Reboot option in stock 2.2 - Desire Q&A, Help & Troubleshooting

Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?

chillout23 said:
Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?
Click to expand...
Click to collapse
opet ti
since u have a sense ROM , check this link

Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate

chillout23 said:
Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate
Click to expand...
Click to collapse
how to install:
* please make sure your device/setup meets the requirements above
* check your framework build number (settings >> about phone >> software information >> build number)
* download the archive that matches your build number
* copy it to your sdcard and flash it in recovery mode (as always, it is advisable to do a nandroid backup prior flashing)
check your framework build number, download the .zip that matches ur build number, copy the file to microsd, enter recovery (turn off device then press power + vol down and keep holding till u get the white screen) , use vol up/down to navigate to then press power button to enter Recovery , in recovery u navigate using the trackball, there u chose flash .zip file from sd card, u chose the file u want (the one u downloaded and copied to the card) and that's it

Ok...i'll try it when i'll be back from my job...
thanks again and again...and again

So...I found app on Applanet HOT REBOOT App works like a charm

Related

Flashing a Recovery,Kernel and Rom[FAQ'S][NOOB FRIENDLY]

Easiest guide to flash a custom ROM and custom kernel
Lets accept it,we all have been here,confused what should do after i root/boot unlock
we think i know enough so lets get this going but then, we get stuck in the splash/welcome screen and we think **** this was such a bad idea
SO i created this thread for anyone who ever is confused,lost,seeking help.
IF YOU FIND THIS THREAD HELPFUL, BE SURE TO RECOMMEND IT TO OTHERS AND PRESS THE THANKS BUTTON :d
Thread Contents
1.Common terms/Android Slangs
2.Basic Requirements
3.Download links for Recovery Images for PRIMO U/ PRIMO C]
4.How To flash recovery
5.FAST BOOT FILES(download links) : HTC ONE V DRIVER (DOWLOAD LINKS)
6.How To Back Up Your Current Rom
7.Installing Your ROM
8.Choose Your Kernel(download links)
9.Flashing The Kernel[windows]
*Flashing The Kernel[MAC]
10.people who have already flashed a ROM and are confused how to upgrade it
11.Upgrading KERNEL
12.Stuck in Bootloops, Cant Pass the HTC welcome Screen
13.Some tips from me
Click to expand...
Click to collapse
Hope u have successfully rooted and boot unlocked
Common Terms/Android Slangs
a small guide on some of the android terms my Diablo67
Bootloader:This small program's only job is to load other data and programs which are then executed from RAM.Often, multiple-stage boot loaders are used, during which several programs of increasing complexity load one after the other in a process of chain loading.
Fastboot:A diagnostic protocol used primarily to modify the flash filesystem in Android smartphones from another computer over a USB connection. It is part of the Android Debug Bridge library.
Utilizing the Fastboot protocol requires that the device be started in a boot loader or Second Program Loader mode in which only the most basic hardware initialization is performed. After enabling the protocol on the device itself it will accept any command sent to it over USB via a command line. Some of most commonly used fastboot commands include:
•flash - Overwrites a partition in flash with a binary image stored on the host computer.
•erase - Erases a partition in flash.
•reboot - Reboots the device into the either the main operating system or the system recovery partition.
•devices - Displays a list of all devices (with Serial #) connected to the host computer.
Flashing:The ROM memory used in smartphones and tablets etc. is often same as flash memory found in SD cards and USB flash drives, simply optimized for better speed and performance while running the operating system.
Kernel:A kernel is a layer of code that allows the OS and applications to interface with your phone's hardware. The degree in which you can access your phone's hardware features depends on the quality of code in the kernel. The homebrew (rooting) community for HTC has made several kernel code improvements that give us additional features from our hardware that the stock kernel does not. When you flash a custom ROM, you automatically get a kernel. But you can also flash a standalone kernel ROM on top of the existing one, effectively overwriting it. These days, the difference in custom kernels is less about new features and more about alternate configurations. Choosing a custom kernel is basically choosing one that works best with your ROM.
Nandroid:To backup the current running rom.
Recovery Mode:A small separate operating mode you can boot your device into, used for device administration. Two popular custom recovery modes are Amon Ra and Clockwork.
Basic Requirements
1.A Boot-unlocked and Rooted HTC One V
2.Charge it till above 75% battery
2.A PC(this guide is for now only for windows)
