Develop Bugs

[Q] edit epic 4g wimax realm for clear/clearwire?

i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!

eigerzoom said:
i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
Click to expand...
Click to collapse
What is the benefit of this>?

you can read all about it in the evo 4g forums
however the issue here (or at least for me) is
I can't find where to edit the realm on the epic

its not the data profile username?
[email protected]?
i tried changing that with the [email protected]
i still got the sprint wall
where do i change the realm on the epic...uhg

http://forum.xda-developers.com/showthread.php?t=780742&highlight=cricket

found it...so dumb...
to change wimax realm enter ##data# but hit 'view' (i kept hitting 'edit')
then wimax will be in the list
wimax will then request your msl if pressed
the realm can be found there and edited with a long press
now i'm stuck at the final step
i may be wrong but i believe the wimax should have its own NAI
and that changing the normal data profile NAI to [email protected] doesn't do anything
because i'm still not getting the Clear wall
and of course our phones are enough different from the evo that NAI couldn't just be right there to be easily edited...
maybe i'm wrong...but its still not working for me
wimax debug mode is still showing sprint as my provider...so i'm 98% sure i haven't found the correct NAI to edit
more uhg

I changed my realm and found that I am definitely getting a clearwire IP, and all http traffic gets redirected to clearwire's site. Definitely a good step in the right direction at any rate.

for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding

eigerzoom said:
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
Click to expand...
Click to collapse
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.

redsox19asb said:
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
Click to expand...
Click to collapse
Did you just change Realm and profile? there is a clearwire tower right in front of my neighborhood. I get directed to home.clear.com

Just tested at home... Sprint 4G @ 2.5mbps down vs Clear @ 7.25mbps down. Definitely a difference. I only changed the WIMAX Realm, nothing else. The clear also seems more reliable. On Sprint it will constantly drop and re-search for the 4G connection.
FYI both have uploads that hover around 1.0mbps.
Sent from my SPH-D700 using XDA App

I only seem to be able to get home.clear.com as well...was there anything else besides the realm that you changed?
Sent from my SPH-D700 using XDA App

No dice in changing from sprint to clear realm. Redirect to clear.com page all the time. I changed it back to sprint.

I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk

Awesome thank you! This worked for me! I couldn't get 4g to work at work and now it works on the clear realm, can't wait to test it at home tonight to see if it's better or worse than sprint's realm (or if there is any difference at all).

rangerover_95 said:
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.

JOLTnPEST said:
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
Click to expand...
Click to collapse
I did, just a case of inexperience..... I didn't realize it was so straightforward. I am new to Android, so I'm learning as I go. Hell, at least I didn't start a new thread. Lol. Thanks again, I'm going to try this out
Sent from my SPH-D700 using Tapatalk

Meh, I just tried switching my realm to clearwire-wmx.net with no results, unfortunately. I guess I will just have to wait for better coverage to be available in east portland......
Sent from my SPH-D700 using Tapatalk

Keep getting that clear.com redirect, going back to sprintpcs.com

Can anyone else who changed comment if they are able to browse sites or do you get directed to clear.com?

Cricket *228

Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.

bigshotrob22 said:
Hello I recently flashed my wifes phone to cricket but I cannot update through *228..i was able to get internet working but with only 1x. I was wondering if anybody knows how I can update it and to get 3G. Thanks in advance..
Sent from my DROIDX using XDA App
I was able to get 3G but I still cannot update with *228. I loaded 3220.prl.
Click to expand...
Click to collapse
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.

