Related
i have jasjar
rom 1.13.53 WWE
radio 1.03.01
protocol 42.36.P8
extRom 1.13.137
thats the newest rom, isnt it!?
as i can see, lots of people talk about radio update 1.04.02 but i cant find it!? I tried at forum links (ftp, universal folder) but there is no anything about radio!!!??
btw what about improvement, 1.03 vs 1.04 ?
regards
There you go
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Flashing Radio will loose settings in standard Rom ?
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Re: There you go
taiseer999 said:
http://www.megaupload.com/?d=7YF2JH2A :lol: :lol:
Click to expand...
Click to collapse
TNX!
Re: Flashing Radio will loose settings in standard Rom ?
Scotty said:
Hello,
Will Flashing ONLY the Radio Rom mean, that all settings will be saved, or will the device be Hard-reset ?
Kind regareds,
Click to expand...
Click to collapse
hmmm, im not sure, cant remember but i think that settings will be saved!
I have a Jasjar, which was running:
ROM version 1.13.53 WWE
Radio version 1.03.01
ExtROM version 1.13.137 WWE
I ran the radio-only upgrade, which errored the first time but ran without problem the second time. After a soft reset, I now have:
ROM version 1.13.53 WWE
Radio version 1.04.02
ExtROM version 1.13.137 WWE
All my settings/hacks were retained and no information was lost. The radio appears to be stable.
Hi, Sorry... im posting a newbie question... please ignore if "beneath" you...
Im confused on the "radio" upgrade thing. I mean, is this really the radio that we know of (FM/AM)? Why the need for upgrade? How do i make the radio work then?
Laugh all you want, read all your posts and i still dont get it.
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
can i use this to update my orange spv m5000? or is there another version for it..\
cheers
ok i've tried several times now and its not working.....
its not working for my spv m5000 either
ssn04 said:
The "radio" portion of the Jasjar is the phone/gprs componentry. The rest of the Jasjar is the PDA componentry. Because, theoretically at least, WM5 products can be PDA-only and because the radio portion of WM5 products can vary widely (differing standards for various parts of the world), the firmware is released in two parts: the base operating system for the PDA and the radio subsystem addition for the phone/gprs functions. This explanation is somewhat broad, and not 100% accurate, but hopefully provides some clarification.
Click to expand...
Click to collapse
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Thanks for the explanation.. that was tech101 for me I get it now.. It's the "phone" part then.. upgrading the radio might have something to do with connecting wifi, bt etc... and i really though i could tune in to my favorite radio station.. haha
Thanks a heap!
Click to expand...
Click to collapse
You are welcome. BTW, something like this http://www.dealsonic.com/csdsedifmstr.html would add AM-FM capability to a Jasjar if WM5 drivers are available. Note though that it would seriously truncate battery life.
FYI, the SD-Radio is the older model.
Take a look at the sleeker SD-Radio2...
http://www.c-guys.net/products/sd-radio2.html
Works
Hi,
Tha radio Rom upgrade worked Fine.
No settings have been lost. and I hope some Telphone and bluetooth problems are history now.
Regards,
Bjorn
Benefit of Radio 1.04 over 1.03?
Just got my i-mate jasjar. Wondering about upgrades but it seems to work and if it aint broke, dont fix it!!
For those who have flashed from 1.03 to 1.04, what improvements were there?
Thanx
I just updated my 1.03.00 to 1.04.10 on my Qtek 9000
The biggest improvement is the time from hitting the 'pick-up' button to the connection being established. On the older version, this took about 5-7 seconds.... on new version, this happens instantly.
Maybe it's just me, but i think the sound quality of the phonecall is improved too.
Post deleted as I managed to upgrade the radio stack successfully to 1.04.10
cheers guys
Hello
can some1 please tel me what improvement thet is withn the Radio version 1.04.10.
I've done a rom upgrade on my Xda exec the radio is still 1.04.02.
Is the radio vrsion 1.04.10 compatable with the xda exec.
Please some1 advice.
Thank You
Gigino
i have downloaded: radio_.nbf = radio rom and: MaUpgradeUt_noID.exe
put it in 1 directorie and when i run the exe i get an error can't find ruu.dll
with files do i need to upgrade only the radio and where can i find them, or what am i doing wrong..
i am a newbee
my device is a qtek 9000
i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
usman3206 said:
i flashed my HTC TRINITY P3600 with trinity update guide (TRIN_RADIO_1.38.00.11_Only_SSPL or 1.40 probably) and installed windows mobile 6.0 on my device. When i installed tomtom 6.03, it says no GPS device!. Guys help me how can i restore it?
Click to expand...
Click to collapse
OK - which RADIO do you have? - this is not clear.
