When I try to update my data profile (because of VERY slow 3G speeds on my E4GT converted to Boost) I get "The profile update could not be completed. Error: Unknown error". Sometimes, I also get the Error 67, that my Sprint data username and password are incorrect. The E4GT is on a stock GB ROM.
The 3G symbol and arrows take several seconds to appear after I take the phone out of airplane mode, sometimes requiring a restart, and even then, once they appear, they sometimes stay greyed out even though apps are asking for data. When the arrows do go green and orange to indicate active data transfer, it's VERY slow, almost 1x like.
Also, sometimes, far far more often than my Galaxy S1, the signal bars will drop from very good signal (full or almost full) to half or to almost none, then come back up.
'
In testing my 3G connection speed with the Ookla Speedtest.net app right now, my first test got a 962ms ping, a download of 121kbps, and an upload of 152kbps. Two further tests resulted on "network communication issues) with the 3G icon's arrows being greyed out. It was on the Witchita, KS server. I could not get it on the San Francisco server that my Galaxy S1 tested on, as the listbox to choose the server would not scroll to server more than about 1,000 KM away.
For reference, in the same spot, my Sprint/Samsung Galaxy S1 (on Boost, with the same account that's now on the E4GT - Neither is on the network at the same time as the other) scores thus: 126ms ping, a download of 470kbps, and an upload of 797kbps. It was on a local (to me, as in, in my city) server, San Francisco.
Help!
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
MoHoGalore said:
Not saying I know anything about being on Boost but found a couple of XDA threads that talk about Profile/Prl updating on Boost and tweaks for speeds on 3g/4g and wifi.
I'm sure there's a better/quicker answer from the Boost folks here but this might help get you started if you haven't seen them.
Also, saw some outside threads on the same issue you had via Google.
If you've seen these, sorry, just was looking into it.
This post talks about 3g stops working but the method, the poster believes, reset the radio: http://forum.xda-developers.com/showpost.php?p=30389012&postcount=3
Tweaks, general. May help? http://forum.xda-developers.com/showthread.php?t=1506199
Click to expand...
Click to collapse
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
SweetBearCub said:
Thanks. I saw the first thread you linked (In fact, that's how I got my OG Epic onto Boost) and did use it (and others) to get my S2 onto Boost. But where in there do you see talk of resetting the radio?
As far as the second thread, I haven't done those tweaks on my OG S1, and it gets MUCH faster data than this S2, so it must be something else.
Click to expand...
Click to collapse
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
peryp9 said:
I fixed the problem. Here's what I did, just in case someone else's phone experiences the same symptoms.
-from the dialer, type ##3282# ...
-click EDIT and type your MSL code
-select EVDO from the menu
-I waited about 3 seconds while the signal bars and the 3G icons disappeared ... then I waited another couple of seconds for the icons to re-appear
-then I pressed the back button until I was back in the Home screen
NOTE: I didn't change any settings during this procedure, the 3G restored itself just by entering and exiting this menu
It looks like the radio resets during this procedure and everything restores back to normal. It's interesting that updating the Profile and the PRL did not help, even though the radio resets itself after performing said updates.
Click to expand...
Click to collapse
MoHoGalore said:
Sorry, check the link again. I had posted the wrong link originally. Hang on, I'll copy it over to here in case I linked it wrong.
:edit: Here's the post. Sorry about that. And this was taken from a Boost user post on 3g stops functioning.
Click to expand...
Click to collapse
I tried the radio reset procedure you quoted, but it had no effect. Here's a video (4m, 14s) showing me trying the reset procedure and a speed test afterward, as well as my profile update difficulties.
Take a look. My apologies for the focus issues. http://www.youtube.com/watch?v=1MMh4gD7sGA
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Have you manually set prl or tweaked anything on any settings?
And is this new or always after you changed it to boost?
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
SweetBearCub said:
I have not set a PRL. The only thing I tweaked was to remove the Sprint proxy in ##3282, though this did not help my speeds. When I bought the phone it had a bad ESN, so I never activated it on Sprint, only on Boost.