PRL
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.

ejdavis72 said:
Try ##778# on your dialpad then go into the Security settings and under HDR AN Auth and PPP USER ID and S.IP DUN Username, make sure they are set to "[email protected]" and under HDR AN Passsord and PPP PASSWORD make sure it is "cricket".
Check the M.IP Default Profile too. make sure NAI and DUN NAI is set to "[email protected]" and under HA Shared Secret and AAA Shared Secret, they are set to "cricket"
Under M.IP Settings make sure the Number of profiles is set to "1" and the Active User Profile Index is set to "0" and the MIP MODE is set to Simple IP Only.
Try that and see if it works.
Click to expand...
Click to collapse
I did all that last night with qpst. I am able to get 3G now because I manually updated my PRL to 3220 (or something like that). I have everything working like talk, text, MMS but I cant update through *228. Thanks for your response.

ejdavis72 said:
And also, you can try this PRL, it is the Cricket Nationwide Roaming EVDO PRL. it should work for the OTA (*228) Programming. But remember that you must check the EPST Settings under "security" and "M.IP Default Profile" after you OTA cause they will revert back to Verizon settings. Sometimes you have to *228 more than once to get it to work.
I had to zip the PRL, so just extract it and then put it on your SD card and update your PRL with it.
Click to expand...
Click to collapse
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.

bigshotrob22 said:
Ok thanks. I was looking for that PRL. I had the same issue with my ERIS after I would update (*228) everything would revert back to vzw. I appreciate your help.
Click to expand...
Click to collapse
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.

ejdavis72 said:
No problem! Hope it works for ya! I posted these things over in Token's Cricket ROM section in response to you question over there too. Maybe it will help some of them with the same problems.
Click to expand...
Click to collapse
I updated it but still a no go on the *228 update.

bigshotrob22 said:
I updated it but still a no go on the *228 update.
Click to expand...
Click to collapse
Try *22807 and see if that works.

ejdavis72 said:
Try *22807 and see if that works.
Click to expand...
Click to collapse
Tried that too
Sent from my DROIDX using XDA App

bigshotrob22 said:
Tried that too
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Try this one.

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Ill try it in a bit
Sent from my DROIDX using XDA App

ejdavis72 said:
Try this one.
Click to expand...
Click to collapse
Didnt work either.

Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App

bigshotrob22 said:
Anybody have other ideas? I've loaded many prl files but still can't update my wifes phone ota.
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know

iRage said:
Hey man what's going on. Guess I've been a member here for long enough that I've gleaned far more than enough information and software from here that it's time I start posting and helping out others myself.
I am 99% I know how to solve your problem since I talked my brother out of his brand new HTC Droid Incredible a few days ago and I ran into the same problem as you at one point but as of approximately 6hrs ago I can happily tell you I have fully flashed my Dinc to the Cricket network here in Reno, Nevada with a PayGo Unlimited account for which I pay $40 a month and I am now able to do the *228 update after 3 days of trying and failing no matter how many bajillion (seemingly heheh) different prl's or other things I tried. (rofl I got like 40 cricket prl files now, maybe I should make my own site just for cricket prls lol)
Now, you say you flashed your wife's phone to cricket. Tell me did she already have a cricket account from which you are using the MDN and MIN to program her Dinc with? If something like this is the case then I am wondering if you have tried dialing 611 and talking to a cricket rep to have them change the MEID on the account to the MEID of the Dinc?
Let me know
Click to expand...
Click to collapse
Yes she had an account previous to her Dinc so after i flashed her phone I called and got the MDN and MIN from cricket and also I gave them the MEID from the DINC..she has service but I just can't get the phone to get the OTA update and like you I've tried at least 30 prl's. Currently I have 32400 prl loaded on her phone with no problems but I know that's not the prl she is supposed to be using. By the way I live in tucson az..Thanks for your reply
Sent from my DROIDX

Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off

iRage said:
Well then I wouldn't worry about it too much tbh. When I did the ota it just screwed all my settings up. I lost 3g wap and mms and had to go through and fix it all over again lol. Pissed me off
Click to expand...
Click to collapse
I know that happens when you update and I don't mind that but I just want her to pull the correct prl and eri files.
Sent from my DROIDX

