3g hack ??? - Sprint Samsung Galaxy S III

So I recently found out about a 3g hack and was wondering if anyone has tried this on their galaxy s3 ???

khrizg35 said:
So I recently found out about a 3g hack and was wondering if anyone has tried this on their galaxy s3 ???
Click to expand...
Click to collapse
1. Wrong section buddy
2. What 3g hack?

Sorry I didn't know where too post it, Google 3g hack android the htc evo supposedly has it I just pm a user that did it on there galaxy

khrizg35 said:
Sorry I didn't know where too post it, Google 3g hack android the htc evo supposedly has it I just pm a user that did it on there galaxy
Click to expand...
Click to collapse
Link?

http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found

khrizg35 said:
http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found
Click to expand...
Click to collapse
all it does is forces your phone to roam of a vzw tower. you will always roam. the dialer code for us is actually ##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893

billard412 said:
##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893
Click to expand...
Click to collapse
Ive tried it before and yes using ##DATA## to write a Roaming PRL (I tried 00001) DOES work and will get you 3G if there is a strong enough Verizon signal.

Thanks for all the info you guys I got the wrong impression when I first read about it

Didn't know where to put it huh?
Well here's a bit of helpful advice, if you put a question mark on your title, your thread needs to be posted in the Q&A. Simple I think!

khrizg35 said:
http://forum.xda-developers.com/showthread.php?t=696073 just one recent link I found
Click to expand...
Click to collapse
billard412 said:
all it does is forces your phone to roam of a vzw tower. you will always roam. the dialer code for us is actually ##3282#. and most hacked prl's (00001 00002 01337 etc) will not write using the phone itself you must use something like qpst/cdma workshop to apply. personally i tend to drop to 1x when i use any of those but i dont know if thats just me or not. to apply name the prl your trying to "test.prl" and put on the root of your sd card. hit ##3282# in the dialer and when the menu comes up hit view. at the bottem hit PRL write and then the button that pops up after. It will apply and reboot. Cant hurt nothing but most likely wont work from the phone. results may very. from what i remember only one that worked for me writing from the phone was 01337 however all three didnt get me 3g. good luck
LInks to other prl's in this guide http://forum.xda-developers.com/showthread.php?t=1267893
Click to expand...
Click to collapse
actually they will with Any Cut. But using the 00001 PRL is dumb. Use a Sprint Corporate PRL like 11115, 11117, or 11119. They also allow roaming on 3g and when roam control is working on our phone you'll be able to toggle between Sprint and Verizon.

nicholaaaas said:
actually they will with Any Cut. But using the 00001 PRL is dumb. Use a Sprint Corporate PRL like 11115, 11117, or 11119. They also allow roaming on 3g and when roam control is working on our phone you'll be able to toggle between Sprint and Verizon.
Click to expand...
Click to collapse
Ya any cut is good for it too. Never mess with the prls myself anyway. None give me 3g and even if it did 300 mb ain't **** wen u actually have a usable connection.I'd burn that up super quick. Can't even DL a ROM with it don't see the point

clark44 said:
1. Wrong section buddy
2. What 3g hack?
Click to expand...
Click to collapse
He's talking about where you change your Rtsp proxies and Httppd proxies to 0.0.0.0 and 0

elephant007 said:
Didn't know where to put it huh?
Well here's a bit of helpful advice, if you put a question mark on your title, your thread needs to be posted in the Q&A. Simple I think!
Click to expand...
Click to collapse
See you just asked a question as well. Then looks like your post to him should have been posted in the proper thread as well. (Q&A) Your right pretty simple. No biggie. He made a mistake. I know you never made a mistake.

You know, Im getting sick of people posting **** that they should know doesnt belong in the development thread. @Autorail - read the rules before you post. You cant post in development when you first get an account for a reason. It gives you plenty of time to read the rules. There is a sticky on the first page of development. If you bothered to read it, it says:
Only the following topics are allowed in DEVELOPMENT area:
[DEV] - Development for any special projects or Apps
[ROM] - Custom ROMs
[KERNEL] - Custom Kernels
[MOD] - Hack & Modifications for the phone
[FIX] - Fixes for known issues & bugs
[R&D] - Research & Development for Devs only, when gathering data for a new projects
[HOWTO] / [GUIDE] - How to instructions and Guides
If whatever you are posting doesnt fall into any of those categories, than it goes somewhere else.
I hate seeing this crap on every freaking device. READ, READ, READ, and use the SEARCH BUTTON.