Click to expand...
Click to collapse
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
MoHoGalore said:
Only thing i would think to try is flashing a one click, since I've seen others on boost that says it doesn't change keys etc, and seeing of that helps.
Wish i had more experience with boost to be of any help.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
I tried a one click back to EL29 (Gingerbread) last night since I read that I must be on a GB ROM to install CWM and proceed from there. No change in speeds, still have the error 67 registration failure.
Further, I rolled my OG Epic 4G back to stock so that I could get at the dialer codes and get it recognized in QPST, read its settings and saved them to a file, then opened up my E4GT in a window beside it. I then duped all the M.IP and PPP Config settings. I also checked the NAM settings to make sure they agreed.
No luck, I'm still having the same issues, while my OG Epic 4G is not.
Related
i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
eigerzoom said:
i've looked in ##data# and i dont see it in the epic
need to change sprintpcs.com to clearwire-wmx.net
anyone know where this can be edited
thanks
i've also tried many of the available wimax selections after using *#147852#
nothing found
i'm sure it must be somewhere!
Click to expand...
Click to collapse
What is the benefit of this>?
you can read all about it in the evo 4g forums
however the issue here (or at least for me) is
I can't find where to edit the realm on the epic
its not the data profile username?
[email protected]?
i tried changing that with the [email protected]
i still got the sprint wall
where do i change the realm on the epic...uhg
http://forum.xda-developers.com/showthread.php?t=780742&highlight=cricket
found it...so dumb...
to change wimax realm enter ##data# but hit 'view' (i kept hitting 'edit')
then wimax will be in the list
wimax will then request your msl if pressed
the realm can be found there and edited with a long press
now i'm stuck at the final step
i may be wrong but i believe the wimax should have its own NAI
and that changing the normal data profile NAI to [email protected] doesn't do anything
because i'm still not getting the Clear wall
and of course our phones are enough different from the evo that NAI couldn't just be right there to be easily edited...
maybe i'm wrong...but its still not working for me
wimax debug mode is still showing sprint as my provider...so i'm 98% sure i haven't found the correct NAI to edit
more uhg
I changed my realm and found that I am definitely getting a clearwire IP, and all http traffic gets redirected to clearwire's site. Definitely a good step in the right direction at any rate.
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
eigerzoom said:
for me all web pages fail and do not redirect
but i can navigate to clear.home.com and it loads
where oh where could the wimax nai be hiding
Click to expand...
Click to collapse
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
redsox19asb said:
Just changed mine and definitely goes to the Clear servers. Tested my 4G speeds at work and it is slightly faster on the Clear realm. However, the real test will be when I get home where I get excellent Clear coverage, but horrible Sprint 4G coverage. Will post an update later on tonight.
As for the NAI, don't think it is necessary as I am definitely getting the Clear towers when I switch the realm. But I don't know for sure.
Click to expand...
Click to collapse
Did you just change Realm and profile? there is a clearwire tower right in front of my neighborhood. I get directed to home.clear.com
Just tested at home... Sprint 4G @ 2.5mbps down vs Clear @ 7.25mbps down. Definitely a difference. I only changed the WIMAX Realm, nothing else. The clear also seems more reliable. On Sprint it will constantly drop and re-search for the 4G connection.
FYI both have uploads that hover around 1.0mbps.
Sent from my SPH-D700 using XDA App
I only seem to be able to get home.clear.com as well...was there anything else besides the realm that you changed?
Sent from my SPH-D700 using XDA App
No dice in changing from sprint to clear realm. Redirect to clear.com page all the time. I changed it back to sprint.
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Awesome thank you! This worked for me! I couldn't get 4g to work at work and now it works on the clear realm, can't wait to test it at home tonight to see if it's better or worse than sprint's realm (or if there is any difference at all).
rangerover_95 said:
I would really appreciate a little "how to" on switching your realm to Clear. I am relatively new to this, and have tried searching with google and in the forum search tool, and havent really uncovered anything.... According to Sprint, I should have 4g at my apartment here in east Portland, but my signal disconnects about a mile away. I have a friend who sells Clear, and he said he has sold clear service up and down my area. I know that the area has Clear, I just want to access it..... Thanks in advance....
