I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
michael.hooboob said:
I swear, i've done it all. I've flashed the donor intercept's "numbers" if you get what i'm saying....
got my AAA and HA passwords,
got my username and all that info inputted in QPST, wrote to phone,
phone restarted.......
*me getting excited*
open dialer on epic to make a test call...
rings once and then "YOUR ACCOUNT COULD NOT BE VALIDATED!"
checked settings, rechecked settings,
is there some type of provisioning i have to do?
do i need to call customer service and "refresh" my data...
the intercept still works fine, too...
Click to expand...
Click to collapse
We are going to need more info then that. Your AAA and HA user name name and password have nothing to do with getting calling to work just data. Make sure you entered the correct meid in QXDM and that u also put in your phone number and mdn as well in qpst.
Sent from my SPH-D700 using XDA App
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to <not set>.
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
michael.hooboob said:
i got calling/texting to work, finally....
my msid was different than my actual phone number and i didn't realize that.
changed it in ##msl# and voila, calls and text!
now i just can't get that data working, i've manually entered all the usernames and such in ##data# but that didn't work.
so i went the route of using qpst, data still doesn't work.
weird quirk though is that it seems the settings in qpst aren't sticking maybe? i'll write the PPP box to phone and then when it boots i'll read it to make sure it's right, but it will be gone.
Additionally when i try to input the correct settings in the advanced tab on ##data# i cannot get them to save. I'll exit data programming mode and it will all just change back to .
that may have some problems with it.. i can try flashing a sprint rom again to reset the data settings to start fresh maybe?
again i appreciate any help you can give me because i've been working on this for damn near 4 days!!!!
edit: i've attached my list of important things to have while programming, most of which was pulled from data programming on intercept.
i trust that you won't try to steal any of my number and what not, if it's possible.
Click to expand...
Click to collapse
First of all delete that!!!
And secondly try to use dfs cdma instead of qpst.
Edit: looks like u Xed out the important stuff.
Sent from my SPH-D700 using XDA App
I always re-input all qpst data, including passwords, each time I use it to avoid possible data corruption, as well as going to ##DATA# and viewing the starred passwords there.
Sent from my SPH-D700 using xda premium
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
michael.hooboob said:
i'll give it a try now,
another weird thing i found is that if you want your AAA password just open up ##data# on the intercept and click on the password like you're editing it, long press it and hit select all, and then turn the phone sideways like landscape mode and you can see the passwords in plain text! that's how i got mine anyways... seemed easier than reading through the adb log.
edit: TO BE CLEAR that way of getting the AAA password ONLY works on the intercept running 2.2 STOCK. It may or may not work for you, if it works for you then we can probably assume it will work for others who have problems with adb like me.
Click to expand...
Click to collapse
That's good info for someone on a intercept. I just went ahead and stuck with the adb log method to blanket cover all who may not be using an intercept phone.
Sent from my SPH-M910 using xda premium
okay, so i tried reflashing all settings for my data to work, but i still can't even get 1x......
my settings are IDENTICAL to this guy's -- http://forum.xda-developers.com/showpost.php?p=23117907&postcount=281
a little stumped to be honest, any ideas?
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
michael.hooboob said:
Okay, so if i change my data username in ##DATA# to [email protected] i can get 3g to flash on/off intermittently and i can get steady 1x. problem is that the icon is there but there but i can't actually go to any websites. i'll open the browser and the arrows will light up like it wants to work but no.
if i change it back to mdata.vmobl.com i lose the 1x icon and 3g and back to nothing...
i dont get it....
Click to expand...
Click to collapse
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Shinydude100 said:
#1. Follow the tutorial.
You'll notice you're suppose to program it with software, not just trying to enter at ##DATA#
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Lol I feel like if people just followed the tutorial they would have 0 problems. Once u get all the needed keys and what not the epic is a breeze to flash.
Sent from my SPH-D700 using XDA
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
michael.hooboob said:
I did the tutorial exactly, but my data wouldn't work. So I tried manually in ##data#.