3.usb cable
4.HTC driver download here or HTC SYNC
5.FastBoot Files[ click here>>> download them and put in a folder in c drive ]
> example c:\fastboot or c:\android
6.A recovery image(for image scroll down)
7.A Rom(thats ur choice)
8.boot image(scroll down)
9.put the rom(.zip file) in sd card
Here Are The Recovery Images
Recovery Images[PRIMO U/GSM]
1. CWM 6 by Lloir
2. TWRP 2.6.0 <<Ill Recommend [very user friendly]
3. CWM v5 Touch Recovery
Recovery Images[PRIMO C/CDMA
1. [VM/PRIMOC][RECOVERY] CWM Recovery
2. [VM/PRIMOC][RECOVERY] TWRP2 Recovery
3. [RECOVERY] [PRIMOC/CDMA] CWM 6.0.1.5
How To flash recovery
HOPE U HAVE THE FAST BOOT FILES
[IF NOT]
click here download them and put in a folder in c drive
example c:\fastboot)
>>Now enter Fast boot(power button +volume DOWN(for 15 + sec))<<<
u might have arrived at Hboot boot mode>>> now move up down by pressing the volume buttons and select fastbootwith the power button
Flash it via cmd(command prompt)
Enter these commands
Code:
[B][COLOR="Red"]fastboot flash recovery recovery.img
[/COLOR][/B]
How To Back Up Your Current Rom
(must for first time flashers)(nand=backup of current ROM)
1. Once the CWM/TWRP recovery installed:
Now enter Fast boot(power button +volume DOWN(for 15 + sec))
now move up down by pressing the volume buttons and select fastbootwith the power button
2. Once you are in the RECOVERY menu:
click backup and restore
click backup
the backup process is running. It will be a max 20 minutes to complete.
(optional step just to be sure)
3. once complete, check whether the backup is successful
click backup and restore
click restore
you will see your backup files, for example 2012-11-27 11-7
it should complete with in a span of time
4.Now if that is over go back to the previous menu
use the back button
click reboot system now to boot your device
Installing Your ROM
5.just do a factory reset and wipe cache, then click on install from sd card
6.flash it(the ROM in ur sd card shud be in a .zip format)
7.NOW.DON'T REBOOT UR PHONE GO TO FAST BOOT MODE (VOLUME DOWN+ POWER BUTTON)(or there will be a option to reboot into bootloader)
Choose Your Kernel
9.download whichever kernel u want
[CDMA/PRIMO C]
SuperSick kernel Click ME
SICK kernel PRIMO C/CDMA click here
[GSM/PRIMO U]
SuperSick kernel Click ME
SICK kernel CLICK here
TITANIUM KISS kernel SENSE users CLICK here
HELLBOY kernel FOR AOSP based ROMS(cm9/cm10/AOKP/PA)USE THE LATEST ONE FOR 4.2.2 >click<
Flashing The Kernel[windows]
8.HOPE U HAVE THE FAST BOOT FILES (if not click here download them and put in a folder in c drive)
rename it boot.img and put it in the folder as the fastboot files
GO TO FAST BOOT MODE (VOLUME DOWN+ POWER BUTTON)(or there will be a option to reboot in recovery)
10.flash it via CMD
Enter these commands
Code:
11.[B][COLOR="Red"]Fastboot flash boot boot.img [/COLOR][/B]
12.[B][COLOR="Red"]fastboot reboot[/COLOR][/B]
Flashing The Kernel[MAC] by kalaker
kalaker said:
Go developer.android.com and download the SDK & move it to your home directory ("~" or /Users/<username>)
Go to <sdk-location>/tools and launch "Android"
Download the platform tools
Open terminal
Open Finder to <sdk-location>/platform-tools
In terminal, type "sudo cp"; drag adb from the Finder window into the Terminal window; type "/usr/bin/"; hit enter
Enter your password
Repeat the above three steps, but drag "fastboot" instead of "adb"
Close terminal
Open terminal (it sounds weird, but just do it)
Now, and forever, do this to install a kernel:
Download kernel
Connect phone to computer
Make sure USB Debugging is enabled (Settings>Development>USB Debugging)
In terminal, type "adb reboot bootloader"
In terminal, type "fastboot flash boot"; drag in the kernel from finder; hit enter
Examples:
Code:
sudo cp /Users/Username/android-sdk-mac/platform-tools/adb /usr/bin/
sudo cp /Users/Username/android-sdk-mac/platform-tools/adb /usr/bin/
adb reboot recovery
fastboot flash boot /Users/Username/Downloads/boot.img
Click to expand...
Click to collapse
13.enjoy
First boot takes some time have patience......be sure to ask questions or doubts
Ok For people who have already flashed a ROM and are confused how to upgrade it
Upgrading ROM
1.download your needed ROM
2.put in SD card
3.boot into recovery
4.no need to wipe everything,wipe caches(and if the dev says to full wipe do it)
5. (Unless u come from a different ROM eg.From Amazing Sense To CM10, in this case a factory reset i needed
6.flash the ROM
7.reboot
8.flash GAPPS
9. enjoy
Upgrading KERNEL
1.boot in bootloader
2.do the required steps(as mentioned above)
3.wipe caches
5.enjoy
Stuck in Bootloops, Cant Pass the HTC welcome Screen
ok, calm down, everyone has this problem while flashing, i get it so many times, they can cause by the following reasons
bad flash
wrong rom
you forgot to flash the kernel
wrong kernel
messed up the order in flashing
ok,
1.Bad flash-this occurs if the .zip file is corrupted
solution:= re flash the ROM, if still no, download the file again and try
2.wrong ROM- u may have downloaded a ROM that is not for ur device or a ROM which is of not ur description