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
JOLTnPEST said:
Did you not read the thread at all?
Get your MSL write it down.
##data#, View, winmax, enter msl, realm. It says it on the first page.
Click to expand...
Click to collapse
I did, just a case of inexperience..... I didn't realize it was so straightforward. I am new to Android, so I'm learning as I go. Hell, at least I didn't start a new thread. Lol. Thanks again, I'm going to try this out
Sent from my SPH-D700 using Tapatalk
Meh, I just tried switching my realm to clearwire-wmx.net with no results, unfortunately. I guess I will just have to wait for better coverage to be available in east portland......
Sent from my SPH-D700 using Tapatalk
Keep getting that clear.com redirect, going back to sprintpcs.com
Can anyone else who changed comment if they are able to browse sites or do you get directed to clear.com?
Ever since eclair, I've been using the Roam Control app alot on my Epic. There are certain areas that I am in daily that just get spotty/no signal at all. I flash ROMs quite often, and one of the ROMs I flashed in the past killed the Roam Control app. I'm not sure if flashing Froyo was the reason, but I do know that it worked perfectly in the past with this phone.
When I press roam only, it doesn't do anything. It asks for SU permission but the signal bars stay the same. I don't lose signal all together or roam-- this app has no effect on me anymore.
What is the problem here? I am using the latest version of the app (1.5.4) and if it means anything, I'm on ACS' wonderful ROM- 1.1.1.
Does this happen to anyone else, and is there any way to fix it or any other way to force roam?
Thanks!
I had mine break before as it kept telling me to purchase it even though I had already. After numerous attempts of clicking roam, switching devices in settings and trying to connect, uninstalling and reinstalling, and reboots it randomly started working again. Sorry that's not much help but maybe one of those techniques will work for you I wish I knew what exactly fixed but I was doing everything that I don't remember what it finally was, sorry.
I now just use a verizon prl instead so I can get 3g and not just the 1x roam control only allows. Good luck. If I think of anything about exactly what I did I'll let u know.
Sent from my SPH-D700 using XDA Premium App
I checked the auto reboot and when it eventually rebooted, it actually messed up my phone and I got a bunch of FC's
How do you use the Verizon PRL?
Roam control actually works much better for me now the I'm on the ee03 modem
Hmm...theres something wrong on my end then? I tried installing the Roam Control before anything else and it still doesn't work.
Are there any other apps that force roam?
i intsalled roam control and it did nothing. i set everything up and when i manually set it to roam it does nothing. i set it to auto and move to an area i know i get terrible signal and nothing. odd seeing as it has worked for so many.
In my house I get 1 bar on sprint towers, and when I turn on roam control I get 5 on verizons, Ive been using it since February and I believe twice it would kinda wig out and say no signal for about 10 mins or so no matter what I did, I believe it was some kind of auto update or perhaps just resetting itself? Anyways it always came back, the first time was like 10 mins the second was about 5 mins. I know that doesnt explain anything but Its what I have experianced using it. All in all a great app that I use all the time.
I am on the SFR 1.1.1 with EE03 modem and use Roam Control while at work all the time with no problems. I have had the license issue before, but a phone reboot and data connection fixed that.
I would recheck Superuser to see if Roam Control still had permission, also check mobile network settings set to Automatic, and then maybe fix permissions with CWM.
Disclaimer: I am not very developer savvy, so I do not know if these are a waster of time or not.
notmyepic said:
I am on the SFR 1.1.1 with EE03 modem and use Roam Control while at work all the time with no problems. I have had the license issue before, but a phone reboot and data connection fixed that.
I would recheck Superuser to see if Roam Control still had permission, also check mobile network settings set to Automatic, and then maybe fix permissions with CWM.
Disclaimer: I am not very developer savvy, so I do not know if these are a waster of time or not.
Click to expand...
