Develop Bugs

Very bad to no signal atall?!!!

Hey guys,
After rooting my evo about 4 months back ive neen through many roms, kernels etc. I have only updated the radio and pri once recently but never touched the winmax but recently ive noticed horrible signal strength sometimes texts wont even go through and im getting around 1-2 bars max no matter if im at or out somwhere.
So my question is what should I do to improve this would updating wimax help? Since ive never updated it since I bought this phone.
Im on cyanogen b2 supersonic mod which I flashed over a nightly because thats what da instructiins said.
Kernel: snap 7.6 turbo
Sent from my PC36100 using XDA App

45 views and no replies????!!!!!!!

if its just recently i would see if any friends have signal issues in the same areas... could be a tower issue.
otherwise i would go back to a stock 2.2 odex (it will jave latest wimax and radio in it.) and see if that helps.
if nothing works... it very well could br your phone.
Sent from my PC36100 using XDA App

Updating the WiMax radio will have nothing to do with your 3G/voice reception. That's a totally separate radio.
+1 on v_lestat's suggestion. See if anyone else is having problems, if they aren't I would try these steps (continuing on to the next if the previous didn't work).
1. Update profile
2. Reset profile in epst ##3282# (Need MSL) Edit Mode>Data Profile>Menu>Restore
3. Experiment with different radios until you find one that works best in your area.

topdawgn8 said:
Updating the WiMax radio will have nothing to do with your 3G/voice reception. That's a totally separate radio.
+1 on v_lestat's suggestion. See if anyone else is having problems, if they aren't I would try these steps (continuing on to the next if the previous didn't work).
1. Update profile
2. Reset profile in epst ##3282# (Need MSL) Edit Mode>Data Profile>Menu>Restore
3. Experiment with different radios until you find one that works best in your area.
Click to expand...
Click to collapse
Thanks for thr reply but can you explain in a little bit of detail like what will the epst do? And whats "MSL" lol
Sent from my PC36100 using XDA App

I saw someone post something today about a program on the market to get your msl. It's called MSL reader and will help you get that. You cannot edit details in the epst without it. If that doesnt' work, you can always call sprint and tell them you need it. There are a couple of threads on here for help if they aren't willing to give it to you.
In the epst you can change things pertaining to your data pofile, wimax settings, and misc advanced settings. DO NOT CHANGE ANYTHING IN HERE UNLESS YOU KNOW WHAT YOU ARE CHANGING. For what you need to do, just reset your user profile and then click OK to restart your phone.

Cricket *228

Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.

bigshotrob22 said:
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
Click to expand...
Click to collapse
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.

PRL
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.

ejdavis72 said:
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
Click to expand...
Click to collapse
I did all that last night with qpst. I am able to get 3G now because I manually updated my PRL to 3220 (or something like that). I have everything working like talk, text, MMS but I cant update through *228. Thanks for your response.

ejdavis72 said:
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
Click to expand...
Click to collapse
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.

bigshotrob22 said:
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
Click to expand...
Click to collapse
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.

ejdavis72 said:
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
Click to expand...
Click to collapse
I updated it but still a no go on the *228 update.

bigshotrob22 said:
I updated it but still a no go on the *228 update.
Click to expand...
Click to collapse
Try *22807 and see if that works.

ejdavis72 said:
Try *22807 and see if that works.
Click to expand...
Click to collapse
Tried that too
Sent from my DROIDX using XDA App

bigshotrob22 said:
Tried that too
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Try this one.

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Ill try it in a bit
Sent from my DROIDX using XDA App

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Didnt work either.

Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App

bigshotrob22 said:
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know

iRage said:
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
Click to expand...
Click to collapse
Yes she had an account previous to her Dinc so after i flashed her phone I called and got the MDN and MIN from cricket and also I gave them the MEID from the DINC..she has service but I just can't get the phone to get the OTA update and like you I've tried at least 30 prl's. Currently I have 32400 prl loaded on her phone with no problems but I know that's not the prl she is supposed to be using. By the way I live in tucson az..Thanks for your reply
Sent from my DROIDX

Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off

iRage said:
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
Click to expand...
Click to collapse
I know that happens when you update and I don't mind that but I just want her to pull the correct prl and eri files.
Sent from my DROIDX