for example u might me a PRIMO C device/CDMA and u downloaded a PRIMO U/GSM ROM
3.Wrong Kernel-Kernel is the link between ur software and hardware, if u flash the wrong one like the case mentioned above , download the correct one and re flash
4.[ FLASHING YOUR KERNEL SHOULD BE THE LAST STEP][UNLESS U HAVE A S-OFF DEVICE]
Ok Some Tips Which May Help You
1.Battery Draining fast?
-----get an app called BetterBatteryStats,run it over night.then next morning open it and check whats waking your device
Click to expand...
Click to collapse
2.Can i use scripts?
-----Your wish, the rom works perfect,running a script can ruin it in some cases(chill,even i run some)
Click to expand...
Click to collapse
3.Good/best/recommended ROMS?
-----all roms are good in their own way, but i can give u a list of recently updated roms
-----1.sphongle(4.2.2) 2.Slimbean 3.Cm10
Click to expand...
Click to collapse
will add more cheers
Hope this helps u
another get thanks quick scheme thread?
Sent from my One V
paarthdesai said:
another get thanks quick scheme thread?
Sent from my One V
Click to expand...
Click to collapse
LOL :silly:
no i plan to help!
My works
You call that work ??
Those are just tips
Y do u have a problem with that
Sent from my One V
No but that work word is pissing me off ..... For using it in a inappropriate place
donhashem.dh said:
No but that work word is pissing me off ..... For using it in a inappropriate place
Click to expand...
Click to collapse
Don't read it
Sent from my One V
to clarify, step 6: "flash" should be edited to say " install ROM from zip" to avoid the "flash" misconception associate with flashing kernels:good:
more detailed work should be there.. like you said install cwm or twrp.... give a link to where they are embedded in the words will be good...
and the above goes for the flashing rom part also...embed the link to the dev section
make it easy and tidy instead of all those ugly looking clutters you did
Sent from my One V
will work into that!
did it!
cybervibin said:
flash it via cmd
Enter these commands
Fastboot flash recovery recovery.img
Click to expand...
Click to collapse
You forgot to mention to boot into fastboot. No offence, but it has to be much better written. Its not noob friendly at all.
m sorry abt that! guess missed it! wrote the thread throygh my phone!
any other problems i corrected the one u said!
cybervibin said:
m sorry abt that! guess missed it! wrote the thread throygh my phone!
any other problems i corrected the one u said!
Click to expand...
Click to collapse
Yeah, you could try creatign sub sections, like thinigs to have before swap, then steps after that. Eg in step 1 you say
>>Now enter Fast boot(power button +volume DOWN(for 15 + sec))<<<
and
1.Flash CWM 6 by lloir
or TWRP 2.3.1.0 ill recommend TWRP
>>PRIMO C /CDMA click here<<
To flash recovery HOPE U HAVE THE FAST BOOT FILES(IF NOT click here download them and put in a folder in c drive
example c:\fastboot
Click to expand...
Click to collapse
First you mention the ROM, then out of the blue you mention recovery. ROM should be introduced after a nand backup. You should also explain in short what a nand backup is. A sentence with an analogy is sufficient. I am a software developer and I would like to share a rule that I follow: If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Dont get me wrong, I am not trying to insult or berate or anything, but I got it read by a friend who wants to flash his One V, and he got back to me with more questions than the guide answered. There a some step holes in the guide, and you have to write is as if you are a noob
Lastly, thanks a lot, this particular guide and your answers have been really helpful to me and the community.
Cheers!
now ill consider that! hard being a noob!
thetuxracer said:
If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Click to expand...
Click to collapse
Nice, I liked this!
Sent from my One V using xda app-developers app
soham_sss said:
Nice, I liked this!
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
thetuxracer said:
Yeah, you could try creatign sub sections, like thinigs to have before swap, then steps after that. Eg in step 1 you say
First you mention the ROM, then out of the blue you mention recovery. ROM should be introduced after a nand backup. You should also explain in short what a nand backup is. A sentence with an analogy is sufficient. I am a software developer and I would like to share a rule that I follow: If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Dont get me wrong, I am not trying to insult or berate or anything, but I got it read by a friend who wants to flash his One V, and he got back to me with more questions than the guide answered. There a some step holes in the guide, and you have to write is as if you are a noob
Lastly, thanks a lot, this particular guide and your answers have been really helpful to me and the community.
Cheers!
Click to expand...
Click to collapse
how about now, noob friendly enough?
Yup, pretty cool! If there was a way to thank again..
ty!! please keep the recomendations coming!