If I would of known people would be getting butt hurt because of a honest mistake I wouldn't of posted in the first place . Hinges mistake so what give me a warning suspend or cancel my account doesn't matter you guys get but hurt to easily haha

Download 00001.prl, put in in the root of internal storage - /sdcard. Rename it to test.prl, disable mobile data, from phone dialer - ##3282#, choose view, choose write prl, choose write prl. After reboot, reenable mobile data and you should be roaming on Verizon, possibly roaming with 3g speeds.
You can confirm this by going to Settings/About/Status, where PRL will be "1".
To reset back to Sprint prl, go to Settings/System Updates, then do Update Profile, then Update PRL.

khrizg35 said:
If I would of known people would be getting butt hurt because of a honest mistake I wouldn't of posted in the first place . Hinges mistake so what give me a warning suspend or cancel my account doesn't matter you guys get but hurt to easily haha
Click to expand...
Click to collapse
Yes, i'm going to be that guy. It's 2012, there's no excuse for not knowing how to differentiate between "have" and "of". A big pet peeve of mine i see a lot on internet forums.

....Deleted message...

Read forum rules and stickies before posting!
Thread moved
FNM
Sent from my SPH-L710 using xda premium

I use ##3282# hack.....go to edit.....enter msl code.....multimedia.....others change ports to 0.0.0.0 and proxies to 0......n back out of it
Sent from my SPH-L710 using xda premium

Related

Is there a way to force roaming?

I'm tired of weak signal areas where I slip in and out of roaming, is there a forced roaming app or some type of hack/mod where I can make my phone roam?
You have two choices:
1) Load a Verizon PRL. This involves a good amount of trickery (I haven't tested it myself) but there's instructions around here. This will get your 3G data as well.
2) Get a ROM such as CyanogenMod which has a forced-roaming option. Open up Settings>Wireless & networks>Mobile networks and in there will be an option to select what group (Home Only, Affiliated Networks, Automatic. Automatic is default) of networks to choose. By selecting Affiliated Networks, that will enable forced-roaming, but will only give you 1X data, not 3G.
For calls, Twitter, and push notifications, the 1X data roaming will suffice, especially if you want to switch back and forth (ie, the bad signal is only at work, but you have good reception everywhere else). Personally, I switch to Affiliated Networks when I'm at work, as getting calls and texts is a lot more important for my job than just being able to download a webpage faster.
Damn so I'd have to switch to a ****ty rom to get the option?
That sucks, I don't know how to change the prl so I'm stuck
Sent from my PC36100 using XDA App
A ****ty ROM? That's kind of harsh dude... i thought that someone had an app that did the same thing as the affiliated network switch in CM6?
the_hustleman said:
Damn so I'd have to switch to a ****ty rom to get the option?
That sucks, I don't know how to change the prl so I'm stuck
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
the_hustleman said:
Damn so I'd have to switch to a ****ty rom to get the option?
Click to expand...
Click to collapse
"****ty ROM"? Have you even tried CM6 Final? Furthermore, go screw yourself with a rusty rake. Nobody's going to help an ungrateful prick.
weehooherod said:
Changing the PRL isn't actually that hard. You download the PRL file and just put it on your memory card. Then you download the application called "MSL Reader" from the market and it will tell you your 6 digit MSL code. Then you go to your phone dialer and type in ##PRL# and it will prompt you to put in your MSL. Then you click on the 00001.prl file (which is the only one there) and then press the menu button and then press commit and you're done.
Here is the original thread I got this from.
http://forum.xda-developers.com/showthread.php?t=696073&highlight=evdo+sprint
If dialing ##PRL# doesn't do anything you need to swap out the EPST.apk file with a EPST.apk file that will support these dialer codes. Here is that thread too.
http://forum.xda-developers.com/showthread.php?t=737594&highlight=dialer+codes
Click to expand...
Click to collapse
That requires that EPST even works for your ROM, and unless you have the ever-so-wonderful battery and CPU hogging Sense UI, it won't.
phobos512 said:
A ****ty ROM? That's kind of harsh dude... i thought that someone had an app that did the same thing as the affiliated network switch in CM6?
I called it ****ty because it doesn't even have sense and I guess I can adjust to not having it, but the 4G doesn't work!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
drmacinyasha said:
"****ty ROM"? Have you even tried CM6 Final? Furthermore, go screw yourself with a rusty rake. Nobody's going to help an ungrateful prick.
.
Click to expand...
Click to collapse
Actually I'm very grateful that you took the time to help, didn't mean to offend, I apologize if you took it that way (now that I re-read my comment, I see why you took it that way) but I was just frustrated because I'm stuck between a rock and a hard place, either go through with a procedure I'm not comfortable with OR flashing a ROM that (and this is the whole reason I called it ****ty) doesn't have sense nor does it even have 4G - one of the MAIN REASONS FOR ME BUYING THE PHONE! Understand my dilemma?
I use 4G regularly, so CM6 is a huge no-no for me.
once again, I apologize if you took offense to my comment.
the_hustleman said:
I'm tired of weak signal areas where I slip in and out of roaming, is there a forced roaming app or some type of hack/mod where I can make my phone roam?
Click to expand...
Click to collapse
Yes If you have root there is now. Roam Control on the market by Mr Greg. 5 bucks think. I rooted my EVO yesterday Stock 2.2. Then I bought roam control. I can verify this works on the stock rom.
baknblack said:
Yes If you have root there is now. Roam Control on the market by Mr Greg. 5 bucks think. I rooted my EVO yesterday Stock 2.2. Then I bought roam control. I can verify this works on the stock rom.
Click to expand...
Click to collapse
Did the same thing few days ago, works great! Few places I go that sprint signal is very low and drains battery, switching to roam on verizon makes the battery last a lot longer.
Sent from my PC36100 using XDA App

