[SOLVED] Touch Diamond Help - No Network after hard reset - Touch Diamond, MDA Compact IV ROM Development

Hi all,
I have been using this phone for a while now. Its been working very well till today. Today I tried to install some themes and they ended up occupying my full phone memory. So I did some googling and decided to do a hart reset as I didnt have any valuable software installed.
I went ahead with the Hard reset by clicking 'clear storage' and typing 1234
The phone rebooted and got my memory back and everything except that it not connecting to a network. any network.
I use the 2G version of Touch Diamond in India (GSM). It keeps saying cannot register to network. I've tried different networks with SIM cards which are working well with other mobiles and both manual and automatic network selections.
I have done SIM unlocking done in the street as soon as I got the phone, as this came packaged with Airtel. But now the phone is not registering with any network, including airtel.
My stats are
ROM : 1.93.720.2 WWE
Radio : 1.20.OliNex.
SPL 1.23-Hard
Q1 : Does that mean I have HardSPL already?
Q2 : Would re-installing my Radio solve the present problem.?
What should I be doing.

can someone please guide me. I am reading thru this forum and I dont see anyone reporting similar problems

Have you gone to start/ settings / connections "connection setup"?

Just tried doing it. I detected the settings for Vodafone which is my current network, restarted ,but it failed to register again.
The exact message was :
Network error :
Cannot register on selected network. Chose another network or disconnect data connection and try again.
I am pretty sure I have no data connection active

NAAAAAAAAAAH STOP !!!
Just enter Bootloader and write down everything you see !
Never heard of a DIAMOND 2g ? but if its an CDMA the following wouldnt apply !!!
What radio version do you have ?? 1.20 is you SPL ....
go bootloader mode (soft reset + vol down + powerbutton) and write down everything you see there ....
NOT FOR CDMA User!!!
here is the HARD SPL i recommend !
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Then try flashing one of these RADIO roms:
http://forum.xda-developers.com/showthread.php?t=432770
Then do a Hard reset
Softreset + Vol down + Enter button (the round one)
Then follow on screen (you dont need formating MovieNAND - AFAIK vol up should do)
greets

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?

Okai...
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
I was waiting to flash my radio.
Is my ROM compatible with any HardSPL and any radio or Do I have to choose carefully..?
And I am sure my Diamond is GSM

When its GSM then u can surely dump your radio rom from sticky thread on it !
Please no double threading !
just follow my short description

I have flashed my Radio to 1.00.25.05 and then to 1.00.25.07, but no luck so far. I am having the same exact issues as before.
What should I be doing, Please

Any more things I can do or should I be taking my 2 months old Diamond to the service center without a warranty ??

hmmm .. i would think its still any type of Sim lock in it, so i would try to contect cmonex / Olipro for a solution ! i think if you donate a bit they can help you with code unlocking.
Did u also Flashed another HardSPL ?
what does tri color bootloader promt out ?

I would try and Flash a new HardSPL Olipro's 1.40 is a good start rather than Jocky's 1.23 (shipped)
Then a ROM that includes a radio - perhaps DuttyThroys
Let us know how you get on...
Before you go to the shop - on the way you can always slap the man in the street that is using pirate unlocking software too - I hope you did not pay him.
links are in my signature (current...)

@Neutron,
This is what my bootloader looks like
Security Unlocked
DIAM140 64M
SPL-1.23.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
and shows 'Serial' in the white space.
ROM Version : 1.93.720.2 WWE
ROM Date : 08/07/08
Radio Version : 1.20.OliNex
Protocol version : 52.26a.25.09G
It is not SIM-Locked, I am sure of it.
@Windoze,
Mate, I was about to ask the same question..?
Since my Diamond is an India specific one (ie NO 3G, Only GSM, GPRS and EDGE), I thought of flashing the India specific ROM presently available on HTC's website which also includes radio 1.00.25.07.
so arise Q : Should I upgrade the HardSPL or shall I Flash the new ROM as it is with my 1.23 Hard..?

As its unlocked by code i would recommend you to flash a shipped rom !

Hard SPL 1.23 or 1.40..? Signed or unsigned if I am flashing the shipped ROM..?
Thanks and sorry for asking so many questions. Just anxious

if you flash your shipped rom it will be signed so no need to upgrade your spl.. dont know which u flash so i would say SPL also will be updated and you need to hardSPL after that... just give it a try ...

I am flashing the ROM with my Hard1.23 in an hour as the file is being downloaded from the HTC website. Will post results. Thanks.

