Related
ok, so i need some help if anyone can enlighten me. when i switch on 4g and it miraculously connects, it always brings up a "4g day pass" site. i, obviously thinking i'm paying for 4g service, click "no thanks" and try to visit another site...it auto kicks me off 4g and wont connect anymore... is 4g down in la or something???? little help here guys...
Call Sprint and ask them for help. Not much any of us can do here, sadly.
th3_g00b said:
ok, so i need some help if anyone can enlighten me. when i switch on 4g and it miraculously connects, it always brings up a "4g day pass" site. i, obviously thinking i'm paying for 4g service, click "no thanks" and try to visit another site...it auto kicks me off 4g and wont connect anymore... is 4g down in la or something???? little help here guys...
Click to expand...
Click to collapse
It seems you have the realm set up for clear instead of Sprint so it sends you to that page instead
fenixjn said:
It seems you have the realm set up for clear instead of Sprint so it sends you to that page instead
Click to expand...
Click to collapse
Yep I agree, get your msl, go to dialer dial ##data# choose edit mode, enter your msl, go to wimax, choose realm, change it to sprintpcs.com, then hit menu, commit modifications. Phone will reboot and you should be good to go.
Evo Sent
ifly4vamerica said:
Yep I agree, get your msl, go to dialer dial ##data# choose edit mode, enter your msl, go to wimax, choose realm, change it to sprintpcs.com, then hit menu, commit modifications. Phone will reboot and you should be good to go.
Evo Sent
Click to expand...
Click to collapse
ok so i did that and i dont get that 4daypass anymore but now it tells me that the network isnt responding...
th3_g00b said:
ok so i did that and i dont get that 4daypass anymore but now it tells me that the network isnt responding...
Click to expand...
Click to collapse
Did you update profile and prl? from the home screen ... menu/settings/system updates then update both profile and prl.
if that doesnt work try ##data# edit mode, enter your msl, go to data profile, then menu and restore. make sure you have a good strong signal when doing this, it will comletely restore your data settings, might take a few minutes.
Neither of the above should hurt anything, let us know how it goes.
ifly4vamerica said:
Did you update profile and prl? from the home screen ... menu/settings/system updates then update both profile and prl.
if that doesnt work try ##data# edit mode, enter your msl, go to data profile, then menu and restore. make sure you have a good strong signal when doing this, it will comletely restore your data settings, might take a few minutes.
Neither of the above should hurt anything, let us know how it goes.
Click to expand...
Click to collapse
Tried it and now im back to 4gdaypass.....I called sprint and they said they were escalating my issue....idk what else I could do on my end :/
th3_g00b said:
Tried it and now im back to 4gdaypass.....I called sprint and they said they were escalating my issue....idk what else I could do on my end :/
Click to expand...
Click to collapse
That's probably the best thing that can be done.
thetakara said:
That's probably the best thing that can be done.
Click to expand...
Click to collapse
*sigh* no 4g for me
th3_g00b said:
*sigh* no 4g for me
Click to expand...
Click to collapse
are there any Sprint stores with service center nearby? you might want to try that and see if they can help...
miguelfp1 said:
are there any Sprint stores with service center nearby? you might want to try that and see if they can help...
Click to expand...
Click to collapse
They just keep telling me that an app is messing up my phone.....every time .....
th3_g00b said:
They just keep telling me that an app is messing up my phone.....every time .....
Click to expand...
Click to collapse
Ha. Try programming it manually. Here are all the ##DATA# settings:
Standby Time 10
Scan Rate 30
NAI [wimax-mac-id-without-colons]@sprintpcs.com
User name [vision-username]@sprintpcs.com
Realm sprintpcs.com
Center frequency 2647000,2657000,2667000
Bandwidth 10, 10, 10
NAPDIS 000002
NSPDIS 000004
WiMax Scan Attempt Time 1
WiMAX Scan Retry 120
WiMAX Idle Sleep 10
WiMAX Entry RX -89
WIMAX Entry CINR 4
WiMAX Entry Delay 300
WiMAX Exit CINR 2
WiMAX Exit Delay 2
Handoff Threshold 0
Idle Mode Timer 0
TLS Enable
TTLS Disable
aph said:
Ha. Try programming it manually. Here are all the ##DATA# settings:
Standby Time 10
Scan Rate 30
NAI [wimax-mac-id-without-colons]@sprintpcs.com
User name [vision-username]@sprintpcs.com
Realm sprintpcs.com
Center frequency 2647000,2657000,2667000
Bandwidth 10, 10, 10
NAPDIS 000002
NSPDIS 000004
WiMax Scan Attempt Time 1
WiMAX Scan Retry 120
WiMAX Idle Sleep 10
WiMAX Entry RX -89
WIMAX Entry CINR 4
WiMAX Entry Delay 300
WiMAX Exit CINR 2
WiMAX Exit Delay 2
Handoff Threshold 0
Idle Mode Timer 0
TLS Enable
TTLS Disable
Click to expand...