[Q] edit epic 4g wimax realm for clear/clearwire?

i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
eigerzoom said:
i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
Click to expand...
Click to collapse
What is the benefit of this>?
you can read all about it in the evo 4g forums
however the issue here (or at least for me) is
I can't find where to edit the realm on the epic
its not the data profile username?
[email protected]?
i tried changing that with the [email protected]
i still got the sprint wall
where do i change the realm on the epic...uhg
http://forum.xda-developers.com/showthread.php?t=780742&highlight=cricket
found it...so dumb...
to change wimax realm enter ##data# but hit 'view' (i kept hitting 'edit')
then wimax will be in the list
wimax will then request your msl if pressed
the realm can be found there and edited with a long press
now i'm stuck at the final step
i may be wrong but i believe the wimax should have its own NAI
and that changing the normal data profile NAI to [email protected] doesn't do anything
because i'm still not getting the Clear wall
and of course our phones are enough different from the evo that NAI couldn't just be right there to be easily edited...
maybe i'm wrong...but its still not working for me
wimax debug mode is still showing sprint as my provider...so i'm 98% sure i haven't found the correct NAI to edit
more uhg
I changed my realm and found that I am definitely getting a clearwire IP, and all http traffic gets redirected to clearwire's site. Definitely a good step in the right direction at any rate.
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
eigerzoom said:
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
Click to expand...
Click to collapse
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
redsox19asb said:
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
Click to expand...
Click to collapse
Did you just change Realm and profile? there is a clearwire tower right in front of my neighborhood. I get directed to home.clear.com
Just tested at home... Sprint 4G @ 2.5mbps down vs Clear @ 7.25mbps down. Definitely a difference. I only changed the WIMAX Realm, nothing else. The clear also seems more reliable. On Sprint it will constantly drop and re-search for the 4G connection.
FYI both have uploads that hover around 1.0mbps.
Sent from my SPH-D700 using XDA App
I only seem to be able to get home.clear.com as well...was there anything else besides the realm that you changed?
Sent from my SPH-D700 using XDA App
No dice in changing from sprint to clear realm. Redirect to clear.com page all the time. I changed it back to sprint.
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Awesome thank you! This worked for me! I couldn't get 4g to work at work and now it works on the clear realm, can't wait to test it at home tonight to see if it's better or worse than sprint's realm (or if there is any difference at all).
rangerover_95 said:
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
JOLTnPEST said:
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
Click to expand...
Click to collapse
I did, just a case of inexperience..... I didn't realize it was so straightforward. I am new to Android, so I'm learning as I go. Hell, at least I didn't start a new thread. Lol. Thanks again, I'm going to try this out
Sent from my SPH-D700 using Tapatalk
Meh, I just tried switching my realm to clearwire-wmx.net with no results, unfortunately. I guess I will just have to wait for better coverage to be available in east portland......
Sent from my SPH-D700 using Tapatalk
Keep getting that clear.com redirect, going back to sprintpcs.com
Can anyone else who changed comment if they are able to browse sites or do you get directed to clear.com?

