Cricket *228 - Droid Incredible Q&A, Help & Troubleshooting

Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.

bigshotrob22 said:
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
Click to expand...
Click to collapse
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.

PRL
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.

ejdavis72 said:
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
Click to expand...
Click to collapse
I did all that last night with qpst. I am able to get 3G now because I manually updated my PRL to 3220 (or something like that). I have everything working like talk, text, MMS but I cant update through *228. Thanks for your response.

ejdavis72 said:
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
Click to expand...
Click to collapse
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.

bigshotrob22 said:
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
Click to expand...
Click to collapse
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.

ejdavis72 said:
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
Click to expand...
Click to collapse
I updated it but still a no go on the *228 update.

bigshotrob22 said:
I updated it but still a no go on the *228 update.
Click to expand...
Click to collapse
Try *22807 and see if that works.

ejdavis72 said:
Try *22807 and see if that works.
Click to expand...
Click to collapse
Tried that too
Sent from my DROIDX using XDA App

bigshotrob22 said:
Tried that too
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Try this one.

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Ill try it in a bit
Sent from my DROIDX using XDA App

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Didnt work either.

Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App

bigshotrob22 said:
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know

iRage said:
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
Click to expand...
Click to collapse
Yes she had an account previous to her Dinc so after i flashed her phone I called and got the MDN and MIN from cricket and also I gave them the MEID from the DINC..she has service but I just can't get the phone to get the OTA update and like you I've tried at least 30 prl's. Currently I have 32400 prl loaded on her phone with no problems but I know that's not the prl she is supposed to be using. By the way I live in tucson az..Thanks for your reply
Sent from my DROIDX

Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off

iRage said:
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
Click to expand...
Click to collapse
I know that happens when you update and I don't mind that but I just want her to pull the correct prl and eri files.
Sent from my DROIDX

BUMP
Sent from my DROIDX

RESOLVEDD!!!!
bigshotrob22 said:
BUMP
Sent from my DROIDX
Click to expand...
Click to collapse
hey buddy i just noticed that you are from tucson as well!
well let me tell you that i have flashed android phones to cricket (my own) like the evo, droid 1, eris and incredible. ad let me tell you its not as hard as it seems or people make it seem, so here it is! the attached zip file contains OUR NEW NATION WIDE PRL and flashing instructions. you do not need QPST if your phone is already unlocked with 000000 if you dial ##778.
anyways just put the prl on sdcard then dial ##778 then password is:000000
go to PRL>update PRL> then choose the prl i have attached then follow the instructions from step 3 (skip 1, 2) without skipping anything and you should have your web mms set up!!
however if you run to any problems PM me and ill help you or i can either meet up with you here in the southwest of town and ill do it for you.

Related

[Q] NO Internet, no MMS- Talk and text work sorta... Need A lil Help!!!!

FIrst off I dont get any reception from my Dinc in the house, the donor I do. When out and about my reception spikes to full bars on the Dinc but I still get no internet and cannot send pic mail. Talk and text work fine. I have changed my prl several times. (30 or more to be exact) I have correctly wrote my ha and aaa passwords. used the m. ip setting from the donor. ppp i used the ones from donor and setups that have worked for others. Im lost!!! When i connect to the internet it says no internet connection. What am I missing. I am still on the stock DInc rom, should i flash to cm7 or another rom? Any suggestions would help. Im also in the md/dc/va area, so if anyone is local, what prl are you using? What are your ppp setting?
Have you tried doing a *228 option 1? That should program everything you need to get net access.
cmlusco said:
Have you tried doing a *228 option 1? That should program everything you need to get net access.
Click to expand...
Click to collapse
*228 May work for Vz customers, but my wifes phone and mine get a error message when I dial *228. Im startin to think i have a bum phone. I got my wifes phone setup today, she has reception using the same exact setup as mine including the prl.... So i may have to get rid of this one and get a different phone. :-/
Are you using this dinc with another carrier besides Verizon or a verizon mvno? Are you using it on Boost Mobile as your avatar suggests?
Yes boost mobile...
sxxdnne said:
Yes boost mobile...
Click to expand...
Click to collapse
Maybe this could help?
http://forum.xda-developers.com/showthread.php?t=1156930&highlight=boost+mobile
fp99 said:
Maybe this could help?
http://forum.xda-developers.com/showthread.php?t=1156930&highlight=boost+mobile
Click to expand...
Click to collapse
Thats the guide i followed along with a few others, still no luck. I had 1x for like 2 seconds then it went away and never came back.
sxxdnne said:
Thats the guide i followed along with a few others, still no luck. I had 1x for like 2 seconds then it went away and never came back.
Click to expand...
Click to collapse
Sorry, that's the only guide I know.