Is there a way I can just start over fresh?
Click to expand...
Click to collapse
Start over fresh? Why Certainly! Odin EL30 Stock Tar. Have Repartition checked and make sure you have efs clear selected as well.
WARNING!!!! EFS clear is going to wipe that phone clean, you'll have to re-input the ESN (I think) and prl, etc. Least that's what I believed happened to me last time I did an efs clear.
Sent from my SPH-D700 using xda premium
i will do that once i am off work!
you guys are a lot of help, and i appreciate it.
i just want to start off fresh because i was about half asleep when i entered all the numbers in and i'm about 99.5% positive i funked up a number somewhere that shouldn't have been effed with.... i'll let you know if it works!
well! reflashing to stock fixed my problems.
followed your guide and entered all the settings verbatim.
the 3g icon is up, data is working .....very slowly.
this leads me to believe that it's not actually 3g and just 1x.
according to mobile speed test i'm going at about dial up speeds (not even 1x) with 3 bars of service.
any idea??
got it!
it just fixed itself when i cycled data mode on and off, thanks guys!
getting solid 1 mbps downloads with half that for uploads in my area of NE!
Related
When i tried to make a call this morning my calls wouldnt go through. i wouldnt get calls either. i would also get these error messages when sending texts. Unable to send/receive a text message.
SMS Error
Radio Interface Resource Shortage
Details
Cause Code:64
Error Class:2... my phone was perfectly fine yesterday. i would also get stuck on the call screen when i end a call. could this be on sprints end?
It happened to both my wife and I, try updating your PRL that's what trying to update.
updated but its still getting some sms errors and some calls are still not getting thru
I'm in Myrtle Beach right now and it's terrible. Calls take about a minute to go through and texts won't send. Data browsing is painfully slow also.
are you rooted? and do you have a X over your signal bars?
yeah same here and calls are going to my voice mail. instead of the sms error it says network not responding.
yeah im rooted. my signal goes in and out. i update prl and reboot and everything works for about five minutes and then everything goes wonky
If you know your MSL number if not search the market for " msl reader " then go to your dialer and type in ##3283# then press edit mode, type in your msl number/ password then press date profile, press menu, and hit restore ( don't worry this won't erase anything ) let it do its magic .
theres two options when i go into edit mode. mobile directory number and msid. which one do i edit?
Once you're in Edit mode, go to data profile and just hit your menu button and select Restore. and let it reboot and it should set up your data like new without you losing any of your settings.
http://www.jaxbeachtech.com/content/sprint-evo-4g-data-reset-procedure
Nothing comes up when i do ##3283#.
I think you have to be running a sense rom but I am not entirely sure.
Sent from my PC36100 using XDA App
i am running sense. nothing seems to be working
It is ##3282# (##data#) press edit mode and restore
Sent from my PC36100 using XDA Premium App
killakarl said:
It is ##3282# (##data#) press edit mode and restore
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
i just went thru all that and still not working.
What rom are you running? EPST only works on sprint based sense roms
Sent by supersonic!
imheroldman said:
What rom are you running? EPST only works on sprint based sense roms
Sent by supersonic!
Click to expand...
Click to collapse
calkulins evio 2. i did ##data# but i still get errors. and for sms i still get the radio interface resource shortage
Epst might be broken... Had you used it before? Might want to re-flash...
Also, check this out: http://forum.xda-developers.com/showthread.php?t=715485
Radio updates!
Sent by supersonic!
imheroldman said:
Epst might be broken... Had you used it before? Might want to re-flash...
Also, check this out: http://forum.xda-developers.com/showthread.php?t=715485
Radio updates!
Sent by supersonic!
Click to expand...
Click to collapse
could it be on sprints end?
Maybe... Not sure...
What radio, prl and pri are you using? Check under settings, about phone
Sent by supersonic!