[Q] Data profile update errors and extreme slow speeds - Help please

When I try to update my data profile (because of VERY slow 3G speeds on my E4GT converted to Boost) I get "The profile update could not be completed. Error: Unknown error". Sometimes, I also get the Error 67, that my Sprint data username and password are incorrect. The E4GT is on a stock GB ROM.
The 3G symbol and arrows take several seconds to appear after I take the phone out of airplane mode, sometimes requiring a restart, and even then, once they appear, they sometimes stay greyed out even though apps are asking for data. When the arrows do go green and orange to indicate active data transfer, it's VERY slow, almost 1x like.
Also, sometimes, far far more often than my Galaxy S1, the signal bars will drop from very good signal (full or almost full) to half or to almost none, then come back up.
'
In testing my 3G connection speed with the Ookla Speedtest.net app right now, my first test got a 962ms ping, a download of 121kbps, and an upload of 152kbps. Two further tests resulted on "network communication issues) with the 3G icon's arrows being greyed out. It was on the Witchita, KS server. I could not get it on the San Francisco server that my Galaxy S1 tested on, as the listbox to choose the server would not scroll to server more than about 1,000 KM away.
For reference, in the same spot, my Sprint/Samsung Galaxy S1 (on Boost, with the same account that's now on the E4GT - Neither is on the network at the same time as the other) scores thus: 126ms ping, a download of 470kbps, and an upload of 797kbps. It was on a local (to me, as in, in my city) server, San Francisco.
Help!
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
MoHoGalore said:
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
Click to expand...
Click to collapse
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
SweetBearCub said:
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
Click to expand...
Click to collapse
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
peryp9 said:
I fixed the problem. Here's what I did, just in case someone else's phone experiences the same symptoms.
-from the dialer, type ##3282# ...
-click EDIT and type your MSL code
-select EVDO from the menu
-I waited about 3 seconds while the signal bars and the 3G icons disappeared ... then I waited another couple of seconds for the icons to re-appear
-then I pressed the back button until I was back in the Home screen
NOTE: I didn't change any settings during this procedure, the 3G restored itself just by entering and exiting this menu
It looks like the radio resets during this procedure and everything restores back to normal. It's interesting that updating the Profile and the PRL did not help, even though the radio resets itself after performing said updates.
Click to expand...
Click to collapse
MoHoGalore said:
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
Click to expand...
Click to collapse
I tried the radio reset procedure you quoted, but it had no effect. Here's a video (4m, 14s) showing me trying the reset procedure and a speed test afterward, as well as my profile update difficulties.
Take a look. My apologies for the focus issues. http://www.youtube.com/watch?v=1MMh4gD7sGA
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
SweetBearCub said:
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
Click to expand...
Click to collapse
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I tried a one click back to EL29 (Gingerbread) last night since I read that I must be on a GB ROM to install CWM and proceed from there. No change in speeds, still have the error 67 registration failure.
Further, I rolled my OG Epic 4G back to stock so that I could get at the dialer codes and get it recognized in QPST, read its settings and saved them to a file, then opened up my E4GT in a window beside it. I then duped all the M.IP and PPP Config settings. I also checked the NAM settings to make sure they agreed.
No luck, I'm still having the same issues, while my OG Epic 4G is not.

PRL 2000 ?

