I'm just wondering that! Will Defy's CM7 work on Defy+ too?
The two phone are the same so the answer is yes
Sent from my MB525 using XDA App
But there is a slight difference in the process. Defy uses a 800MHz Cortex-A8 processor, TI OMAP3610 chipset but Defy+ uses 1 GHz TI OMAP 3620 processor!
Will it support then?
অবশ্যাই চলার কথা..আমি দেখছিলাম কোন জায়গায় জানি...সিএম৭ এর লিস্টে ডিভাইস এর নাম নাই তবু ইনস্টল হইছিল
saiftheboss7 said:
But there is a slight difference in the process. Defy uses a 800MHz Cortex-A8 processor, TI OMAP3610 chipset but Defy+ uses 1 GHz TI OMAP 3620 processor!
Will it support then?
Click to expand...
Click to collapse
You haven't been reading the forums carefully... The Defy and Defy+ uses exactly the same TI OMAP 3630 chipset clocked at different speeds, Motorola just wants you to think otherwise... every other hardware is also same except Defy+ has a higher capacity battery.
If Defy+ ROM works on Defy, than Defy ROM will work on Defy+ (i could be wrong tho, we never know for sure until the Defy+ comes out)
saiftheboss7 said:
But there is a slight difference in the process. Defy uses a 800MHz Cortex-A8 processor, TI OMAP3610 chipset but Defy+ uses 1 GHz TI OMAP 3620 processor!
Will it support then?
Click to expand...
Click to collapse
Officially the defy uses the 3610 + GFX-chip. The 3620 is just that.
The Motorola Update-WSoftware recognizes the defy as 3630 which in turn is even better than the 3620.
Even if theyd use different chips they are still from the same line and should work with the same software without further changes.
I am pretty sure that cm7 should work on the defy+.
Nevertheless i would wait for approval before ordering it. Perhaps the defy+ comes with an unlocked bootloader which could also be used on the normal defy.
If thats the case, the only reason to buy a defy+ would be the slightly larger battery capacity.
I would seriously consider getting a normal defy as it comes a lot cheaper.
I would buy the Defy+ if the price are pretty much similar with Defy. (I saw preorder for defy+ has been started in UK for £246 including VAT). If the price remains in this range I'll consider Defy+ rather than Defy.
just wondering will defy + battery fit in motorola defy nd if yes can we use it without any issues .....
GaganPla said:
just wondering will defy + battery fit in motorola defy nd if yes can we use it without any issues .....
Click to expand...
Click to collapse
It fits, but you have to use a defy+ rom then, because it has a higher voltage than the defy-battery. CM7 still doesn't work, because you can't use the new battd with it, which is required to fully charge the new battery. Using a defy-rom you only get about 80% of the capacity.
carstenx90 said:
It fits, but you have to use a defy+ rom then, because it has a higher voltage than the defy-battery. CM7 still doesn't work, because you can't use the new battd with it, which is required to fully charge the new battery. Using a defy-rom you only get about 80% of the capacity.
Click to expand...
Click to collapse
i have install this rom "[Flash_SBF] New 2.3.3/ 4.5.1-112 Rom For Defy." and greenlense mod i think this is defy + rom ....is it ....if yes than can i use the defy + battery?
can i use the defy + battery on cm7? with the defy phone?
where is the defy + rom?
For me on defy + cm7 will not work, battery was charge only to 84%. Because cm7 have battd for old defy, if I replace battd from original defy + rom to standard cm7 based on the old defy ROM then I got question mark in battery icon and I can't charge battery.
Sent from my MB526 using Tapatalk
Related
I found this video with the new LG-LU3000 Android device with OMAP 3630 CPU at 1 Ghz. In the video can see that the new LG is faster than Samsung Galaxy S and iPhone!!