Does anyone have a good link or how-to for manually programming the Incredible? My phone won't call/text/connect to mobile network, but everything else (wi-fi, GPS, all apps) work fine. I think manually programming could fix it, but it seems like some murky territory if you're not absolutely sure what you're doing
Set up only involves you dialing *228 and follow the prompts to either activate a phone or update your roaming. I believe the only other activation method involves Verizon doing this in store.
It depends on what Rom you are using and what EPST but I can type ##000000# and able to change MSN and MSID(MIN). Then I can also type ##PRL#, 000000, which allows to update the PRL. With this Voice and Text should work. Only other thing that might need updating is SID which I found after typing ##DATA#, edit, 000000, in Advanced.
Again, it depends on the version of EPST you have on the phone.
The other way to manually program would be using QPST on your computer and typing ##DIAG# on the phone.
Finally some roms require to press Call after the # codes.
Sent from my Droid Incredible using Tapatalk
SlimSnoopOS said:
Set up only involves you dialing *228 and follow the prompts to either activate a phone or update your roaming. I believe the only other activation method involves Verizon doing this in store.
Click to expand...
Click to collapse
I tried to program it with *228 but my phone couldn't even connect to the network to do that. It can't connect a call at all.
Flagmax said:
It depends on what Rom you are using and what EPST but I can type ##000000# and able to change MSN and MSID(MIN). Then I can also type ##PRL#, 000000, which allows to update the PRL. With this Voice and Text should work. Only other thing that might need updating is SID which I found after typing ##DATA#, edit, 000000, in Advanced.
Again, it depends on the version of EPST you have on the phone.
The other way to manually program would be using QPST on your computer and typing ##DIAG# on the phone.
Finally some roms require to press Call after the # codes.
Sent from my Droid Incredible using Tapatalk
Click to expand...
Click to collapse
I'm on MIUI, but I could definitely flash back to the stock RUU before attempting
JohnSmith1818 said:
I tried to program it with *228 but my phone couldn't even connect to the network to do that. It can't connect a call at all.
I'm on MIUI, but I could definitely flash back to the stock RUU before attempting
Click to expand...
Click to collapse
Gotcha. To add, you must perform *228 while on a Sense ROM then revert back to AOSP. I'm not sure if you did that or if that would help in this case. That said, FlagMax's magic is way more in depth.
You mind my asking, when and how did this issue arise?
SlimSnoopOS said:
Gotcha. To add, you must perform *228 while on a Sense ROM then revert back to AOSP. I'm not sure if you did that or if that would help in this case. That said, FlagMax's magic is way more in depth.
You mind my asking, when and how did this issue arise?
Click to expand...
Click to collapse
I had unrooted and flashed back to stock RUU when I tried the *228. Still didn't work.
Was a very strange situation. Phone was workign fine Saturday night when I went to bed. When I woke up Christmas morning, the screen wouldn't turn on and there was no LED indicator when I plugged it into a charger. I pulled the battery a couple times, but it wouldn't turn back on until I had pulled the battery and wiped the contacts off. After it booted back up, I wasn't able to call/text, but could still connect to mobile internet and wi-fi. I figured it was just terrible reception at my parents' house, but on the drive back the next day I lost mobile internet too and wasn't able to do anything with it since.
No clue what happened... but it all started with that battery problem. Go figure.
that's exactly the same as my problem.
I experienced a few reboots on the past week and suddenly it disconnected from network.
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
Do you have a nandroid of the ROM you can restore to see if that will bring back 3g? If not then it's something else.
idid try a nandroid and i didnt work i tried ruu and that didnt work either
deriq4251 said:
idid try a nandroid and i didnt work i tried ruu and that didnt work either
Click to expand...
Click to collapse
It's probably something outside of the ROM settings. I don't think a lot of us are familiar with metro but maybe see if someone in the land of googles has had that issue and a fix.
I'd almost say re-flash to metro but I don't recommend it as I'm not sure what the flashing to metro involves.
thats what someone else told me , but i wanted to check around here first . thanks
Some Stock Plus roms have a bad habit of changing the active profile on your phone, and each time you change it and are forced to restart for the changes to take effect, it reverts to the wrong profile after it restarts.