I am donating USD 100$ to the person who will write a STEP by STEP guide

Hi Guys
I am currently on Mike's ARHD 18.2 Rom and I am thinking of reverting back to completely stock Jelly Bean Rom .
So I am donating a USD 100$ to the person who will write a STEP by STEP guide with links to the correct download points etc. But my stock Rom should be ROOTED and all necessary apps like Busybox , SuperSU, etc should be flashed too.
Also this guide should mention how to achieve those steps , for example
Insetad of saying , FIND OUT YOU PHONE'S CID , it should explain me how to find out the CID such as : Goto Bootloader Mode by pressing Volume Down and Power button > Fastboot USB > Then on your PC at ADB screen type - fastboot oem readcid etc. etc.
Currently I am on Mike ARHD Rom 18.2 , my HBOOT is 1.39
Regarding on how to choose which person will get the 100$ , I think the people who want to make this guide should post a message here and I will choose who and tell him to proceed with the Guide .
I am an XDA member since 2006 and my word is trustable . If you look at Mike's Donation list , I am the highest single donator as well.
I want to make myself clear once more , think of me as a person who does knows just a little on HTC and Rooting and Flashing and ADB and etc. So do not think of me as a professional like you guys.
I prefer somebody who already uses Mike's ARHD rom for One X .....
Thanks Guys
Procedure is very simple: relock your bootloader and flash JB ruu
Re: ROOTing my phone, want to make sure a few things
Sent you PM.
I said , the stock rom then should be rooted as well ......
Yes, yes. No problem at all.
I will compile you a totally noob proof step-by-step guide, just read my PM.
doublecheese said:
Hi Guys
I am currently on Mike's ARHD 18.2 Rom and I am thinking of reverting back to completely stock Jelly Bean Rom .
So I am donating a USD 100$ to the person who will write a STEP by STEP guide with links to the correct download points etc. But my stock Rom should be ROOTED and all necessary apps like Busybox , SuperSU, etc should be flashed too.
Also this guide should mention how to achieve those steps , for example
Insetad of saying , FIND OUT YOU PHONE'S CID , it should explain me how to find out the CID such as : Goto Bootloader Mode by pressing Volume Down and Power button > Fastboot USB > Then on your PC at ADB screen type - fastboot oem readcid etc. etc.
Currently I am on Mike ARHD Rom 18.2 , my HBOOT is 1.39
Regarding on how to choose which person will get the 100$ , I think the people who want to make this guide should post a message here and I will choose who and tell him to proceed with the Guide .
I am an XDA member since 2006 and my word is trustable . If you look at Mike's Donation list , I am the highest single donator as well.
I want to make myself clear once more , think of me as a person who does knows just a little on HTC and Rooting and Flashing and ADB and etc. So do not think of me as a professional like you guys.
I prefer somebody who already uses Mike's ARHD rom for One X .....
Thanks Guys
Click to expand...
Click to collapse
Check mike's threads! He is providing stock roms with root busybox etc...
Sent from my HTC One X using xda premium
I know that
All I need is a Guide, I can not risk making errors and bricking my device.
So guys please do not send me ideas or where to collect the info, you all know what I want and I am ready to pay for it.
I prefer a ARHD rom user to write the guide, but if there isn't any around, I will give TToivanen the go to write the guide.
doublecheese said:
I will give TToivanen the go to write the guide.
Click to expand...
Click to collapse
Thank you. First of all, please reply to your private message, I've got some things to ask.
Odp: I am donating USD 100$ to the person who will write a STEP by STEP guide
1: Download a stock ROM with root & busybox.
2: Put it into the phone's memory.
3: Get into recovery.
4: Make a factory reset/wipe.
5: Flash the ROM.
6: Reboot into fastboot.
7: flash boot.img
8: Reboot
9: Now you've got a stock ROM with the features you wanted.
Sent from my BMW E32 using XDA App
TToivanen said:
Thank you. First of all, please reply to your private message, I've got some things to ask.
Click to expand...
Click to collapse
Ok man, thanks for your energy
Please START the guide , I will reply your PM
But I don't use Gtalk that much just for your info ...........
OK EVERYBODY , DEAL IS CLOSED , TTOIVANEN WILL START THE GUIDE !!!!
Even if you didn't pay me i would have done it ..... of i got a 100 bucks from everybody here i wrote a step by step guide i didn't have to do any other work no more !
Why not just come to IRC? I can do the stuff remotely for you
Before you begin, make sure USB-debugging is enabled, and that you have more than 50% of battery!
Enable USB-debugging by going to settings -> developer options -> USB debugging​