I hope that the custom ROM will come soon!! (with OC)
Source: en.akihabaranews.com/74638/phones/lg-lu3000-world-fastest-smartphone-yet
I can't post direct links, sorry
Maybe i'm wrong but omap3630 go up to 800 mhz not 1ghz. Instead, omap3640 reaches 1ghz.
take a look here, but there are many other sources, just google for omap36xx.
http://en.wikipedia.org/wiki/Texas_Instruments_OMAP
Btw, defy itself is equipped with 3630, motorola's specifications say 3610 but they also include a powerVR graphic chip (which is ONLY present in 3620, 3630 and 3640 processors), so it's clear it can't be 3610.
Then i agree with your, TI cpus are great, in my opinion a lot better than qualcomm.
The Defy one is underclocked afaik.
If you check your wiki-link and and follow the Cortex A8 reference, it clearly states the CPU supports everything between 600Mhz and 1Ghz+
Overclocking should start beyond that point, because the CPU supports the mentioned speed already...the defy doesn't use it to increase the battery-life.
Yes i see, 600 to 1000 mhz. I was not 100% sure so i wrote "maybe i'm wrong".. but this is better than i expected.
So, defy + froyo + overclock to 1ghz =
I'll be happy enough with 2.2 and without overclocking. Also, FWIW, the processor range according to android system info (market app), the processor can run at 300, 600 and 800 mhz. My defy is scoring higher than the SGS as it is on quadrant.
I love the defy. My first and as of now favorite android phone. Not as pricey as some of the "top end" android devices, just as fast and powerful (moreso in a lot of cases), rugged, great battery life. I'm hooked! It's a mini beast!
MTDG said:
Overclocking should start beyond that point, because the CPU supports the mentioned speed already...the defy doesn't use it to increase the battery-life.
Click to expand...
Click to collapse
I'm afraid you're wrong.
Just because the CPU supports a 600-1000MHz range, that doesn't mean that it will use the same amount of power at those speeds.
If you look at the likes of desktop and laptop CPUs, they down-clock to reduce power usage when there's less load on them.
So, yes, Motorola's decision to clock the CPU at 800MHz instead of 1GHz may well be a decision to save battery life.
That's what i wanted to say
Sry for my bad english :x
is there any way to overclock to 1G? using setcpu?
Is there any good reason to overclock it?
Motorola droid 2 overclocks at 1.4Ghz stable at 72-76 Vsel ( i seen ) but our defy's can't do that frequency, inclusive with 80vsel still not stable...
There is any reason? why droid 2 can, but defy doesn't.. in "teori" defy have an omap 3630, the same as droid 2.
Maybe something on the driver? or simply hardware limitation?
thanks
Because that Phone has a CPU that has already a higher default clock.
Even if it is the same CPU, the chip used in the Defy mostly just didnt
meet the required parameters for 1 GHz and was stamped 800 MHz.
So you will in most cases not be able to go that far in OC.
tomeu0000 said:
Motorola droid 2 overclocks at 1.4Ghz stable at 72-76 Vsel ( i seen ) but our defy's can't do that frequency, inclusive with 80vsel still not stable...
There is any reason? why droid 2 can, but defy doesn't.. in "teori" defy have an omap 3630, the same as droid 2.
Maybe something on the driver? or simply hardware limitation?
thanks
Click to expand...
Click to collapse
I haven't tried yet 1,4 Ghz.
Now i'm at 1,3 Ghz stable...
Have you tried higher vSel values?
Sent from my MB525 using XDA App
WoooooooW, what can be done with my NEW defy
-={antibyte}=- said:
Because that Phone has a CPU that has already a higher default clock.
Even if it is the same CPU, the chip used in the Defy mostly just didnt
meet the required parameters for 1 GHz and was stamped 800 MHz.
So you will in most cases not be able to go that far in OC.
Click to expand...
Click to collapse
im sorry but Chinese defy runs by default at 1ghz, and with the same Vsel as default 800Mhz....
I don't care about this... but i'm still thinking there is any way to overclock safetly at 1.4Ghz and more like the Droid 2.
Example, HTC HD2, in his time the max overclock at 1.2Ghz ( maximum stable ) and now is stable at 1.5Ghz.... you don't believe? search on hd2 forum...
tomeu0000 said:
im sorry but Chinese defy runs by default at 1ghz, and with the same Vsel as default 800Mhz....