BUMP
Sent from my DROIDX

RESOLVEDD!!!!
bigshotrob22 said:
BUMP
Sent from my DROIDX
Click to expand...
Click to collapse
hey buddy i just noticed that you are from tucson as well!
well let me tell you that i have flashed android phones to cricket (my own) like the evo, droid 1, eris and incredible. ad let me tell you its not as hard as it seems or people make it seem, so here it is! the attached zip file contains OUR NEW NATION WIDE PRL and flashing instructions. you do not need QPST if your phone is already unlocked with 000000 if you dial ##778.
anyways just put the prl on sdcard then dial ##778 then password is:000000
go to PRL>update PRL> then choose the prl i have attached then follow the instructions from step 3 (skip 1, 2) without skipping anything and you should have your web mms set up!!
however if you run to any problems PM me and ill help you or i can either meet up with you here in the southwest of town and ill do it for you.

[Q] 1x problems

my evo when I flash custom roms will always give me 1x instead of 3g icon... not sure why is there a fix of any kind?

Your probably not clearing everything when you flash the rom. Make sure you wipe everything when flashing a new rom.
Sent from my PC36100 using XDA App

I wipe everything 3 times before flash thanks for the advice

jph1282 said:
I wipe everything 3 times before flash thanks for the advice
Click to expand...
Click to collapse
Try going into espt. (you need to be on a sense rom) Enter ##3282#. Go to edit mode (you'll need your MSL number). Select 'evdo', and make sure that the preferred mode is set to automatic. I don't remember if it automatically reboots your phone when you commit the changes, but if not, then reboot it manually after you change it. That may help ya out.

k2buckley said:
Try going into espt. (you need to be on a sense rom) Enter ##3282#. Go to edit mode (you'll need your MSL number). Select 'evdo', and make sure that the preferred mode is set to automatic. I don't remember if it automatically reboots your phone when you commit the changes, but if not, then reboot it manually after you change it. That may help ya out.
Click to expand...
Click to collapse
Good call, only reason I didn't think this was the reason because most roms don't have the icon change when you lose evdo.
Sent from my PC36100 using XDA App

dcmasta said:
Good call, only reason I didn't think this was the reason because most roms don't have the icon change when you lose evdo.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Right, but now that a lot of the Sense roms are incorporating that mod (the mod that shows if your truly on 3g or 1xx), some people are realizing that they aren't getting 3g signal at all. Some may have been on 1x the entire time, but then when they switch to a rom that shows what you're actually connected to, they realtize they're on 1x. That trick works for some people, but not all. I think it'll help out though.

Same 1x problem no matter what i do
Ive had this problem for about 5 months now and it doesnt matter what ROM i switch to or use it the same and going in EPST doesnt fix the problem neither when doing what you just said to do with the epst but when i do change it from AUTOMATIC to HRC it goes back on 3G but the downfall to that is that phone calls and text dont come in to your phone until you make a phone call so can anyone help solve the issue why is this happening? I have a white evo hardwhere 0003 used all kind of roms even stock and same thing and know alot about phones and been messing with them since windows mobile 6.1 HTC TOUCH for sprint soo... And my girls evo is and stays on 3GrevA. her in not rooted and is stock tho while mines is stuck eternally 1xrtt.

swurvv said:
Ive had this problem for about 5 months now and it doesnt matter what ROM i switch to or use it the same and going in EPST doesnt fix the problem neither when doing what you just said to do with the epst but when i do change it from AUTOMATIC to HRC it goes back on 3G but the downfall to that is that phone calls and text dont come in to your phone until you make a phone call so can anyone help solve the issue why is this happening? I have a white evo hardwhere 0003 used all kind of roms even stock and same thing and know alot about phones and been messing with them since windows mobile 6.1 HTC TOUCH for sprint soo... And my girls evo is and stays on 3GrevA. her in not rooted and is stock tho while mines is stuck eternally 1xrtt.
Click to expand...
Click to collapse
you may have facked your radio at some point? I would tinker with different ones till you get the sweet spot.

k2buckley said:
Right, but now that a lot of the Sense roms are incorporating that mod (the mod that shows if your truly on 3g or 1xx), some people are realizing that they aren't getting 3g signal at all. Some may have been on 1x the entire time, but then when they switch to a rom that shows what you're actually connected to, they realtize they're on 1x. That trick works for some people, but not all. I think it'll help out though.
Click to expand...
Click to collapse
This. There may not be anything really wrong at all. I mean, it sucks to drop to 1X, but the stock ROM was lying to you.
Now, if you ONLY see 1X all the time, yeah, that's a problem. But an occasional switch over to 1X (particularly if you're in a tough signal area, like the core of an office building) is normal.

