Develop Bugs

Huawei Ascend P1/U9200 Root

This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Download Android SDK Tools from here and install the packages.
4) Plug your Ascend P1 to the PC.
5) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
6) Open "b113_b115-root_u9200---__[Nixing]" from your desktop.
7) Run "hwadb.exe".
8) Run "ubl.exe", click ROOT - this should root your device without restart and any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!

Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:

Recovery
lerso said:
Hi.
When i try run "Onekey_ROM_Ascendp1.exe" i got stuck on reboot stage. Telephone just show Huawei Ascend. BTW Win 7 can't find driver for Blaze. I tried reboot manually with pressed power+volum up keys and recover update.zip. But recovery cant pass signature verification. :crying:
Click to expand...
Click to collapse
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful

I am curious how you install some ROM as .zip file, when all original updates from Huawei have .app as extension.....

Nixing said:
This method is tested by me and it worked perfectly. With this guide you will be able to root your U9200 with b113 and b115(android 4.0 and 4.0.3).
I am not responsible for any data loss or bricked devices! You do it on your own risk!
1) Download this zip. The password is: ccc333
2) Extract the zip to your desktop.
3) Plug your Ascend P1 to the PC.
4) Make sure that USB Debugging is checked (Settings -> Developer options -> USB debugging)!
5) Run "hwadb.exe".
6) Run "ubl.exe" - this should root your device without any problem, check if the Superuser icon has appeared.
After the device is rooted you will need to install recovery.
I used Geno's Recovery - run "Onekey_ROM_Ascendp1.exe" from the zip and the tool will install it.
From this recovery you can flash whatever you want w/o any problems! It's a little bit sad that it is in chinese but oh well...
I will attach a picture of the same recovery but in english so you can see what you are actually doing.
Good luck!
Click to expand...
Click to collapse
In my case it after step 5) it works a little bit different.
When run "Onekey_ROM_Ascendp1.exe" and stuck on reboot stage (just show Huawei Ascend), then you must install a driver for Blaze device manually, you can choose the standard "Android Adapter ADB interface" for this (it works in my case), after intalling the driver Onekey_ROM will resume and install only the recovery image and you phone is showing the Chinese recovery menu choose your "update.zip" or "gapps-signed.zip" from SD-card and it wil be installed (update.zip means your desired firmware).
It seems that the firmware in the Onekey_ROM_Ascendp1 tool will not be placed on the SD-card but in Local Storage, so it will not be installed, therefor put the "gapps-signed.zip" or "update.zip" before flashing on the SD-card so you can select it in Chinese recovery.
I only installed the gapps with original firmware B115 on the phone and all gapps are working.
GRTZ DiMaC

Hi people,
I'm sorry for this little off topic but I don't know where to find other Huawei Ascend P1's users.
I would like to buy this device but before I would like to know if this device is going fine.
In particular way: how is the in call audio quality? Is it missing calls (like other Huawei device U8800 Pro)? How is the Network (GSM and/or UMTS-3G) quality?
Is the price balanced to the overall quality of the device? I just know that the Huawei Ascend P1 is able to record amazing video and the audio quality is really incredible, but the "phone" function, how is it?
Sorry for the off topic.
It's a great news that I can root the device, so probably at 99% I will buy it after reading your comments.
Thank you in advance,
regards,
kalo

Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.

Nixing said:
Hey, I'm very pleased with my U9200, don't know about the others but everything works fine here. The device's default ROM was working perfect, I managed to root it and eventually changed to MIUI ROM. But yeah, the U9200 is a really good smartphone if you ask me. There are still not enough apps and tweaks for it etc.
Click to expand...
Click to collapse
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.

Build B218
Hi,
i have the Build B218.
Has anyone rooting?

B218
arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Try Unlock Root here - Unlock Root 2.3.1 it says it can root the U9200 and might work for your firmware version.
You can also try the method for B113 and B115
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - Johnny Paranoia's Other Blog
or here
How to - Root Huawei Ascend P1 - U9200 B113 and B115 - MadModder
See if it works and post back to let everyone know
ljmchinastar said:
Hello brother , plz. update the file link it's not working . Thx for ur effort.much appreciate.
Regards.
Ljm.
Click to expand...
Click to collapse
The links to my sites above have links to the tools and the link to OneKey's rom is also there on the - How to Install Root and Recovery on Huawei U9200 - Ascend P1 post
I didn't mirror nixings full download without his permission, though I will if he would like me to (Although I would have to remove the password because I don't like them lol)
Hope this helps

The main link for "b113_b115-root_u9200---__[Nixing]" works as well now, thanks for all your PMs!

