[Q] edit epic 4g wimax realm for clear/clearwire? - Epic 4G Q&A, Help & Troubleshooting

i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!

eigerzoom said:
i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
Click to expand...
Click to collapse
What is the benefit of this>?

you can read all about it in the evo 4g forums
however the issue here (or at least for me) is
I can't find where to edit the realm on the epic

its not the data profile username?
[email protected]?
i tried changing that with the [email protected]
i still got the sprint wall
where do i change the realm on the epic...uhg

http://forum.xda-developers.com/showthread.php?t=780742&highlight=cricket

found it...so dumb...
to change wimax realm enter ##data# but hit 'view' (i kept hitting 'edit')
then wimax will be in the list
wimax will then request your msl if pressed
the realm can be found there and edited with a long press
now i'm stuck at the final step
i may be wrong but i believe the wimax should have its own NAI
and that changing the normal data profile NAI to [email protected] doesn't do anything
because i'm still not getting the Clear wall
and of course our phones are enough different from the evo that NAI couldn't just be right there to be easily edited...
maybe i'm wrong...but its still not working for me
wimax debug mode is still showing sprint as my provider...so i'm 98% sure i haven't found the correct NAI to edit
more uhg

I changed my realm and found that I am definitely getting a clearwire IP, and all http traffic gets redirected to clearwire's site. Definitely a good step in the right direction at any rate.

for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding

eigerzoom said:
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
Click to expand...
Click to collapse
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.

redsox19asb said:
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
Click to expand...
Click to collapse
Did you just change Realm and profile? there is a clearwire tower right in front of my neighborhood. I get directed to home.clear.com

Just tested at home... Sprint 4G @ 2.5mbps down vs Clear @ 7.25mbps down. Definitely a difference. I only changed the WIMAX Realm, nothing else. The clear also seems more reliable. On Sprint it will constantly drop and re-search for the 4G connection.
FYI both have uploads that hover around 1.0mbps.
Sent from my SPH-D700 using XDA App

I only seem to be able to get home.clear.com as well...was there anything else besides the realm that you changed?
Sent from my SPH-D700 using XDA App

No dice in changing from sprint to clear realm. Redirect to clear.com page all the time. I changed it back to sprint.

I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk

Awesome thank you! This worked for me! I couldn't get 4g to work at work and now it works on the clear realm, can't wait to test it at home tonight to see if it's better or worse than sprint's realm (or if there is any difference at all).

rangerover_95 said:
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.

JOLTnPEST said:
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
Click to expand...
Click to collapse
I did, just a case of inexperience..... I didn't realize it was so straightforward. I am new to Android, so I'm learning as I go. Hell, at least I didn't start a new thread. Lol. Thanks again, I'm going to try this out
Sent from my SPH-D700 using Tapatalk

Meh, I just tried switching my realm to clearwire-wmx.net with no results, unfortunately. I guess I will just have to wait for better coverage to be available in east portland......
Sent from my SPH-D700 using Tapatalk

Keep getting that clear.com redirect, going back to sprintpcs.com

Can anyone else who changed comment if they are able to browse sites or do you get directed to clear.com?

Related

Is there a way to force roaming?