Click to collapse
I wiped all my data and started from fresh, installing Roam Control, making sure that it had SU permission, and made sure that roaming was allowed in the mobile network settings. I went into CWM and fixed my permissions, but it's still the same
Edit: I also updated my PRL but no dough.
brianhuangbh said:
I wiped all my data and started from fresh, installing Roam Control, making sure that it had SU permission, and made sure that roaming was allowed in the mobile network settings. I went into CWM and fixed my permissions, but it's still the same
Click to expand...
Click to collapse
I am on my own version of SRF 1.1.0 called RandomRom linked in my signature. I baked in a lot of the mods that are now added into SRF 1.1.0. It uses Genocide to avoid freezing issues, and comes pre-journaled.
Using my Rom and EC05, roam control works great for me every day in my house. I know for a fact that RC can be a fickle app, so maybe give it a try?
brianhuangbh said:
I checked the auto reboot and when it eventually rebooted, it actually messed up my phone and I got a bunch of FC's
How do you use the Verizon PRL?
Click to expand...
Click to collapse
In the development section they'd a section on how to manually update your prl. Its pretty good instructions. Just find the prl u want to use. I'm u do ng a 0001. I can't remember where I found it if its not in that thread. I'll look later.
Every few weeks I get rolled back to sprint prl but I just take the 2 to change back. If u need any thing else let me know.
Sent from my SPH-D700 using XDA Premium App
stormglove said:
In the development section they'd a section on how to manually update your prl. Its pretty good instructions. Just find the prl u want to use. I'm u do ng a 0001. I can't remember where I found it if its not in that thread. I'll look later.
Every few weeks I get rolled back to sprint prl but I just take the 2 to change back. If u need any thing else let me know.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Just be warned, 3G roaming on Verizon may venture into excessive roaming of your Sprint contract and get your account cancelled. No one has a completely clear answer on what excessive is.
RandomKing said:
Just be warned, 3G roaming on Verizon may venture into excessive roaming of your Sprint contract and get your account cancelled. No one has a completely clear answer on what excessive is.
Click to expand...
Click to collapse
I used roam control pretty much non stop for a couple months and have been on this prl for about another two months and no warnings or anything here. I'm in ms and we don't even have 3g where I'm at. The 0001 prl claims to trick your phone into showing sprint also . So that could be why.
Sent from my SPH-D700 using XDA Premium App
If you are using a backup version of Roam Control then it will not work for some reason.. everytime I change to a diffrent ROM and try reinstalling my apps that I backed up.. Roam Control does the samething.. it wont change your signal.. it just does nothing..
this happens no matter how I restore it.. using Titanium Backup, APP Monster or MyBackup Pro.
Roam Control is the only app I have to reinstall from the Market for it to work properly.
Hope this helped!!
Just to be sure, everyone having problems with Roam Control is going into settings and choosing Samsung as their phone model...yeah?
I've had a few problems with roaming on the GB leak, but it's mostly just more of the same weirdness where I randomly have to reset the modem to get a data connection, and Android refuses to 'Never Ask Again', no matter what settings I check.
Otherwise, I've been roaming with Roam Control daily at work. Mind you, I'm not on any custom kernels.
/sometimes if I start Roam Control when I have absolutely no signal, it'll try to confirm my license, fail, and then get really really pissy until I close out of it, get data back, and run it again, at which point it behaves like I just installed it
//Roam Control is fantastic for when Gingerbread's data breaks, even when on Sprint, since you can just go in, tap Automatic, and it'll reset the modem for you without requiring a reboot
stormglove said:
In the development section they'd a section on how to manually update your prl. Its pretty good instructions. Just find the prl u want to use. I'm u do ng a 0001. I can't remember where I found it if its not in that thread. I'll look later.