1. to fix it, wipe and flash a Sense rom that worked for you before.
2. go to profile settings using one of those ## shortcuts, I think it is ##data# or ##Debug#, don't remember exactly.
3. Go to Profiles and change the active profile from 0 to 1 or the other way around. (don't remember which is the right profile)
4.Restart and make sure 3G works.
5. Flash your favorite rom that doesn't mess the profiles up.
deriq4251 said:
okay i have a droid incredible that has been flashed to metro and it was working great and had insanely fast 3G but after trying to flash a rom i noticed mobile data said turning on but took a while then it said 1x and now it wont go back to 3g at all and i tried to update the prl but it didnt work . is there anyone else who experienced this or knows how to fix it ?
Click to expand...
Click to collapse
If you find the solution please post it here. I'm in the same boat I have a incredible flashed to metro and everything works. Problem is that I only get 1x. That's on the stock sense and cm7 which I currently use. I've tried prls 3022-3026 and nothing works and I live right outside Detroit so I should get 3g
Sent from my ADR6300 using xda premium
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
deriq4251 said:
i've tried ##Debug# but i dont know how to get to profiles and when i was on QPST i noticed i only have profile 0 ??
Click to expand...
Click to collapse
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
cmlusco said:
PST is ##778# hit dial choose edit mode and enter six zeros 000000 as the password. The M.IP Settings and M.IP default profile (profile 0), are the settings for data. Make sure everything looks correct in there. M.IP Customer profile 1 (profile 1), may be used with metro, i am not sure, and am not familiar with metro.
Click to expand...
Click to collapse
I tried everything in this thread and still no go damn guess I'm stuck with 1x until I get my SGS 2 and move to T-Mobile monthly
Sent from my ADR6300 using xda premium
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
deriq4251 said:
Ok I tried everything now I have no data
Sent from my ADR6300 using XDA
Click to expand...
Click to collapse
Where do you live and what ROM were you on when you had 3g working
Sent from my ADR6300 using xda premium
I live in Florida and I was using stock Rom then I tried 3.5 Rom then ics Rom all was good then I don't know what Rom but one of them it said 1x now I have none
Sent from my ADR6300 using XDA
Google metropcs flashing solution Droid incredible
There is a tutorial that tells how to get internet working, that's how I got 1x. I just got my esn added to metro then used that website to get internet and mms working.
Sent from my ADR6300 using xda premium
If someone could use the QPST software to make a backup of what the e4gt has inside the device.. since i flashed a file in the wrong slot of odin i have had so many problems.. currently my phone can make phone calls, text(no MMS) and connect to 4g but if i dont have 3g. it also says it needs to be activated yet i can still receive and make calls. i think it is something i did with qpst when i had to put the meid numbers back into the phone and somehow changed some other stuff.. you can remove any personal info(phone number, username, etc) but i just need to know what to do to get this back working properly.
i thought about using a pit file in odin but not sure if that would even help in my situation.
ok so just got finished talking to sprint and got my msid and msl back to what they were supposed to be. now i just need to figure out what else i changed in qpst. if someone could use qpst and save the file from there phone(take out msl, msid and phone number) then i could just put my information there and be good to go... PLEASE SOMEONE HELP ME do this
Try updating profile usually any problems with connecting to the network or the I'd of your phone to the network will be fixed. I if not review your steps on what you did in qpst and try to find out what you may have changed.
Sent from my SPH-D710 using XDA
No nees to pit.
I swear I responded to this already. Hm.
What does settings/about_phone/status say your MSID is. It may be the problem. If it is not a number clise to your phones number call sprint and ask for it. They will tell you how.
Other options: a reprovision, as suggested.
##72786# is a DSA reset. It may help force a reprovision.
If all else fails, back up EVERYTHING and do a ##786# as a last resort. It will work, but has risks.