I'm tired of weak signal areas where I slip in and out of roaming, is there a forced roaming app or some type of hack/mod where I can make my phone roam?
You have two choices:
1) Load a Verizon PRL. This involves a good amount of trickery (I haven't tested it myself) but there's instructions around here. This will get your 3G data as well.
2) Get a ROM such as CyanogenMod which has a forced-roaming option. Open up Settings>Wireless & networks>Mobile networks and in there will be an option to select what group (Home Only, Affiliated Networks, Automatic. Automatic is default) of networks to choose. By selecting Affiliated Networks, that will enable forced-roaming, but will only give you 1X data, not 3G.
For calls, Twitter, and push notifications, the 1X data roaming will suffice, especially if you want to switch back and forth (ie, the bad signal is only at work, but you have good reception everywhere else). Personally, I switch to Affiliated Networks when I'm at work, as getting calls and texts is a lot more important for my job than just being able to download a webpage faster.
Damn so I'd have to switch to a ****ty rom to get the option?
That sucks, I don't know how to change the prl so I'm stuck
Sent from my PC36100 using XDA App
A ****ty ROM? That's kind of harsh dude... i thought that someone had an app that did the same thing as the affiliated network switch in CM6?
the_hustleman said:
Damn so I'd have to switch to a ****ty rom to get the option?
That sucks, I don't know how to change the prl so I'm stuck
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
the_hustleman said:
Damn so I'd have to switch to a ****ty rom to get the option?
Click to expand...
Click to collapse
"****ty ROM"? Have you even tried CM6 Final? Furthermore, go screw yourself with a rusty rake. Nobody's going to help an ungrateful prick.
weehooherod said:
Changing the PRL isn't actually that hard. You download the PRL file and just put it on your memory card. Then you download the application called "MSL Reader" from the market and it will tell you your 6 digit MSL code. Then you go to your phone dialer and type in ##PRL# and it will prompt you to put in your MSL. Then you click on the 00001.prl file (which is the only one there) and then press the menu button and then press commit and you're done.
Here is the original thread I got this from.
http://forum.xda-developers.com/showthread.php?t=696073&highlight=evdo+sprint
If dialing ##PRL# doesn't do anything you need to swap out the EPST.apk file with a EPST.apk file that will support these dialer codes. Here is that thread too.
http://forum.xda-developers.com/showthread.php?t=737594&highlight=dialer+codes
Click to expand...
Click to collapse
That requires that EPST even works for your ROM, and unless you have the ever-so-wonderful battery and CPU hogging Sense UI, it won't.
phobos512 said:
A ****ty ROM? That's kind of harsh dude... i thought that someone had an app that did the same thing as the affiliated network switch in CM6?
I called it ****ty because it doesn't even have sense and I guess I can adjust to not having it, but the 4G doesn't work!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
drmacinyasha said:
"****ty ROM"? Have you even tried CM6 Final? Furthermore, go screw yourself with a rusty rake. Nobody's going to help an ungrateful prick.
.
Click to expand...
Click to collapse
Actually I'm very grateful that you took the time to help, didn't mean to offend, I apologize if you took it that way (now that I re-read my comment, I see why you took it that way) but I was just frustrated because I'm stuck between a rock and a hard place, either go through with a procedure I'm not comfortable with OR flashing a ROM that (and this is the whole reason I called it ****ty) doesn't have sense nor does it even have 4G - one of the MAIN REASONS FOR ME BUYING THE PHONE! Understand my dilemma?
I use 4G regularly, so CM6 is a huge no-no for me.
once again, I apologize if you took offense to my comment.
the_hustleman said:
I'm tired of weak signal areas where I slip in and out of roaming, is there a forced roaming app or some type of hack/mod where I can make my phone roam?
Click to expand...
Click to collapse
Yes If you have root there is now. Roam Control on the market by Mr Greg. 5 bucks think. I rooted my EVO yesterday Stock 2.2. Then I bought roam control. I can verify this works on the stock rom.
baknblack said:
Yes If you have root there is now. Roam Control on the market by Mr Greg. 5 bucks think. I rooted my EVO yesterday Stock 2.2. Then I bought roam control. I can verify this works on the stock rom.
Click to expand...
Click to collapse
Did the same thing few days ago, works great! Few places I go that sprint signal is very low and drains battery, switching to roam on verizon makes the battery last a lot longer.
Sent from my PC36100 using XDA App

[Q] WiMAX/4G MAC Address and Key Mod

Ok. I live in a area where Sprint's 4G isn't present at all. However, a company that provides internet through WiMAX to us people out in BFE, who can't get landline internet, are able to use this. The DL speeds I think, max out for this company at around 3-6Mbps. Instead of using Sprint 3G coverage, which isn't full RevA 3.1Mbps, it's like 1-1.5Mbps.
Long story short, can I/could I modify my 4G/WiMAX MAC Address or something to jump on their towers and fully get my $10/Month worth?
I tried looking for this on my own, but the things that I am finding are if I recently did a OS Update, and my MAC has been mixed up and scrambled, not to fully mod the MAC.
edit: would there be a way, to even know if this would work? as in do they have to know my MAC address to provide me the service? Basically, an approval?
edit: post has been moved.
Wrong forum or not; This is a damn good question...
Sent from my PC36100 using XDA App
rbrainard said:
Wrong forum or not; This is a damn good question...
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
At least I am not the only one who wants to know. Lol.
I could be way off base, but this thread (http://forum.xda-developers.com/showthread.php?t=733773) talks about editing wimax signal settings, maybe exploring in that menu will let you edit other wimax settings to get you what you want. Perhaps somebody with more technical knowledge can confirm/dispell this theory. Hopefully this at least points in the right direction...
jdelforge5684 said:
I could be way off base, but this thread (http://forum.xda-developers.com/showthread.php?t=733773) talks about editing wimax signal settings, maybe exploring in that menu will let you edit other wimax settings to get you what you want. Perhaps somebody with more technical knowledge can confirm/dispell this theory. Hopefully this at least points in the right direction...
Click to expand...
Click to collapse
not really.. however this guide was helpful though. but i am looking for a way to modify my entire WiMAX structure to read off these "foriegn, non-sprint" towers that are data only.
anyone here know how to change 4g mac address?
dominicanodcora said:
anyone here know how to change 4g mac address?
Click to expand...
Click to collapse
Try this thread http://forum.xda-developers.com/showthread.php?t=715525
Sorry to burst your bubble but you have RSA keys on your phone for a reason. to verify you are who you are and to make sure your data doesn't get mixed up and that you can use clear's towers (sprint basically).
The company probably has a way to identify authorized users on its network and who is not authorized to use it.
That is the issue you ill most likely run into when you are trying to connect to their network.
Technically you shouldn't be able to do that but maybe the company doesn't give a damn....Ehh