My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
advice
Hey you may want to edit the first pic shows way too much info ......phone number meid etc .....
PRL 2000 is an emergency prl I dont know the specific details but in the sprint prl update thread its been happening to alot of people what you can do is manually update your prl to say 25013/15 or 55015 or something like that or try the modded verizon prls they're doing great for me
chris0160 said:
PRL 2000 is an emergency prl I dont know the specific details but in the sprint prl update thread its been happening to alot of people what you can do is manually update your prl to say 25013/15 or 55015 or something like that or try the modded verizon prls they're doing great for me
Click to expand...
Click to collapse
Where are these prl's at to get? im stuck on 2000 and going in and pressing the update button still just leaves me with 2000.
downsouthballa said:
My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
Click to expand...
Click to collapse
I had the same error even after going back to stock. Sprint rep said that they have no record of that error and didn't know how to handle it. He reset the phone with ## commands (sorry don't remember) then the phone wouldn't activate. Took back to best buy and the Samsung rep flashed something, no help. I have a replacement now. I hope you have better luck.
Sent from my SPH-L900 using Tapatalk 4 Beta
##3282 itll show the data menu click view and there should be a tab for PRL write click it then click prl write again.... 1st did you find the prls? If not google search every sprint prl its xda galaxy s3 thread the first one and download allprl.zip and extract it and choose which prl copy it to the root of your sdcard rename it to test.prl REMEMBER TO TURN OFF DATA it wont work without that I learned that from someone in the sprint prl update thread then do the earlier steps ##3282# etc....
---------- Post added at 09:15 PM ---------- Previous post was at 09:08 PM ----------
Every Sprint Prl
https://www.google.com/url?sa=t&sou...919etGIh-4Jf43qXw&sig2=tO5XUd6jGrmBgdonbvmcwg
Maybe everything you need
chris0160 said:
##3282 itll show the data menu click view and there should be a tab for PRL write click it then click prl write again.... 1st did you find the prls? If not google search every sprint prl its xda galaxy s3 thread the first one and download allprl.zip and extract it and choose which prl copy it to the root of your sdcard rename it to test.prl REMEMBER TO TURN OFF DATA it wont work without that I learned that from someone in the sprint prl update thread then do the earlier steps ##3282# etc....
---------- Post added at 09:15 PM ---------- Previous post was at 09:08 PM ----------
Every Sprint Prl
https://www.google.com/url?sa=t&sou...919etGIh-4Jf43qXw&sig2=tO5XUd6jGrmBgdonbvmcwg
Click to expand...
Click to collapse
I can help you out because I was going through the same problem.
Here's the thread to the list of all PRLs (don't worry about it being in the S3 section, they are the same for the Note II): http://forum.xda-developers.com/showthread.php?t=1880781
Also, if you run accross the issue of not seeing the "PRL write" in the ##DATA# menu, you need to go here: http://forum.xda-developers.com/showthread.php?t=2159054 and flash the MA4 zip. I'm running MC2, and it worked for me. Also, there's some tricks to get the prls to stick when you write them. First, name the PRL "TEST.prl" (all caps). Second, turn your data off before doing the prl write.
This is my first post, so give me a thanks if I did any good
My setup:
Sprint Note II LPH-L900
Rooted stock ROM (MC2)
Kernel: Perseus-alpha36
PRL: 55015 (I'm still looking looking around, though)
My final note: I <3 Xposed Framework
Disclaimer: I don't have a clue what I'm talking about. I can't program or read code. I just look up stuff on Google. If this bricks your phone, don't blame me. Make a backup!
Lol I didn't realize Chris already posted the PRLs thread. I figure why not throw in some screenshots of the dialer steps and menu You should see. I also wanted to show off the theme I came up with.
Sent from my SPH-L900 using xda app-developers app
downsouthballa said:
My prl,,firmware,profile wont update neiher.. It states that the Error code 6204 ..im calling Sprint to see if anything could be done.
Click to expand...
Click to collapse
I get that a lot when they're working on our towers. Only fix is to wait and keep trying. Sometimes it can last a bit but sometimes it can go on for days. A work around I found was to switch from LTE mode to CDMA and let it reprovision on evdo. On evdo the chances of programming are better. It's weird but it works for me most of the time when ehrpd keeps giving me that error. Also I would like to point out that you're roaming and its just a hunch but maybe you can't update while roaming as you're on Verizon's network and not Sprint's which I think is required to pull ur info from.
Sent from my SPH-L900 using xda app-developers app
Its cool you helped more than I did but if thats true about having issues with updating then that happened to me about twice so far meaning about them working on the tower
chris0160 said:
Its cool you helped more than I did but if thats true about having issues with updating then that happened to me about twice so far meaning about them working on the tower
Click to expand...
Click to collapse
Yea I learned that the hard way.. If you get that error while trying to update your profile or prl a handsfree activation is the worst thing you could do. Was stuck with a non working phone with a phone number of 0000003410 or something like that. The reason why I assume it's tower work related is because the problem is on ehrpd only. Once I switch to CDMA mode the process gets completed whether I'm on evdo or 1xrtt. In OP's case though I think it's roaming related.
Sent from my SPH-L900 using xda app-developers app
I had sprint change my username & I had to reset phone by ##72786# once the phone rebooted i let it run the Hands Free Activation and it worked..
I could swear, like others, that I'm having better results with 55015 than 2000. Time will tell still, but previously i was seeing no network connection far too often, signal bars but no 3G or 4G. Have had constant connection so far since switching to 55015 lat night, and i hope it continues, and i hope i dont have any call/text issues due to 800 mhz band or whatever.
Was such a shame to have such a nice phone with such crappy service!

