Related
Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?
chillout23 said:
Is there any way to get Reboot option in rooted stock 2.2? I can't find any app for reboot...
Or it's possible just in custom ROMs?
Click to expand...
Click to collapse
opet ti
since u have a sense ROM , check this link
Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate
chillout23 said:
Thank u but it's complicated to me at the moment...i am newbee and don't understand everything yet
Thanks a lot mate
Click to expand...
Click to collapse
how to install:
* please make sure your device/setup meets the requirements above
* check your framework build number (settings >> about phone >> software information >> build number)
* download the archive that matches your build number
* copy it to your sdcard and flash it in recovery mode (as always, it is advisable to do a nandroid backup prior flashing)
check your framework build number, download the .zip that matches ur build number, copy the file to microsd, enter recovery (turn off device then press power + vol down and keep holding till u get the white screen) , use vol up/down to navigate to then press power button to enter Recovery , in recovery u navigate using the trackball, there u chose flash .zip file from sd card, u chose the file u want (the one u downloaded and copied to the card) and that's it
Ok...i'll try it when i'll be back from my job...
thanks again and again...and again
So...I found app on Applanet HOT REBOOT App works like a charm
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
test it and reply the queries
Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,
srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm
Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not
Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7
Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS
some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?
Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there
I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)
Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.
ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation
i like your rom
i like your rom and i'm waiting for your next rom~
Hi
So yesterday I was trying to install TWRP recovery in order to install Cyanogenmod 11 on Xperia S , I followed a tutorial on techglen, the problem is that now I only have the recovery on my phone , it boots instead of the system , the system files are still there but I can't boot on it , If i connect my phone to my computer I can't access the storage even if I mount it using TWRP
So i have some questions
Is my phone broken?
Instead of flashing a .elf file i flashed the .img instead , is that the source of the problem? ( i didn't do it on purpose , but i didn't pay attention :/ )
can i flash the boot.img of the old system to get it back on booting ?
If there's a way of pushing the CM11 into my phone and installing it would that fix my problem?
Can i use flash tool to flash my old system back ?
Hi,
do you have the zip file of your custom rom on internal stockage ?
(browse file with 'Install" on TWPR)
If yes, you just have to flash it with TWPR.
Here's what I did (will do a clean install and delete previous setting, contact, app data ...) :
- Download ROM + Gapps and copy to sdcard (internal stockage)
- Flash boot.img with FlashTool
- Reboot on recovery (TWPR)
- Factory Reset (Wipe --> "Switch to Factory Reset")
- Format System (Wipe --> Advanced Wipe --> Select System)
- Install New ROM (Install and choose Zip)
- Reboot on ROM to set basic settings
- Reboot on recovery to Flash Gapps
- Wipe Cache (Wipe --> Advanced Wipe --> Select Cache)
- Reboot on System
If you don't have zip file on internal stockage, you may go back first on Stock Rom with FlashTool.
Flash stock ftf(6.2.b.1.96), you can easily find it using search function.
Then you can do like I explained.
jeremux said:
Hi,
If you don't have zip file on internal stockage, you may go back first on Stock Rom with FlashTool.
Flash stock ftf(6.2.b.1.96), you can easily find it using search function.
Then you can do like I explained.
Click to expand...
Click to collapse
Well thanks a lot for your answer man !
when i put on flash mode and try to flash it with flashtool , the phone leaves flash mode after like 40 seconds
I tried installing the drivers ( from flashtool/drivers ) but it didn't change anything :/
Do not confused Fastboot and Flashmode.
Normaly you just have to :
(I guess your tft is already in "firmwares" folder of FlashTool)
- start FlashTool (with Administrator Rights on Windows)
- clic on "Flash device"
- select "Flashmode"
- select all file in "Content"
- clic on "Flash"
- your xperia s must be poweroff and unpluged
- Press the back button (still powered off)
- Then plug the USB cable
After that your phone boot in Flashmode and flashing start.
If they don't work, what is the error ?
ImSoFresh said:
Well thanks a lot for your answer man !
when i put on flash mode and try to flash it with flashtool , the phone leaves flash mode after like 40 seconds
I tried installing the drivers ( from flashtool/drivers ) but it didn't change anything :/
Click to expand...