[Q] no 3G only 1x after flash rom

okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
Do you have a nandroid of the ROM you can restore to see if that will bring back 3g? If not then it's something else.
idid try a nandroid and i didnt work i tried ruu and that didnt work either
deriq4251 said:
idid try a nandroid and i didnt work i tried ruu and that didnt work either
Click to expand...
Click to collapse
It's probably something outside of the ROM settings. I don't think a lot of us are familiar with metro but maybe see if someone in the land of googles has had that issue and a fix.
I'd almost say re-flash to metro but I don't recommend it as I'm not sure what the flashing to metro involves.
thats what someone else told me , but i wanted to check around here first . thanks
Some Stock Plus roms have a bad habit of changing the active profile on your phone, and each time you change it and are forced to restart for the changes to take effect, it reverts to the wrong profile after it restarts.
1. to fix it, wipe and flash a Sense rom that worked for you before.
2. go to profile settings using one of those ## shortcuts, I think it is ##data# or ##Debug#, don't remember exactly.
3. Go to Profiles and change the active profile from 0 to 1 or the other way around. (don't remember which is the right profile)
4.Restart and make sure 3G works.
5. Flash your favorite rom that doesn't mess the profiles up.
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
If you find the solution please post it here. I'm in the same boat I have a incredible flashed to metro and everything works. Problem is that I only get 1x. That's on the stock sense and cm7 which I currently use. I've tried prls 3022-3026 and nothing works and I live right outside Detroit so I should get 3g
Sent from my ADR6300 using xda premium
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
deriq4251 said:
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
Click to expand...
Click to collapse
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
cmlusco said:
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
Click to expand...
Click to collapse
I tried everything in this thread and still no go damn guess I'm stuck with 1x until I get my SGS 2 and move to T-Mobile monthly
Sent from my ADR6300 using xda premium
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
deriq4251 said:
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
Click to expand...
Click to collapse
Where do you live and what ROM were you on when you had 3g working
Sent from my ADR6300 using xda premium
I live in Florida and I was using stock Rom then I tried 3.5 Rom then ics Rom all was good then I don't know what Rom but one of them it said 1x now I have none
Sent from my ADR6300 using XDA
Google metropcs flashing solution Droid incredible
There is a tutorial that tells how to get internet working, that's how I got 1x. I just got my esn added to metro then used that website to get internet and mms working.
Sent from my ADR6300 using xda premium