Anyone on PagePlus trying to flash new ROMS

I'm trying to flash newer roms and I can't get data going anyone have any success
Up until a month ago everything was fine but not so anymore
Am I the only pageplus customer on these forums?
Can you update PRL and Profile via Wi-Fi? Report back your results
I did not try to update the prl when I tried these roms but I will
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
I updated the prl but I'm afraid I don't know what it means to update profile
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
the results of updating the prl were promising... I'm just downloading speedtest to see if I'm getting the speed I should
erickr13 said:
Can you update PRL and Profile via Wi-Fi? Report back your results
Click to expand...
Click to collapse
You are the man!!! I still don't know what profile is about but my speeds are what they should be thanks
Sorry that was a false alarm I accidentally flashed an old rom
Im glad it worked for you! I am not sure what updating PRL and Profile does but it works for data issues
Can you post your speeds that you mentioned you were measuring?
erickr13 said:
Im glad it worked for you! I am not sure what updating PRL and Profile does but it works for data issues
Can you post your speeds that you mentioned you were measuring?
Click to expand...
Click to collapse
actually it didn't work for me
Data is really weird for me right now... (a month ago it was fine) I'm constantly flashing new roms
I go between the pacman, liquidsmooth and cm remix
I actually thought it was a radio/prl/ programming issue but now think that it is a rom issue
My house gets horrible data about .4 megs (enough for streaming spotify)
My work gets awesome data about 2.2 megs
I'm about to flash the newest cm remix (because cm remix has been the most reliable when it comes to data
It is hard to believe that there are only two pp customers on this board
Actually I am on RingPlus so I guess that the stuff I do to fix my data issues after flashing a ROM will work on any Sprint network- based company.
Can you try flashing the latest Sprint radios? This link contains all the radios: http://forum.xda-developers.com/galaxy-nexus/sprint-develop/sprint-radio-collection-t2195481
I recommend flashing the radio GA02, report back with results please.
erickr13 said:
I am not sure what updating PRL and Profile does but it works for data issues
Click to expand...
Click to collapse
I've got a toroplus on Page Plus, and unfortunately the 'Update PRL and Profile' trick is no good for us. Page Plus uses Verizon's network, not Sprint's, so our phones have to be manually flashed using ETS and PRLs can be updated using a neat little app called CDMATools. (It's on the forum here somewhere, needs to be a system app) I'm thinking that 'Update Profile' is similar to *228 OTA programming on Verizon's network. That of course doesn't work either for us. The nearest equivalent involves setting up a donor phone, running *228 on that, then pulling the authentication keys from that and writing them to the Toroplus - not exactly something you want to do every day or two to get data working again. .
Do you have your 'preferred network type' set to 3G? May not help, but it's a thought. There are also some more involved network mode settings exposed in the CDMATools app., may be worth poking around in there. It sounds like you're getting good 3G speeds at work, not sure why it would be so slow at home.
Oh I see, I thought PP runs on Sprint network.
Also you mentioned that he need "CDMATools" right? Well installing VanirAOSP (A KK 4.4.2 ROM) will give you CDMATools as a system app if you cant manage to get the app by itself.
musical_chairs said:
I've got a toroplus on Page Plus, and unfortunately the 'Update PRL and Profile' trick is no good for us. Page Plus uses Verizon's network, not Sprint's, so our phones have to be manually flashed using ETS and PRLs can be updated using a neat little app called CDMATools. (It's on the forum here somewhere, needs to be a system app) I'm thinking that 'Update Profile' is similar to *228 OTA programming on Verizon's network. That of course doesn't work either for us. The nearest equivalent involves setting up a donor phone, running *228 on that, then pulling the authentication keys from that and writing them to the Toroplus - not exactly something you want to do every day or two to get data working again. .