FyreMasq said:
It is not SIM-Locked, I am sure of it.
Click to expand...
Click to collapse
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.

Windoze9t8 said:
I can see that by looking at the Radio version you had posted previously - I think this is the one which was part of a package leaked on the internet to unlock the Diamond.
Click to expand...
Click to collapse
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?

FyreMasq said:
I was just stupid mate, I hadn't discovered this fantastic forum at that time
BTW : Congrats to me on flashing my first ROM. Went without a glitch.
Progress update :
I have flashed the shipped ROM and radio from the HTC website and still status quo. I am not able to connect to any network.
What should I be doing next?
Click to expand...
Click to collapse
as previous post - try 1.4 olipro HardSPL and a custom ROM from here

Related

Big probleme MicroP

Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
kenshiromasters said:
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
Click to expand...
Click to collapse
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
duttythroy said:
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
Click to expand...
Click to collapse
Mine is also MicroP-Diam (LED) v11 and flashing is no problem for me. Try using Hard-SPL like Dutty suggests ...
I have exactly the same problem.
Even while updating the screen is black.
kenshiromasters, did you fix the problem?
Thanks,
Is there a solution for this problem yet?
Mine started doing the same thing today.
MicropERROR
Microp Version Mismatch 0
Please update Latest Microp Firmware
EDIT: Installed hard SPL and it didnt fix it
The same problem
Me too!
Some time, the screen in black, only can hear the music-volumen up/down.
I try battery off/on severy times to get a typical error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Hi there,
unfortunately I'm facing the same problem.
the screen effectively is black, but I can see homepage etc as it's in standby.
MAYBE, but it's only in my mind, we could fix the problem installing windows mobile 6.1 professional.
But the problem is: who has wm 6.1 professional?anyone can post the link for download?
his this been fixed? i am having the same problem!
trying to reload duttys v3.4 right now...
and yes, im using hard spl dev ed
update:
just reflashed to dutty's 3.4, still the same problem.
seems like the phone is working because it will make the power on noise when i turn it on, but the screen isn't showing anythign again.
great...nice brick i have on my hands here :|
Got the same problem after flashing Dutty´s 3.4 - after first restart display was only "very dark" that I even could read it - "microp version mismatch 0 - update microp firmware", after second reboot the display is off permanently I flashed originila stock ROM and then signed SPL but the problem is still same... Really don´t know what to do now. How to upgrade "micorp firmware"???
edited: How did You all guys have fix that?? Is there any way instead of send it for warranty repair?? Here in Czech I´m worryin about the time of repair - and guess it will take probably one month n I can´t miss my phone for so long time:-((((
So please does anbybody know if it is SW or HW problem?? If it could be solved without repair by authorized service???
Problem hasn't got anything to do with coocked roms, hardspl or whatever....I had the problem too and had original 1.37 and 1.93 stock rom on my Diamond (Dutch). Had it send to HTC's repair lab in Belgium (www.eurotwice.be) but they couldn't repair it. Got a new one because of extenden/extra warrenty I bought when I bought my phone and cellurar subscripton with my telco.....
sounds like the hermes whitescreen problems that have been solved..
my 0,02
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
keerttttt said:
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
Click to expand...
Click to collapse
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
tommm said:
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
Click to expand...
Click to collapse
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
keerttttt said:
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
Click to expand...
Click to collapse
Yep my Diamond is dead
Not "fully dead" - is detected by PC so I flashed back stock SPL and ROM - both 1.93
It seems that PDA is working, but nor display neither buttons light
Ok today I sent it to warranty service n will see...I only hope that when i was flashing back stock ROM n stock SPL without display it was succesfull
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Leeroy_ said:
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Click to expand...
Click to collapse
send it back under warranty then

Security Unlocked & 1.20.Olinex Radio Problem!!