[Q] 3G not working

Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
ankurcshah said:
I guess i went into ##DATA# and messed something without my knowledge.
Click to expand...
Click to collapse
You "guess" you messed around with something???
Call Sprint
Sent From My Galaxy10. 1 Class Starship...
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Flashing stock ROM wont reset those settings. You will need to reset the activation on a stock ROM. I'm not sure of the code for that but its been in the treads a few times....
Which would be ##786#.....
Still no avail brother!
ankurcshah said:
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Click to expand...
Click to collapse
Is this device compatible with the 3g service your provider uses?
Yes it is. I have been using for quite a some time now.
Having the exact same issue. Not sure what caused it or how to fix it. I too am on stock rom
ankurcshah said:
Yes it is. I have been using for quite a some time now.
Click to expand...
Click to collapse
Have you contacted your cellular provider? If you changed some settings, most likely calling your provider to get the right settings will be your best course of action.
Sent From My Galaxy10. 1 Class Starship...
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Any help?
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
brooksyx said:
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
ankurcshah said:
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Click to expand...
Click to collapse
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
ankurcshah said:
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
Click to expand...
Click to collapse
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Questions:
1. If not how did you get it setup to see their towers???
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
3. If they did, do you still have them and have you tried that???
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
Yes,currently on el29 one click. but stock kernel without cwm
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
Could you link me?
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Nope, I just needed the dump file for the 3g to work, 3g works on my dad's phone and it doesnt on mine. I use the same dump as his. Still? Wierd
Questions:
1. If not how did you get it setup to see their towers???
I just flashed a prl
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
nope, I had set the msl to 000000
3. If they did, do you still have them and have you tried that???
They are not aware of such a thing also.
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
I tired they don't understand "reprovision radios"
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
ankurcshah said:
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
Click to expand...
Click to collapse
The reset I mentioned is a "factory reset" ... But like I already posted... It will only delete all of your user data and reset settings like wifi, email passwords...
It won't reset the radios...
If you had already flashed these files to get your phone working when you got it, Don't you still have them???
Sent From My Galaxy Class Star Fighter...
My 2 cents here, not completely sure but I saw this today.
Know your msl
>go to phone enter ##data#
>Click edit
>Then enter msl
>click other
>go into Korea mode
>click on India mode, press okay.
>reboot
Sent from my SPH-D710 using Tapatalk 2
Tried out! No changes takes place. Gonna take the qcn of a friends write it onto my phone,change imsi,meid,mdn and check.
Sent from my SPH-D710 using Tapatalk 2
Were u mentioning the one click thingys? Yes i have tried out every damn thing now.
Now on ics still no 3G
Sent from my SPH-D710 using Tapatalk 2
The one click restore files are for Sprint phones so I doubt if they would work for you
Hmmm,all right
Sent from my SPH-D710 using Tapatalk 2