Every few weeks I get rolled back to sprint prl but I just take the 2 to change back. If u need any thing else let me know.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Hey, thanks for that. What do I lose using a Verizon PRL? Do I still get my WiMAX 4g access if I use verizon PRL?
i use RC1.4 on EE03, works great for calls...data is 1xrtt as u might already know
Sent from my SPH-D700
I'm using rc1.5.4 and I don't think it works either. I installed it after a day at work which was a bad spot for sprint service but watched my battery drain from 50% in 3 hours with a couple phone calls, emails and texts. Then my battery died. I was not happy that it drained sooo fast. Do any of the earlier versions work? Before 1.4?
jbadboy2007 said:
I'm using rc1.5.4 and I don't think it works either. I installed it after a day at work which was a bad spot for sprint service but watched my battery drain from 50% in 3 hours with a couple phone calls, emails and texts. Then my battery died. I was not happy that it drained sooo fast. Do any of the earlier versions work? Before 1.4?
Click to expand...
Click to collapse
Hmm. Whenever I used to use Roam Control in the past, it gave me much much more battery life. (almost double actually)
But now it doesn't work at all.
The developer of Roam Control is here on XDA, shoot him a PM. He's a really helpful kind of guy.
Sent from Bonsai 7.1.1.1
Hello, As the titlle says.. I'm flashed onto Boost Mobile with everything functional.. (Except GPS, but that's a whole 'nother concern)..
After reading around and searching to no avail, if I need to update my Profile, I get an error.. Something along the lines of ""Error: Cannot Update! Client Authentication Error".
Does anyone know if it's my Boost Mobile affecting this.. Also, anyway to fix it?
Is there a way to manually flash a profile on there?
Leejin said:
Hello, As the titlle says.. I'm flashed onto Boost Mobile with everything functional.. (Except GPS, but that's a whole 'nother concern)..
After reading around and searching to no avail, if I need to update my Profile, I get an error.. Something along the lines of ""Error: Cannot Update! Client Authentication Error".
Does anyone know if it's my Boost Mobile affecting this.. Also, anyway to fix it?
Is there a way to manually flash a profile on there?
Click to expand...
Click to collapse
Your Profile is looking for Sprints server so of course it wont work. If I am not mistaken its a Sprint profile you are updating so if you are on Boost why would you want to do that?
your on boost thats why its giving you that issue... look on the development page for "how to manually update your PRL".. don't remember the name of the op for it on epic touch but i remember it was created by Leviusque on the epic 4g. follow the steps on there and you will be able to update your prl.
edit: found the link
http://forum.xda-developers.com/showthread.php?t=1267893
May i ask how flash your device to boost mobile? a friend was asking me for my epic and how to flash it to metro
youngace look in the development page as well theres a thread call "flash epic touch 4g to boost mobile step by step"
edit:
heres the link
http://forum.xda-developers.com/showthread.php?t=1419488
OTA update and 3g speeds
playya said:
Your Profile is looking for Sprints server so of course it wont work. If I am not mistaken its a Sprint profile you are updating so if you are on Boost why would you want to do that?
Click to expand...
Click to collapse
I am having the same Error: Cannot Update! Client Authentication Error problem on my e4gt as the original poster. I know it is possible to have a sprint phone on boost and be able to use the update profile. I original put a sprint mogul on boost and could update profile, then I switched over to a Samsung sph I-350 simply by calling boost. They had no problem activating it, Update profile, prl worked fine. Then I went to a evo 4g, real pain in the ass phone to get on boost. I had to find the esn in multiple places then zero and change. That phone can update profile, prl too. I used the sph-I350 as the donor. Now I have a Epic 4g touch on boost. Piece of cake to switch over and get everything working, prob the easiest esn change then the rest is simply nv items and copying stuff from qpst and qxdm.
BUT I am still having a problem with updating profile and prl... I updated the prl manually with qpst to make it work on boost right but I want to have the ability to update the profile and prl OTA.
Also I have the weirdest thing happening with 3g speeds when I am home I get great speeds on evdo.A anywhere from 1-2mb down and 300-500kbps up. But when ever I go anywhere else in houston, the speeds take a dramatic change for the worse. I hit around 30-150kbps down and 10-60kbps up. Its really wierd. I have tried every 3g speed fix possible. From zeroing servers, to evdo mode only and loosing the ability to send texts, everything. I think that fixing my ability to update ota will fix this issue.