Click to collapse
Don't put your device on flashmode until flashtool tell you because flashtool takes about 1 minute and 20 seconds to finish extract ftf file
Sent from my LT26ii using XDA Premium 4 mobile app
ImSoFresh said:
Hi
So yesterday I was trying to install TWRP recovery in order to install Cyanogenmod 11 on Xperia S , I followed a tutorial on techglen, the problem is that now I only have the recovery on my phone , it boots instead of the system , the system files are still there but I can't boot on it , If i connect my phone to my computer I can't access the storage even if I mount it using TWRP
So i have some questions
Is my phone broken?
Instead of flashing a .elf file i flashed the .img instead , is that the source of the problem? ( i didn't do it on purpose , but i didn't pay attention :/ )
can i flash the boot.img of the old system to get it back on booting ?
If there's a way of pushing the CM11 into my phone and installing it would that fix my problem?
Can i use flash tool to flash my old system back ?
Click to expand...
Click to collapse
You can simply try pushing the CM11 zip to Your phone when You are in twrp and Your phone is detected on the PC. You won't be able to see it as mounted storage. You will see the device when You run:
Code:
adb devices
Then Use the command to push:
Code:
adb push path/to/rom /sdcard
And then flash the ROM.
Mirhawk said:
You can simply try pushing the CM11 zip to Your phone when You are in twrp and Your phone is detected on the PC. You won't be able to see it as mounted storage. You will see the device when You run:
Code:
adb devices
Then Use the command to push:
Code:
adb push path/to/rom /sdcard
And then flash the ROM.
Click to expand...
Click to collapse
That's exactly what i did , but it still didn't work , i flashed the recovery.elf ( at first i flashed it .img ) and then installed the rom , now it works perfect , thanks a lot guys for your help , if some people are having trouble this video helped me a lot
youtube.com/watch?v=Hn4E3fKX7WM
Hi,
Good news if it works now.
So enjoy yourself with custom rom
First of all i would like to thank ->Tsing Yi qingyi @http://weibo.com/1048297887 for his effort to make this possible!!
As some fellas request....I'm Just giving a detailed guide for the process to have Dual-System{Dual_Boot} in our little dragon @rmani :laugh:
DOWNLOADS:
1.HM1S-Sysrec.zip: http://pan.baidu.com/s/1jGzfP3o
2.M1S-System-Menu1.3-test.zip: http://pan.baidu.com/s/1qWDN5u8
if want it in a simpler way download 3
3.Mokke + Miui.zip: http://pan.baidu.com/s/1sjCyI3z
:good: @bhushan2k
MIRROR Link: https://drive.google.com/folderview...NrYmkzLTN3WmlONEczVnlzajg0emo3ZHM&usp=sharing
WARNING!! : Installation of Dual System is Complecated, include data loss and may brick your devices and i'm not responsible for any kind of Loss or Failure..!!
CAUTION!! : During this Process, Your Phone gets Factory Reset and all internal memory gets wiped!! Make a Backup of all internal data as well as a nandroid to extrnal sd!!
***//For Users coming from MIUI rom and want to have MIUI on one of the Systems continue from step 1-2 and read NOTE and in step 3 tick the checkbox promting special!
STEP1:
Flash HM 1S-Sysrec.zip...[after flashing, recovery gets rebooted].......In this Process Phones Intrernal Memory gets formatted and current ROM gets Factory Reset!
STEP2:
Flash HM 1S-System-Menu1.3-test.zip...Select English->Press Next->Accept and Press Next->Enter the function->Install and uninstall->Install the dual system.....This installs Dual-System and gets rebooted to recovery, meaning dual system got installed!!
**NOTE 1 : If you wish to install mokee+MIUI which was provided #3 in download section.....You can flash that mokee+MIUI.zip here, without proceeding further...and reboot!!
**NOTE 2 : Now we have two System partitions installed and we are on system1, which already have the previous Rom residual and System2 is Void!!
**NOTE 3 : If you want to have a fresh Installation of AOSP Rom on System1, you can directly flash a AOSP rom of your choice! or continue with previous rom!
STEP3:
Now that we have a Rom in System1 [MIUI or a AOSP]....so we need to install system switching software in it....
Flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System I-> Next [check special for MIUI users]...and reboot system!!
STEP4:
After the completion of boot process you will see a system changing app....open the app ->give root permissions and the phone gets rebooted and gets stuck at mi logo indicating we are in System2....Now Enter Reovery (Powr+VolUp same time)
STEP5:
Flash a ROM of your choice...."and dont reboot!"....after flashing rom again flash HM 1S-System-Menu1.3-test.zip, Follow the prompts to enter the main menu -> enter the function -> Install switching software -> System 2-> Next....now reboot !!!.. which will take you to ROM installed in System 2 ....