I don't care about this... but i'm still thinking there is any way to overclock safetly at 1.4Ghz and more like the Droid 2.
Example, HTC HD2, in his time the max overclock at 1.2Ghz ( maximum stable ) and now is stable at 1.5Ghz.... you don't believe? search on hd2 forum...
Click to expand...
Click to collapse
AFAIK Chinese Defy (ME525) also run at 800Hz by default.
Defy may have same CPU as Droid2, but even same CPU of different production batches often have different overclockability.
ABC_Universal said:
AFAIK Chinese Defy (ME525) also run at 800Hz by default.
Defy may have same CPU as Droid2, but even same CPU of different production batches often have different overclockability.
Click to expand...
Click to collapse
Maybe the overclock is not 100% factible.
The pone is precintated to resist wather, and overheats easy.
Well, i'm happy with my 1.3Ghz at 64Vsel.
hey people i just wanted to know that as we all know DEFY got 2.2 late...compared to others...and thats all for it....
Will this happen in MOTOROLA DEFY+ ???
Keeping the recent Google-Motorola ties in mind, hopefully not.
Sent from my MB526 using Tapatalk
this question has been asked so many times... lolz...
when im going to buy a phone, all i am concerned about is are there lots of good devs... and not will whatever-company release an upgrade... Custom ROMS are always better than stock
defy+ is just a defy with red lense an slightly stronger accu
ronson3ronson said:
defy+ is just a defy with red lense an slightly stronger accu
Click to expand...
Click to collapse
And faster cpu
The point is: it's incredibly cheap, in germany it's 269 Euro, that's why I already preordered it. Right now, thats about 20 Euro more than the Defy.
Since google is now involved, I really hope to see some improvements in motorolas update policy. But that might take some time...
carstenx90 said:
And faster cpu
The point is: it's incredibly cheap, in germany it's 269 Euro, that's why I already preordered it. Right now, thats about 20 Euro more than the Defy.
Since google is now involved, I really hope to see some improvements in motorolas update policy. But that might take some time...
Click to expand...
Click to collapse
i doubt it will have faster cpu then defy.. When it will be released in DE ?
viper. said:
i doubt it will have faster cpu then defy.. When it will be released in DE ?
Click to expand...
Click to collapse
It does. 1GHz, the specs are already published. (just google for "defy+ specs", I can't post links) Besides the 1700mAh battery and Android 2.3 nothing changed.
Amazon says 23rd, some stores say earlier...
i don't think so. defy is very powerful. if developers find a unlocked bootloader for it, everything becomes better
carstenx90 said:
It does. 1GHz, the specs are already published. (just google for "defy+ specs", I can't post links) Besides the 1700mAh battery and Android 2.3 nothing changed.
Amazon says 23rd, some stores say earlier...
Click to expand...
Click to collapse
We get this confusion so many times... Defy and Defy+ use the same cpu, Defy is underclocked at 800mhz, Defy+ is clocked at 1 ghz... Defy can be easily and safely clocked to 1ghz, thus makin it the same as Defy+... IT IS THE SAME HARDWARE
pachuau86 said:
We get this confusion so many times... Defy and Defy+ use the same cpu, Defy is underclocked at 800mhz, Defy+ is clocked at 1 ghz... Defy can be easily and safely clocked to 1ghz, thus makin it the same as Defy+... IT IS THE SAME HARDWARE
Click to expand...
Click to collapse
Sorry, didn't know that - do you have a source? I read it's an OMAP 3610 in the Defy and a 3620 in the Defy+...
Edit: Found it...
carstenx90 said:
Sorry, didn't know that - do you have a source? I read it's an OMAP 3610 in the Defy and a 3620 in the Defy+...
Edit: Found it...
Click to expand...
Click to collapse
No. That is wrong.
http en.wikipedia.org/wiki/Texas_Instruments_OMAP#OMAP_3
Plus, the Defy also has the build-in PoverVR SGX Graphics.
http focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12835&contentId=52607
anon768 said:
No. That is wrong.
http en.wikipedia.org/wiki/Texas_Instruments_OMAP#OMAP_3
Plus, the Defy also has the build-in PoverVR SGX Graphics.
http focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12835&contentId=52607
Click to expand...