hi guys.
i got indian 2g diamond(diam 140).
not i got it 2nd hand from someone. and i find its security unlocked and a preinstalled 1.20.Olinex radio already exists. also its hard spl 1.40.
read a few threads but nothing was much clear.
many ppl claimes that updating to any other custom rom will stop all networks and my diamond will stop getting any networks on any other roms.
i took the risk and flashed it with swtos lite rom and till now everything is working.
now i want to change the radio to somwthing better than the current one.
is it possible that this time i may lock my phone to all netwoorks??
Security Unlock is NOT sim unlock. If the guy told u that it's unlocked to all the networks already then switching radios does nothing to interfere with that.
Switch Radios and let me know how it goes.
I bought a touch diamond 'unlocked' with 1.20.Olinex, I couldn't get my network to register.
I have since paid for Oliinex's unlocking, however my fone will still not connect to ANY network. I believe Olipro is trying to help me solve the dilemna...
I would say if ur happy with ur ROM/Radio now DO NOT flash it until someone confirms that you will not brick ur phone....
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
band27 said:
Consider that it has the Olipro 1.20 it should have Hard SPL on it already. But if you can, put your device into BOOTLOADER mode (Soft Reset then press the volume down button) please write what you see on the rainbow like screen and then we can take it from there.
Click to expand...
Click to collapse
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
sunnyin86 said:
in bootloader i get:
Security Unlocked
DIAM140 MFG 64M
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
how do i know if its sim unlocked??
Click to expand...
Click to collapse
I should say that it is already Sim unlocked as the purpose of the installed Radio is mainly used for that.
dont worry,.just continue . i had the same diamond specs as yours .updated it yesterday . works like a charm!!
my post in the formatting diamond thread
. i followed TNYYNT's "[TUT]Complete upgrading guide (HardSPL+Radio+ROM) NOT FOR CDMA USERS!!!" and karkalanand's airtel upgrading guide. i have the fastest ROM aztors X2 ULTIMATE and blackstone 1.11.25.01 radio . no problems ,and 1.37 olinex dev edition
didnt brick my phone hopefully
i thank you people for giving me the real DIAMOND EXPERIENCE
band27 for that line gven above
olipro for his sim/cid/security unlocking tools
olipro+cmonex for the oLineX
TNYYNT for the wonderful upgrading guide
karkalanand for the AIRTEL diamond guide(without which i wouldnt have upgraded my diamond)
and ALPHAZERO for creating one of the fastest ROM
lastly - to XDA DEV
-------------------------
now on 2.xx AZTOR X2
bs radio
1.37 olinex
but still an INDIAN diamond !
hey. here is another problem.
i also wanted to buy diamond 3g. a friend of mine is offering me diamond 3g which is security unlocked but am not sure if its sim unlocked. only vodafone and idea networks worked on it and not airtel. so i tried updating its radio to 1.11 and also its rom to swtos lite and now even vodafone and idea is not working on it.
that is no operator network works on it now. what do i do.? also i wanted to tell u that this model is the testing model which htc released to ppl who review the device before its launched. does it makes any difference?
also is it sure that it is sim locked and OLIPRO's sim unlocker will solve my problem?

htc critical error & networking is dow plz help

hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H
mohamed126 said:
hi every body first of all i am happy to find some people who really know what to do with this diamond. i tried to flash a rom to radio rom to enable my gps because it was illegal in Egypt since two months ago so,i flashed a signed olines hard spl and tried to flash i the radio again but i failed i found out that when i put the radio.nbh on the device i got that the radio version was changed but i am not able to enable the gps till now and also my wi-fi is down also. please if anyone can interact with me while i was flashing anything that can help me either to fix my diamond (gps,wi-fi) of lead me to get my original hard spl because htc.com have been issuing a new rom that enable the gps.
sorry beacuse it was hard to explaining my problem in that long way
thank you.
hard spl: olinex
radio: 1.00.25.05
rom version:1.93.485.1 WWE
protocol version: 52.29.25.12H
Click to expand...
Click to collapse
pls get some help here
http://forum.xda-developers.com/showthread.php?t=470306
As my understanding, once you have HardSPLed your device, you can flash any Diamond radio you want.

O2 xda diamond flashing problem

I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language
make manual usbflashing threecollor settings and use normal ruu for flash.Maybe im more time use for ole htc diamond because show me message low battery but battery is full 70-80 % and im use usbsettings <threecolor menu> and flash
a_2004_81 said:
I have o2 xda diamond -but when i see the device setting it's say (htc touch diamond p3700) with ID DIAM300
rom 1.93.831.1 wwe
rom date 07/18/08
radio version 1.00.25.05
protocol 52.29.25.12h
first
i was flash my phone with hard -spL-1.37 olinex and i cant flash any rom
then i flash hard-spL-1.39 olinex .hard-spl-1.40 olinex -development verision .
When i inter boot loader it's hard-spl40 olinex
but i cant flash any rom it's error invaild id trying a lot rom wm6.1
nothing work it's closed at 1% then i see the error
then i trying flashing the rom by storege method but's not work too....
i no know what's the wrong ???
Please help me .......
Sorry for bad language
Click to expand...
Click to collapse
Hi, I also have an o2 xda ignito...Download the attached file, and extract "SSPL_Manual" onto your phone and run it, the screen will go blank...now just flash with hard spl olinex 1.93 unsigned by running "DiamonCustomRUU" and then flash the rom of your choice.
Yessss it's working now
Yes it's work . Thanks for all supporting.............