STEP6:
After the completion of boot process, now that you are in System2, will see a system changing app as well ....open the app ->give root permissions and you will be able to switch to the other system/ROM........
////**Manual System switching process: **///
Flash HM 1S-System-Menu1.3-test.zip Follow the prompts to enter the main menu -> enter the function ->System Switching -> and select a System of your choice and proceed and Finally reboot !!!
***///Wanna change rom or try a new ROM keeping the other still///***
Stay on the System on which you want to try a new ROM....Reboot to recovery...
Flash HM 1S-System-Menu-Test1.3.zip and Follow the prompts to enter the main menu -> enter the function ->clear data->
Continuing which will wipes and factory Resets the current Rom....After proceeding further enter RECOVERY....
and Flash the ROM u wanna Try...and repeat #STEP5 and install switching software on new system!!(Hope U Understand)!!!
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
...for further questions comment below...............Give :good: if useful!!!....
Happy Flashing!!!
If anything Goes wrong...How to revert Back ?
Sent From My Redmi
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
can we use rom??and can i install custom kernel for both roms??
as9333 said:
1.Does we need to follow a unbrick tutorial
To revert back OR just restore a backup
2.Should we install twrp and continue or
Continue with philz recovery
3. Can we access system partition of system 2 from system 1 and vise versa
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
For reverting back...we need to flash Sysrec.zip once again and flash Sysmenu.zip and follow uninstall procedure...then everything will be normal...
2.cwm or twrp...u can try philz.. Dunno..
3.We can browse sys2 directories from sys1 & vice versa
how can i restore my data on my first rom? help me plz
chauhansonu104 said:
how can i restore my data on my first rom? help me plz
Click to expand...
Click to collapse
I don't think restoring nandroid data will work... Because....as u can see there are two two folders inside root/data/.......by restoring data from recovery will first wipes current root/data content and writes content from backup....so no dual-system!!! Hope you understand....tell me whether u have installed dual system? If so once see inside root/data /....u will get it!
sathyakaushik4 said:
can we use rom??and can i install custom kernel for both roms??
Click to expand...
Click to collapse
We can install gapps for system1 and system 2 separately....and can install custom kernels as well...!
very good tutorial.. thnx for this.. I tried on my own and couldnt manage.. will try again this time following ur simple steps..
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Great, Thanks for info, will try after my exams, one again Thank You Very Much.
@as9333
i guess we can switch between system 1 & 2 from recovery itself.. just flash the zip and explore through its aroma installer and see theres that option to switch...
as9333 said:
Just a doubt if we install cm r18 and PAC ROM with custom kernel can we install kernel patch for both the ROMs
Will cm work
Can we boot into sys 2 within recovery
If sys 1 got bootloop
Sent from my Redmi 1S using XDA Free mobile app
Click to expand...
Click to collapse
Note 1: Two Roms will be installed with two separate system partitions....all u can do things like installing custom add-ons or patches either being on system1 or system 2..use switching software to switch between system partition 1or 2...
Note 2: U can switch to system of ur choice from recovery...by flashing HM1s-system-menu.zip...there u will c an option to switch system...hope u understand if u had read the procedure with a bit of pathence!
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
N-Gavin said:
Thanx alot bro! now im running miui 6 and carbon rc6..
a small doubt.. in the dual boot system menu there are 2 options saying system change(install systemchange and direc system change or sumthing) whats the second one? what will it do?
Click to expand...
Click to collapse
Read note2 of the above replied post...ur doubt will be clarified!!
bhushan2k said:
had hard time downloading from chinese server... here is gdrive mirror link @pawanzZ
Click to expand...
Click to collapse
Mk+miui is not mandatory to download!!!.... Remaining 2 are <30mb...any ways u made it easy ...tnx for mirror!!
internal storage
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Hsmetric181 said:
Thnx for the great tutorial
but i still have few question
First ,do external storage also wipe out?
Second ,are app installed in each rom are shared among them,includin data?
Click to expand...
Click to collapse
figured it out myself,for everybody else
won't format external sd card
and apps will be installed separately
Maybe some mistakes in step 2. The dev recommended unmount system, data and cache before installed Dual-System (doesn't matter really). Some user may need install it twice to success for unknown factors. And as I know on earlier versions, after you installed Dual-System, both partitions are empty. You need to flash a rom to system 1. But I haven't try v1.3 yet so I don't know if anything changed.
The tutorial seems so long but it's very reasonable to proceed.