[Q] Galaxy Nexus Flashing Help

I have read through the entire thread at http://forum.xda-developers.com/showthread.php?t=1696621 which has helped me a lot. I noticed not suppose to ask help on that thread so I figured I start one here and you may delete my post I made on that thread.
I have a Verizon Nexus SCH-i515 I would like to get working on PagePlus. I currently have talk/text working, but no 3g. I have Verizon Paranoid Android rom, sprint FC12 CDMA radio. Using PRL 52874 provided OTA *22800.
I tried using the script for ets that AutoPrime provided on the mentioned thread above, but I do not know the HA, AAA, or Akey. I do not know how to obtain these settings. I'm assuming this is why I can't get 3g working.
I have a Droid RAZR Maxx flashed to PagePlus and I didn't need any of these settings. It was basically ##PROGRAM, set MDN, MIN, and SID, then use CDMA workshop or DFS, set EVDO to rev.a, and disable R-UIM by setting to NV only.. power on, *#*#INFO#*#* change to CDMA Auto (PRL), done.. so I don't know how to get these AAA,HA, or akey from.
Reading around some people are getting these settings from donors, but I don't have an actual PagePlus phone. If anyone can help me I'd be very happy and greatly appreciated.
Back to reading the mentioned thread above for the 5th time, see if I missed something. Thanks!
OK, seems everything I read says I need a donor phone. Can anyone tell me why I didn't need this when putting razr on page plus? Did it get all the info ota? Guess I'll have to dig up my LG dare to use as a donor, if I can.
Is it possible to swap razr and nexus esn, get the info then swap back?
AAA, HA, Akey backup??
Ok, swapped phones, now I need to find how to get Akey, AAA, and HA from the Verizon RAZR maxx... in DFS > programming > general > cave > get reports A_Key cps-error bad-param
ssd-a cps-error bad-param
ssd-b cps-error bad-param
Now under DFS > NV > read
I get 466, 580, 889, 906, 920,1192 cps-error bad-param
So this phone has 3g and works but no akey, aaa, or ha?
Is there a way to record a log of an ota on the razr maxx to get HA AAA and akey?
Also is there a way to log the nexus trying to connect to see the error message?
Razr keys
Stop trying to get the keys from the Razr; they won't help. The only AAA and HA etc. info. that will help you is that of a phone that has been activated with working 3G on Page Plus. The Razr is most likely locked up (as for the NV items), so if you think you need the 3G data, go for a cheap, easily accessible phone (LG Vortex, pretty much any Samsung, etc.).
I can live with 1x on Page Plus with my Gnex, but I don't use data that much. You get very little data on PP anyway.
Use Autoprime's script for P+, then go in and use "NV Manager" with ETS (just to be super sure everything is as it should be--I think the script put my MDN where my MSID should be actually). This got me 1x, talk and text.
I'm happy.
God Bless!
K4J98 said:
Stop trying to get the keys from the Razr; they won't help. The only AAA and HA etc. info. that will help you is that of a phone that has been activated with working 3G on Page Plus. The Razr is most likely locked up (as for the NV items), so if you think you need the 3G data, go for a cheap, easily accessible phone (LG Vortex, pretty much any Samsung, etc.).
I can live with 1x on Page Plus with my Gnex, but I don't use data that much. You get very little data on PP anyway.
Use Autoprime's script for P+, then go in and use "NV Manager" with ETS (just to be super sure everything is as it should be--I think the script put my MDN where my MSID should be actually). This got me 1x, talk and text.
I'm happy.
God Bless!
Click to expand...
Click to collapse
My RAZR maxx is on page plus with full working 3g,talk,text.. that's why I thought it would work if I swapped gnex esn to the razr, activated it, then tried to get HA/AAA then switch back.. but couldn't get them.. Did you use a donor to get 1x? What radios, rom, and prl are you using? The script for P+ requires HA/AAA ,well could be blocked off with /// but thought these were needed.
I do have a Verizon LG Dare somewhere if I can find it, could use it as a donor. Problem is finding it.
HA AAA passwords no donor
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
try flashing a radio thats actually for your phone if it will even work anymore after flashing one not intended for it.
I can flash Verizon radio but its not programmable. Will settings stay? Ill try that I just wrote all values to profile 0 and 1.. set 0 active no data, set 1 active no data..
My ha pass is only 9... script says 16.. should I add some 0's to the end to make it 16?
Watching this thread closely. I have a gnex I'm trying to get on page plus with 3g.
Sent from my SCH-I500 using Tapatalk 2
HA AAA passwords no donor
As I thought tossed on Verizon radio, settings reverted back to what SIM was programmed for. So I tossed in a blank SIM, mdn, min, etc all 0's and not changable.. so tossing Sprint radio back on unless someone knows of a Verizon radio that will accept changes.
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
How long and difficult is this process? I'm mulling over whether I'm gonna pay someone to do this or not. Romming is one thing but this flashing might be over my head.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
How long and difficult is this process? I'm mulling over whether I'm gonna pay someone to do this or not. Romming is one thing but this flashing might be over my head.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Well if there was a guide it'd be pretty easy, but with no guide and over thousands of setting combinations, I'm just doing trial and error..
