If anyone has any idea how to get to the point where you have to enter the msl # (which I already have) please post it here.
Thank you
wat r u trying to do?
You may try the following
##778 [SEND]
##778# [SEND]
On some network/device, this one might work
##DATA#
or if you're trying to program your phone ##MSL# should do it, replacing MSL with your actually MSL Code.
Some device/network might work with # at the end of the command, some might need an extra [SEND] to be press
##778 does not work
Thank you for your help.I was not clear what I wanted to do
here I was not clear is a post from ppcgeeks19-FIX THE SLOW RINGER
To do this, you will need your MSL, which only Sprint (or your provider) can provide you. Open up the phone app and dial ##778# (PST). You will be asked to enter your MSL. Enter it, and you will be brought into the provisioning of your phone. From the top left, select Modem Settings. On this page, your Slot Cycle Index (SCI) is how often your phone polls the tower for incoming calls, etc. This value is 1.28 seconds multiplied by 2^value (i.e 0=1.28 secs, 1=2.56secs) with 0 fastest, 7 slowest. The default is 2, but lowering it to 1 hasn't noticeably affected my battery life, and roughly 2.5 second (SCI 1) response time is far more reasonable than roughly 5 seconds (SCI 2)
hope this helps Thank you
IC...
I've tried this 'hack' but didn't notice any difference .... and for the record, I'm w/ Bell
u might have better luck in a telus-based community.... try this one
http://www.howardforums.com/forumdisplay.php?f=47
##778 followed by send works for me. I couldn't get it to work for the longest time (using ##778# Send) but it now works everytime with ##778.
Same problem. ##778 [send], ##778# [send], ##3282 [send], ##3282# [send] ect..... None of these work. I have a Sprint Touch. I actually need to get to this menu to fix some other issues (error code 67 and 1012). I got my MSL number from sprint, but i cant get to this menu. Anyone else have this problem and care to help me out? Thanks.
.eric
e_town said:
Same problem. ##778 [send], ##778# [send], ##3282 [send], ##3282# [send] ect..... None of these work. I have a Sprint Touch. I actually need to get to this menu to fix some other issues (error code 67 and 1012). I got my MSL number from sprint, but i cant get to this menu. Anyone else have this problem and care to help me out? Thanks.
.eric
Click to expand...
Click to collapse
My Sprint Touch works with ##DATA# (no need to hit send)
So, ##3282# should work for you.
atoy74 said:
My Sprint Touch works with ##DATA# (no need to hit send)
So, ##3282# should work for you.
Click to expand...
Click to collapse
I must be missing something really stupid here. Press talk to open phone dialer, type in ##3282# and the menu should just come up? Ive done this on my last phone (a900) and it worked. As soon as i hit the last # the "service" menu just came up. But nothing on the Touch. WTF. Anyone else have this issue?
.eric
e_town said:
I must be missing something really stupid here. Press talk to open phone dialer, type in ##3282# and the menu should just come up? Ive done this on my last phone (a900) and it worked. As soon as i hit the last # the "service" menu just came up. But nothing on the Touch. WTF. Anyone else have this issue?
.eric
Click to expand...
Click to collapse
Thats it. You're doing it right. Only other suggestion is give the phone a soft reboot. Maybe there's something in memory causing problems.
atoy74 said:
Thats it. You're doing it right. Only other suggestion is give the phone a soft reboot. Maybe there's something in memory causing problems.
Click to expand...
Click to collapse
Soft reboot and nothing. Sprint is about to get a call.
.eric
L A M E .
Called into sprint and had the glorious opportunity to talk to someone that just passed ESL. (english as a second language) Told them my problem, that i tried a client initiated IOTA update, soft resets ect. They instantly told me to reset the device. Got to an actual tech and they were stumped.
I pressed ##3282# and NOTHING happened. They were speechless leaving me no choice but to hard reset. ****. Gotta spend some time pulling off programs / files / reg settings and reset the beotch. I did get a nift number from them though, well, 2 actually. My MSL number (concidering having it engraved in my phone), and a higher tier direct tech support number.
877-809-6696 - Give it a shot if you need it.
Ill update on the progress. Cheers.