Click to collapse
Yes, I see that now... But: I'm not shure they really use the same hardware. There could really be a difference between the 3630-800 and the 3630-1000. Motorola might be buying different processors - with cpus and gpus it's quite common to downclock pieces, that didn't pass all tests, or to disable cores, that don't work correctly...
But yeah, I'm a bit disappointed... Will propably get the Defy now.
yeah... i made lots of research too before finally getting the defy.. Good Luck
pachuau86 said:
yeah... i made lots of research too before finally getting the defy.. Good Luck
Click to expand...
Click to collapse
Yet you still got it wrong.
Sure they both have 3630, but the difference is there: 3630-800 vs 3630-1000. They may come from the same wafer just like i5&i7, but don't call them the same thing.
Sent from my MB525
so is it worth it?
assuming they're really different hardware, does it mean that if a defy can go up to 1.3GHz (just guessing on this one), can the defy+ safely go to 1.5GHz?
haxabbit said:
so is it worth it?
assuming they're really different hardware, does it mean that if a defy can go up to 1.3GHz (just guessing on this one), can the defy+ safely go to 1.5GHz?
Click to expand...
Click to collapse
I don't think so, but nobody can tell... That's why I decided to wait, even when I'm like a little child when it comes to these things ;-) But I will likely get the Defy+, because for me the better LiPo battery and a guaranteed red-lens camera is worth 20 Euros.
Actually, I can't blaim Motorola for releasing the Defy+. It may be a very small upgrade, but the price is good and will probably be the same as the defy is now, in a few weeks. Blaim them for not releasing Gingerbread to the Defy.
Btw: Can one root the leaked ROMs (and therefore the Defy+)?
racca said:
Yet you still got it wrong.
Sure they both have 3630, but the difference is there: 3630-800 vs 3630-1000. They may come from the same wafer just like i5&i7, but don't call them the same thing.
Sent from my MB525
Click to expand...
Click to collapse
thanks for correcting me, racca, and i like your work on the dual os very much
yeah its not EXACTLY same, but TI OMAP 3630 800mhz, clocked at 1ghz, runs smoothly without any glitches, in my opinion (which is not worth much) its the same as TI OMAP 3630 factory clocked at 1ghz, which has no additional features except the higher clock speed. IMHO, its not the same case as i5 & i7 (Lynnfield and arrandale; bloomfield is a different beast) which have different sets of features (hyper threading, etc)
so i doubt the hardware of Defy+ will be any much different, they probably just overclocked it (or rather the defy was underclocked) from the kernel... am not an expert, am not trying to be a smart ass, just my opinion
i could be quite wrong though, never know until we can actually get our hands on the defy+, but for me its not worth the wait and extra cost (the Defy was on a very huge discount 34% off, otherwise its out of my budget range, really wanted the Defy+ too)
but if you can wait, and if the selling price is not much different, then the larger battery and stock GB, stock 1ghz, maybe some fixes such as earpiece, and hoping for a better usb port flaps, is something worth waiting for...
carstenx90 said:
Btw: Can one root the leaked ROMs (and therefore the Defy+)?
Click to expand...
Click to collapse
i think rooting is possible for the leaked GB roms on Defy (not Defy+) but downgrade is not possible (but who would wanna downgrade?? right )
As for Defy+, its all just speculations at the moment, the bootloader may be changed, maybe new locks, or maybe its under google now, so unlocked??
But isn't the defy + the defy with red lens released a few months ago??
haxabbit said:
if a defy can go up to 1.3GHz (just guessing on this one), can the defy+ safely go to 1.5GHz?
Click to expand...
Click to collapse
Its still the same Armv7 structure perhaps the same chipset so no.
Sent from my MB526 using Tapatalk
I was passing time at GSM arena when i noticed the Defy+ in their phone list:
http://www.gsmarena.com/compare.php3?idPhone1=3514&idPhone2=4098
They have really changed the processor?