I don't think anyone at all has a Nexus on pageplus fully working.. Using a donor or not.. No one has said anything in any of the forums I read or youtube, so guessing that no one has it working. Guy above says he has 1x on pageplus, but I can't even get that, and I think he is the only one. All I have is talk/text working flawless..
There has been about 2 people that say they have the Nexus fully flashed to cricket.. but I have not attempted that as I'd rather have pageplus. If I can't get pageplus I may look into cricket and compare their speedtests with virgin mobile and flash to one of them. I have donors for VM.
I
urhaxable said:
Well if there was a guide it'd be pretty easy, but with no guide and over thousands of setting combinations, I'm just doing trial and error..
I don't think anyone at all has a Nexus on pageplus fully working.. Using a donor or not.. No one has said anything in any of the forums I read or youtube, so guessing that no one has it working. Guy above says he has 1x on pageplus, but I can't even get that, and I think he is the only one. All I have is talk/text working flawless..
There has been about 2 people that say they have the Nexus fully flashed to cricket.. but I have not attempted that as I'd rather have pageplus. If I can't get pageplus I may look into cricket and compare their speedtests with virgin mobile and flash to one of them. I have donors for VM.
Click to expand...
Click to collapse
Gotcha. I just picked up a Sprint Gnex, literally minutes ago,lol. It was 125, so i couldn't pass it up. From what i gather it is easier than the verizon gnex.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
I
Gotcha. I just picked up a Sprint Gnex, literally minutes ago,lol. It was 125, so i couldn't pass it up. From what i gather it is easier than the verizon gnex.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
Yeah Sprint Nexus is a little easier as you don't have to worry about radios, your stock radios allow programming. And since you are already Sprint you don't need to flash a sprint rom to access some on phone programming menus.
alphahere has a Sprint GNex fully working on Page Plus. These are the steps he took to get it working.
alphahere said:
1) Had a donor phone - HTC incredible, cloned all values needed to the Sprint Galaxy Nexus.
2) Modified the verizon script using the values from the HCT incredible.
3) Ran the script with ETS
4) Lastly did over the air programming with verizon (pageplus).
5) Modified the APN to work for verizon mms.
Click to expand...
Click to collapse
I suspect you are having the same problem I'm having. I just flashed a Sprint GNex to Page Plus a few days ago. However 3G data is not working because I used a Droid X as the donor and as I have learned in the last couple of days Motorola has their phones locked up pretty tight. I'm unable to pull the NV items needed to obtain the HA/AAA/PPP keys.
In the next few days I'm going to try and find a cheap LG or Samsung phone and use that as the donor instead.
---------- Post added at 01:44 PM ---------- Previous post was at 01:38 PM ----------
urhaxable said:
Well I've been changing so many settings that probably never needed changed. Going through every setting in ets seeing what does what. After changing some settings and pulling down some OTA via *22800 I have been able to get HA and AAA passwords without a donor. I still have no 3g data though.
Plugging phone number, HA, and AAA into AutoPrime's ets script still does not get me 1x or 3g data on pageplus. So there is still something missing on his script, something wrong on script, or maybe my phone is just glitched.
I did read somewhere that Nexus on pageplus should use profile 0, I noticed in AutoPrime's script he changes profile 1 settings. Maybe I'll try changing these around or something.
Click to expand...
Click to collapse
If you are using a Verizon ROM there's a patch you need to apply. Check this post.
On a scale of 1 to 10 with romming/rooting being a five what would you guys rate flashing a Sprint gnex to page plus.
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
On a scale of 1 to 10 with romming/rooting being a five what would you guys rate flashing a Sprint gnex to page plus.
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
On the GNex romming/rooting is a 1. Flashing a Sprint GNex is a 5 (autoprime's ETS instructions and scripts make it easy) and pulling the data you need from a donor phone can be a 5-10 depending on which phone you use as the donor.
Once you go through the process once though it's pretty easy.
silow said:
On the GNex romming/rooting is a 1. Flashing a Sprint GNex is a 5 (autoprime's ETS instructions and scripts make it easy) and pulling the data you need from a donor phone can be a 5-10 depending on which phone you use as the donor.
Once you go through the process once though it's pretty easy.
Click to expand...
Click to collapse
Sweet. I might give it a try. Will me Samsung Fascinate work as a donor for my Sprint gnex?
Sent from my SCH-I500 using Tapatalk 2
94SupraTT said:
Sweet. I might give it a try. Will me Samsung Fascinate work as a donor for my Sprint gnex?
Sent from my SCH-I500 using Tapatalk 2
Click to expand...
Click to collapse
I would anticipate the Fascinate to be pretty easy to use with CDMA Workshop/QPST/QXDM. As long as you stay away from Motorola...