Do you have your 'preferred network type' set to 3G? May not help, but it's a thought. There are also some more involved network mode settings exposed in the CDMATools app., may be worth poking around in there. It sounds like you're getting good 3G speeds at work, not sure why it would be so slow at home.
Click to expand...
Click to collapse
**EDIT** To start, I'd like to say that once you've configured your phone properly you can flash whichever ROM you'd like with no problem. I flash mine all of the time, it's great.
PRL stands for Preferred Roaming List. It's a bit of firmware(?) used to program the phone and tell it which cell towers to use. So far as I know, the newer the better.
The profile is the data profile. When you update this, it fine tunes the data settings and includes the information your phone needs to communicate with the network to negotiate your Internet/MMS access.
If you're on a Sprint-based provider, you'd normally be able to provide the information to the best of your ability (following a trustworthy guide) and then connect to wi-fi to have the final configuration updated. This is what I did, I had no data access until I did this part.
But... since you're on PagePlus(which is Verizon-based) I don't know how simple or difficult this is. It may be as simple as flashing a PagePlus PRL and a Verizon radio. It may be more complicated. There are guides like this one available that should be of some help. Just remember to follow the direction to the letter, a single screw up can result in you not having data or cell service, and even worse you may end up on the phone having to lie to PagePlus.
thanks so much for all of your responses
to be clear, Profiles are not for verizon based /PP users, correct????
Yeah I kind of figured out that Data was independent of rom after about a 2 day freak out session. I have activated data and mms through the long process which involved a donor phone etc.. hence the freak out session (about the thought of doing all over again)
That being said I think some of the newer roms are messing with the data somehow... maybe its the switching between wifi and data... I don't know but I'm on the newest cm remix which I like for a lot of reasons and get data
btw I have it set up on my phone (to save battery) that when my wifi is on my data is off and vice versa does anyone think that the constant switchin on and off is causing problems???
erickr13 said:
Also you mentioned that he need "CDMATools" right? Well installing VanirAOSP (A KK 4.4.2 ROM) will give you CDMATools as a system app if you cant manage to get the app by itself.
Click to expand...
Click to collapse
You can grab the .apk from a ROM like Vanir and push it to /system/app/, or use a flashable .zip like this one here:
http://forum.xda-developers.com/showpost.php?p=48083686&postcount=150
For bonus points, add CDMATools.apk to the list in /system/addon.d/70-gapps.sh and it will stay through flashing ROM upgrades, just like your gapps.
MoseIlla said:
PRL stands for Preferred Roaming List. It's a bit of firmware(?) used to program the phone and tell it which cell towers to use. So far as I know, the newer the better.
Click to expand...
Click to collapse
Not firmware, just a list of towers and networks - but you've got the idea. Here's a fairly recent PRL modified for a Sprint phone on PP, works well for me:
http://www.howardforums.com/showthr...ing-problem-Ver-53078?p=15256795#post15256795
But... since you're on PagePlus(which is Verizon-based) I don't know how simple or difficult this is. It may be as simple as flashing a PagePlus PRL and a Verizon radio.
Click to expand...
Click to collapse
Not Verizon radios, you need the Sprint one. Much more programmable. In fact, the only way to reprovision a Verizon GNex is to flash a modified Sprint CDMA radio. A Page Plus / Verizon prepaid PRL is needed though - that and the authentication keys which must be pulled from a donor phone.
uconnpat said:
thanks so much for all of your responses
to be clear, Profiles are not for verizon based /PP users, correct????
Click to expand...
Click to collapse
Correct. Mine tries to update its profile every time I reboot, maybe because I don't have the shared secrets for 3g data? The profile update always fails, says "can't connect to server." I say "OK" and move on. My 1x data works fine (if you're familiar with PP plans, I'm on the 12, so 3g would just let me chew through my 10Mb/mo. data a bit faster.)