Upgrading O2 XDA Ignito

Hi every one
I would like to thank every one in this forum for all the great help & support.
I have learned a lot from here on how to tweak my 1st windows mobile
My HTC is O2-UK branded :
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
Using O2 official ROM upgrade
[Xda Ignit2_UK_2.10.206.1_Radio_Signed_Diamond_52.62.25.34_1.13.25.24_Ship.exe]
What I want to do is just put a clean ROM (may be HTC original) without all the additional software that comes with the branded ROM
The reason for this is my windows folder is filled with unnecessary stuff that I can’t delete (like opera9 & some ringtones) which is taking some precious space (file properties show it's ROM files).
My question is:
1- Which HardSPL should I use?
I’ve read this great tutorial & I’ve gathered that I need Unsigned-Hard-SPL-Diamond-OliNex & this (correct me if I am wrong)
Thanks to cozzykim for his MiniTUT but does it matter if I have SPL 2.07 & install an older version (like Unsigned-Hard-SPL-Diamond-OliNex 1.40 or 1.93) or should I wait for an upload of SPL 2.07 ??
2- Does it matter if the SPL I install is signed or not when it comes to installing cooked ROMs in this forum vs official HTC ROMs ?
3- If I want to revert back to the stock ROM for warranty reasons, can I still do that? & how ? (revert back to same SPL & ROM) ?
I've got the extracted files from the official rom which include [01_SPL.nb] which is SPL-2.07.0000, (if anyone is interested I can upload it).
So can I reinstall this in future? or just run the full official ROM.exe installer to put everything back as it was (including original SPL)?
Before any one starts flaming about searching before opening a new thread, I did search (spent two weeks reading through different posts) & I did not find any mention (or upload) of Hard SPL 2.07 (only found 1.93).
I found previous threads with similar questions not answered so thought may be it's better to open a new thread than digging & bringing up a one year old thread.
Pardon me for my noobish questions but this is my 1st flash & I am sure it will be easier afterwards but I hope answering these questions will make it easier for noobs like me & to those with XDA ignito.
Any help is appreciated & if any moderator thinks this is a repeat post & should be closed then feel free to do so.
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
thangkls said:
I have O2 Ignito and this is what I did:
1. Hard SPL - I'm using OliNex 1.40
2. Reset to bootloader to check Hard SPL .
3. Copy GSM rom to Internal Storage ( file name DIAMIMG.nbh )
4. Flash Rom ( put reset button - keep holding volume down button and back button - then release reset button ).
5. Wait until it's finish then reset.
6. Done
My fone doesn't have warranty so I don't care to roll-back to stock rom . I can't help you but I think someone can.
Good Luck !
Click to expand...
Click to collapse
Many thanks for the reply
One question though, does it matter if you have a newer SPL than 1.40?
I mean did you have the same SPL (1.40) before installing OliNex 1.40 or it doesn't really matter what version is in your phone?
(mine is 2.07 & I am not sure if it's ok to install an older version like 1.40 or 1.93)
Thanks
Ok I've done it
Same steps as thangkls
1. Hard SPL - used OliNex 1.40 [Unsigned-Hard-SPL-Diamond-OliNex].
2. Reset to bootloader to check Hard SPL .
3. Flashed with A.Z.T.O.R. Re-Evolution
& I must say, it looks great so far (especially the landscape feature).
I'll worry about the warranty later (though I think restoring a newer SPL 2.07 should work the same way, as explained here)
Thanks again for the help
Now am off to test all those ROMs .... wohoooooooo
Look at my signature:
Look at my signature
Actually this was the 2nd ROM on my list to test.
I liked A.Z.T.O.R. Re-Evolution but had to abandon due to a keyboard bug.
Gen.Y D2 R5.3 looks great with 15MB more storage space & same memory use.
No bugs so far.
Spl-2.07.0000
gsm 44
where can i get SPL-2.07.0000
previously i hav phone wid this specs
XDA Ignito
DIAM300 64M
SPL-2.07.0000
ROM version: 2.10.206.1 WWE
ROM date: 24/06/2009
Radio: 1.13.25.24
Protocol version: 52.62.25.34H_1.13.25.24
then i updated spl with hspl olinex
nd my spl changed
now i want to revert back to spl 2.07.0000
but how
i have gone back to spl 1.93 but not beyond that
ok i did it i got the spl 2.07.0000 back

Categories

Resources