3g hack ???

So I recently found out about a 3g hack and was wondering if anyone has tried this on their galaxy s3 ???
khrizg35 said:
So I recently found out about a 3g hack and was wondering if anyone has tried this on their galaxy s3 ???
Click to expand...
Click to collapse
1. Wrong section buddy
2. What 3g hack?
Sorry I didn't know where too post it, Google 3g hack android the htc evo supposedly has it I just pm a user that did it on there galaxy
khrizg35 said:
Sorry I didn't know where too post it, Google 3g hack android the htc evo supposedly has it I just pm a user that did it on there galaxy
Click to expand...
Click to collapse
Link?
http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found
khrizg35 said:
http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found
Click to expand...
Click to collapse
all it does is forces your phone to roam of a vzw tower. you will always roam. the dialer code for us is actually ##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893
billard412 said:
##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893
Click to expand...
Click to collapse
Ive tried it before and yes using ##DATA## to write a Roaming PRL (I tried 00001) DOES work and will get you 3G if there is a strong enough Verizon signal.
Thanks for all the info you guys I got the wrong impression when I first read about it
Didn't know where to put it huh?
Well here's a bit of helpful advice, if you put a question mark on your title, your thread needs to be posted in the Q&A. Simple I think!
khrizg35 said:
http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found
Click to expand...
Click to collapse
billard412 said:
all it does is forces your phone to roam of a vzw tower. you will always roam. the dialer code for us is actually ##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893
Click to expand...
Click to collapse
actually they will with Any Cut. But using the 00001 PRL is dumb. Use a Sprint Corporate PRL like 11115, 11117, or 11119. They also allow roaming on 3g and when roam control is working on our phone you'll be able to toggle between Sprint and Verizon.
nicholaaaas said:
actually they will with Any Cut. But using the 00001 PRL is dumb. Use a Sprint Corporate PRL like 11115, 11117, or 11119. They also allow roaming on 3g and when roam control is working on our phone you'll be able to toggle between Sprint and Verizon.
Click to expand...
Click to collapse
Ya any cut is good for it too. Never mess with the prls myself anyway. None give me 3g and even if it did 300 mb ain't **** wen u actually have a usable connection.I'd burn that up super quick. Can't even DL a ROM with it don't see the point
clark44 said:
1. Wrong section buddy
2. What 3g hack?
Click to expand...
Click to collapse
He's talking about where you change your Rtsp proxies and Httppd proxies to 0.0.0.0 and 0
elephant007 said:
Didn't know where to put it huh?
Well here's a bit of helpful advice, if you put a question mark on your title, your thread needs to be posted in the Q&A. Simple I think!
Click to expand...
Click to collapse
See you just asked a question as well. Then looks like your post to him should have been posted in the proper thread as well. (Q&A) Your right pretty simple. No biggie. He made a mistake. I know you never made a mistake.
You know, Im getting sick of people posting **** that they should know doesnt belong in the development thread. @Autorail - read the rules before you post. You cant post in development when you first get an account for a reason. It gives you plenty of time to read the rules. There is a sticky on the first page of development. If you bothered to read it, it says:
Only the following topics are allowed in DEVELOPMENT area:
[DEV] - Development for any special projects or Apps
[ROM] - Custom ROMs
[KERNEL] - Custom Kernels
[MOD] - Hack & Modifications for the phone
[FIX] - Fixes for known issues & bugs
[R&D] - Research & Development for Devs only, when gathering data for a new projects
[HOWTO] / [GUIDE] - How to instructions and Guides
If whatever you are posting doesnt fall into any of those categories, than it goes somewhere else.
I hate seeing this crap on every freaking device. READ, READ, READ, and use the SEARCH BUTTON.
If I would of known people would be getting butt hurt because of a honest mistake I wouldn't of posted in the first place . Hinges mistake so what give me a warning suspend or cancel my account doesn't matter you guys get but hurt to easily haha
Download 00001.prl, put in in the root of internal storage - /sdcard. Rename it to test.prl, disable mobile data, from phone dialer - ##3282#, choose view, choose write prl, choose write prl. After reboot, reenable mobile data and you should be roaming on Verizon, possibly roaming with 3g speeds.
You can confirm this by going to Settings/About/Status, where PRL will be "1".
To reset back to Sprint prl, go to Settings/System Updates, then do Update Profile, then Update PRL.
khrizg35 said:
If I would of known people would be getting butt hurt because of a honest mistake I wouldn't of posted in the first place . Hinges mistake so what give me a warning suspend or cancel my account doesn't matter you guys get but hurt to easily haha
Click to expand...
Click to collapse
Yes, i'm going to be that guy. It's 2012, there's no excuse for not knowing how to differentiate between "have" and "of". A big pet peeve of mine i see a lot on internet forums.
....Deleted message...
Read forum rules and stickies before posting!
Thread moved
FNM
Sent from my SPH-L710 using xda premium
I use ##3282# hack.....go to edit.....enter msl code.....multimedia.....others change ports to 0.0.0.0 and proxies to 0......n back out of it
Sent from my SPH-L710 using xda premium