You should try - Hard reset - install tomtom6.03 start up tomtom - sometimes for say 30s tomtom can say no GPS device - before the message changes to waiting for a valid GPS signal. Be patient.
Also search for "no GPS Trinity" here: http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
you should find others with the same experience as you!
Good luck.
hi,
i have read in this forum, that any Radio ROM ending in 1 have GPS enable, so you must wait a litle time (1-2minutes) before your GPS program fix the GPS signal.
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
usman3206 said:
i installed it with trinity info guide and used this radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion 1.46.00.11 GPS available on this forum? Pl help. sorry for double post, i was really confused where to put it and was really desperate for my GPS. i will be careful next time. thanks for your reply. i am trying other options
Click to expand...
Click to collapse
hey! We have exactly same problem! the radio also show 1.16.00.00 on mine!
Upgrade your radio then it should work! had a friend who had also a very old version. He got's it fixed with upgrade!
i have already replied you in the other thread where you posted this issue.. there's no need to double post this. I've posted the link to hard-spl 1.20
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Flashed With Olipro 1.20
RACERX i have flashed it with olipro 1.20 but still it shows no GPS device? even after 20 minutes of keeping tomtom on. should i upgrade rom to 1.40 GPS, i saw one on this forum. although i have downloaded it but it ROM update utility shows pretty strange words on its menu!!! what next
what radio do you currently have
The problem is clearly that you radio ROM is not up to date - and that it why you don't have GPS.
hi buddy! I got it solved!!! Yes it's the problem of the radio, and seems that if your hard SPL version is 1.30, you are not able to flash the radio. everytime it seemed works but after flash the radio just remain the same.
read this thread,http://forum.xda-developers.com/showthread.php?p=1483529#post1483529
there is a radio ROM with hard SPL which flashs the hard SPL first then the radio. I succesfully found the device and got GPS working yesterday!
racerx_ said:
you need to use hard-spl 1.20 olipro to install your radio, 1.30 has resulted in radios not being flashed even though you follow all the steps.. there is a note about this in the guide if you read it carefully.
Click to expand...
Click to collapse
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
racerx_ said:
ummmm... yeah.. isn't that what i just said? does anybody read on this forum?
Click to expand...
Click to collapse
No - reading is out of the question. What you have to do (especially if you are new) is just create a new thread - or if not post the same question in as many threads as you can find that are half relevant.
(This of course is cynical sarcasm. Please - do not do the above. I implore you all to READ - as you will find the answers. Also - when you find an answer to your question - try thanking the person who brought you the answer - instead of pretending that you found something new out)
Probably radio version 1.46.00.11
i flashed using trinity info guide and used radio version 1.46.00.11. but my device information show radio version to be 1.16.00.00 and ROM version 2.0.8.2. should i flash it with another radion "1.46.00.11 GPS" (but RUU shows strange wording on the menu when i launched it but didn't install it cause i wanted a go from u) available on this forum?
my goodness... it says on the bottom of the guide in BRIGHT RED FONT "If you have followed these steps, but your radio has not been upgraded, please install Olipro's Hard-SPL version 1.20 found here using SSPL (do not enter bootloader manually) and try to flash your radio again. After doing so, it is recommended that you flash Hard-SPL 1.30 again."
i've now posted this info in the million noob threads as well... seriously ppl..
Thank You Very Much
RACERX you are the MAN, you really are an expert. Now my GPS device is working but searching for the signals as i am in Pakistan these days. Know of any south asian (pakistan or saudi arabia) maps available.
Besides tomtom, which one is the best GPS navigator? And if possible can u tell me where i can find information regarding using my laptops net connection for my PDA? i am an old user of computers (since 1991) but a newbee in the world of pocket pc, and its because of you that i could change completely my SFR s300+ into an english windows mobile 6. I will donate something for you man. I read many threads carefully but was wondering around untill you pulled me outg of this trouble.
Again THANK YOU VERY MUCH
glad it helped.. i'm not familiar with which map programs support pakistan. I use MapKing for Singapore where i am, and love it ... i don't see a pakistan map, but you can check http://www.mapking.com/en/MK10/MK10_Dowload_Eng.htm#Malaysia Tom Tom seems to be quite popular, but again i don't know what countries it supports. Maybe you could try garmin or something? I know that they at least support thailand and such.
about your net connection, you basically want to use your trinity as a bluetooth modem? I've never done it, actually, but i think there are some threads on it if you search around. sorry i can't be more help. let me know if you get stuck
Thanks Again
I really appreciate for your timely and valuable response.
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
HTCzar said:
I have a MDA from T-Mobile with:
- IPL: 1.01
- SPL: 1.40.Olipro
- OS: WM6 CE 5.2.1933 ; Build 18533.0.7.0
- ROM: Schap's WM6 Pro 4.00 RC 25/09/2007 (FULL MODE)
- Radio: 1.16.00.00
- Protocol version: 32.53.7018.01H
I had a few problems with the No GSM, but now everything seems normal.