I am on mikG Rom I have had 3g before I updated radios got the new stock rom but at home I use a airwave for signal wonder if that messes anything up?
Sent from my PC36100 using XDA App

jph1282 said:
I am on mikG Rom I have had 3g before I updated radios got the new stock rom but at home I use a airwave for signal wonder if that messes anything up?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Have you tried one of the new Sense 3 roms? The reason I ask...when you go into 'ABOUT PHONE' in settings these versions give you a network option that others do not. Check to see what it is telling you are receiving 1X or evdo. If it says 1X...you may have the same issue I had...borked 3G. Once I got it replaced..I loaded up the 3.0 again just to check what it now said..and you betcha...evdo was now showing and not 1Xrxx (or whatever it was).
I tried everything as well for about three weeks..you name it..ROMS/RADIOS/STOCK/CUSTOM/ESPT even took it back to fully stock and then rooted again (lost my .76Hboot in doing so, but phone didn't work right anyway... I was grabbing for straws. Luckily it was just under the first year and paid the 35 to have it replaced (no warranty plan). I travel and no matter where I went the speeds were terrible..ya..the 1X/3G/EVDO in the notifications bar is just for looks...but you KNOW when your stuck on 1X...frustrating.
This may not be the case....but

kinda of a simple fix... first of all stock sense roms always show 3g even if you dont have it... if on every rom you flash you keep getting the 1x AND you alreeady tried radios, nv etc upgrades and those dont work, then it is your PRL not PRI... 2 different things... to fix it check out a thread under deveopement ..Deck.... cause there is a fix there, or google prl and pri update evo on google.. you will need msl and be on sense and be able to use espt

[Q] 3G not working

Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!

ankurcshah said:
I guess i went into ##DATA# and messed something without my knowledge.
Click to expand...
Click to collapse
You "guess" you messed around with something???
Call Sprint
Sent From My Galaxy10. 1 Class Starship...

I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use

Flashing stock ROM wont reset those settings. You will need to reset the activation on a stock ROM. I'm not sure of the code for that but its been in the treads a few times....
Which would be ##786#.....

Still no avail brother!

ankurcshah said:
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Click to expand...
Click to collapse
Is this device compatible with the 3g service your provider uses?

Yes it is. I have been using for quite a some time now.

Having the exact same issue. Not sure what caused it or how to fix it. I too am on stock rom

ankurcshah said:
Yes it is. I have been using for quite a some time now.
Click to expand...
Click to collapse
Have you contacted your cellular provider? If you changed some settings, most likely calling your provider to get the right settings will be your best course of action.
Sent From My Galaxy10. 1 Class Starship...

Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.

Any help?

We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app

brooksyx said:
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
ankurcshah said:
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Click to expand...
Click to collapse
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
ankurcshah said:
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
Click to expand...
Click to collapse
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Questions:
1. If not how did you get it setup to see their towers???
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
3. If they did, do you still have them and have you tried that???
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
Sent From My Galaxy10. 1 Class Starship...

SouthPhilly said:
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
Yes,currently on el29 one click. but stock kernel without cwm
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
Could you link me?
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Nope, I just needed the dump file for the 3g to work, 3g works on my dad's phone and it doesnt on mine. I use the same dump as his. Still? Wierd
Questions:
1. If not how did you get it setup to see their towers???
I just flashed a prl
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
nope, I had set the msl to 000000
3. If they did, do you still have them and have you tried that???
They are not aware of such a thing also.
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
I tired they don't understand "reprovision radios"
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help

ankurcshah said:
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
Click to expand...
Click to collapse
The reset I mentioned is a "factory reset" ... But like I already posted... It will only delete all of your user data and reset settings like wifi, email passwords...
It won't reset the radios...
If you had already flashed these files to get your phone working when you got it, Don't you still have them???
Sent From My Galaxy Class Star Fighter...

My 2 cents here, not completely sure but I saw this today.
Know your msl
>go to phone enter ##data#
>Click edit
>Then enter msl
>click other
>go into Korea mode
>click on India mode, press okay.
>reboot
Sent from my SPH-D710 using Tapatalk 2

Tried out! No changes takes place. Gonna take the qcn of a friends write it onto my phone,change imsi,meid,mdn and check.
Sent from my SPH-D710 using Tapatalk 2

Were u mentioning the one click thingys? Yes i have tried out every damn thing now.
Now on ics still no 3G
Sent from my SPH-D710 using Tapatalk 2

The one click restore files are for Sprint phones so I doubt if they would work for you

Hmmm,all right
Sent from my SPH-D710 using Tapatalk 2

[Q] Wicked Sensation v2.0 4G Data not working(Sprint GS3)

I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.