First download the needed files
Stock ROM
boot.img
Flashable .zip that installs superuser and busybox
(Thanks to mike1986. for the original files)
Transferring the required files onto your phone's internal sdcard
Connect your One X to your PC
Copy One_X_3.14.401.31_odexed.zip and Android_Revolution_HD_Root_and_BusyBox.zip to your phone.
Keep the USB cable connected
​
Flashing the boot.img
Copy boot.img to the folder on your PC that contains the files for adb/fastboot
Open fastboot command prompt
Type the following commands:
Code:
adb reboot bootloader
Wait until you see FASTBOOT USB on your phone's screen. Then type the following commands:
Code:
fastboot flash boot boot.img
Code:
fastboot erase cache
Flashing the ROM and rooting
Disconnect the USB cable from your phone
Using volume buttons, navigate to HBOOT, confirm by pressing power button.
Using volume buttons, navigate to RECOVERY confirm by pressing power button. Device will boot into recovery.
select wipe/factory reset
confirm by selecting yes
select install zip from sdcard
select choose zip from sdcard
select One_X_3.14.401.31_odexed.zip
confirm by selecting yes
select install zip from sdcard
select choose zip from sdcard
select Android_Revolution_HD_Root_and_BusyBox.zip
confirm by tapping yes
Select reboot system now
​There you go! If you have any problems, hit me up on Gtalk!
TToivanen said:
Before you begin, make sure USB-debugging is enabled, and that you have more than 50% of battery!
Enable USB-debugging by going to settings -> developer options -> USB debugging​
First download the needed files
Stock ROM
boot.img
Flashable .zip that installs superuser and busybox
(Thanks to mike1986. for the original files)
Transferring the required files onto your phone's internal sdcard
Connect your One X to your PC
Copy One_X_3.14.401.31_odexed.zip and Android_Revolution_HD_Root_and_BusyBox.zip to your phone.
Keep the USB cable connected
​
Flashing the boot.img
Copy boot.img to the folder on your PC that contains the files for adb/fastboot
Open fastboot command prompt
Type the following commands:
Code:
adb reboot bootloader
Wait until you see FASTBOOT USB on your phone's screen. Then type the following commands:
Code:
fastboot flash boot boot.img
Code:
fastboot erase cache
Flashing the ROM and rooting
Disconnect the USB cable from your phone
Using volume buttons, navigate to HBOOT, confirm by pressing power button.
Using volume buttons, navigate to RECOVERY confirm by pressing power button. Device will boot into recovery.
select wipe/factory reset
confirm by selecting yes
select install zip from sdcard
select choose zip from sdcard
select One_X_3.14.401.31_odexed.zip
confirm by selecting yes
select install zip from sdcard
select choose zip from sdcard
select Android_Revolution_HD_Root_and_BusyBox.zip
confirm by tapping yes
Select reboot system now
​There you go! If you have any problems, hit me up on Gtalk!
Click to expand...
Click to collapse
Thanks man, you did it very well, just like a guide should be , really appreciated, send me your paypal address $$$
mike1986. said:
Why not just come to IRC? I can do the stuff remotely for you
Click to expand...
Click to collapse
Sorry I didn't know that ...
Anyway TToivanen made a great guide and now in a few minutes I will follow it step by step .
I already preordered my HTC One , and while waiting for it I will play around with my One X and I hope to get rid of the LOW VOLUME LEVEL bug I am faced with by going completely stock .
I realised on some calls the volume level seems OK, but in some calls the volume is so low I can not hear the opposing person if I am in my car or outside ( where there are other noises around)
Since 1 friend has a completely stock HOX , I hope to reach his Volume Levels when I turn stock , another friend has the ARHD 9.8 and his Volume level is much higher than mine too.
I think the Step by Step guide that is made by TToivanen is just perfect, this is how a guide should be done , some peoble write guides too but I barely see one this clear and easy to understand .
I agree, it's perfect. But not everyone is getting 100$ for writing those guides
doublecheese said:
I think the Step by Step guide that is made by TToivanen is just perfect, this is how a guide should be done , some peoble write guides too but I barely see one this clear and easy to understand .
Click to expand...
Click to collapse
It just looks like a copy and paste from other guides already available online IMO (no offence )
EddyOS said:
It just looks like a copy and paste from other guides already available online IMO (no offence )
Click to expand...
Click to collapse
Doesn't matter if copy or not, it is what I asked for and he did it
Really that lazy you have to pay people instead of searching lmao?
Sent from my HTC One X using xda premium