musical_chairs said:
You can grab the .apk from a ROM like Vanir and push it to /system/app/, or use a flashable .zip like this one here:
http://forum.xda-developers.com/showpost.php?p=48083686&postcount=150
For bonus points, add CDMATools.apk to the list in /system/addon.d/70-gapps.sh and it will stay through flashing ROM upgrades, just like your gapps.
Not firmware, just a list of towers and networks - but you've got the idea. Here's a fairly recent PRL modified for a Sprint phone on PP, works well for me:
http://www.howardforums.com/showthr...ing-problem-Ver-53078?p=15256795#post15256795
Not Verizon radios, you need the Sprint one. Much more programmable. In fact, the only way to reprovision a Verizon GNex is to flash a modified Sprint CDMA radio. A Page Plus / Verizon prepaid PRL is needed though - that and the authentication keys which must be pulled from a donor phone.
Correct. Mine tries to update its profile every time I reboot, maybe because I don't have the shared secrets for 3g data? The profile update always fails, says "can't connect to server." I say "OK" and move on. My 1x data works fine (if you're familiar with PP plans, I'm on the 12, so 3g would just let me chew through my 10Mb/mo. data a bit faster.)
Click to expand...
Click to collapse
Thanks so much for this... right now I can get data but it takes a little longer to get working than I'm used to. sometimes I cant get data and about a few weeks back (at about the time my data problems began I did do #228 sel2 which I think updated my prl to 53401 (I didn't check it before hand. I'm flashing the prl you posted I'll report back soon
oh and I'm noticing horrible battery life on my cmremix but that would make sense because it is searching extra hard for towers ... right???
Thank you so much for this!!!!!!!!!!!!!!!
I downloaded vanir, changed the prl, backed up cdmatools so I could use it with any rom if need be and am flashing preferred rom now
will report back soon
says I'm on sprint... cool
the 3g icon works quickly and consistently
but there are two problems
one is that it is showing a '?' with a small version of the four bars
asking me to sign into the network
and speedtest is showing me network communication issues
I think its a 4g thing
I really think that is it... It is trying to get 4g and for the life of me I can't figure out how to tell it to stay away from 4g and just stick to 3g
uconnpat said:
I really think that is it... It is trying to get 4g and for the life of me I can't figure out how to tell it to stay away from 4g and just stick to 3g
Click to expand...
Click to collapse
Settings/Mobile Network Settings/Preferred Network Type/3G. At least that's where it's at in CM. Or, in CDMATools, Data Menu/Advanced/LTE off.
---------- Post added at 09:38 PM ---------- Previous post was at 09:30 PM ----------
uconnpat said:
Thanks so much for this... right now I can get data but it takes a little longer to get working than I'm used to. sometimes I cant get data and about a few weeks back (at about the time my data problems began I did do #228 sel2 which I think updated my prl to 53401 (I didn't check it before hand. I'm flashing the prl you posted I'll report back soon
oh and I'm noticing horrible battery life on my cmremix but that would make sense because it is searching extra hard for towers ... right???
Thank you so much for this!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Wait...*228 worked for you? I thought that was a no-go for us? But if it updated your PRL it must have at least sort of worked. I always thought I was never supposed to do a *228 as that would mess things up.
musical_chairs said:
Settings/Mobile Network Settings/Preferred Network Type/3G. At least that's where it's at in CM. Or, in CDMATools, Data Menu/Advanced/LTE off.
---------- Post added at 09:38 PM ---------- Previous post was at 09:30 PM ----------
Wait...*228 worked for you? I thought that was a no-go for us? But if it updated your PRL it must have at least sort of worked. I always thought I was never supposed to do a *228 as that would mess things up.
Click to expand...
Click to collapse
Yeah it worked and screwed things up!!! I think that is where I went wrong I did the *228 and got a new prl that didn't work well
But thanks to this thread I think I'm good again... I think I'm on the newest Pacman and so far so good but when I reboot it takes a while to normalize

Categories

Resources