.eric
When I use the Google Voice Search to say "Call xxxx" (xxxx = any search term/non-contact) the number that shows after the search has a +1 in front of it. When it tries to dial it would ring, then a Verizon message would say the number cannot be dialed. I was hoping flashing CM7 would take care of this, but now it just fails to dial without the Verizon message. It fails immediately after attempting to dial.
I've seen a few topics across the web about this, most of them have to do with the phone adding a country code in place of the number and failing. However, I can't find a working solution.
CM7 doesn't appear to have call settings that would help. Has anyone experienced this issue? Can you dial a number that begins with a +1 from inside the US? I've heard (don't want to test) that dialing other countries with the plus sign works. I've also read that it's a known issue with HTC, and they may be working on a fix.
It's not a major problem, but that's what I typically use voice search for is searching for an address or number quickly. It's kind of a pain to memorize the number and dial that way.
For what it's worth, the issue is gone after flashing MIUI. It may be that I wiped the dalvik cache before flashing this one.
I'm Having a problem that I haven't had on any other Android phones. I can't seem to get into my work voicemail without having to enter my login and pass numerous times. It's like my voicemail can't recognize the keystrokes on this phone. It will keep asking me to re enter my vm number and randomly after a few tries I usually get in. Anyone else experience this?
I have a Verizon Note 4 (N910V) that I had unlocked a few weeks ago and am using it on T-Mobile. I'm having a few problems that are REALLY annoying.
1) I can not use the dialpad while in a call. For example, "Press 1 for English" I hit 1 and it does nothing. I've tried all the numbers with different 1-800 numbers and it just does not work.
2) My voicemail does not work. When I press 1 for voicemail, I get an error. I tried calling my number, but to enter my pin I need the dialpad to work. I tried YouMail, but that didn't work either. I never originally setup my T-Mobile voicemail so that could be why YouMail isn't working though.
Any help or suggestions would be appreciated. I'm pulling my hair out trying to google these problems.
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
lexbian said:
On the voicemail tip, you need to change the voicemail number setting... Theres already a threead for how to do this..
http://forum.xda-developers.com/note-4-verizon/general/verizon-note-4-t-mobile-network-t2916727
No clue on your touchscreen
Click to expand...
Click to collapse
Thank you for the help. Your link actually fixed my dial pad while in calls. It suggested to change the DTMF to long instead of short and it now works. As for the voicemail thing, I got it to work sort of. If I dial 123, it works just fine now. The only thing is, I can't seem to change the speed dial of 1 to the number 123. I tried and it said it was changed, but it still shows *86. I tried a few times with the same results each time. Is there another step I'm missing?
I haven't had to do this kind of thing to any of my phones in years. I wish I could help better. I just happened to remember changing APN settings was necessary and found that thread.
Awesome that fixed the touchscreen issue too!
i can not change that number
@GamerGuy89: how can you make Verizon Note 4 work with T-mobile?
i put the T-mobile simcard on it and it say "Not verizon Simcard". Signal is 0. Please help me!
And even i add another APN, but i can not change the number of voice mail from *86 to 123.
Thank you so much.
hi all.
i don't know why after updated to 5.0.1, i can not type *#06# to check my IMEI. When i key in that code on my keypad, the phone still there, nothing pop-up.
did my phone failed Rom or system???
Any input will be appreciated!
Thanks
Hi.
I've just had my first LineageOS (19.1) installed on a Galaxy S7 (SM-G930F). Most stuff working, but I would like to use FDN as well. While this works on my original android device, I cannot get it to work here.
Results are somewhat random, but unfortunatly in all directions. Sometimes I cannot dial when FDN is active while the number listed. Sometimes it works when I enter the number over the dialing pad but not when selecting the exactly same number from the contact. Sometimes I can dial when FDN is active whiel the number is _not_ listed. Sometimes I need to reboot and then results are different. Sometimes I cannot inactive FDN or alter the number list until I have again rebootet. Overall, I get the impression this is not really working with LineageOS. Can someone confirm this is indeed a OS issue or anyone got another idea why this is so randomly inaccurate behaviour on that feature?
Thanks /V