Click to collapse
checked and everything is the same. 2 days and still no word from sprint....this sucks. i really dont know what my options are at this point, this is my second phone as my first phone's usb port went out and they told me they wont replace this one because they cant recreate the problem/its an app causing the issue....i wish people at the store werent such assholes....
Ok, so now I'm getting an error message for sprint tv saying im not authorized to use the app...day 3 and still no word from sprint....open to suggestions...
I had the issue but pushed over to vzw on 3g. I had to reflash the lastest stock rom. Then it worked for me, something went goofy in the rom settings is what I figured was the issue.
Sent from my PC36100 using XDA App
glennpettit said:
I had the issue but pushed over to vzw on 3g. I had to reflash the lastest stock rom. Then it worked for me, something went goofy in the rom settings is what I figured was the issue.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Btw, my phone is stock...I guess my only option is to run the 3.29 to install it and start from scratch.
i have the same issue.
http://forum.xda-developers.com/showthread.php?t=1016919
Yeah wipe it, unroot, don't install any apps, take it to the store, then see what they say.
Sent from my hand with XDA Premium installed
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
bigshotrob22 said:
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
Click to expand...
Click to collapse
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
PRL
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
ejdavis72 said:
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
Click to expand...
Click to collapse
I did all that last night with qpst. I am able to get 3G now because I manually updated my PRL to 3220 (or something like that). I have everything working like talk, text, MMS but I cant update through *228. Thanks for your response.
ejdavis72 said:
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
Click to expand...
Click to collapse
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
bigshotrob22 said:
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
Click to expand...
Click to collapse
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
ejdavis72 said:
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
Click to expand...
Click to collapse
I updated it but still a no go on the *228 update.
bigshotrob22 said:
I updated it but still a no go on the *228 update.
Click to expand...
Click to collapse
Try *22807 and see if that works.
ejdavis72 said:
Try *22807 and see if that works.
Click to expand...
Click to collapse
Tried that too
Sent from my DROIDX using XDA App
bigshotrob22 said:
Tried that too
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Try this one.
ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Ill try it in a bit
Sent from my DROIDX using XDA App
ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Didnt work either.
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
bigshotrob22 said:
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
iRage said:
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
Click to expand...
Click to collapse
Yes she had an account previous to her Dinc so after i flashed her phone I called and got the MDN and MIN from cricket and also I gave them the MEID from the DINC..she has service but I just can't get the phone to get the OTA update and like you I've tried at least 30 prl's. Currently I have 32400 prl loaded on her phone with no problems but I know that's not the prl she is supposed to be using. By the way I live in tucson az..Thanks for your reply
Sent from my DROIDX
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
iRage said:
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
Click to expand...
Click to collapse
I know that happens when you update and I don't mind that but I just want her to pull the correct prl and eri files.
Sent from my DROIDX
BUMP
Sent from my DROIDX
RESOLVEDD!!!!
bigshotrob22 said:
BUMP
Sent from my DROIDX
Click to expand...
Click to collapse
hey buddy i just noticed that you are from tucson as well!
well let me tell you that i have flashed android phones to cricket (my own) like the evo, droid 1, eris and incredible. ad let me tell you its not as hard as it seems or people make it seem, so here it is! the attached zip file contains OUR NEW NATION WIDE PRL and flashing instructions. you do not need QPST if your phone is already unlocked with 000000 if you dial ##778.
anyways just put the prl on sdcard then dial ##778 then password is:000000
go to PRL>update PRL> then choose the prl i have attached then follow the instructions from step 3 (skip 1, 2) without skipping anything and you should have your web mms set up!!
however if you run to any problems PM me and ill help you or i can either meet up with you here in the southwest of town and ill do it for you.
