MDA Compact IV - ROM 1.37.111.3 / Radio 1.00.25.03 - Touch Diamond, MDA Compact IV ROM Development

Heya,
just tried to install a new ROM to my T-Mobile MDA IV with ROM 1.37.111.3 and Radio 1.00.25.03. I followed the Upgrade Instructions on http://modmydiamond.info. On Step 2 when actually updating my rom, which is supposed to take 10 minutes, a dialog appeared on my mda compact iv stating that an unsecure program tries to start and i have to choose yes or no. I choosed yes. It then only took like 1 minute and the progress bar on my pc stated 100%. I then performed the Soft Reset. Now after some time my Device stated its reinitialising itself... in the end my device didnt change and its back to the Original ROM.
I think it has something to do with my rom being unsigned? But i am really not sure since i am totally new to all of this. I tried reading everything up but the information is really wide spread.
If anyone could help my by posting accurate instructions on what i am supposed to do now to get a new rom working. Would be really great, my device is pretty slow atm.
thanks

I did the same yesterday, and i still got the original T-Mobile Rom.
Is it possible to change the rom????

I thing you have no-unsignet HardSPL.

Hello,
sorry. Do yu habe the orginal Rom vor the MDA compct IV? Ich have change it and i will back to the orginal.
Please Help.
Mecki

I believe you have just installed HARD SPL .., and not actually flashed a rom yet .. could be wrong though

I installed Hard SPL olinex. In GErman : unsiegniert.
I have after this install der V6 Rom from this sites
SORRY ABOUT My ENGLISH

Related

Dutch MDA pro does not boot with none T-Mobile ROM

Hi,
I am trying to flash my dutch T-Mobile MDA-pro with a none T-Mobile ROM. I am using the tool MaUpgradeUt_noID.exe to do the flash. The flashing goes fine, but the device does not boot and is stuck in boot loader mode.
If I then only flash the CE partt of the original T-Mobile ROM, then the device boots again, with radio and ext. ROM from previous attempt.
What am I doiing wrong?
I understand that there is no CID unlocker for universal and I have to use MaUpgradeUt_noID.exe. Is that correct? Is MaUpgradeUt_noID.exe.also for universal, I don't see the universal picture in that tool..
I used ROM: UNI_QTEK_13077_176_10900_WWE_Ship.exe, I also tried a jasjar ROM that another dutch T-Mobile user successfull installed.
Any tips?
Ronald
Only thing I know is that I can flash any rom 2 my dutch t-mobile mda pro.
When you run it the first time, it goes into the bootloader.
Then you must run it a second time to start.
worked 4 me
While beiing in bootloader I tried serveral ROM's they all failed to boot. The only ROM I can boot is the original T-Mobile ROM.
Do you flash with MaUpgradeUt_noID.exe? or another flash tool?
Ronald
Same here I am able to flash my MDA Pro with anything I want, and I did it about 10 time already.
Maybe they are now selling devices with something protecting from flasing the ROM with a different then from T-Mobiel ?
I have tried it once again and followed these instructions and now it worked (I only updated CE):
http://forum.xda-developers.com/viewtopic.php?t=45874&highlight=maupgradeutnoid
The difference between wat I did and these instructions is: The editting of ruu.conf. The universal does NOT need the line [CHECKCEID_TYPE]=1
Ronald
search voor the update rom WITHOUT _NoID.exe tool.
i have updated my dutch mda pro first time with changing provider id and that worked fine. yesterday i updated with the noID.exe and resulted in a crash in bootmenu. after that i change the provider id and i worked well.
damm slecht engels, kort gezegd.
gebruik HTC64_Extended_ROM_Tool om provider id aan te passen in de nfb bestanden. bij mij werkt het op deze manier prima.
My previous posting was not clear, I am now running with a none T-Mobile ROM. I changed my previous posting.
Ronald

Downgrade Artemis back to WM5

Hello to all
i've tried different WM6 Roms but i'm noct convinced to use it yet.
That's why i'm trying to find a way to downgrade to WM5.
I know that there are several how-tos but none worked yet.
I already tried the opposite way via uspl to downgrade. no success yet.
WM5 Rom is here, when trying to downgrade i get the error message 260 which means no connection to the device. i'm using the same machine for downgrading as for upgrading, nothing but the Rom on the phone has changed.
Currently i'm using the o2-xda-orbit german rom.
If anybody has a clue what to do to get the old stuff back, thx in advance
blue
You can downgrade your O2 Orbit successfully if you have Original German ROM (WM5) which is available somewhere in this forum. I can't remember which thread but if you do some search I am sure that you will find it.
I have just found Original German O2 Orbit ROM here : ftp://xda:[email protected]/Uploads/Upload/Official XDA Orbit ROM
Thank you for your answers!
I own a HTC P3300 Artemis.
Using USPL and the original o2 german wm6 rom i flashed it with WM6.
I already downloaded a german wm5 rom, my problem right now is that i cannot by any unknown circumstances get this rom on my phone.
No matter whether i use uspl before trying to flash the original rom or if i don't use uspl the result remains the same.
The update utility keeps telling me that it is not possible to connect to my smartphone.
Active Sync/ Mobile devices center connection is working fine though.
Greets blue
You can try with this Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112/HTC_1.12.405.01_026790_WWE_SHIP.rar
Let us know if this help you.
Thy to all, i made it!
Main problem seemed to be my os!
even though i already flashed using vista as os this time it didn't work out.
I used my other computer running xp and it worked on the first run!
greets blue
... hear that
i recognize that problem... even though i always sync with my laptop (Vista) i use another com (XP) to flash..
Don´t know why but it seems alot have experienced this prob.
I have bought a htc3300 from a dealer that i find at skroutz but after 1 day i had lost the 2nd language keyboard so i took it back to the dealer to fix the problem he said that wm6 is free to upgrade so let passed it but he put the touch htc software that don't work good how can i downgrade to wm5 again please help it's only 2 days mobile !!!!
well after many pockets of tobaccos i fix it with the Original HTC Artemis WM5 ROM here : http://rapidshare.com/files/19322112...0_WWE_SHIP.rar thanxs very much it finds the image version of htc touch and make a downgrade that was that the upsl cannot do ,the upls reload the same version that had before maybe because it didn't know the previus
Humm??
The UPLS is not a ROM??
When you run UPLS it sets the CID registration, so you can flash any ROM you want - but offcouse you still have to get the ROM
you 're right after upsl you can downgrade or upgrade... many tnx for info...
HTC P3300
can´t dowgrade wm6 to wm5 after 2 percent it return with a error
ERROR [244] : INVALID MODEL ID
rom image HTC_1.12.405.01_026790_WWE_SHIP.rar
help
++++++++++help++++++++++
For French User, i'd Upload an Official Operator Orange Version here :
ftp://xda:[email protected], Original ROM Fr) pour M650_0407.rar
Direct Download here :
http://www.mobilite.fr.orange-business.com/public/oev4/html/fr/pme/mobiles/ba/dl.php?mi=164&pi=2580