[CWM-Touch] Bootmenu for Defyxt-535

Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
test it and reply the queries
Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,
srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm
Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not
Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7
Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS
some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?
Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there
I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.
ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation
i like your rom
i like your rom and i'm waiting for your next rom~

[MEGA]Titanium S1,Cherry Flame2.0,KTouch U86 Kiss,Archos 45 Platinum

Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss , I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
NOTE:- Archos 45 Platinum too has similar device specifications.The same CWM version worked for @best98 who is using an Archos 45 Platinum.
Tip:Using CWM touch recovery
When using the CWM Touch recovery you may notice that it is not really working properly and that touch is not doing anything. The fact is the touch is being registered and that the touch method is different than normal android because of limited drivers in recovery.
The working
Use one finger touch to scroll
Use two finger touch to select item
Installing a Recovery Menu
Using PC
1) Install the Mobile Drivers.
2) Download Minimal ADB And fastboot [Windows users] Linux and Mac users might have to download the whole Android sdk as of now.
3) Download the recovery you want from the attachments below.
4) Rename them to recovery.img after extracting and copy it to a folder of know location.
5) Boot your device into fastboot mode.i.e Power on your mobile by pressing and holding Power button and vol+ Key.until you see A green screen.
6) Connect your device to the PC and open Minimal ADB and fastboot
7) Run the command " fastboot flash recovery C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG".
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
8) Wait untill it completes and VOILA new recovery installed.
Note: In case you want to preserve your stock recovery, run the command "fastboot boot C:\USERS\MYNAME\DESKTOP\ANDROID\RECOVERY.IMG"
Without the quotes replace C:\USERS\MYNAME\DESKTOP\ANDROID\ with the location where you extracted recovery.img.
Using Mobile
Simple Method.
Just install the TACK Manager from here and install the recovery .Enjoy .
Not so simple method
Download the flashable recoveries from Below and flash it through CWM Or TWRP [Yes, you need custom recovery for this to flash]
Click to expand...
Click to collapse
Rooting Your Device
Method 1: Through CWM/TWRP
1) Download the SuperSU package provided below.
2) Copy it to the root of your SDCard
3) Select Install zip from SDCard
Method 2:Through Framaroot
Personally I Did not get any success by this method.But lot of users reported it to to work by using the Gandalf exploit.
Also some versions of framaroot work better on some devices as compared to others.So maybe just have to check which version works for our Mobile.
1) Download and install Framaroot.apk
2) On the exploits list select Gandalf
3) It'll probably crash the first time and apparently work the second time you launch it.
As I Am not sure which version of framaroot works for this mobile hence no upload
Click to expand...
Click to collapse
Reserved
Flashing Roms and Fix Soft brick
1) Copy Rom to SDCard
2) Boot into Recovery by Powering on while holding power and vol+ Button.Initially you'll see a green screen...Keep holding untill the screen turns red.
3) Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
4) Goto Advanced and format Dalvik Cache
5) Select Apply Zip from SD Card
6) Select zip file of rom to install and wait.
7) Reboot and voila.
Note:This is assuming you are using CWMR
Note: Do not format /SYS_BOOT Partition.You'll end up bricking your device and then will not be able to boot into Fastboot mode.
If this happens by mistake.Follow the next Guide.
Click to expand...
Click to collapse
Fixing RESET FOR ENTRY QPST DOWNLOAD
In case you end up Formatting /SYS_BOOT Partition then you'll most likely end up in this.There might be few other cases when this can happen but none that i am aware of.
If you Have a Linux Desktop
If you have access to Linux PC then connect your mobile to it and mount the partition which is around 50 MB. Download the Images.zip from below.unzip the file and copy the whole folder to the 50 MB partition.
Your File structure should look something like this
-\50MBPartition
-\image
-\AMSS.MBN
-\AMSSHD.MBN​
If you have Windows
http://www.filefactory.com/file/2n5ygdzybijv
I'll soon put up a guide for windows users.
This is the guide I found on facebook's CM Flame 2.0 group.
DISCLAIMER:
This fix worked for me. I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE, YOU DO THIS AT YOUR OWN RISK!!! Please do the process step-by-step. DON'T SKIP any step as I don't know what will happen and there's a possibilty that your phone will be dead permanently.
TOOLS NEEDED:
Roadkill and StockROM
DOWNLOAD STEPS:
1. Go to www.dropbox.com
2. SIGN-IN using MY credentials
E-mail: [email protected]
Password: dropbox-pemaustria
3. Navigate to the folder cmflame2, there you can find the file.
4. Right click cmflame2stock.zipx, and click download.
(THIS STEPS LEAVE ME NO CHOICE BUT TO GIVE MY DROPBOX ACCOUNT TO YOU. AS A RESPECT, PLEASE DO NOT CHANGE ANY ACCOUNTS AND SECURITY SETTINGS ON MY PROFILE. THANK YOU)
NOTE: Please use WinZip for extracting files. Thanks
TUTORIALS:
1. Disconnect all USB drives especially flash drives, including memory cards.
2. Turn on your device to QPST Mode, and connect it to computer. When a window prompt you to format card. CANCEL.
3. Extract the contents of cmflame2stock.zipx and run Roadkill.exe. Click 'Yes' if administrative privilages prompt you.