Does anyone have a good link or how-to for manually programming the Incredible? My phone won't call/text/connect to mobile network, but everything else (wi-fi, GPS, all apps) work fine. I think manually programming could fix it, but it seems like some murky territory if you're not absolutely sure what you're doing
Set up only involves you dialing *228 and follow the prompts to either activate a phone or update your roaming. I believe the only other activation method involves Verizon doing this in store.
It depends on what Rom you are using and what EPST but I can type ##000000# and able to change MSN and MSID(MIN). Then I can also type ##PRL#, 000000, which allows to update the PRL. With this Voice and Text should work. Only other thing that might need updating is SID which I found after typing ##DATA#, edit, 000000, in Advanced.
Again, it depends on the version of EPST you have on the phone.
The other way to manually program would be using QPST on your computer and typing ##DIAG# on the phone.
Finally some roms require to press Call after the # codes.
Sent from my Droid Incredible using Tapatalk
SlimSnoopOS said:
Set up only involves you dialing *228 and follow the prompts to either activate a phone or update your roaming. I believe the only other activation method involves Verizon doing this in store.
Click to expand...
Click to collapse
I tried to program it with *228 but my phone couldn't even connect to the network to do that. It can't connect a call at all.
Flagmax said:
It depends on what Rom you are using and what EPST but I can type ##000000# and able to change MSN and MSID(MIN). Then I can also type ##PRL#, 000000, which allows to update the PRL. With this Voice and Text should work. Only other thing that might need updating is SID which I found after typing ##DATA#, edit, 000000, in Advanced.
Again, it depends on the version of EPST you have on the phone.
The other way to manually program would be using QPST on your computer and typing ##DIAG# on the phone.
Finally some roms require to press Call after the # codes.
Sent from my Droid Incredible using Tapatalk
Click to expand...
Click to collapse
I'm on MIUI, but I could definitely flash back to the stock RUU before attempting
JohnSmith1818 said:
I tried to program it with *228 but my phone couldn't even connect to the network to do that. It can't connect a call at all.
I'm on MIUI, but I could definitely flash back to the stock RUU before attempting
Click to expand...
Click to collapse
Gotcha. To add, you must perform *228 while on a Sense ROM then revert back to AOSP. I'm not sure if you did that or if that would help in this case. That said, FlagMax's magic is way more in depth.
You mind my asking, when and how did this issue arise?
SlimSnoopOS said:
Gotcha. To add, you must perform *228 while on a Sense ROM then revert back to AOSP. I'm not sure if you did that or if that would help in this case. That said, FlagMax's magic is way more in depth.
You mind my asking, when and how did this issue arise?
Click to expand...
Click to collapse
I had unrooted and flashed back to stock RUU when I tried the *228. Still didn't work.
Was a very strange situation. Phone was workign fine Saturday night when I went to bed. When I woke up Christmas morning, the screen wouldn't turn on and there was no LED indicator when I plugged it into a charger. I pulled the battery a couple times, but it wouldn't turn back on until I had pulled the battery and wiped the contacts off. After it booted back up, I wasn't able to call/text, but could still connect to mobile internet and wi-fi. I figured it was just terrible reception at my parents' house, but on the drive back the next day I lost mobile internet too and wasn't able to do anything with it since.
No clue what happened... but it all started with that battery problem. Go figure.
that's exactly the same as my problem.
I experienced a few reboots on the past week and suddenly it disconnected from network.
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
michael.hooboob said:
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
Click to expand...
Click to collapse
We are going to need more info then that. Your AAA and HA user name name and password have nothing to do with getting calling to work just data. Make sure you entered the correct meid in QXDM and that u also put in your phone number and mdn as well in qpst.
Sent from my SPH-D700 using XDA App
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to <not set>.
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
michael.hooboob said:
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to .
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
Click to expand...
Click to collapse
First of all delete that!!!
And secondly try to use dfs cdma instead of qpst.
Edit: looks like u Xed out the important stuff.
Sent from my SPH-D700 using XDA App
I always re-input all qpst data, including passwords, each time I use it to avoid possible data corruption, as well as going to ##DATA# and viewing the starred passwords there.