FYI My evo 4g gets super fast 3g speeds all over houston and it has the ability to update ota.
Where as my e4gt cant ota and only gets good speeds in one location.
Does anyone of the senior devs have any clue on how to fix the ota issue, or 3g issue?
it depends a lot on the rom, Ive always been on boost, and on GB i could update profile and prl but on ICS i cannot..
chris41g said:
it depends a lot on the rom, Ive always been on boost, and on GB i could update profile and prl but on ICS i cannot..
Click to expand...
Click to collapse
Im on the stock sprint GB rom with el29. But unable to update it just makes no sense. Last night I tried to put the donor NV items back on the e4gt and it took, But still same problem no ota update ability.... Something weird about the e4gt I can write the nv 1192 and nv 466 but I cant read them from the e4gt its says access denied.
If i root will It unlock the nv items 1192 and 466? I want to read them to makes sure it took the info from the donor phone.
Google my blog for how to do it properly
Sent from my SPH-D710 using XDA
i found this web site
chris41g.devphone.org/index.php?dir=EpicTouch%2F
is it the right one? If so where are instructions i just see alot of files mainly for roms to flash... I was trying to avoid that and stay stock but what ever works will be great
---------- Post added at 12:39 AM ---------- Previous post was at 12:28 AM ----------
chris nvm my last post i found it. I have a question??
If i go into qpst and delete my profile 1 do you think it will be able to ota update? because as of now I filled in profile 1 and 0 with all the correct info. I know my sprint and boost ha and AAA I got them from the donor. I filled all that in as hex in qpst. I am going to try and delete profile one and set everything up the way your guide wants then hopefully it gives me a hands free activation prompt
Not a something i will talk about on here.. But feel free to email me or comment on there, or pm
Sent from my SPH-D710 using XDA
okay cool got it, well either way i tried then end part of your guide thing as that was what i needed. But to no avail I had a different error and it said connection error. So i was forced to put all my settings back to what I had to get 3g back.
I dunno its just really weird being unable to ota update. Its funny though after all that tinkering I just ran a speed test and hit almost 2.5mbps down its crazy. But i know once i travel away from this tower ill be stuck with crap speeds again...
oh and now it is saying unknown error after changing setting and setting it back to what i had originally..frekin weird
okay i had perfect 3g connection before i had youtube streaming fast and webpages loading really fast. Now my 3g is no bueno i have connection time outs and slow downloads speeds and buffering is all i get when trying to watch youtube over 3g. So what ive done so far
First i went straight back to stock and factory resetted everything on Gingerbread and did my OTA official updates than did update prl and profile in settings status update but my data connection over 3g is still slow so i did the next thing
##72786# SCRN reset
##3282# (checked all my settings) Device ip says 0.0.0.0 dont know if thats right the other info dont know if thats right either only able to VIEW and EDIT seperate fields one at a time
##MSL#(even put in a new MIEID number from sprint)
then onstart up hands free activation is running sucessfully it updates prl and check for firmware.I then open up sprint zone to chck voice and data both are green however there is a message of an very important profile update available please click here to have full coverage of your data so i click it and i get error cant update profile please try again later.So i keep trying and eventually it updates and says settings have been applied updating content. when i reopen the sprint zone voice and data turn green but the darn profile update for full data services is still there. So i power off pull battery and continue getting same results. The data profile isnt sticking even when it says its been updated. My 3g internet is still slow. Ive also done factory resets from the recovery menu.Sprint even re-pushed my connection off on then pulled battery to see if signal issues were an issue.
so then i do ##rtn# but still the same results. I have tried different modems as well to see if that was the case but no cigar.