10 Post BS
wildcrackshot said:
I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.
Click to expand...
Click to collapse
Well I guess this is what I get for having to deal with this 10 post rule. This would be so much better if I could just ask my question in the Rom's thread so people would ACTUALLY SEE IT!!!!!

Have you tried resetting you data? ##786#..
Edit: you will need your msl #..
http://i.imgur.com/8KP7ZJx.png

wildcrackshot said:
Well I guess this is what I get for having to deal with this 10 post rule. This would be so much better if I could just ask my question in the Rom's thread so people would ACTUALLY SEE IT!!!!!
Click to expand...
Click to collapse
Just keep replying :good:
Sent from my PG06100

Try this and let us know if it worked
ImEVO said:
Have you tried resetting you data? ##786#..
http://i.imgur.com/8KP7ZJx.png
Click to expand...
Click to collapse
Sent from my SPH-L710 using xda premium

MSL#
jonapunk said:
Try this and let us know if it worked
Thanks for the replies all. I have done the suggested troubleshooting as follows
1: did a fresh install of the ROM (after wiping EVERYTHING first)
2. went through setup of the device (just to verify 4G was still not working, which it was not)
3. went to dialer and input ##486#
4. chose the reset option
5. entered my MSL # and then the phone did a factory reset.
When the phone came back up I had to go through the setup again, and had to turn on wifi to get through it because the data was still not working.
Also if anyone comes accross this and wants to know how to get the MSL # download a terminal emulator from the market and input "getprop ril.MSL"
Or check out this thread - http://forum.xda-developers.com/showthread.php?p=28182339
Also while investigating the MSL further I found this possible solution-
"The phone needs to be re-provisioned as follows ##72786# or ##SCRTN# the phone may restart twice, after the restarts, launch a browser and type in your phone number on the prompt."
After following this, when I opened the browser I was not prompted to input anything I was only greeted with a connection error. :crying:
I am still searching for more answers. I am exploring ##DATA# but there is more in here than I am familiar with so I will hold of on this until I know what I am doing.
In the mean time 3G works so I am still able to use my phone just wish I could tether my 4G to my laptop.
Any other ideas are more than welcome.
Wild
Click to expand...
Click to collapse

Well, I just flashed v1.3 and it is working flawlessly, everything is working great. I just think my hardware version is conflicting with the latest v2.0 for some reason. I am out of ideas. I'll stay on v1.3 for now I guess.
Sent from my SPH-L710 using xda app-developers app

I have had the same exact issue and have not found a fix yet. It only happens with certain roms.

wildcrackshot said:
I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.
Click to expand...
Click to collapse
Tha'ts weird, I just checked mine and it says global network. I switched it toe CDMA LTE and it works. Even sent a test text message to the wife phone and have no issues.. O here might be the issue. If you go to ##3282# under view then advance, see if LTE is enabled or disabled.. If it is enabled then I bet that is why you do not get 4G service.. I believe LTE does not have 4G service just 3G.. I have done this and my 4G went to 3G after enableing it.. If you have it disabled you will get 4G service..

That is a good idea but even then you have to wait five min. inbetween lol why couldn't I remember my old login that would be way easier
Sent from my SPH-L710 using xda premium

Well I have finally been able to get 4G data working on v2.0!!!
1. Wipe EVERYTHING
2. Flashed sensations v1.3
3. Reboot phone into recovery
4. Flashed v2.0
5. BEFORE REBOOTING OUT OF RECOVERY, Flash latest sprint radios
6. Reboot phone one last time
This has made 4G data work for me.
Im in the car right now, will try to remember to post a link to the latest radios. And PRL Updates. Those are nice to have too.
Sent from my SPH-L710 using xda app-developers app AND 4G FROM SPRINT

jjerome1979 said:
That is a good idea but even then you have to wait five min. inbetween lol why couldn't I remember my old login that would be way easier
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
What are you talking about?
Sent from my SPH-L710 using xda app-developers app

This is what I did and it seemed to work. I switched to cdma only then update profile and prl. Then when I switched back to cdma/lte everything seemed to work fine.