What improvements would you advise?
SPL to the latest 2.10 or 2.30?
Radio upgrade?
Is it possible to upgrade the Protocol Version? What does it mean?
Click to expand...
Click to collapse
My personal opinion..do not play with IPL/SPL unless its a die situation...try upgrading radio, i find that some radios are better than others in my device...
Learn how to cook and be a flash junkie...LOL
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Yeah, a better Radio will improve your signal, and also save on battery life. 1.54 is the latest and seems to work well for everyone else i know
Check the hermes wiki links above and you can download it there.
HTCzar said:
Most of the times I feel the GSM reception is too weak.
Improving the radio will make reception better?
Wich do you recommend me to instal?? Hermes 300
Click to expand...
Click to collapse
Who is your provider?
My stock AT&T radio (1.40) worked good, but i prefer to use higher versions just in case...I dont have any problems with the current one that i am using right now (see signature)
Portugal TMN
I´ve seen those Rom´s for audio upgrade and have researched on how to install them, I think I can make it with sucess. However, I want your opinion on upgrading SPL before the audio update please
"need bootloader version 1.04 to upgrade your radio and ?RadioBootloader version 107 or less"
in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
How can I check this?
I´ve update the SPL to the 2.10 Olipro and the Radio to the latest version.
However, I can´t make 3G calls, any ideias? It wasn´t working before the update either.
radio o depends on ur provider a lot.
i use 1.43 for australia. 1.54 is ltest but it sux in australia.
so get feedback from those in a similar region. 1.16 is gonna be stuffed either way, there r much better versions.
i also use htc released rom for phone os.
Well, I´ve installed the latest radio and now I´m back with the NO GSM message.
i wonder ir this is a problem with my installation, with the radio rom files, or with my PDA?
Any help please
it means u screwed it up n didnt follow instructions, and probably didnt read wiki.
get a new radio version, or do it again n reflash it.
ensure u have the right ipl/spl version n u understand the risks n bricking when u r upgrading radios.
i have completely wiped my device n bricked it doing radios. so re flash a rom of choice, reflash radios and alllow lots of hours redoing it all.
suggest u try just reflash a radio that works for ur region. be prepared to lose everything n hope u have backed it up before u starrted.
I didn´t bricked. I bought it bricked.
I´have been trying for the past week to recover it from a brick. I´ve read every tutorial in this forum, and didn´t screw up.
However, I haven´t yet found a Radio Rom that work´s stable in this MDA in Portugal TMN.
I´ve tried 1.16.00, 1.38, 1.40, 1.57 (both). When with 1.16 it worked for 2 days in a row, however after that the no gms appears once in a while.
I use Softbank's X01HT under Hard-SPL1.09, Radio 1.14.
I want to upgrade Radio versin, but flash rom which I've found is for SPL1.11 only.
I think there are two ways to upgrade, one is to find another Rom which can upgrade for SPL1.09.
Second is to up the version of Hard-SPL from 1.09 to 1.11.
But neither I could find, and lost my way.
Please help me the best way to solve my problem.
THX in advance.
Hi everyone,
I've just upgraded my (french) Diamond's HardSPL with the OliNex version found in the topic "Hard-SPL or how I learned to stop worrying and love the MPU". Everything was OK at this time so I booted and HTC "reinstalled" the TF3D interface files.
Everything is still working but when I tried (several times) to upgrade the Radio version to v1.00.25.05, the program stays at 0% for 3 minutes and then gave me the 262 update error. I tried to connect my Diamond to different USB ports but didn't change anything.
So I decided to download the official update from HTC website and install it (witch I did) but this update doesn't work too (same error)
The strory is not so bad because my Diamond is still working but I want to install an unofficial ROM...
PS: sorry for my english and thanks for your help
@tompim
The first post in the radio thread is worth reading carefully:-
http://forum.xda-developers.com/showthread.php?t=407956
I suspect that your problem is that you need one of the unsigned / developer hardspls for standalone radio upgrades and you are using one of the "signed hardspls"
http://forum.xda-developers.com/showthread.php?t=408621
http://forum.xda-developers.com/showthread.php?t=400950
Thank you very much for your explanation (i read the radio thread before strarting ).
In fact I want to install the Diamond Project Rom that need theses (http://forum.xda-developers.com/showthread.php?t=408621) HardSPL version but I don't know what version number choose (I tried with the 1.34 and the same problem appeared
To remove all doubt and be able flash virtually any rom, flash the developer edition unsigned Hard-SPL from http://forum.xda-developers.com/showthread.php?t=400950. It should do the trick for you.
Works like a chrarm thanks!