BUMP
Sent from my DROIDX

RESOLVEDD!!!!
bigshotrob22 said:
BUMP
Sent from my DROIDX
Click to expand...
Click to collapse
hey buddy i just noticed that you are from tucson as well!
well let me tell you that i have flashed android phones to cricket (my own) like the evo, droid 1, eris and incredible. ad let me tell you its not as hard as it seems or people make it seem, so here it is! the attached zip file contains OUR NEW NATION WIDE PRL and flashing instructions. you do not need QPST if your phone is already unlocked with 000000 if you dial ##778.
anyways just put the prl on sdcard then dial ##778 then password is:000000
go to PRL>update PRL> then choose the prl i have attached then follow the instructions from step 3 (skip 1, 2) without skipping anything and you should have your web mms set up!!
however if you run to any problems PM me and ill help you or i can either meet up with you here in the southwest of town and ill do it for you.

So Far Signal's Been Great!!!

Dont want to jinx it but after a loooong day of dealing with 3g going on and off, and after speaking with sprint a cpl of times, aaaaand (i think this is what helped a lot) after manually programing my phone with my mdn and msid ive been getting great 3g connections.....
like i said, hopefully i dont jinx myself (knocking on wood!!!) lol up to now after half a day of testing it out, my 3g has not gone away, even after connecting to wifi... hope if it does continue, it can be the solution for a lot of ppl....
just reporting so that ppl are aware and may help them too....
DETAILS:
- called sprint up and had them refresh my account
- you might need your msid for later so ask for that info when talking to a rep (mdn is your phone number; sometimes your msid is the same as your number)
- after "getting 3g to work", i updated the profile and the prl (if not done already by the rep)
- then dial ##(your msl here)# and then press edit
- input the mdn and the msid
- press ok and the phone will reboot
and thats it, thats all i did and up to now its been working great.... hopefully this does continue and fix the problem!!!

any details?

ericizzy1 said:
any details?
Click to expand...
Click to collapse
sorry, will update first post with more details....

UPDATE: I thought this was a legit fix but I guess not, I had data loss again! Bummer!!! :/

are you rooted?
Ive had no data issues whatsoever

Success100 said:
are you rooted?
Ive had no data issues whatsoever
Click to expand...
Click to collapse
na im not rooted!

[Q] quick 3g question.

Having an issue with my 3g service not working. didn't do anything special with anything on my phone, it just stopped at some point this morning. I was running mikg v3 b1 with aggressive freedom, v6 scripts (options 7 and 20 selected) and the 3g tweak from zeppelinrox (fastest setting). I tried reflashing the kernel, flashing more freedom kernel, putting the phone into airplane mode and back, and now I am restoring a backup in which 3g was working to see if that fixes the problem. Aside from the usual answer of try reflashing the rom or reflash the kernel could anyone offer any advice as to what I could possibly try next if this nandroid restore doesn't work? Thanks so much in advance for helping me to solve this problem.

Have you tried updating through the ROM's setting?
Try to update your prl and profile and maybe that'll do it.
Report back and if it doesn't work we'll try some other things ...
~ I'm a fungi

a senile fungus said:
Have you tried updating through the ROM's setting?
Try to update your prl and profile and maybe that'll do it.
Report back and if it doesn't work we'll try some other things ...
~ I'm a fungi
Click to expand...
Click to collapse
No dice on the updates. Sprint says everything is hunkey dorey but I smell a rat. What other options are there. Btw, my nandroid restored to mikg 2.61, aggressive freedom.
Edit: 4G seems to work fine fyi. For some reason 3g will not come on.
Sent from my modded mikG Evo... It's easier this way.