[Q] Data profile update errors and extreme slow speeds - Help please

When I try to update my data profile (because of VERY slow 3G speeds on my E4GT converted to Boost) I get "The profile update could not be completed. Error: Unknown error". Sometimes, I also get the Error 67, that my Sprint data username and password are incorrect. The E4GT is on a stock GB ROM.
The 3G symbol and arrows take several seconds to appear after I take the phone out of airplane mode, sometimes requiring a restart, and even then, once they appear, they sometimes stay greyed out even though apps are asking for data. When the arrows do go green and orange to indicate active data transfer, it's VERY slow, almost 1x like.
Also, sometimes, far far more often than my Galaxy S1, the signal bars will drop from very good signal (full or almost full) to half or to almost none, then come back up.
'
In testing my 3G connection speed with the Ookla Speedtest.net app right now, my first test got a 962ms ping, a download of 121kbps, and an upload of 152kbps. Two further tests resulted on "network communication issues) with the 3G icon's arrows being greyed out. It was on the Witchita, KS server. I could not get it on the San Francisco server that my Galaxy S1 tested on, as the listbox to choose the server would not scroll to server more than about 1,000 KM away.
For reference, in the same spot, my Sprint/Samsung Galaxy S1 (on Boost, with the same account that's now on the E4GT - Neither is on the network at the same time as the other) scores thus: 126ms ping, a download of 470kbps, and an upload of 797kbps. It was on a local (to me, as in, in my city) server, San Francisco.
Help!
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
MoHoGalore said:
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
Click to expand...
Click to collapse
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
SweetBearCub said:
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
Click to expand...
Click to collapse
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
peryp9 said:
I fixed the problem. Here's what I did, just in case someone else's phone experiences the same symptoms.
-from the dialer, type ##3282# ...
-click EDIT and type your MSL code
-select EVDO from the menu
-I waited about 3 seconds while the signal bars and the 3G icons disappeared ... then I waited another couple of seconds for the icons to re-appear
-then I pressed the back button until I was back in the Home screen
NOTE: I didn't change any settings during this procedure, the 3G restored itself just by entering and exiting this menu
It looks like the radio resets during this procedure and everything restores back to normal. It's interesting that updating the Profile and the PRL did not help, even though the radio resets itself after performing said updates.
Click to expand...
Click to collapse
MoHoGalore said:
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
Click to expand...
Click to collapse
I tried the radio reset procedure you quoted, but it had no effect. Here's a video (4m, 14s) showing me trying the reset procedure and a speed test afterward, as well as my profile update difficulties.
Take a look. My apologies for the focus issues. http://www.youtube.com/watch?v=1MMh4gD7sGA
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
SweetBearCub said:
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
Click to expand...
Click to collapse
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I tried a one click back to EL29 (Gingerbread) last night since I read that I must be on a GB ROM to install CWM and proceed from there. No change in speeds, still have the error 67 registration failure.
Further, I rolled my OG Epic 4G back to stock so that I could get at the dialer codes and get it recognized in QPST, read its settings and saved them to a file, then opened up my E4GT in a window beside it. I then duped all the M.IP and PPP Config settings. I also checked the NAM settings to make sure they agreed.
No luck, I'm still having the same issues, while my OG Epic 4G is not.