PRL 2000 ?

My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
advice
Hey you may want to edit the first pic shows way too much info ......phone number meid etc .....
PRL 2000 is an emergency prl I dont know the specific details but in the sprint prl update thread its been happening to alot of people what you can do is manually update your prl to say 25013/15 or 55015 or something like that or try the modded verizon prls they're doing great for me
chris0160 said:
PRL 2000 is an emergency prl I dont know the specific details but in the sprint prl update thread its been happening to alot of people what you can do is manually update your prl to say 25013/15 or 55015 or something like that or try the modded verizon prls they're doing great for me
Click to expand...
Click to collapse
Where are these prl's at to get? im stuck on 2000 and going in and pressing the update button still just leaves me with 2000.
downsouthballa said:
My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
Click to expand...
Click to collapse
I had the same error even after going back to stock. Sprint rep said that they have no record of that error and didn't know how to handle it. He reset the phone with ## commands (sorry don't remember) then the phone wouldn't activate. Took back to best buy and the Samsung rep flashed something, no help. I have a replacement now. I hope you have better luck.
Sent from my SPH-L900 using Tapatalk 4 Beta
##3282 itll show the data menu click view and there should be a tab for PRL write click it then click prl write again.... 1st did you find the prls? If not google search every sprint prl its xda galaxy s3 thread the first one and download allprl.zip and extract it and choose which prl copy it to the root of your sdcard rename it to test.prl REMEMBER TO TURN OFF DATA it wont work without that I learned that from someone in the sprint prl update thread then do the earlier steps ##3282# etc....
---------- Post added at 09:15 PM ---------- Previous post was at 09:08 PM ----------
Every Sprint Prl
https://www.google.com/url?sa=t&sou...919etGIh-4Jf43qXw&sig2=tO5XUd6jGrmBgdonbvmcwg
Maybe everything you need
chris0160 said:
##3282 itll show the data menu click view and there should be a tab for PRL write click it then click prl write again.... 1st did you find the prls? If not google search every sprint prl its xda galaxy s3 thread the first one and download allprl.zip and extract it and choose which prl copy it to the root of your sdcard rename it to test.prl REMEMBER TO TURN OFF DATA it wont work without that I learned that from someone in the sprint prl update thread then do the earlier steps ##3282# etc....
---------- Post added at 09:15 PM ---------- Previous post was at 09:08 PM ----------
Every Sprint Prl
https://www.google.com/url?sa=t&sou...919etGIh-4Jf43qXw&sig2=tO5XUd6jGrmBgdonbvmcwg
Click to expand...
Click to collapse
I can help you out because I was going through the same problem.
Here's the thread to the list of all PRLs (don't worry about it being in the S3 section, they are the same for the Note II): http://forum.xda-developers.com/showthread.php?t=1880781
Also, if you run accross the issue of not seeing the "PRL write" in the ##DATA# menu, you need to go here: http://forum.xda-developers.com/showthread.php?t=2159054 and flash the MA4 zip. I'm running MC2, and it worked for me. Also, there's some tricks to get the prls to stick when you write them. First, name the PRL "TEST.prl" (all caps). Second, turn your data off before doing the prl write.
This is my first post, so give me a thanks if I did any good
My setup:
Sprint Note II LPH-L900
Rooted stock ROM (MC2)
Kernel: Perseus-alpha36
PRL: 55015 (I'm still looking looking around, though)
My final note: I <3 Xposed Framework
Disclaimer: I don't have a clue what I'm talking about. I can't program or read code. I just look up stuff on Google. If this bricks your phone, don't blame me. Make a backup!
Lol I didn't realize Chris already posted the PRLs thread. I figure why not throw in some screenshots of the dialer steps and menu You should see. I also wanted to show off the theme I came up with.
Sent from my SPH-L900 using xda app-developers app
downsouthballa said:
My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
Click to expand...
Click to collapse
I get that a lot when they're working on our towers. Only fix is to wait and keep trying. Sometimes it can last a bit but sometimes it can go on for days. A work around I found was to switch from LTE mode to CDMA and let it reprovision on evdo. On evdo the chances of programming are better. It's weird but it works for me most of the time when ehrpd keeps giving me that error. Also I would like to point out that you're roaming and its just a hunch but maybe you can't update while roaming as you're on Verizon's network and not Sprint's which I think is required to pull ur info from.
Sent from my SPH-L900 using xda app-developers app
Its cool you helped more than I did but if thats true about having issues with updating then that happened to me about twice so far meaning about them working on the tower
chris0160 said:
Its cool you helped more than I did but if thats true about having issues with updating then that happened to me about twice so far meaning about them working on the tower
Click to expand...
Click to collapse
Yea I learned that the hard way.. If you get that error while trying to update your profile or prl a handsfree activation is the worst thing you could do. Was stuck with a non working phone with a phone number of 0000003410 or something like that. The reason why I assume it's tower work related is because the problem is on ehrpd only. Once I switch to CDMA mode the process gets completed whether I'm on evdo or 1xrtt. In OP's case though I think it's roaming related.
Sent from my SPH-L900 using xda app-developers app
I had sprint change my username & I had to reset phone by ##72786# once the phone rebooted i let it run the Hands Free Activation and it worked..
I could swear, like others, that I'm having better results with 55015 than 2000. Time will tell still, but previously i was seeing no network connection far too often, signal bars but no 3G or 4G. Have had constant connection so far since switching to 55015 lat night, and i hope it continues, and i hope i dont have any call/text issues due to 800 mhz band or whatever.
Was such a shame to have such a nice phone with such crappy service!

Categories

Resources