Download Mode
Hey,
is there any trick to get into Download Mode/Fastboot?
Should I press both at the same time? When do I release them..
With Vol. Down + Power Key i don't get into Download Mode..
I just managed to get there once, but I don't remenber how I did it.
And by the way. When I press Vol.Up und Power, I get to the android recovery, stock. where I can do a wipe or apply a update from sdcard.
Pease let me known
jensema
EDIT:
Got it. Hold VOL. Down and then Plug in USB Cable.
Phone in Download Mode.
Now I need the right drivers.
Phone shows a "Blaze"
Can someone tell me which driver to use.
thanks
2.EDIT: Got it. Under Win7 , installing Hi Suite, then change Driver for "Blaze" to Android ADB Interface.
Fastboot working!

arcelor said:
Hi,
i have the Build B218.
Has anyone rooting?
Click to expand...
Click to collapse
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema

b113_b115-root_u9200---__[Nixing] mirror
Nixing has given me permission to mirror his download so here it is - b113_b115-root_u9200--__[Nixing] mirror

jensema said:
Hey arcelor,
have you tried rooting Build B218?
I also have this Build, all I did so far is booting cwm_touch_recovery_viva_beta.img and making a backup.
jensema
Click to expand...
Click to collapse
Hi jensema,
root and recovery works with B218 !:good:
http://www.mediafire.com/?7pdfh11ue8ykyk6
http://madmodder.co.uk/huawei/u9200/how-to-root-huawei-ascend-p1-u9200.htm
http://www.android-hilfe.de/huawei-ascend-p1-p1-s-forum/275267-root-recovery.html
Arcelor

Has anyone updated with cwm-recovery on B219?
http://www.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDY0NjU=

WIND Mobile Huawei Ascend P1 (U9200)
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.

JohnnyParanoia said:
You can try this to install the recovery image onto the phone without the custom rom.
1. Download Android Control here (mirror) or here (XDA thread) and extract to a folder on your hard drive root (eg. c:\AndroidControl)
2. Download the Recovery image - recovery-new.img (the one included in Onekey) or recovery-off.img (the one that Onekey is based on)
Note: As far as I know, they are both Chinese language but based on ClockWorkMod so should be easy enough to navigate around. Edit: Though judging from the picture above then they may not be Chinese lol
3. Put whichever image you choose into the AndroidControl folder ready to be flashed over.
4. Make sure USB Debugging is enabled on your phone and then switch it off. Hold volume down and power key (I think lol) to boot into download mode (phone should boot to logo and then stop) then plug it into your PC.
5. Open a command prompt and navigate to your Android Control folder, run the following command -
fastboot flash recovery recovery-new.img
or
fastboot flash recovery recovery-off.img
depending which one you chose.
6. Once finished type - 'fastboot reboot' to reboot your phone.
7. Turn off your phone once rebooted and then hold the volume up and power keys to boot into recovery, if its in Chinese you've been successful
Click to expand...
Click to collapse
I want to install the new version B118
I can not update with the alternate recovery
How can I get back to the original recovery.img?

Safe to update Superuser?
I have also successfully rooted my Wind Mobile, build U9200-1V100R001CANC113B104. Just wondering if it's safe to update Superuser (update available through system updates).
djstyles97 said:
Just to confirm, I just tested the root method on a WIND Mobile Ascend P1 with U9200-1V100R001CANC113B100 and it rooted fine. I haven't tested the clockwork mod yet as there is no where to download this version of the stock rom.
Click to expand...
Click to collapse

Did not work on my Wind pentaband P1, the firmware version on mine is B105.