And this battery of 1700 mA?? I want one of these...
Any new on this "new" phone?
Cheers!
Same processor just not underclocked like the defy is (if I remember correctly)... it's pretty much the same phone. Which sucks.
Sent from my MB525 using XDA App
Cept for an improved GPU and a bigger battery it doesnt offer much over the Defy.
Sent from my MB525 using Tapatalk
improved gpu? what are you talking about? it has the same powervr sgx530 chip, because its the same processor too... and the new battery fits in the defy, so theres really no sense upgrading from defy to defy+.
sent from my cm7 defy...
me too noticed this just today while searching for my first moto phone details...
a one to one comparison shows the cpu is 3610 vs 3620 in +
and the increased battery rating...
all in all same but not much os a + to get one to upgrade....
had it been a 1.2 / 1.5 Ghz with a 4" screen... thing would have been worth an upgrade... maybe...
desihu said:
me too noticed this just today while searching for my first moto phone details...
a one to one comparison shows the cpu is 3610 vs 3620 in +
and the increased battery rating...
all in all same but not much os a + to get one to upgrade....
had it been a 1.2 / 1.5 Ghz with a 4" screen... thing would have been worth an upgrade... maybe...
Click to expand...
Click to collapse
And again, 3610 and 3620 are just market numbers, those models do not exist. All of them are 3630 but clocked at different speeds.
3630 - 800 Mhz
3630 - 1000 Mhz
3630 - 1200 Mhz
There is no difference on Instructions Sets, technology, or anything, all are ARMV7 with the only difference beign the Mhz
Want a Defy+? get the battery and Overclock your Defy to 1000 Mhz
I meant CPU. Autocorrect pawns me often! Its not an upgrade yet a good replacement for old users looking forward to stick with the Defy brand.
Still a sham for the least they could do was include a front camera not making Gingerbread pointless.
Sent from my MB525 using Tapatalk
At first I was frustrated that they were releasing such an improvement from the Defy, but the difference isn't THAT much, just the OC and the battery. So I'm fine with my Defy. After all, we can still do stuff with this right?
Sent from my MB525 using XDA App
Zephyrot said:
And again, 3610 and 3620 are just market numbers, those models do not exist. All of them are 3630 but clocked at different speeds.
3630 - 800 Mhz
3630 - 1000 Mhz
3630 - 1200 Mhz
There is no difference on Instructions Sets, technology, or anything, all are ARMV7 with the only difference beign the Mhz
Want a Defy+? get the battery and Overclock your Defy to 1000 Mhz
Click to expand...
Click to collapse
So it wold be allrigth to our defy to run at 1200? Its processor was made for that? Or we maybe would have some heat issue?
Found the 1700mAh battery for sale at Mugen power... Kind of expensive. I'm flearting with it now.
Just to be clear, i never even considered an "Upgrade" for the Defy+. I just want my phone to be as fast and the battery last as much as it could!!
Thanks a lot for all replies!
Can't say if the chip was tailormade for that frequency as it does heat up a bit after a while but yes its still safe.
Sent from my ME525+ using Tapatalk
evilinheaven said:
So it wold be allrigth to our defy to run at 1200? Its processor was made for that? Or we maybe would have some heat issue?
Found the 1700mAh battery for sale at Mugen power... Kind of expensive. I'm flearting with it now.
Just to be clear, i never even considered an "Upgrade" for the Defy+. I just want my phone to be as fast and the battery last as much as it could!!
Thanks a lot for all replies!
Click to expand...
Click to collapse
Yep what ryan8r said, I dont know if it was made to run a 800 or 1200.
I do run mine at 1100 since I bought it (couple months ago) at vSel 54 and it doesnt heat up, works wonders.
evilinheaven said:
Found the 1700mAh battery for sale at Mugen power... Kind of expensive. I'm flearting with it now.
Click to expand...