help with ROM upgrade and problems with SIM

Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.
Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?
i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work

New T Mobile NLD Rom Update

Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
And STILL not available from T-Mobile UK!
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Richard van der horst said:
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
Click to expand...
Click to collapse
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
tismij said:
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
Click to expand...
Click to collapse
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Riel said:
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Click to expand...
Click to collapse
Well,
I've used custom roms all the way from dutty's to leo's... LAst week i've flashed the new t-mobile rom. I must say it is very stable and with a few tweaks it is a very good rom.
I did this flash because always with a custom rom there was something i didn't like or didn't work. The feeling i have from this rom (I'm also on the t-mo network of course) is that this one must be tested with the best settings and the best radio for this network... because i need an stable phone.
bdanen said:
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Click to expand...
Click to collapse
so the Chech ROM also replaced your HardSPL, which you then replaced again with SPL 1.37 ?
(why replace the HardSPL again ?)
I guess I will round up a windows PC and reflash using the the rom update .exe and see if my HardSPL gets replaced.
(I kind of asumed the HardSPL never gets updated with a rom update, hence my confusion)
Shame there isnt a way to update the HardSPL without a windows PC
Should the HardSPL not get replaced by the update I can safely use the 1.37 version from xda ?
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
feestbeest said:
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
Click to expand...
Click to collapse
Did your HardSPL get updated too when you updated your rom ?
If no which HardSPL do you have now (if it is the original that is) ?
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
I made a new rom which will work on DIAMxxxxx (all) diamonds.
It's full 143mb (including SPL and RADIO, so Stock, only diam200 is removed).
IF interested I put online. Made with Olinex nbh thing,
same problem here
Riel said:
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
Click to expand...
Click to collapse
Same for me
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Riel said:
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Click to expand...
Click to collapse
Sounds great. So this includes a stock signed spl?
It is 100% the same rom, and you will not get the Device_id error.
T-mobile service-desk WILL see this is not original T-mobile rom I think because ROM name is not the same (T-mobile instead of 1.93.blabal).
sms problem
Help, I flashed this new t-mobile ROM and now I an't send SMS. They stay in postvak uit. In tried flashing another radio and settings in comm manager. But nothing happends.
Try this, I had the same problem with several other roms.
Thank you very much. I tried it and after a softreset it is possible to send SMS now.
REmoved the rom.
It's really too slow
Sorry to bump this one, but does the t mobile NL rom update the SPL to stock?

New version on my p3300. help!

Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Dragon-Fly said:
Hi,
I have used mij HTC P3300 for about 1,5 years. It has worked fine in the past, but this week my phone is a bit sick. It shuts down after a while, my screen fades out and i need to soft reset my phone in order to cal or text again. I thougt a update may solve the problem, but im a bit confused.
On XDA many updates are availeble, such as Rom Back&Blue V ? and more. I like the screenshots from tom_codon and his ROM's (Rom Back&Blue) but i don't know how to put them on my phone. so i need some help with the following problems:
What is the newest version i can use for my P3300?
Do i need to flash my phone first?
If Yes, how do i flash my phone?
Do i need more steps before i do anything?
On my info screen says the following:
ROM versie: 3.13.404.1 NLD
ROM Datum: 8/28/07
Radioversie: 02.94.90
Protocolversie: 4.1.13.44
ExtROM versie 3.13.404.102
My phone has no simlock, and has all the original software on it.
I know im just another Noob hitting the fXDA form, but i hope you can help me with a guide: Installing a new version op your p3300 for dummies.
Thx!
Click to expand...
Click to collapse
Ok....you have a big problem..
I've read that if you have a fading screen,you might have your motherboard faulty.
So grab a phone and run to HTC repair center while you still have warranty.
cheers....
Z
Hmm, but all other fuctions on my phone are working correct. I may have given the inpression that is happens all the time but it ain't. Sometimes such as after a call, my screen turns black and if i hit the reset button the screen lights up an than it fades out. That made me believe that is is a software problem, so a newer version of WM may be a solution, or not?
Thanks but, does someone has an idea, or anser to my questions?
It seems hardware related, though if u want to flash another rom, u can check the USPL thread on Artemis upgrading section, then flash the rom u want.
Good luck.

Categories

Resources