[CWM-Touch] Bootmenu for Defyxt-535

Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk

test it and reply the queries

Srika said:
test it and reply the queries
Click to expand...
Click to collapse
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Actually i have to try it on friends mobile., will reply aftr that !!!!.,

srijithn said:
Thanks.,
But do not create new threads., U could have updated your [bootmenu] thread, U have already established a set of followers over there !!!!
Click to expand...
Click to collapse
i have asked the mod to delete the thread as we have new cwm

Srika said:
Hi Guys
Here Is The CWM touch With Some Resolution Issues But With Brightness And Working Perfectly
First of all check out that you have all the things required :
1. A Motorola DefyXT535.
2. Must be rooted.
You would require some apps too:
1. Pimp My Rom
2. stericson Busybox
Here Is The Process
Open busybox and Install it.(smart install recommended)
Open Pimp my Rom and add Universal init.d support.
here is the process:
1)Download and Extract The Attached CWM_Touch.zip
2)Then conncet your device to pc select mass storage mode
3)Paste CWM Folder In Your Sdcard(make sure the CWM folder should be like this sdcard/CWM/bootmenu)
4)Then get out of usb storage mode connect device as camera(by dragging notification area u will see connected as select camera mode there)
5)Then press install bootmenu defyxt.bat
6)Follow the onscreen instructions
after seeing
^^^^^^^^^^^^^Made By [email protected]^^^^^^^^^^^^
Press any key to continue . . .
immediately remove the cable form pc
7)your system will be rebooted automatically don't panic
8)When System Is Rebooting And When You See MotorolaM Logo the soft buttons leds will light up.
Be quick enough to press the Volume down(-) button as you see the leds being lighted then You Will Enter Into Bootmenu
9)Then Select Recovery And Then Select Custom Recovery Finished
YOU ARE NOW IN ClockworkMod Recovery v6.0.3.1{Touch}
NJOY FRIENDS:good:
Note:i am not responsible for any damage to your device do it at your own risk
Click to expand...
Click to collapse
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...

Hiro27 said:
"(by dragging notification area u will see connected as select camera mode there)"
can't found this option on my xt535...
Click to expand...
Click to collapse
did you connect your phone to PC r not

Srika said:
did you connect your phone to PC r not
Click to expand...
Click to collapse
of course i did... i'm using stock Asia GB 2.3.7

Hiro27 said:
of course i did... i'm using stock Asia GB 2.3.7
Click to expand...
Click to collapse
hi but onething Touch CWM will not work with GB it only works with ICS

some issue
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?

k1000dubw said:
Hi,
i have some issue with it:
ont 4th step ( Then get out of usb storage mode connect device as camera...) when i do this, the installer can't see my device but if i leave the phone on mass storage it looks like to install the custom recovery. BUT i am not able to get into the recovery mod by pressing the - volume key.
Any idea where i made something wrong ?
Click to expand...
Click to collapse
when you connecting phone in camera mode just wait for some time till the phone drivers load then install the cwm try once

Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?

Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?

ferayn said:
Thanks for this.
But I can't flash it with your Paradox Ver 1.0.Why?
Click to expand...
Click to collapse
r u in stock ics? r what?

Hiro27 said:
Failed in my first experiment, i thought it's because i didn't remove it imediately after finished, was it?
Click to expand...
Click to collapse
m8 b chances r there

I've tried to install 3 times, and all failed. twice bootloop, once succeeded but can't enter recovery and suddenly blackscreen in normal boot.

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up

Why should it removed immediately? The one can't enter recovery mode and blackscreen in system boot, i thought it because the init.d support from Pimp my ROM (this time i use the beta release and i'm not sure with its init.d add options)

Srika said:
r u in stock ics? r what?
Click to expand...
Click to collapse
I have noticed that the notifylight doesn't blink when received a new sms.
Sorry I'm not allowed to reply in your rom thread in dev board now.

ferayn said:
No,I'm using your custom rom now.It succeeded in stock ics but failed in your rom.The cmd says OK,but the soft buttons leds don't light up
Click to expand...
Click to collapse
If u r using my custom rom then the leds will light in d middle of boot animation