Im currently on FH13 ICS 4.0.4 Official stock sprint. the sprint tec support suggest me to go into a store for further troubleshooting cause thats all they can do however i think theres more i can do here just need a little help. I know theres a bunch of more menues i can enter the codes are from this website below. I hope someone can help me with specific correct configurations in the data profile section because this phone doesnt give you the option to reset to default in your data menu just edit and view. Thank you in advanced
http://www.cellunlocker.net/blog/2011/07/samsung-galaxy-s2-secret-codes/
Thier wasnt any outage on my network or construction over here either
Don't pay attention to it's a bug in Sprint Zone it always will say there's an update. Update PRL and Profile in Settings and you're good. About speed maybe a network problem in your area it happens to me yesterday PRL Update failing and eventually updated after a few hours also speeds went back I called Sprint and indeed it was a tower problem in my area.
They will tell you there's not outage if no one is reporting. It happens a lot here in PR and when I pass by the tower in Hatillo there are workers on the tower. Lol they know nothing about their own towers.
Sent from my SPH-D710 using Tapatalk 2
k cool
No4g4Me said:
k cool
Click to expand...
Click to collapse
Yeah, what Omar said. Plus Sprint zone is ugly as hell. I can't believe sprint allows such hideous application. Have you seen the boost zone? it's so beautiful.
Lets theme Sprint Zone!!! Lol.
Sent from my SPH-D710 using xda premium
Mattix724 said:
Lets theme Sprint Zone!!! Lol.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Leave it to team themers, ugh I mean team devs, to take care of that...
Being that it's Sprint, more than likely it's just their horrible service. If you call them they will probably just give you an excuse like a tower down or something. I have constant issues with their data speeds and signal and this what they always tell me.. .
Sent from my SPH-D710 using XDA
im using a signal boost app thats from market. https://play.google.com/store/apps/details?id=com.freshnetwork
and its fixed my youtube streaming over 3g don't know why it takes an app to do whatever its doing for a signal im already supposed to have.
Sent from my SPH-D710 using Tapatalk
but what also is funny is that im using a app called landroid which lets you poke around your network and see information by entering your IP so i did and i got this off a ping......
10 packets transmitted, 0 received, +1 errors, 100% packet loss, time 9007ms
this cant be right though because im using 3g right now to write this post shouldn't i be unable to reach through with these results?
i ran a busybox ifconfig and got the results i should have no packets lossed maybe i entered the ip wrong or its one of those loop traces idk it said ip so thats what i used in landroid regardless still got good 3g any tec want to fill the slots for me please thanks.
No4g4Me said:
im using a signal boost app thats from market. https://play.google.com/store/apps/details?id=com.freshnetwork
and its fixed my youtube streaming over 3g don't know why it takes an app to do whatever its doing for a signal im already supposed to have.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
I didn't really notice an improvement with this app...
Sent from my SPH-D710 using XDA
it improved for a couple of hours then went back down.
Sent from my SPH-D710 using Tapatalk
im looking into traceroutes and flushing dns thier has to be something slowin it down. Google time
Sent from my SPH-D710 using Tapatalk
I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.
10 Post BS
wildcrackshot said:
I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.
Click to expand...
Click to collapse
Well I guess this is what I get for having to deal with this 10 post rule. This would be so much better if I could just ask my question in the Rom's thread so people would ACTUALLY SEE IT!!!!!
Have you tried resetting you data? ##786#..
Edit: you will need your msl #..
http://i.imgur.com/8KP7ZJx.png
wildcrackshot said:
Well I guess this is what I get for having to deal with this 10 post rule. This would be so much better if I could just ask my question in the Rom's thread so people would ACTUALLY SEE IT!!!!!
Click to expand...
Click to collapse
Just keep replying :good:
Sent from my PG06100
Try this and let us know if it worked
ImEVO said:
Have you tried resetting you data? ##786#..
http://i.imgur.com/8KP7ZJx.png
Click to expand...
Click to collapse
Sent from my SPH-L710 using xda premium
MSL#
jonapunk said:
Try this and let us know if it worked
Thanks for the replies all. I have done the suggested troubleshooting as follows
1: did a fresh install of the ROM (after wiping EVERYTHING first)
2. went through setup of the device (just to verify 4G was still not working, which it was not)
3. went to dialer and input ##486#
4. chose the reset option
5. entered my MSL # and then the phone did a factory reset.
