Develop Bugs

help with ROM upgrade and problems with SIM

Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!

micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).

Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...

micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.

Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?

i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work

[SOLVED] Touch Diamond Help - No Network after hard reset

Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.

can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems

Have you gone to start/ settings / connections "connection setup"?

Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active

NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM

When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description

I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please

Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??

hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?

I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)

@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?

As its unlocked by code i would recommend you to flash a shipped rom !

Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious

if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...

I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.

FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.

Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?

FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here

Trouble Installing Hard-SPL

i have tried installing Unsigned-Hard-SPL-Diamond-OliNex 1.40 version i think, and i have tried plenty of other versions to. but i keep getting the same error 244 invalid model id.
i have tried instructions on this http://forum.xda-developers.com/showthread.php?t=409425 page but i dont think it is for installing a hard spl, i think it's talking about installing a rom.
i have a stokc AT&T FUZE,
Device name : HTC_P4600
ROM version: 1.95.502.5
Radio Version: 1.02.25.32

brains1111 said:
i have tried installing Unsigned-Hard-SPL-Diamond-OliNex 1.40 version i think, and i have tried plenty of other versions to. but i keep getting the same error 244 invalid model id.
i have tried instructions on this http://forum.xda-developers.com/showthread.php?t=409425 page but i dont think it is for installing a hard spl, i think it's talking about installing a rom.
i have a stokc AT&T FUZE,
Device name : HTC_P4600
ROM version: 1.95.502.5
Radio Version: 1.02.25.32
Click to expand...
Click to collapse
If I look at your signature I'd say you have a Raphael (TouchPro) and not a Diamond. Try searching the Raphael forum. Here's the link to the HSPL thread: http://forum.xda-developers.com/showthread.php?t=410150

Help htc touch diamond 2 flashing.
I NEED HELP :s:s:s IM HAVING DIFFICULTIES WITH ROMS AND SO ON! I GOT A HTC TOUCH DIAMOND 2 ALL I WANT TO DO IS INSTALL THE WM6.5 BETA ON IT, CAN SOMEONE PROVIDE ME WITH SIMPLE INSTRUCTIONS ON WHAT TO DU I HAVE NO CLUE WHAT SO EVER,
I TRIED DOING HARD SPL USING THAT OLIPEX 1.40 BUT IT SAYS INVALID ID?

brains1111, youe device is htc raphael aka touch pro. use propper hspl !!!!!!!
jasmannan htc touch diamond 2 is different device that first diamond. it's htc topaz, hardspl and custom rom dont exist yet for that model !!!

jasmannan said:
I NEED HELP :s:s:s IM HAVING DIFFICULTIES WITH ROMS AND SO ON! I GOT A HTC TOUCH DIAMOND 2 ALL I WANT TO DO IS INSTALL THE WM6.5 BETA ON IT, CAN SOMEONE PROVIDE ME WITH SIMPLE INSTRUCTIONS ON WHAT TO DU I HAVE NO CLUE WHAT SO EVER,
I TRIED DOING HARD SPL USING THAT OLIPEX 1.40 BUT IT SAYS INVALID ID?
Click to expand...
Click to collapse
You are in the wrong forum.....GO HERE

htc critical error & networking is dow plz help

hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H

mohamed126 said:
hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H
Click to expand...
Click to collapse
pls get some help here
http://forum.xda-developers.com/showthread.php?t=470306
As my understanding, once you have HardSPLed your device, you can flash any Diamond radio you want.

heeeeeeeeelp jasjam dosent accept new rom & stop working

my ppc stop working & when i try to soft reset it it may have hard reset or dosent accept it till i hard reset it ... i cant flash a hard spl or a new rom on any pc ... plz he;p urgently
rom version : m2d_light
rom date : 01/19/09
radio version : 1.21.21.10
protocol version :32.53.7020.01H
extrom vesion : by josh

put your device in bootloader mode...
tell me what you see in IPL and SPL versions...
tell me what you didnt or didnt... like not flash HSPL first

hay bro
first u've to install hard spl i.e olipro 2.10 is best one. let me know have u install it before ?????????