You will need your MSL for my suggestions unless you make an anycut/nova/apex activity shortcut to com.android.sprintmenu/ SCRTN (i think. Its the only one that looks like that)
Good luck
Sent from my SPH-D710 using xda premium
well i think my problem may be that my msl is 0000000... should i call and get the msl from sprint and then change it with qpst?
kicker07cvr said:
well i think my problem may be that my msl is 0000000... should i call and get the msl from sprint and then change it with qpst?
Click to expand...
Click to collapse
Wait, do you mean your Msid?
I dont think your MsL CAn be 000....
Interesting.
Did you look from terminal mode with
su
getprop ril.MSL
?
kicker07cvr said:
well i think my problem may be that my msl is 0000000... should i call and get the msl from sprint and then change it with qpst?
Click to expand...
Click to collapse
Thats usually the default.. i used 000000 as my msl in qpst to flash prl 11119. If not theres an app on the market and other ways to get your real msl.. the guy above was speaking about your MSID.. sometimes its the same as your number but a lot of times different.. but if your msid is wrong on the device it will cause all kinds of problems
Sent from my SPH-D710 using XDA
elliwigy said:
Thats usually the default.. i used 000000 as my msl in qpst to flash prl 11119. If not theres an app on the market and other ways to get your real msl.. the guy above was speaking about your MSID.. sometimes its the same as your number but a lot of times different.. but if your msid is wrong on the device it will cause all kinds of problems
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Guess Im the odd duck, as usual... My MSL hasnt ever been close to 0 or my number. Lol
Sent from my SPH-D710 using xda premium
Edit: I misread you the first time.
Sahn-J said:
Guess Im the odd duck, as usual... My MSL hasnt ever been close to 0 or my number. Lol
Sent from my SPH-D710 using xda premium
Edit: I misread you the first time.
Click to expand...
Click to collapse
Again the person stated could be MSID.. im not talking about tye MSL.. MSID/MIN is a ten digit number.. its needed to provision the phone correctly.. if he messed up his MSID/MIN in QPST then he needs to find his and correct it..
MSL is like a SEC or sublock code needed for the device to change certain things.. default is normally 000000. If that doesnt work you need to retrieve it from the device or from sprint. I dont think he could have wrote a prl to tye device if he didnt have the correct MSL thus he probably did something else wrong.
Sent from my SPH-D710 using XDA
Yeah ( i know, thats why I said he should check it. )
ADD: If it is MSID he could get it frim Sprint if he doesnt have it,
then, assuming a stock dialer, could ##(puthisMSL)# and enter MSID manually.
Is MSID one of the ten thousand number sequences on the box¿
I think its MAC, MEID etc
Sahn-J said:
Yeah ( i know, thats why I said he should check it. )
ADD: If it is MSID he could get it frim Sprint if he doesnt have it,
then, assuming a stock dialer, could ##(puthisMSL)# and enter MSID manually.
Is MSID one of the ten thousand number sequences on the box¿
I think its MAC, MEID etc
Click to expand...
Click to collapse
No.. mac and meid are on there.. msid wouldnt be because its assigned by sprint.. the meid is tied to the device.. msid/min and the telephone number are assigned by sprint.. for example if you change your telephone number your msid is likely to change but in some instances it will remain what it was before.. if people are having issues like he described first thing you would want to check is the programming of the phone.. if the phone was manually programmed (qpst in this case) he could have messed it all up lol.. thats why in the prl threads it says dont do it if your not sure what it is.. qpst has lots of tools in it.. he could have done a number of things wrong if directions werent followed to a T.. either way hope he gets it working right lol
Sent from my SPH-D710 using XDA
You can get your correct msl mdn and msid all from logging into sprint's site and choosing to activate a new device
Sent from my SPH-D710 using XDA
chris41g said:
You can get your correct msl mdn and msid all from logging into sprint's site and choosing to activate a new device
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Good call. I'm just so used to having it all written down that I forget about the right way. Oh, so many networks... neatly written (gf..) it'll come in handy some day... for instance if someone's IP were banned and they wanted access anyway.... or something
Sent from my SPH-D710 using xda premium
deleted
kicker07cvr said:
deleted
Click to expand...