First go into your settings, wireless and networks and check and see if your mobile connection is checked on. I kno it sounds simple but check anyway.
If that's not it, get msl reader off the market its free, you need to be rooted, copy your msl code down. If your not rooted you need to call Sprint and they'll give it to you.
If youGo to the dialer and press ##3283# edit mode, profile, hit the menu button, and press restore when it pops up. Your phone should restart, if it doesn't turn it off. Turn it back on if it didn't shut down automatically. Let it do its thing, when the prl update pops up cancel it. See if your 3g comes back. You can update profile and prl if you'd like after this process. I hope this helps
Sent from my PC36100 using xda premium

twiztidvandal417 said:
First go into your settings, wireless and networks and check and see if your mobile connection is checked on. I kno it sounds simple but check anyway.
If that's not it, get msl reader off the market its free, you need to be rooted, copy your msl code down. If your not rooted you need to call Sprint and they'll give it to you.
If youGo to the dialer and press ##3283# edit mode, profile, hit the menu button, and press restore when it pops up. Your phone should restart, if it doesn't turn it off. Turn it back on if it didn't shut down automatically. Let it do its thing, when the prl update pops up cancel it. See if your 3g comes back. You can update profile and prl if you'd like after this process. I hope this helps
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Thanks. Did all of that with Sprint on the phone. They put out an outage ticket because the tech felt that service may be down in my area. A few others with Sprint at my job have also reported problems today. I'll have to wait and see when u get off of work and out of the area to see if its sprint's problem or my phone. I'll update as soon as I find out. Thanks guys for being so willing to help! Much appreciated.
Sent from my PC36100 using Tapatalk
Edit: SPRINT SERVICE SUCKS. Don't even know when they have an outage. Thanks for all of the direction though. Mucho gracias!

[Q] Can't get Epic flashed to virgin >:(

I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...

michael.hooboob said:
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
Click to expand...
Click to collapse
We are going to need more info then that. Your AAA and HA user name name and password have nothing to do with getting calling to work just data. Make sure you entered the correct meid in QXDM and that u also put in your phone number and mdn as well in qpst.
Sent from my SPH-D700 using XDA App

i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to <not set>.
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.

michael.hooboob said:
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to .
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
Click to expand...
Click to collapse
First of all delete that!!!
And secondly try to use dfs cdma instead of qpst.
Edit: looks like u Xed out the important stuff.
Sent from my SPH-D700 using XDA App

I always re-input all qpst data, including passwords, each time I use it to avoid possible data corruption, as well as going to ##DATA# and viewing the starred passwords there.
Sent from my SPH-D700 using xda premium

i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.

michael.hooboob said:
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
Click to expand...
Click to collapse
That's good info for someone on a intercept. I just went ahead and stuck with the adb log method to blanket cover all who may not be using an intercept phone.
Sent from my SPH-M910 using xda premium

okay, so i tried reflashing all settings for my data to work, but i still can't even get 1x......
my settings are IDENTICAL to this guy's -- http://forum.xda-developers.com/showpost.php?p=23117907&postcount=281
a little stumped to be honest, any ideas?

Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....

michael.hooboob said:
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
Click to expand...
Click to collapse
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium

Shinydude100 said:
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Lol I feel like if people just followed the tutorial they would have 0 problems. Once u get all the needed keys and what not the epic is a breeze to flash.
Sent from my SPH-D700 using XDA

I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?

michael.hooboob said:
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
Click to expand...
Click to collapse
Start over fresh? Why Certainly! Odin EL30 Stock Tar. Have Repartition checked and make sure you have efs clear selected as well.
WARNING!!!! EFS clear is going to wipe that phone clean, you'll have to re-input the ESN (I think) and prl, etc. Least that's what I believed happened to me last time I did an efs clear.
Sent from my SPH-D700 using xda premium

i will do that once i am off work!
you guys are a lot of help, and i appreciate it.
i just want to start off fresh because i was about half asleep when i entered all the numbers in and i'm about 99.5% positive i funked up a number somewhere that shouldn't have been effed with.... i'll let you know if it works!

well! reflashing to stock fixed my problems.
followed your guide and entered all the settings verbatim.
the 3g icon is up, data is working .....very slowly.
this leads me to believe that it's not actually 3g and just 1x.
according to mobile speed test i'm going at about dial up speeds (not even 1x) with 3 bars of service.
any idea??
got it!
it just fixed itself when i cycled data mode on and off, thanks guys!
getting solid 1 mbps downloads with half that for uploads in my area of NE!