i like your rom
i like your rom and i'm waiting for your next rom~

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509

100%&100% working ROOT TWRP Recovery & bootloop restart solution LeTV Le1s x507&x509
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507&x509 Indian Version
No more brick and bootloop problem
100%tested solution 8s&14s​
New Method added
18/05/2016
Backup all internal storage
install pdanet and preloder driver​https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/​
restart pc
Download new Rar file​https://drive.google.com/file/d/0B5KBP3GG99Q2aU1wNnYwakliUHM/view?usp=sharing?​Extract folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
how to unlock bootloder
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
how to install recovery
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
Remove usb cable
Most important
after flash userdata dont power on mobile
press volume up+power
first boot
leave both key showing letv logo
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Q.I completed the procedure as mentioned in tutorial, everything goes well even sptool download, but when I boot to recovery mode to install supersu the phone boots to stock recovery mode and not the twrp mode. Tried atlest ten times but same problem. How I can boot to twrp mode
Answer .after flash userdata dont power on mobile
press volume up+power first boot
leave both key showing letv logo
Video tutorial​​https://www.youtube.com/watch?v=v9X-a1DmU-g​

naeem210 said:
TWRP Recovery & root & bootloop restart
solution LeTV Le1s x507 Indian Version
No more brick and bootloop problem
100%tested solution
New Method added
24/04/2015
Twrp.3.0
Backup all internal storage
install pdanet and preloder driver
https://drive.google.com/file/d/0By_LtpUoEtFzUDNZLW9JeHhhNnc/view
http://pdanet.co/a/
Download new Twrp Rar file
https://drive.google.com/file/d/0B5KBP3GG99Q2NUpJSGVhWlB3X1E/view
Extract twrp folder Desktop
Go to mobile settings >> About Phone >>
tap Version 7 Times and hit back
U will have a new option just
above the About Phone option called Developer Options
open it and select USB Debugging
Connect the mobile with pc through USB cable
duble click recovery bat press any key to enter fastboot mode
After it Reboots
close cmd.exe
press shift+right click select open command windows here
Type fastboot oem unlock HIT ENTER
press volume up confirm NOW THE BOOTLOADER IS UNLOCKED
duble click recovery bat
press A key to Flash recovery img
again press a akey
switch off the mobile press 10 second power key
now mobile is boot loop
dont worry
open sp tool and flash user data
connect ur mobile Screen blank condition and wait for the process to finish
done
How To root
Start the mobile open twrp folder copy the Superuser.zip file to memory
Go to updater app and select reboot to recovery
select Install select superuser.zip swipe to install
done
Video tutorial
http://forum.le.com/in/index.php?th...-solution-letv-le1s-x507-new-method-add.1155/
Click to expand...
Click to collapse
Working!! Thanx

Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit

csifreeman said:
Hi , The Sp Tool does not show any progress at all.
I watched the video , connected the phone while it was blank , still SP tool remains stuck in Download forever and the phone keep looping.
Please help thanks
I tied in Windows 10 as well as Windows 7 64bit
Click to expand...
Click to collapse
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks

compatible with Le 1s Eco?
will this method work with LeEco Le 1s Eco version - Le X509 aswell?

Can u give me stock recovery.img please of le eco 1s x509

can install on x501?

strangely i didnt have to flash the user data..maybe because i am in official marshmallow rom

By unlocking bootloader waranty will void?

What is the new method?
csifreeman said:
Nevermind, I used the new method you posted , which was x509 and it worked.
Thanks
Click to expand...
Click to collapse
What is the new method? As my phone is bricked after I used thus now can't do anything, any advice please.

If any one have le 1s related problem and solution or any one want to try new rom or kernal asap then all of u are welcome in our group on telegram so plz join with us
Requriemt
1. Download telegram from play store
2. Just click below link
https://telegram.me/LeSuperGroup
Thanks all of u

otg support or not tell me fast ?????

Twrp
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?

Prabhmeet13 said:
How to install Twrp in letv le1s x507 Android 5.0.2 (Eui 5.5.008S?
Click to expand...
Click to collapse
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post

sumitgp said:
If u want to use custom ROM or Chinese version upgraded version of ROM then u have to upgrade you official ROM version from lollipop to marshmallow (eui 19s) if you don't want to do that and happy with lollipop ROM and stick with it then u have to install kingroot app for rooting mobile ROM
Then install twrp app or fleasify from ply store
Then download twrp version 2.8.6or7 or otherwise 3.0.2
Image file
If you use twrp official app then find with code name x3 (le 1s eco) then application demand u certain permission then do so rest app can do automatically
If u use fleashify then download official twrp image file rename it to recovery. Img. And place such file into ur SD card or internal storage openly (not put such file into any folder )
Rest process can do the app itsalf if you open the app just follow procedure as app demand u
If u have any problem in above process just search in you tube
You can find both app application process
Thanks for read out such long post
Click to expand...
Click to collapse
when i boot in recovery only show LETV logo and after automatically reboot phone normally i didn't see any recovery in my phone what can i do?

Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Sent from my Le X507 using Tapatalk

asif2017 said:
Im not able to flash user data.. actually i unlocked bootloader in my le1s and wen im clicking on boatloder option in twrp it shows device verification failed ur device might work impropely..not able to flash userdata in sp tool option kindly guide me
Click to expand...
Click to collapse
Bro just PM to naneem bro
Just go to 1st page of this trend and click on naeem profile u found PM tab

brom error s_brom_download_da_fail (2004)

nice

Kk

About using flash tool in my sony xperia m dual c2005

I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....

N RAM said:
I have some doubts about the using of flash tool.
1. Is it necessary to unlock the boatloader before flashing my phone?
2. Is it necessary to tick the usb debugging before using flash tool?
3. When i use flash tool, after some time it shows failed in my xperia m dual c2005. I am curious to know the reason behind it..
Any body please help me to clear my doubts....
Click to expand...
Click to collapse
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!

ojas12345 said:
Yes the bootloader obviously should be unlocked before you do the flashing stuff!Flashtool works for me and the state of usb debugging never affected its functionality ! Make sure you have all the drivers properly installed!
Click to expand...
Click to collapse
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:

N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!

ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....

N RAM said:
Thanks bro..:good:
Dude one more simple doubt. Is it possible for you to tell me how to install the drivers in my win 7?
Now I am facing another problem. I just tried to restore my xperia m dual c2005. But it didn't go well. I saw my xperia waves got stucked. So i just removed my battery an replaced it. When I switched on my phone it only shows SONY logo. I tried to repair my software by using PCC and Xperia Companion. It shows error messages. Then i showed it to a mobile service agent in a local mobile shop. He told me that m dual c2005 model had a sony only memory. So they cannot do it because the memory can't be re-writeted in this model. Is that true? Or is there any other better option to resolve my phone's issue?
Please help me bro....:crying:
Click to expand...
Click to collapse
N RAM said:
Thanks dude... Are you sure about this idea?
My phone is not an Indian phone. It is from Dubai. Will this country change damage my phone's main board when I boot it?
And some more doubts are remaining... May I please clear it with you....
Which will be the best flashtool?
Emma tool provided by Sony or flashtool-0.9.18.1 or flashtool-0.9.21.0
When do I need to connect my handset to the computer? Is it before when I go to cmd to type fastboot flash boot recovery.img ?
Whether I need to install flash tool before installing device drivers?
Please help me to clear all my doubts....
Click to expand...
Click to collapse
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
Most important : You need to connect your device in fastboot before installing drivers and flash the boot partition by those command so go here on how to boot in fastboot mode http://www.theandroidsoul.com/boot-sony-xperia-m-fastboot-mode-51835/
try and report ...
All the best:good:

ojas12345 said:
The country doesnt matter you may flash any country's generic rom,mine was indian but I flashed brazillian..
And about the flashtool I dont think emma is good , i prefer flashtool any version...if you find the latest not working then you may try the second latest but 99% it does work good..
try and report ...
All the best:good:
Click to expand...
Click to collapse
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...

N RAM said:
You are really awesome!!
For this do I need to unlock the bootloader?
Yeah. I will report about our experiment after trying it...:good:
Is it possible for me to relock bootloader? If yes, please explain me about that method...
Click to expand...
Click to collapse
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best

What will be the difference between the firmwares C2005_15.5.A.1.5_CE.ftf and C2005_15.5.A.1.5_DE.rar?
Which will be the best for me to download?

ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
Which is the best site for downloading latest firmware?

N RAM said:
Which is the best site for downloading latest firmware?
Click to expand...
Click to collapse
intead of flashing firmware ,it is better to flash a backup because , no chances of error
download the backup for your device from here and restore it via cwm based recovery like philz or cwm itselg
http://forum.xda-developers.com/showthread.php?t=2703161

ojas12345 said:
yes you will have to unlock bootloader and for that too i suggest you use flashtool because it does the work in seconds,!
and for relocking i dont there's any method to relock bootloader , u dont need to do that after all!
It enables you to flash modes and other cool stuff! even if you dont wanna do that then dont touch it !flash a cyanogenmod recovery,which is quite basic and wont modify anything that may harm your phone...
All the best
Click to expand...
Click to collapse
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...