Click to collapse
I ve got that battery and I have to say that on any froyo and any custom roms 2.2 the improvement was really visible, however, currently im on MotoGinger and I only get 2 days of battery and that s a maximum. its probably my fault because recently I cant be arsed playing with a phone
any other "rugged phone" suggestions? currently im still using the galaxy spica on my mtb rides mainly for its gps function... with this i can still take pictures even when its raining....
I meant CPU. Autocorrect pawns me often! Its not an upgrade yet a good replacement for old users looking forward to stick with the Defy brand.
Still a sham for the least they could do was include a front camera not making Gingerbread pointless.
Click to expand...
Click to collapse
ooops, sorry i missed this post before inquiring
just see Texas Instruments site.
Processors are not the same!
OMAP 3610: no 2D/3D graphics accelerator POWERVR SGX™
balanki said:
just see Texas Instruments site.
Processors are not the same!
OMAP 3610: no 2D/3D graphics accelerator POWERVR SGX™
Click to expand...
Click to collapse
Refer to sixth post in this thread. Motorola lied, both defy and defy+ have the 3630
Reason is that it is well known that defy and defy+ both have the same gpu that the specs say the 3630 has, and the easy overclocking to 1300mHz...
Sent from my MB525 using XDA App
I have already defy+ and run on it "Quadrant test" and it shows me that I have same processor like Defy "ARMv7 Processor rev 2 (v7l)" The difference is that my is on 1GHz and Defy is 800Mhz....
Hi,
I want to overclock my Defy +, but I don't know what values put in SetVsel.. can you help me please ? Thanks
http://androidunderground.blogspot.hu/2011/05/setvsel-overclock-and-undervolt-your.html
zakoo2 said:
http://androidunderground.blogspot.hu/2011/05/setvsel-overclock-and-undervolt-your.html
Click to expand...
Click to collapse
Thanks but I have a DEFY + not a Defy
RaphaelH1427 said:
Thanks but I have a DEFY + not a Defy
Click to expand...
Click to collapse
oh my bad, then maybe you should start with telling me what the differences are, you surely know better...
it is really my fault, as defy and defy+ are two completely different phones with different hardware and should also be treated differently...
or just accept the fact that they are the exact same phone, and you can overclock them the same way... -.-'
maybe next time you should search before posting stupid questions which have been answered hunders of times and maybe you dont have to tell someone off who has more knowledge in the field than you... your ignorance pisses me off... good luck with others helping you!
zakoo2 said:
oh my bad, then maybe you should start with telling me what the differences are, you surely know better...
it is really my fault, as defy and defy+ are two completely different phones with different hardware and should also be treated differently...
or just accept the fact that they are the exact same phone, and you can overclock them the same way... -.-'
maybe next time you should search before posting stupid questions which have been answered hunders of times and maybe you dont have to tell someone off who has more knowledge in the field than you... your ignorance pisses me off... good luck with others helping you!
Click to expand...
Click to collapse
Hey dont be mad i didn't want to offend you
You say that they are the same but DEFY is 0.8ghz and DEFY+ is 1ghz (and they have not the same battery but I think we dont care here isn't it ?),
then the values will not be the same isn't it ?
Overclocking would be :
DEFY is 0.8ghz to 1ghz
DEFY+ is 1ghz to 1.2ghz
No ?
Sorry Im new and French..
But don't be mad I didn't want to offend you
RaphaelH1427 said:
Hey dont be mad i didn't want to offend you
You say that they are the same but DEFY is 0.8ghz and DEFY+ is 1ghz (and they have not the same battery but I think we dont care here isn't it ?),
then the values will not be the same isn't it ?
Overclocking would be :
DEFY is 0.8ghz to 1ghz
DEFY+ is 1ghz to 1.2ghz
No ?
Sorry Im new and French..
But don't be mad I didn't want to offend you
Click to expand...
Click to collapse
Dude, you can use the same values on both phones, have the same processor, and the same hardware actually, except for the battery.
Bleak3993 said:
Dude, you can use the same values on both phones, have the same processor, and the same hardware actually, except for the battery.
Click to expand...
Click to collapse
Ohh ok thank you so if I understand well Motorola have overclocked Defy+ to 1GHz by defaut ?
