked Bootloader
I have ported TWRP recovery for Moto C Plus
TWRP porting guide followed on xda [thanks for xda]
Code:
Follow instruction correctly..try at your own risk..i'm not responsible for if your device bricked..
Here is the step by step procedure for install twrp recovery on moto c plus with locked bootloader
Instructions:-The simple way to install twrp recovery on devices,, is to unlock the bootloader..and flash the recovery through fastboot..
I'm going to show you step by step instructions to flash the twrp on moto c plus WITHOUT unlocking the bootloader or lose any data.
1. first thing u need to some files..
Download and extract my ported recovery & files from here Tools NEW G-DRIVE LINK UPDATED!!!
Code:
[I][FONT="Times New Roman"][COLOR="Red"][SIZE="4"]note:[/SIZE][/COLOR][/FONT][/I]after dowloading file..
extract it and copy [I]SuperSU-v2.82-201705271822.zip[/I] file in ur sd card,,,,
DONT FORGET to flash SuperSU-v2.82-201705271822.zip file
after write memory ,,otherwise your device will stuck at
moto logo or soft brick
2.Open download tool(file provided in the above link,use provide sp_flash tool only because moto c plus have secure chip,need to authentication file,, so u cant flash through normal sp_flash tool) and load the download agent "MTK_AllInOne_DA.bin" & authentication file auth_sv5.auth from download_tool folder
3.Load the scatter-file found in the provided file.. select preloader only..but don't flash it.
4. Click Alt + Ctrl + V to activate advanced mode in sp flash tool.
5.Click on "window" up there and select "write mode"
6. Change the Begin address to "0x2d80000" and click on "file path" and choose the TWRP RECOVERY.img from extracted provided zip file
7. Click on "write Memeory", then Power off your device and remove the battery.. press and hold vol- button, then connect phone to pc via USB cable.. press &hold vol- key until pc detect...wait for Write memory ok window appears,, now your recovery is ready.
8.Next insert ur battery, press vol+ and power button simultaneously.. than select recovery mode..& boot into recovery
9.In twrp recovery select install and locate SuperSU-v2.82-201705271822.zip file in ur sd card and flash it..
10.After successful flash... hit reboot device..
!!!NOW YOU ARE ROOTED MOTO C PLUS!!!! Enjoy!!!!:good::good:
...Image Instruction are also available in attached file..
For Compiled twrp go here Compiled Twrp
XDA-DevDB Information
TWRP For Moto C Plus with locked bootloader. Tool/Utility for all devices MT67xx
Contributor:
shr!pad
Created:13-12-2017
Last Update:02-05-2018
If u like my work, hit like button....
In ticked preloader , wut can I choose Broo.. ( TWRP RECOVERY.img ) ,??????
---------- Post added at 11:37 AM ---------- Previous post was at 11:32 AM ----------
Any Mtk Drivers Needed for pc to detact phone ????
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I get this error
S_FT_ENABLE_DRAM_FAIL (0xFC0)
[EMI] Enable DRAM Failed!
[HINT] Please check your load matches to your target which is to be downloaded.
check..image instruction.. All files must be loaded..
And check u r enterd beginning adress 0x2d80000 is correct..
See instruction correctly..i think u r problem..in connecting phone...
Read instruction again..said that..press and hold vol- key then connect usb to phone..hold vol- key untill write memory ok window appears..?
Welcome
u dont need to add twrp recovery in download section..u need to select twrp recovery in write memory...see in attached images..
Yes..u need mtk vcom drivers for detect phone..
I double checked evey file and the begin adress, and i remove the battery hold vol - and connect the phone until in the status shows write memory but getting the same error in my 1+16gb
In the note section, u have mention flash SuperSU-v2.82-201705271822.zip file after write memory, this has to be done in the 9th step??
Yes..that to be done in 9th step
Yes..that to be done in 9th step
check that, r u installed vcom drivers correctly....is required for detect u r device..
Bro , TWRP successfully flashed but after flashing TWRP my moto c plus was not booting up strucking on MOTO LOGO ( I again flashed full firmware for use my phone )
Thanks for your work. I'm getting the Dram error as well.
Have double checked all the steps, using supplied cable and tried different ports on the PC.
My device is XT1723. Could it be that this version of TWRP is not correct for my device?
Kindly give proper credit
work on Xt1726 too?
After several unsuccessful attempts on XT1726, this method does not work... But, thank you for your hard work!
u need to flash super su file.. after writing the recovery provided in link.. otherwise u will bricked..read 9th step,,,,it's the problem u have facing
it's correct twrp.. i think ur problem..in drivers,, first install vcom drivers for detect the phone..
yes..thank you.. u need to first install usb vcom drivers for detect phone...