N RAM said:
I tried to flash my xperia m dual c2005. Its only showing like the picture for long time.
what will be this? please reply me fast...
Click to expand...
Click to collapse
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!

ojas12345 said:
wait for some time i think it'll take time to do that or else flash a backup after flashing a cwm based recovery!
Click to expand...
Click to collapse
what is the meaning of that red writings?

N RAM said:
what is the meaning of that red writings?
Click to expand...
Click to collapse
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.

ojas12345 said:
I never faced that kind of a thing , make sure that you are flashing the right file!
You have unlocked your bootloader?
Again I say better flash a recovery then a backup ,its much easier.
Click to expand...
Click to collapse
My phone is only showing SONY logo. So is it possible for this recovery? If yes, please tell me the correct tutorial for that and if possible any video tutorial so that i can understand it correctly...

not working
ojas12345 said:
To Install the drivers
I think you might be able to solve this problem! The problem is with your partitions.So follow:
first of all install fastboot and adb drivers from: http://forum.xda-developers.com/showthread.php?p=48915118
go to device manager and verify that and android device interface or something like that appears.
If it doesnt then s1 boot device will appear as unknown device , right click on that and update device driver and then select the option let me pick from drivers on my computer .
After that select android device then dont select anything , itll get autoselected and click next!
now your device should appear in device manager!
To restore the system completely
Install a recovery for the device by the following procedure :
first download twrp from https://twrp.me/devices/sonyxperiam.html, rename it to recovery.img
go to cmd with admin rights in the folder in which recovery is put
(flash the recovery in boot sector)
type :
fastboot flash boot recovery.img
now boot the phone up the recovery should automatically open up, it may get stuck for some time but only once it will so be patient,;
go to wipe, then advanced wipe! select every option and micro sd,internal storage and usb-otg are optional
then swipe to wipe , it will show that it failed but dont worry some partitions are of sort that they show error now after this the problem should be resolved , after this flash a rom of your choice or restore a dual stock firmware backup (note: you cannot restore backups which were made from cwm , for that flash philz or cwm recovery)
Please report and hit thanks if i helped you!
Click to expand...
Click to collapse
i am getting this error :
C:\Fastboot\android-sdk-windows\tools>fastboot flash boot recovery.img
sending 'boot' (11208 KB)...
FAILED (status read failed (Too many links))
finished. total time: -0.000s

[Updated][How To] Backup Stock Rom Moto E(4) All Variants

About :​Backup your Moto E4's Official Stock ROM in scatter format.​
Requirement :​- A Moto E(4)
- USB Cable
- MT65xx USB VCOM DRIVERS http://www.devfiles.co/download/0InO9P5m/MT65xx_USB_VCOM_DRIVERS.zip
- MotorolaDeviceManager_2.5.4 Driver Software https://androidfilehost.com/?fid=24269982087012538
- Miracle Tool v2.27a + Loader.exe https://forum.hovatek.com/thread-15700.html​
Installing MT65xx USB VCOM Driver :​- Right click on the InstallDriver.exe
- Run as administrator
- On driver signature warning click OK
- Driver software installed Now​
Installing Device Driver :​- Install MotorolaDeviceManager 2.5.4 Driver Software​
Miracle Tool Forum :​- Download Mircale Tool + Loader
Thread Link : https://forum.hovatek.com/thread-13347.html​
Switch Off Device :​- Switch off your Moto E4
- Remove its battery​
Miracle Tool Stock Firmware Backup Procedure and Device Manager Hook :​- Unpack miracle 2.27A (dsmedia24)
- Run Miracle_Loader_2.27A.exe
- If Start button Faded & Non-working
- Close Miracle tool first
- Change your PC Date to 1 July 2016
- Now Again ! Run Miracle_Loader_2.27A.exe
- Within MTK Tab < Select Read
- Boot Selection Boot Select: 8TH Boot
- Tick/Check save as scatter file
- Leave Miracle Tool in This State
- Open Device Manager within control panel
- Resize the Device Manager Window
- Adjust both Miracle Tool and Device Manager window side by side
- Insert USB Cable at one end of the device
- Now insert another end of USB Cable in Desktop/Laptop USB Port
- As soon as you insert the USB Cable in USB Port ! Hit volume up button simultaneously
- Look at the Device Manager Window under COM & LPT
- You will see MTK USB PORT
- When COM & LPT option gone in Device Manager Window
- Suddenly Hit Start Button in Miracle Tool.
(If successfully done ! You will see charging LED but not charging at all)
- Now in miracle tool select all the files except CACHE & USERDATA
- Click on OK Button
- Select Path
- Do not interfere until backup job finish
- Done​
Guide For MOTO E(4) All Variants​Credits :​@havotek​