Sent from my SPH-D700 using xda premium
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
michael.hooboob said:
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
Click to expand...
Click to collapse
That's good info for someone on a intercept. I just went ahead and stuck with the adb log method to blanket cover all who may not be using an intercept phone.
Sent from my SPH-M910 using xda premium
okay, so i tried reflashing all settings for my data to work, but i still can't even get 1x......
my settings are IDENTICAL to this guy's -- http://forum.xda-developers.com/showpost.php?p=23117907&postcount=281
a little stumped to be honest, any ideas?
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
michael.hooboob said:
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
Click to expand...
Click to collapse
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Shinydude100 said:
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Lol I feel like if people just followed the tutorial they would have 0 problems. Once u get all the needed keys and what not the epic is a breeze to flash.
Sent from my SPH-D700 using XDA
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
michael.hooboob said:
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
Click to expand...
Click to collapse
Start over fresh? Why Certainly! Odin EL30 Stock Tar. Have Repartition checked and make sure you have efs clear selected as well.
WARNING!!!! EFS clear is going to wipe that phone clean, you'll have to re-input the ESN (I think) and prl, etc. Least that's what I believed happened to me last time I did an efs clear.
Sent from my SPH-D700 using xda premium
i will do that once i am off work!
you guys are a lot of help, and i appreciate it.
i just want to start off fresh because i was about half asleep when i entered all the numbers in and i'm about 99.5% positive i funked up a number somewhere that shouldn't have been effed with.... i'll let you know if it works!
well! reflashing to stock fixed my problems.
followed your guide and entered all the settings verbatim.
the 3g icon is up, data is working .....very slowly.
this leads me to believe that it's not actually 3g and just 1x.
according to mobile speed test i'm going at about dial up speeds (not even 1x) with 3 bars of service.
any idea??
got it!
it just fixed itself when i cycled data mode on and off, thanks guys!
getting solid 1 mbps downloads with half that for uploads in my area of NE!
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
Do you have a nandroid of the ROM you can restore to see if that will bring back 3g? If not then it's something else.
idid try a nandroid and i didnt work i tried ruu and that didnt work either
deriq4251 said:
idid try a nandroid and i didnt work i tried ruu and that didnt work either
Click to expand...
Click to collapse
It's probably something outside of the ROM settings. I don't think a lot of us are familiar with metro but maybe see if someone in the land of googles has had that issue and a fix.
I'd almost say re-flash to metro but I don't recommend it as I'm not sure what the flashing to metro involves.
thats what someone else told me , but i wanted to check around here first . thanks
Some Stock Plus roms have a bad habit of changing the active profile on your phone, and each time you change it and are forced to restart for the changes to take effect, it reverts to the wrong profile after it restarts.
1. to fix it, wipe and flash a Sense rom that worked for you before.
2. go to profile settings using one of those ## shortcuts, I think it is ##data# or ##Debug#, don't remember exactly.
3. Go to Profiles and change the active profile from 0 to 1 or the other way around. (don't remember which is the right profile)
4.Restart and make sure 3G works.
5. Flash your favorite rom that doesn't mess the profiles up.
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
If you find the solution please post it here. I'm in the same boat I have a incredible flashed to metro and everything works. Problem is that I only get 1x. That's on the stock sense and cm7 which I currently use. I've tried prls 3022-3026 and nothing works and I live right outside Detroit so I should get 3g
Sent from my ADR6300 using xda premium
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
deriq4251 said:
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
Click to expand...
Click to collapse
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
cmlusco said:
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
Click to expand...
Click to collapse
I tried everything in this thread and still no go damn guess I'm stuck with 1x until I get my SGS 2 and move to T-Mobile monthly
Sent from my ADR6300 using xda premium
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
deriq4251 said:
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
Click to expand...
Click to collapse
Where do you live and what ROM were you on when you had 3g working
Sent from my ADR6300 using xda premium
I live in Florida and I was using stock Rom then I tried 3.5 Rom then ics Rom all was good then I don't know what Rom but one of them it said 1x now I have none
Sent from my ADR6300 using XDA
Google metropcs flashing solution Droid incredible
There is a tutorial that tells how to get internet working, that's how I got 1x. I just got my esn added to metro then used that website to get internet and mms working.
Sent from my ADR6300 using xda premium