When the phone came back up I had to go through the setup again, and had to turn on wifi to get through it because the data was still not working.
Also if anyone comes accross this and wants to know how to get the MSL # download a terminal emulator from the market and input "getprop ril.MSL"
Or check out this thread - http://forum.xda-developers.com/showthread.php?p=28182339
Also while investigating the MSL further I found this possible solution-
"The phone needs to be re-provisioned as follows ##72786# or ##SCRTN# the phone may restart twice, after the restarts, launch a browser and type in your phone number on the prompt."
After following this, when I opened the browser I was not prompted to input anything I was only greeted with a connection error. :crying:
I am still searching for more answers. I am exploring ##DATA# but there is more in here than I am familiar with so I will hold of on this until I know what I am doing.
In the mean time 3G works so I am still able to use my phone just wish I could tether my 4G to my laptop.
Any other ideas are more than welcome.
Wild
Click to expand...
Click to collapse
Well, I just flashed v1.3 and it is working flawlessly, everything is working great. I just think my hardware version is conflicting with the latest v2.0 for some reason. I am out of ideas. I'll stay on v1.3 for now I guess.
Sent from my SPH-L710 using xda app-developers app
I have had the same exact issue and have not found a fix yet. It only happens with certain roms.
wildcrackshot said:
I have downloaded and done a clean install of the latest ROM from Team-Venom "Wicked Sensations v2.0" First of all the ROM is so in depth, and runs smoother than any other ROM I have used in the last year. There is only one issue. The only way I can use mobile data is if I switch the mobile network to CDMA, 4G LTE does allow me to send and receive phone calls but no text messages, or any data whatsoever. . I have read all of Team Venom's thread, well most of it anyways, and I cannot find anyone else having this issue. I am aware of the rules of the forums, so I am posting this under the Q/A as not to bog down or step on anyone's toes, in the developers thread.
Is there a fix for the 4G data issue, or is it just my phone? I have tried everything I can think of such as..
Flash stock Kernal
Flashed the latest radios
flashed the latest PRL's (not sure what that would do but I did it anyways)
tried toggling airplane mode on and off.
Since nobody else is having this issue, I am not sure what else to try. also, when I am using LTE, I DO NOT have the 4G icon next to my signal bars, like I do when I am on 3G.
Before you ask, yes, I do in fact live in an area that does have 4G, I am in Kansas City Kansas.
Anyone with an idea or know how I would be grateful.
BEST ROM I HAVE EVER USED!!!!!!! :good:
Wild.
Click to expand...
Click to collapse
Tha'ts weird, I just checked mine and it says global network. I switched it toe CDMA LTE and it works. Even sent a test text message to the wife phone and have no issues.. O here might be the issue. If you go to ##3282# under view then advance, see if LTE is enabled or disabled.. If it is enabled then I bet that is why you do not get 4G service.. I believe LTE does not have 4G service just 3G.. I have done this and my 4G went to 3G after enableing it.. If you have it disabled you will get 4G service..
That is a good idea but even then you have to wait five min. inbetween lol why couldn't I remember my old login that would be way easier
Sent from my SPH-L710 using xda premium
Well I have finally been able to get 4G data working on v2.0!!!
1. Wipe EVERYTHING
2. Flashed sensations v1.3
3. Reboot phone into recovery
4. Flashed v2.0
5. BEFORE REBOOTING OUT OF RECOVERY, Flash latest sprint radios
6. Reboot phone one last time
This has made 4G data work for me.
Im in the car right now, will try to remember to post a link to the latest radios. And PRL Updates. Those are nice to have too.
Sent from my SPH-L710 using xda app-developers app AND 4G FROM SPRINT
jjerome1979 said:
That is a good idea but even then you have to wait five min. inbetween lol why couldn't I remember my old login that would be way easier
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
What are you talking about?
Sent from my SPH-L710 using xda app-developers app
This is what I did and it seemed to work. I switched to cdma only then update profile and prl. Then when I switched back to cdma/lte everything seemed to work fine.