This even works on the Snapdragon E4's?

mendelgordon said:
This even works on the Snapdragon E4's?
Click to expand...
Click to collapse
you should give a try first.

kartik verma said:
you should give a try first.
Click to expand...
Click to collapse
I can't try anything since my original e4 had ghost touch issues, so I haven't unlocked the bootloader on my new one because I want to keep the warranty

mendelgordon said:
I can't try anything since my original e4 had ghost touch issues, so I haven't unlocked the bootloader on my new one because I want to keep the warranty
Click to expand...
Click to collapse
taking firmware backup doesn't void your device warranty. instead this process doesn't require rooting or unlocked bootloader :fingers-crossed:

isn't it possible to do a spflashtool readback if we have a scatter file ...
---------- Post added at 05:36 PM ---------- Previous post was at 05:27 PM ----------
My device ( woods)(E4) isn't using this chipset ? shouldn't we try to edit a scatter file from the correct chipset and pulling the block map from adb ?
I want to get a valid scatter to do a readback of an unpatched boot image and stock rom using spflashtools and then patching boot with magisk .
Then we could flash back to stock etc etc ...can any of you who rooted woods use terminal or adb and pull the correct mount points so we can create a scatter for the 2GB/16GB woods variant .

KevMetal said:
isn't it possible to do a spflashtool readback if we have a scatter file ...
---------- Post added at 05:36 PM ---------- Previous post was at 05:27 PM ----------
My device ( woods)(E4) isn't using this chipset ? shouldn't we try to edit a scatter file from the correct chipset and pulling the block map from adb ?
I want to get a valid scatter to do a readback of an unpatched boot image and stock rom using spflashtools and then patching boot with magisk .
Then we could flash back to stock etc etc ...can any of you who rooted woods use terminal or adb and pull the correct mount points so we can create a scatter for the 2GB/16GB woods variant .
Click to expand...
Click to collapse
@KevMetal
you can do this by following the main post
it's a miracle dump so obviously you can't make it spflash tool flashable. but our device have newer mtk chipset MT6737M and miracle tool isn't capable of flashing factory images to newer chipset you need a dongle to complete the flashing process. if we make this process more simple than you need to follow these simple steps.
dump firmware with miracle tool. its in .bin format change the extention to .img and this firmware is ready for flashing with fastboot tool.
do not flash these files in fastboot mode *pgpt.img* and "preloader.img*
if you still want to flash pgpt.img the correct way of flashing this file is "fastboot flash partition pgpt.img"

I am unable to backup using this guide as miracle tool fails to detect my phone. I followed the guide thoroughly but the tool shows "Waiting for USB Port..." two times and then "none usbport, maybe driver not installed". My phone shows white LED when I connect it as per instructions in OP.

gururoop said:
I am unable to backup using this guide as miracle tool fails to detect my phone. I followed the guide thoroughly but the tool shows "Waiting for USB Port..." two times and then "none usbport, maybe driver not installed". My phone shows white LED when I connect it as per instructions in OP.
Click to expand...
Click to collapse
Battery must be removed !! When doing backup through miracle.
You have to press vol. Down button multiple times when device is connected with laptop.

Francesco Franz said:
Battery must be removed !! When doing backup through miracle.
You have to press vol. Down button multiple times when device is connected with laptop.
Click to expand...
Click to collapse
I did remove the battery. Also, do you need to press the volume up button or down? I pressed the start button as soon as COM & LPT disappeared from Device Manager. I also tried to press the volume down button multiple times as instructed by you but still no success.

