help with ROM upgrade and problems with SIM - Touch Diamond, MDA Compact IV ROM Development

Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!

micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).

Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...

micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.

Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?

i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work

Related

Downgrade Artemis back to WM5

Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580

downgrade to WM5

hey all I am new here and i will be pretty happy if you guys can help me solve the problem i've got with HTC P3300 (artemis)
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
please help me thnx
Darren.
Did you cid unlock?
What is your SPL?
read this: http://forum.xda-developers.com/showthread.php?t=308242
Cheers
Im pretty sure it is unlocked because I did install the USPl by poof and i did try to install the original files but it still giving me errors ! What can I do we talk about 1 month phone !!! please help me SOS
Why would you want to downgrade to WM5? WM5 was a pain in my arse. so many problems I could have smashed my phone with a hammer (estwing of course) a thousand times. Have you tried to upgrade instead? a new batch of diamond roms is looking like an awsome possibility at the moment. Aside from that, are you using vista or xp?
I get the same problem: after 2% the ROM Updater (at my point this one: "HTC_1.12.405.01_026790_WWE_SHIP") says: 244 Invalid Model ID.
Also, I previous installed USPL (again) via the Artemis_USPL.
I did an update to the "Artemis Touch 4.02 Full with 4 sided cube" ROM before, so if there would be a problem with that?..
For me all the WM6-based ROMs are too slow for an 200Mhz-Phone, e.g. my Phone needs like 10 seconds to load the contacts (no other software is running at the same time..). So its getting a little on my nervs..
I tried to find a WM 2003SE ROM for the Artemis, but there is no such Version.
Any suggestions?!
edit: I am from Germany, so is this "HTC_1.12.405.01_026790_WWE_SHIP" ROM not compatible with a german HTC Artemis?
hm, if i remember correctly this is all about the different bootloader versions...
could it be downgrade (in bootloaders) is not possible..???
we had some of this here:
http://forum.xda-developers.com/showthread.php?t=282195
then again check with the versions here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
maybe this works ( though its french):
http://forum.xda-developers.com/showpost.php?p=1520661&postcount=13
and:you must use uspl before you try another rom, it might have been altered by another rom!!!
but seriously no wm5 is faster then yue extraclean!!! or comparable
greetz
another idea:
take out your sd card when trying to flash,
alternatively try sd-card flashing:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
greetz
thormdac said:
but seriously no wm5 is faster then yue extraclean!!! or comparable
Click to expand...
Click to collapse
how faster is it than a normal wm5 rom? are there any pictures to see how it looks like?
dor515,listen to the guys wm5 sucks,really...and for those 200mhz...try overclocking with batterystatus...you can get 247mhz all the time (which is preferred) and if you want you can set up to 300 (at your own risk)

MDA Compact IV - ROM 1.37.111.3 / Radio 1.00.25.03

Heya,
just tried to install a new ROM to my T-Mobile MDA IV with ROM 1.37.111.3 and Radio 1.00.25.03. I followed the Upgrade Instructions on http://modmydiamond.info. On Step 2 when actually updating my rom, which is supposed to take 10 minutes, a dialog appeared on my mda compact iv stating that an unsecure program tries to start and i have to choose yes or no. I choosed yes. It then only took like 1 minute and the progress bar on my pc stated 100%. I then performed the Soft Reset. Now after some time my Device stated its reinitialising itself... in the end my device didnt change and its back to the Original ROM.
I think it has something to do with my rom being unsigned? But i am really not sure since i am totally new to all of this. I tried reading everything up but the information is really wide spread.
If anyone could help my by posting accurate instructions on what i am supposed to do now to get a new rom working. Would be really great, my device is pretty slow atm.
thanks
I did the same yesterday, and i still got the original T-Mobile Rom.
Is it possible to change the rom????
I thing you have no-unsignet HardSPL.
Hello,
sorry. Do yu habe the orginal Rom vor the MDA compct IV? Ich have change it and i will back to the orginal.
Please Help.
Mecki
I believe you have just installed HARD SPL .., and not actually flashed a rom yet .. could be wrong though
I installed Hard SPL olinex. In GErman : unsiegniert.
I have after this install der V6 Rom from this sites
SORRY ABOUT My ENGLISH

New T Mobile NLD Rom Update

Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
And STILL not available from T-Mobile UK!
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Richard van der horst said:
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
Click to expand...
Click to collapse
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
tismij said:
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
Click to expand...
Click to collapse
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Riel said:
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Click to expand...
Click to collapse
Well,
I've used custom roms all the way from dutty's to leo's... LAst week i've flashed the new t-mobile rom. I must say it is very stable and with a few tweaks it is a very good rom.
I did this flash because always with a custom rom there was something i didn't like or didn't work. The feeling i have from this rom (I'm also on the t-mo network of course) is that this one must be tested with the best settings and the best radio for this network... because i need an stable phone.
bdanen said:
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Click to expand...
Click to collapse
so the Chech ROM also replaced your HardSPL, which you then replaced again with SPL 1.37 ?
(why replace the HardSPL again ?)
I guess I will round up a windows PC and reflash using the the rom update .exe and see if my HardSPL gets replaced.
(I kind of asumed the HardSPL never gets updated with a rom update, hence my confusion)
Shame there isnt a way to update the HardSPL without a windows PC
Should the HardSPL not get replaced by the update I can safely use the 1.37 version from xda ?
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
feestbeest said:
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
Click to expand...
Click to collapse
Did your HardSPL get updated too when you updated your rom ?
If no which HardSPL do you have now (if it is the original that is) ?
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
I made a new rom which will work on DIAMxxxxx (all) diamonds.
It's full 143mb (including SPL and RADIO, so Stock, only diam200 is removed).
IF interested I put online. Made with Olinex nbh thing,
same problem here
Riel said:
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
Click to expand...
Click to collapse
Same for me
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Riel said:
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Click to expand...
Click to collapse
Sounds great. So this includes a stock signed spl?
It is 100% the same rom, and you will not get the Device_id error.
T-mobile service-desk WILL see this is not original T-mobile rom I think because ROM name is not the same (T-mobile instead of 1.93.blabal).
sms problem
Help, I flashed this new t-mobile ROM and now I an't send SMS. They stay in postvak uit. In tried flashing another radio and settings in comm manager. But nothing happends.
Try this, I had the same problem with several other roms.
Thank you very much. I tried it and after a softreset it is possible to send SMS now.
REmoved the rom.
It's really too slow
Sorry to bump this one, but does the t mobile NL rom update the SPL to stock?

Problem whit Arte 100

I need an help i receive this from Netherlands and need to change language in italy so i dowload P3300 Italy 3.13.408.1_02.94.90 Ship R, but first i use USPL and all process go ok, but after when i try to charge this Rom i receive this error 244 ivalid Model ID, why
Tanks for help
ILP 1.12.0001
Spl 1.11.cmon
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Are you using Vista? If yes, then try downloading in a computer with Windows XP?
gsmsupport said:
Yes i solve problem, finally i manage using Spaghetti Rom and all Rom utilty for USpl this baby, if someone have same my problem tell me i post complete rom whit uspl.
Click to expand...
Click to collapse
yeh,i have same problem.did spl as well but dose not update rom and tells invalid.whats to do plz help.
ipl 1.14.0001
spl 1.11.0000
os 1.14.0.0
Please, don't revive threads from over a year old. As I appreciate you using the search function, if you find a thread which is over a year old, best thing to do is create a new thread.
Also, this thread is related to upgrading your Artemis, so it doesn't really fit in ROM Development. Closing the thread.

Categories

Resources