Data Profile not updating??

okay i had perfect 3g connection before i had youtube streaming fast and webpages loading really fast. Now my 3g is no bueno i have connection time outs and slow downloads speeds and buffering is all i get when trying to watch youtube over 3g. So what ive done so far
First i went straight back to stock and factory resetted everything on Gingerbread and did my OTA official updates than did update prl and profile in settings status update but my data connection over 3g is still slow so i did the next thing
##72786# SCRN reset
##3282# (checked all my settings) Device ip says 0.0.0.0 dont know if thats right the other info dont know if thats right either only able to VIEW and EDIT seperate fields one at a time
##MSL#(even put in a new MIEID number from sprint)
then onstart up hands free activation is running sucessfully it updates prl and check for firmware.I then open up sprint zone to chck voice and data both are green however there is a message of an very important profile update available please click here to have full coverage of your data so i click it and i get error cant update profile please try again later.So i keep trying and eventually it updates and says settings have been applied updating content. when i reopen the sprint zone voice and data turn green but the darn profile update for full data services is still there. So i power off pull battery and continue getting same results. The data profile isnt sticking even when it says its been updated. My 3g internet is still slow. Ive also done factory resets from the recovery menu.Sprint even re-pushed my connection off on then pulled battery to see if signal issues were an issue.
so then i do ##rtn# but still the same results. I have tried different modems as well to see if that was the case but no cigar.
Im currently on FH13 ICS 4.0.4 Official stock sprint. the sprint tec support suggest me to go into a store for further troubleshooting cause thats all they can do however i think theres more i can do here just need a little help. I know theres a bunch of more menues i can enter the codes are from this website below. I hope someone can help me with specific correct configurations in the data profile section because this phone doesnt give you the option to reset to default in your data menu just edit and view. Thank you in advanced
http://www.cellunlocker.net/blog/2011/07/samsung-galaxy-s2-secret-codes/
Thier wasnt any outage on my network or construction over here either
Don't pay attention to it's a bug in Sprint Zone it always will say there's an update. Update PRL and Profile in Settings and you're good. About speed maybe a network problem in your area it happens to me yesterday PRL Update failing and eventually updated after a few hours also speeds went back I called Sprint and indeed it was a tower problem in my area.
They will tell you there's not outage if no one is reporting. It happens a lot here in PR and when I pass by the tower in Hatillo there are workers on the tower. Lol they know nothing about their own towers.
Sent from my SPH-D710 using Tapatalk 2
k cool
No4g4Me said:
k cool
Click to expand...
Click to collapse
Yeah, what Omar said. Plus Sprint zone is ugly as hell. I can't believe sprint allows such hideous application. Have you seen the boost zone? it's so beautiful.
Lets theme Sprint Zone!!! Lol.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Lets theme Sprint Zone!!! Lol.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Leave it to team themers, ugh I mean team devs, to take care of that...
Being that it's Sprint, more than likely it's just their horrible service. If you call them they will probably just give you an excuse like a tower down or something. I have constant issues with their data speeds and signal and this what they always tell me.. .
Sent from my SPH-D710 using XDA
im using a signal boost app thats from market. https://play.google.com/store/apps/details?id=com.freshnetwork
and its fixed my youtube streaming over 3g don't know why it takes an app to do whatever its doing for a signal im already supposed to have.
Sent from my SPH-D710 using Tapatalk
but what also is funny is that im using a app called landroid which lets you poke around your network and see information by entering your IP so i did and i got this off a ping......
10 packets transmitted, 0 received, +1 errors, 100% packet loss, time 9007ms
this cant be right though because im using 3g right now to write this post shouldn't i be unable to reach through with these results?
i ran a busybox ifconfig and got the results i should have no packets lossed maybe i entered the ip wrong or its one of those loop traces idk it said ip so thats what i used in landroid regardless still got good 3g any tec want to fill the slots for me please thanks.
No4g4Me said:
im using a signal boost app thats from market. https://play.google.com/store/apps/details?id=com.freshnetwork
and its fixed my youtube streaming over 3g don't know why it takes an app to do whatever its doing for a signal im already supposed to have.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I didn't really notice an improvement with this app...
Sent from my SPH-D710 using XDA
it improved for a couple of hours then went back down.
Sent from my SPH-D710 using Tapatalk
im looking into traceroutes and flushing dns thier has to be something slowin it down. Google time
Sent from my SPH-D710 using Tapatalk

Categories

Resources