But we still can overclock it more ? 1200MHz is good isn't it ?
Defy and Defy+ have not the same chipset (TI OMAP 3610 and TI OMAP 3620 I've saw that on http://www.gsmarena.com)) but same CPU you are sure ?
RaphaelH1427 said:
Ohh ok thank you so if I understand well Motorola have overclocked Defy+ to 1GHz by defaut ?
But we still can overclock it more ? 1200MHz is good isn't it ?
Defy and Defy+ have not the same chipset (TI OMAP 3610 and TI OMAP 3620 I've saw that on http://www.gsmarena.com)) but same CPU you are sure ?
Click to expand...
Click to collapse
yes, i think the 36"10" and "20" it makes reference to the underclock or overclock, you can overclock this cpu up to 1400, or more i think, but you can risk your cpu lifetime, 1200 is the maximum clock that you can overclock without damages (like droid 2 global), in any case, for a normal user, 1000 is enough, or 1100 maybe, but on 1200 or more, your battery wont last long.
RaphaelH1427 said:
Ohh ok thank you so if I understand well Motorola have overclocked Defy+ to 1GHz by defaut ?
But we still can overclock it more ? 1200MHz is good isn't it ?
Defy and Defy+ have not the same chipset (TI OMAP 3610 and TI OMAP 3620 I've saw that on http://www.gsmarena.com)) but same CPU you are sure ?
Click to expand...
Click to collapse
there is no such thing as omap 3610 and 3620, only 3630, which is present in both defy and defy+ (btw, this is the processor, not the chipset... or both, but it is used to reference the cpu). and you can easily overclock the defy to 1.2 and even above that. my phone (normal defy) was running stable at 1.35GHz, so dont be afraid to OC to 1.2GHz!
Thanks guys so im gonna overclock it to 1.2ghz with vsel calculator and setvsel i hope my phone is gonna be faster
Bug message need to be deleted
Ok its done my MB526 looks faster in game, im im happy but why when i reboot values come back by defaut ? set @ boot is on... Please help :-\
Sent from my MB526 using xda app-developers app
RaphaelH1427 said:
Ok its done my MB526 looks faster in game, im im happy but why when i reboot values come back by defaut ? set @ boot is on... Please help :-\
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
set it in bootmenu, and forget setvsel. i bootmenu, change frequencies/vsels to the values you like, and i recommend changing to either boosted or smartass governor, and dont forget to save at the bottom!
i have used setvsel for months, but it doesnt make sense to have an app for doing what the built-in bootmenu already can, it just takes space in both rom and ram.
Ok Thanks you very much dude, ill try to do it
Im Just back from the Bootmenu i dont understand anything lol, ill try to find a good tutorial
set these:
vsel1: 17 freq1: 300
vsel2: 32 freq2: 600
vsel3: 47 freq3: 900
vsel4: 62 freq4: 1200
governor: smartass (or boosted, try them both out and choose the on you like more)
go to the bottom and save, reboot!
sent from my jellybean defy...
Thanks you sooooooo much !!
I'll try later because my battery is empty
Ok I done everithing it works
But 2 questions:
1. You said me to put those values because they are your favourites ones or because you found them somewhere ?
2. What's the difference between Smartass and Boosted ? And I heard about Smartass v2, should I install it ?
Thanks you so much !
You still here zakoo2 ? ^^
RaphaelH1427 said:
Ok I done everithing it works
But 2 questions:
1. You said me to put those values because they are your favourites ones or because you found them somewhere ?
2. What's the difference between Smartass and Boosted ? And I heard about Smartass v2, should I install it ?
Thanks you so much !
Click to expand...
Click to collapse
about a year ago i spent quite a lot of time testing cpu settings and i figured out a formula for setting vsel for a specific frequency: vsel=(MHz/20)+2
this is stabil for most people (theres even an app based on this formula ).
to know more about governors, read http://forum.xda-developers.com/showthread.php?t=1369817!
about smartassv2, it has been implemented into the quarx nightlies with the name boosted, so no need to flash.
although i still flash the original zip, because that flashes sio scheduler too.