Click to collapse
Could you post your solution in full please for the benefit of others lke myself??? Deleted isnt really much of a solution.
---------- Post added at 07:14 PM ---------- Previous post was at 06:58 PM ----------
chris41g said:
You can get your correct msl mdn and msid all from logging into sprint's site and choosing to activate a new device
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
I have a samsung r720 and have never been on the cricket network before, how else could iget this info. Ive downloaded qpst but it asks for a serial which i dont have. I only have the imei number. I dont use the networks, cant i just make something up.
Cracked screen--Bought replacement--Dies when I swap
I have a black SPH-D710 on Sprint. I cracked the screen, so I bought a white replacement on eBay without the battery or most of the guts.
I took the phone apart and swapped the screens and reconnected the boards and it powers up great... except that I have no service. If I connect back to the cracked screen, it powers up great and I get great service. I was hoping for a quick and dirty swap, but it seems like there must be some code in the screen-side circuit board that is foiling my attempt. I found this video [goo.gl/YNLZE -- xda won't let me post links, yet] where the guy seems to suggest that my problem is the IMEI, but I don't have the first clue about trying to find that in the old part and moving it to the new one, if that's even the problem.
Ideas?
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
ankurcshah said:
I guess i went into ##DATA# and messed something without my knowledge.
Click to expand...
Click to collapse
You "guess" you messed around with something???
Call Sprint
Sent From My Galaxy10. 1 Class Starship...
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Flashing stock ROM wont reset those settings. You will need to reset the activation on a stock ROM. I'm not sure of the code for that but its been in the treads a few times....
Which would be ##786#.....
Still no avail brother!
ankurcshah said:
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Click to expand...
Click to collapse
Is this device compatible with the 3g service your provider uses?
Yes it is. I have been using for quite a some time now.
Having the exact same issue. Not sure what caused it or how to fix it. I too am on stock rom
ankurcshah said:
Yes it is. I have been using for quite a some time now.
Click to expand...
Click to collapse
Have you contacted your cellular provider? If you changed some settings, most likely calling your provider to get the right settings will be your best course of action.
Sent From My Galaxy10. 1 Class Starship...
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Any help?
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
brooksyx said:
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
ankurcshah said:
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Click to expand...
Click to collapse
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
ankurcshah said:
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
Click to expand...
Click to collapse
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Questions:
1. If not how did you get it setup to see their towers???
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
3. If they did, do you still have them and have you tried that???
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
Yes,currently on el29 one click. but stock kernel without cwm
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
Could you link me?
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Nope, I just needed the dump file for the 3g to work, 3g works on my dad's phone and it doesnt on mine. I use the same dump as his. Still? Wierd
Questions:
1. If not how did you get it setup to see their towers???
I just flashed a prl
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
nope, I had set the msl to 000000
3. If they did, do you still have them and have you tried that???
They are not aware of such a thing also.
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
I tired they don't understand "reprovision radios"
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
ankurcshah said:
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
Click to expand...
Click to collapse
The reset I mentioned is a "factory reset" ... But like I already posted... It will only delete all of your user data and reset settings like wifi, email passwords...
It won't reset the radios...
If you had already flashed these files to get your phone working when you got it, Don't you still have them???
Sent From My Galaxy Class Star Fighter...
My 2 cents here, not completely sure but I saw this today.
Know your msl
>go to phone enter ##data#
>Click edit
>Then enter msl
>click other
>go into Korea mode
>click on India mode, press okay.
>reboot
Sent from my SPH-D710 using Tapatalk 2
Tried out! No changes takes place. Gonna take the qcn of a friends write it onto my phone,change imsi,meid,mdn and check.
Sent from my SPH-D710 using Tapatalk 2
Were u mentioning the one click thingys? Yes i have tried out every damn thing now.
Now on ics still no 3G
Sent from my SPH-D710 using Tapatalk 2
The one click restore files are for Sprint phones so I doubt if they would work for you
Hmmm,all right
Sent from my SPH-D710 using Tapatalk 2