1. (unnecessary for the 1st time) recover your phone's status - flash sysrec.zip
2. install the dual-boot system - flash into aroma and choose the option
3. flash a rom to current (1st) system - flash it in recovery
4. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
5. switch to system2 - switch directly in the aroma, or [ boot your phone to use the switcher app (after that plz press vol+ to enter recovery because system2 is empty now)]
6. flash another rom to current (2nd) system - just flash it in recovery, it will be in system2
7. (optional but recommended) install a switcher in the rom - install it in the aroma, caution the options, don't choose the wrong system
now you have dual system installed.
For changing between systems, use the switcher (if installed) or change in the aroma installer.
For replacing a rom, switch to the rom you unwanted, and reboot to recovery and flash the new one.
For clear data, don't use recovery,it will clear both. Use the aroma (change to the system you want to clear data and choose clear current).
For miui user, special for miui is actually for miui 6 because /system/app can't get root permission in miui 6.
For uninstall, do it in aroma and then flash sysrec.zip
@pawanzZ
I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work
and 4G, and sdcard1...
vmlc said:
I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work
Click to expand...
Click to collapse
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users
fastbooking said:
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users
Click to expand...
Click to collapse
so, you confirm no 4g and camera working?
vmlc said:
so, you confirm no 4g and camera working?
Click to expand...
Click to collapse
yes no camera and 3G/4G
fastbooking said:
yes no camera and 3G/4G
Click to expand...
Click to collapse
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....
vmlc said:
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....
Click to expand...
Click to collapse
I will try tomorow there's a french tutorial about that here's the link for the one's who speak french
phonandroid.com/forum/post1800321.html (www . before its just because i can't now)
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
ok, the part I dont get is: "once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot"
how do you do this?
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
I don't install cyanogen like that,
First I update my phone with EMMA with the Open devices TA
-After I open the zip of the rom and i extract it somewhere you can find it
-take the zip AND THE GAPPS and connect your phone on usb for sending the zip on THE ROOT of your sdcard
-Enter in fastboot, and open flashtool (not emma the other)
-Flash the kernel called : boot.img
-Once Flashed reboot your phone in recovery (up button when the led is purple or violet)
-The led became gold color
- You now are (normaly) in cyanogen recovery
-Wipe data/Factory reset
-Wipe Cache for avoid bugs
-Now the fun part
-Apply update select the ROM and after the GAPPS
-Reboot and enjoy !
If the screen is black for a while after boot it's normal it's the system update
I also recommand you to take the
FXP-cm-12-20150412-UNOFFICIAL-seagull.zip
file because the other in cm12.1 are bootlooping
Now you can enjoy properly without camera and 3G/4G cyanogen
Sorry for my english I'm just a 14 french kid
btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?
vmlc said:
btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?
Click to expand...
Click to collapse
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:
fastbooking said:
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:
Click to expand...
Click to collapse
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...
vmlc said:
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...
Click to expand...
Click to collapse
Ok let's start off zero
you installed the zip via the philz recovery and after you wanted to flash the kernel ?
dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
thats what it says...
vmlc said:
thats what it says...
Click to expand...
Click to collapse
follow my tutorial it's the steps i followed and it works for me :good:
fastbooking said:
follow my tutorial it's the steps i followed and it works for me :good:
Click to expand...
Click to collapse
I got bricked meanwhile. Battery problem I think, not the first time...
ok, i think there is a missunderstanding.
in order to flash the kernel, you need to be in fastboot mode (with the blue light). so, once you have installed the zip file, shut down the phone (in recovery mode, select "power options/power off" , disconnect the phone and reconnect it in fastboot (maintain the vol up before and during the USB connection ).
you can now use "flashtool" (the Androxyde's one. to avoid confusion, the Sony's one is called EMMA or if it is more easy for you fastboot.exe
to use fastboot, you open a command line (Windows+R + type "cmd") , you go to the folder where the boot.img is and you enter the comand "fastboot flash boot boot.img". after ~2s the kernel is flashed, you can disconnect the phone and restart.
the first time, the boot time is about 5 min with a black screen after the animated screen, so wait a moment.
it's for that it's very important to have a well charged phone (min 40%) because the first start use a lot of battery, and you can't see anything.
I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...
vmlc said:
I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...
Click to expand...
Click to collapse
go on emma and select the android 4.4.4 update KK in the services line under open devices TA
It will restore the like the 1 st day but you will loose your data, but after you can install the philz recovery and restore the backup