Can someone please share the stock backup of XT1760 taken using this method?

gururoop said:
Can someone please share the stock backup of XT1760 taken using this method?
Click to expand...
Click to collapse
why did you brick while flashing recovery ? didn't you make a backup before flashing ? either way since there are so many SKU versions it would be better to make your own backup .
if your phone isn't booting after twrp it is because you didn't flash the no dm-verity zip
if the one you got isn't working try the no dm-verity and good instructions for installing in my thread for SKU xt1762 ....
to reboot to recovery hold power and volume down ...you won't go directly to recovery but first to bootloader ...using the volume key "scroll" until you see it says recovery and select that option using power button
when in recovery flash no dm -verify zip
don't flash stock files from my post cos I think they might not be cross compatible between variants for stock only custom roms .
otherwise download a scatter file and stock rom from google and the interwebs and flash your phone using sp flashtools and scatter file .

KevMetal said:
why did you brick while flashing recovery ? didn't you make a backup before flashing ? either way since there are so many SKU versions it would be better to make your own backup .
if your phone isn't booting after twrp it is because you didn't flash the no dm-verity zip
if the one you got isn't working try the no dm-verity and good instructions for installing in my thread for SKU xt1762 ....
to reboot to recovery hold power and volume down ...you won't go directly to recovery but first to bootloader ...using the volume key "scroll" until you see it says recovery and select that option using power button
when in recovery flash no dm -verify zip
don't flash stock files from my post cos I think they might not be cross compatible between variants for stock only custom roms .
otherwise download a scatter file and stock rom from google and the interwebs and flash your phone using sp flashtools and scatter file .
Click to expand...
Click to collapse
No, I didn't brick my device. Actually, I wasn't able to backup my stock ROM using this guide, so I flashed TWRP and backed up my stock ROM using that. I just need stock backup so that I can go back to pure stock if required.

gururoop said:
No, I didn't brick my device. Actually, I wasn't able to backup my stock ROM using this guide, so I flashed TWRP and backed up my stock ROM using that. I just need stock backup so that I can go back to pure stock if required.
Click to expand...
Click to collapse
if you backed up using twrp why would you need pure stock ? there is very little chance you would need stock recovery and boot because you are way more likely to get Oreo via custom rom .....the backup you made in twrp is more than enough in my opinion ...anyways

KevMetal said:
if you backed up using twrp why would you need pure stock ? there is very little chance you would need stock recovery and boot because you are way more likely to get Oreo via custom rom .....the backup you made in twrp is more than enough in my opinion ...anyways
Click to expand...
Click to collapse
The main reason is stock recovery, even stock boot was backed up by TWRP. Stock phones get higher rates while reselling.

There is an OTA update notification in my XT1760 in India. Can anyone please share the stock recovery?

gururoop said:
There is an OTA update notification in my XT1760 in India. Can anyone please share the stock recovery?
Click to expand...
Click to collapse
Which patch?

gururoop said:
I did remove the battery. Also, do you need to press the volume up button or down? I pressed the start button as soon as COM & LPT disappeared from Device Manager. I also tried to press the volume down button multiple times as instructed by you but still no success.
Click to expand...
Click to collapse
@gururoop
Buddy here you done a small mistake. Also you don't bother to read whole thread in a respective manner just scrolling and scrolling. When COM & LPT disappear from device manager. You need to press start button in miracle tool not the vol. Down or up or power button any more. As present COM & LPT port disappears a new port has been established as soon as you press the start button in miracle tool. In first attempt COM &LPT contain MTK USB Port driver as soon as it's removed a new port appears, the actual driver software we need MTK Preloader usb com port#7. Hope you understand it very well

Francesco Franz said:
@gururoop
Buddy here you done a small mistake. Also you don't bother to read whole thread in a respective manner just scrolling and scrolling. When COM & LPT disappear from device manager. You need to press start button in miracle tool not the vol. Down or up or power button any more. As present COM & LPT port disappears a new port has been established as soon as you press the start button in miracle tool. In first attempt COM &LPT contain MTK USB Port driver as soon as it's removed a new port appears, the actual driver software we need MTK Preloader usb com port#7. Hope you understand it very well
Click to expand...
Click to collapse
I read the OP thoroughly and followed the instructions to the letter. But somehow I failed to backup my device. That is why I have been continuously requesting you to share the stock backup if possible for you. Please oblige if not too inconvenient for you. We are here to help each other.

Hello guys,
can I use this method for my moto XT1771. My Androind version is 7.1.1 .Thanks.