4. In the left side of 'Write image to' choose PHYSICAL DISK 1(3.61GB). In my case it is 3.61 GB. Your size must be approximately 4GB. CHOOSE THE RIGHT DISK. CHOOSING THE WRONG DISK WILL RESULT DAMAGE to the selected disk.
5. In your extracted folder, you will see an image file named CM-Flame2.0-StockROM.img.
6. On source file, browse for the image file you just extracted.
7. Click 'START', wait for the process until it's finished.
Click to expand...
Click to collapse
Custom ROM's
Stock Rom
Karbonn Titanium S1
Flashable ZIP
CWM Backup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cherry Mobile Flame 2.0
Flashable ZIP
K-Touch Hornet U86 Kiss
K-Touch 1.3.4 Rom
Archos 45 Platinum
Archos 45 CWM Backup
Click to expand...
Click to collapse
Custom ROMS
LeWa OS 14.05.16
Download
One of the most stable ROMs I've seen for our device.It is Continiuosly developed and supported at Lewatek and has weekly updates at friday.OTA update are available so you don't have to download the whole ROM
MIUI ROM 4.1.17
Highly Customizable ROM.
MIUI Is known for the amount of customization you can do with it.From Statusbar to Lockscreen to everything normal android OS can do.
MIUI ROM Download
Lenovo Magic 4.0
With Support for over 11 Languages and
Download
CM10.1
CM10.1 Base ROM
Update File
CM10.2 Alpha
CM10.2 ROM
CM11 Alpha 3
CM11 ROM
Nokia X ROM Port
This ROM is ported by our friend rdis.
You can find the ROM here
AOSP KitkatFlare
More like Stock ROM with KitKat touch in it.Cooler and more Powerful
This is a KitKat Look alike and not the actual kitkat. For KitKat Check CM11 Above.
AOSP KitKatFlare
IXYNOS
Based on stock
Fully themed with color combination of cyan, yellow, purple and white
Slim rom around 189 Mb
init.d tweaks
build.prop tweaks
ttpod
mifileexplorer
pre rooted
zipaligned
net speed in status bar
good battery life
extremely smooth high performance rom
camera with smile detection
Ixynos ROM
Xperia Z
Xperia Z Download
Click to expand...
Click to collapse
Reserved
Reserved
Thanks idrogon81
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
sunilneelam said:
Framarook-1.7.0.apk works fine to root karbonn s1 titanium without any crash. use gandalf exploit and its done.
Click to expand...
Click to collapse
That's strange :/
Didnt work for me
Any Cynogenmod roms
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
LOLya said:
I loved Cynogenmod and I also want it to be on my device
Any help will be appreciated
Click to expand...
Click to collapse
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
TY
idragon81 said:
There is CM10.1 for Our device. However i didnt find it to be stable.Didn't find ways to connect to data and some people had issues with microphone not working.
I'll be uploading more unbrick solutuions first, followed by MIUI rom and then CM10.1
Click to expand...
Click to collapse
If uget it bugfree plz upload it
Thanks
English TWRP
idragon81 said:
Hello Everybody!!
Recently when going through the xda forums for the devices Karbonn Titanium S1, Cherry Mobile Flame 2.0, K-Touch Hornet u86 kiss [Hence reffered to as TCK-SU186, Simply because it is easier to refer to ], I noticed that a lot of people have questions regarding Stock rom, Recovery rooting and Solutions for Brick.However most of the posts have been left unanswered or died for some reason.
Hence I decided to open a thread that can be used to solve general problems and issues regarding the Device.
Stock Rom
​
Custom Recovery
​
Rooting Method
​
Click to expand...
Click to collapse
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Hi,
Great to read that.. at least after crawling the web and finding that Karbon S5 is equivalent to Archos 50 Platinum.. I find from the specs that this Karbonn S1 is the same as the Archos 45 Platinum that I own.
Specs are : here for the Archos 45..
http://www.archos.com/gb/products/smartphones/platinum/archos_45platinum/specs.html?#a
Finally.. I can't wait to see Cyanogen on it.. maybe a chance to have a CM11 ?
Regards
at last i could successfully port android 4.2.2 to karbonn titanium s1...
the rom is being uploaded...its named as "CHEEKUMOD" as it is edited by me
whats working:
ALMOST EVERYTHING :fingers-crossed:
whats NOT working:
CAMERA FOCUS
REST ALL ITS JUST FINE AND AWESOME !!
see the screen shots mean while
Karbonn Titanium S1 custom rom
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
========================================================================================================
Whats WORKING:
VERSION 1
ALMOST EVERYTHING
VERSION 2
ALMOST EVERYTHING
========================================================================================================
Whats NOT WORKING:
VERSION 1
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
VERSION 2
CAMERA FOCUS
Will give the fix soon,or someone please help me out to fix it...
========================================================================================================
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
VERSION 1:
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
========================================================================================================
DOWNLOAD THE VERSION 2 OF MY ROM HERE WITH MIC FIX AND GAPPS !!
IMPORTANT !!!!!!!!!!!!!!!!!!!!!!! <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
DO NOT FLASH GAPPS WITH THIS VERSION OF MY ROM IT IS PRE INSTALLED IN THE ROM...!!
VERSION 2:
ROM DOWNLOAD: https://drive.google.com/file/d/0Bz2-ARVuWcM9SUVkUnJSSnV3WEU/edit?usp=sharing
GAPPS DOWNLOAD: ITS PRE INSTALLED IN THE ROM DO NOT FLASH AGAIN !! < < < < < < < < < < < < < < < < <---------------------NOTE
Changelog:
1:Fixed "Mic not working in call".
2:have added gapps in the rom file to minimize flashing procedure of flashing each at a time.
========================================================================================================
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
pls..
idragon81 said:
Flashing Roms and Fix Soft brick
Fixing RESET FOR ENTRY QPST DOWNLOAD
Click to expand...
Click to collapse
Pls.. post a guide for windows users.thanks
CWM is the solution
claymisteryo said:
Pls.. post a guide for windows users.thanks
Click to expand...
Click to collapse
Its not necessary to flash or reset the soft brick using any OS,
U can do it by CWM also.
1]For softbrick u can just factory reset and wipe cache
2] for flashing u can mount and remount sdcard and copy the .zip file to it and choose install zip from sdcard
Plz accept my request
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Click to expand...
Click to collapse
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
LOLya said:
Hey Cheetan I just requested u for rom from the link plz accept it I want to try it
Click to expand...
Click to collapse
me too not able to download
Mincrophone not working!!
when you call, the other person cannot hear your voice.... plz fix this!
its quite a major BUG!
Original Site
chetan007cheeku said:
VOILA !!
At last the first custom rom for Karbonn Titanium S1 is here !!
the most waited Android 4.2.2 for Karbonn Titanium S1
Custom DPI for better looks...
Whats WORKING:
ALMOST EVERYTHING
Whats NOT WORKING:
CAMERA FOCUS
SOMETIMES MICROPHONE IN CALL WONT WORK !!
Will give the fix soon,or someone please help me out to fix it...
HOW TO INSTALL THE ROM:
Download the rom and gapps and place it in the root of the SD card (Root meaning directly in ur SD card and not in folders so u can find it easily in the recovery)
ROM DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9ZjNvNkJTLWZidnM/edit?usp=sharing
Gapps DOWNLOAD: drive.google.com/file/d/0Bz2-ARVuWcM9LW5TV2xMS2cydnc/edit?usp=sharing
INSTALL CLOCKWORKMOD
How to install clockwork mod for newbies (IF U HAVE CWM ALREADY INSTALLED U CAN SKIP THIS)
Things required:-
Recovery.img (Find in attachments below)
AIO flasher (Find in attachments below)
And of-course ur phone and USB cable
1.Switch off your phone.
2.Boot into fastboot (to boot into fastboot hold volume up+power button for few seconds untill u see a whole green screen and release both the buttons)
3.plug in your phone to pc via USB cable.
4.Download the AIO flasher from attachment below,extract it and open it (Run as admin in pc if required).
5.Select recovery in the AIO flasher and click on select file and select the recovery.img which u downloaded from the attachments below.
6.Now check the erase option and click on flash and wait till it reads "finished" in the AIO flasher dialog box.
7.Remove the cable and pull the battery and re insert it to exit fastboot.
Congratulations !! You have successfully installed CWM on ur device.
BOOT INTO RECOVERY MODE
To boot into recovery mode u need to hold the volume up+power buttons untill the screen turns green and do not release the buttons now hold untill the screen turns red and release the buttons.Wait for sometime untill it boots into the recovery.
navigate using the volume keys and select using the power keys.
1.Select Wipe data/factory reset.
2.Navigate to Advanced and select it.
3.Wipe dalvik cache and go back to main.
4.Now select install zip from sd card.
5.Now select choose zip from sdcard.
6.Select the rom which u downloaded and copied to the root of the SD card.
7.And select yes.
8.Wait until it reads installation complete.
9.And using the same method from step.4 also install the gapps. to flash Gapps u need to select the gapps file instead of rom file.
NOW reboot and enjoy !! IF IT DOSENT REBOOT DONT PANIC PULL THE BATTERY AND POWER ON MANUALLY
Congratulations !!
Your device is running Android 4.2.2 now.
And if u liked this please +1 this
DISCLAIMER:
NOTHING WILL GO WRONG NORMALLY BECAUSE I HAVE TESTED THESE PERSONALLY BUT IF IT HAPPENS TO U I AM NOT RESPONSIBLE..!!
HAVE A BACKUP OF UR DEVICE so if something goes wrong u can revert the phone to the earlier working stage.
I AM NOT RESPONSIBLE FOR BRICKING OF YOUR PHONES DUE TO THIS PROCEDURE DO IT AT YOUR OWN RISK !!
Click to expand...
Click to collapse
Actually Cheetan this is the site with the same ROM,no offence.You might have modified much in this ROM(Your ROM(Cheeku ROM))
Site: http://www.needrom.com/mobile/k-touch-u86-7
Problem is u just need to make account
LOLya said:
The TWRP is in Japanese Language can u upload english twrp.img
I googled for it but did'nt get it
Click to expand...
Click to collapse
can i use any twrp version instead?

how to backup my current room with my settings

hey all
now I have my sony xperia M dual sim ( c2005)
I was flash my device with Cynogenmod 13 :good:
and flash google gap :good:
and dual sim fix patch to active network service :good:.
And for now i customized my settings like make the clock at status bar in left
, pin some icons to desktop, set wallpaper, setup apps and so on.
now i need to merge all that as backup all my this settings and the current room to my pc as Room TFT file
( just in case i facing any problem .. flash this room by flashtool .. and enjoy my room i custom it again )
please help me if this can
You can backup it via recovery
Recovery can backup whole system + your data and no need to use flashtool for restoration
thank's
Ricky Hatton said:
You can backup it via recovery
Recovery can backup whole system + your data and no need to use flashtool for restoration
Click to expand...
Click to collapse
thank you for response but i need to know step by step
MedoEgypt said:
thank you for response but i need to know step by step
Click to expand...
Click to collapse
Reboot your device, when led blink press volume down, it will enter to TWRP recovery (if still in cm recovery press reboot > reboot to recovery), choose backup, choose location backup to sdcard, then backup all
Don't have TWRP? Install from app
http://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager > install TWRP > choose device nicky > tap install > wait process done
good
Thank you ricky It's worked ..

Categories

Resources