Related
Out today to download from here:
http://www.business.orange.co.uk/se...c=PaDPage&cid=1044130840493&mid=1044129390154
Discuss in the relevant forum here:
http://forum.xda-developers.com/viewtopic.php?p=249806
hi
whats up with the radio rom version on this update???
1.03??? thats so 2005!!!
Hi, i have an Orange M5000,
my ROM is:
ROM: 1.13.49 WWE
ROM Date: 09/20/05
Radio version: 1.03.00
Protocol version: 42.36.P8
ExtROM version: 1.13.130 WWE
do you think its worth me installing this upgrade, is the only thing it changes is the ability to use push E-mail?, whats the best radio version to have?
thanks for your help
Hi I did the update a few hours ago and I'm loving it, the only thing I don't realy like is the fact that the battery icon has moved2task bar, but its all working,plus there is no silent pause everytime I pick up a call
I have found one problem, it could just be me but im not sure what else i can do, but i cant install SPB PocketPlus 3, im lost with out this software, i think its the most usful program i have
spv-m5000
radio version i have on spv-m5000 is 1.09
if any one wants it ill send them
its to process :
1 fromn 1.03 to 1.06
then 1.06 to 1.09
about 70 mb.
rgds
Re: spv-m5000
motin said:
1 fromn 1.03 to 1.06
then 1.06 to 1.09
Click to expand...
Click to collapse
Why would you need both?! you can go straight from 1.03 to 1.09!
and it's on the ftp...
radio upgrade
gd luck if u can do it
on my spv-m5000
i could not do it and hed to do 1 by one.
Hi, lastnight i upgraded my radio from .03 to .09 and it worked perfectly, as normal i had to make sure the phone was in bootloader mode to make t work, i got the files from this sites FTP server, XDA-Developers site is all you need!
Thank you to everybody that gives there views and advice freely!
P.S i got Pocket plus to install after i did another hard reset, phewwww
Don't want to sound stupid but ...
.. is upgrading your ROM an easy thing to do for a non teckie ?
Do you need to hard reset etc etc. ?
Is there a guide out there ?
Don't wanna take the plunge and mess things up. I've got loads of software and tweaks on my SPVM5000 - will Sprite Back up re-install with a new ROM. I'm also on 1.13.49 same as jab1a.
Hello All,
If i replace my xda exec rom to orange rom, it will be locked?
Another question, where can i get the radio rom 1.09 to flash the orange rom?
Thank you,
racerx
Hi Rick GM,
the ROM upgrade is pritty easy and the Radio update is aswell, everything you need to know or might not need to know about the update is in the WiKi and forum. its real easy.
As for backups, im not sure how this works but for good measure before i did the upgrade i did a FULL backup, then i did a non-rom backup (i.e i just backed-up the things i had installed on the m5000) then i did a PIM and message backup (note: i only ever have problems with a restore when i decide to restore the messages databases so unless you realy need to i would only backup the PIM(contacts) database). I think if you tryed to do a full backup and then do the upgrade and then restore the full backup you might run into a few errors or incompatability. it only takes about 30mins to do the update and about another 20mins to re-install all your software and then the rest of your life to get all the setting you want just right! lol
I am sure you will do fine, after all this is the best site in the world for PPC so im sure someone here would be able to help you if it all goes pear shaped
Moved thread from news section
Thanks for that jab 1a
I haven't taken the plunge yet but it's coming !
I think your 20 minutes to re-instal software is a bit optimistic even if all goes well. I reckon it will take me an hour plus to sort out all the cr*p that I've got on my device. (I keep a copy of everything but some's on my home PC and some at work).
I'll update you when I finally pluck up courage / find the time.
BTW - I'm only going to do it because you can. Isn't that what these devices are all about ?
Rick GM said:
BTW - I'm only going to do it because you can. Isn't that what these devices are all about ?
Click to expand...
Click to collapse
Ahh thats the spirit!
yep looking at it now i think it would take more than 20mins
let us know how you get on when you do it
jab1a wote
let us know how you get on when you do it
Click to expand...
Click to collapse
Well I upgraded with the ROM from the Orange site (1.30.90) - no problem. That's good news.
Sprite Backup V5.1 is newly released this week and boasts cross ROM/Device backup capability after capturing your old ROM in .sbu file immediately after hard reset and prior to ROM upgrade.
It hasn't worked - it won't recognise my .sbu file (Invalid Upgrade File) or words to that effect so it looks like a slog to put everything back on (unless Sprite can restore (no pun intended) my faith in them and come up with an answer. Might have a go at the Radio Rom next.
I have the new ROM from Qtek into my Universal. Is it worth the upgrade to this new Orange ROM?
best regards,
Deiota
Rick GM said:
jab1a wote
let us know how you get on when you do it
Click to expand...
Click to collapse
Well I upgraded with the ROM from the Orange site (1.30.90) - no problem. That's good news.
Sprite Backup V5.1 is newly released this week and boasts cross ROM/Device backup capability after capturing your old ROM in .sbu file immediately after hard reset and prior to ROM upgrade.
It hasn't worked - it won't recognise my .sbu file (Invalid Upgrade File) or words to that effect so it looks like a slog to put everything back on (unless Sprite can restore (no pun intended) my faith in them and come up with an answer. Might have a go at the Radio Rom next.
Click to expand...
Click to collapse
Sprite really screwed up here.
When they released 5.1, they re-introduced their killer rom upgrade proof restore feature. It even works for the new self-extracting restores. How cool is that?
Now, today, I had to have my SPV M5000 replaced (same model) because of a screen problem, and knew the replacement would be AKU2, so I purchased Sprite 5.1 to back up with. I looked around all the different pages I could find showing how to use Device Upgrade Mode. All had links to the same GetUpgradeData.exe. So, even though I had that nagging developers' intuition that this must be wrong, I assumed it was the right version. I only had twelve hours to puchase, get the file down, and do all the backup stuff.
Then I exchanged devices with the courier. (Orange care is great (mostly!)). However, when I tried to restore, what a surprise: "Invalid Upgrade File". Checked back on Sprite Site - ONE page out of the five or six links to GetUpgradeData2005.exe. Howl !!!! :x
Can someone please post an UpgradeData.sbu, from a clean vanilla Pre-AKU2 M5000, dumped with the new GetUpgradeData2005.exe, otherwise someone at Sprite is just gonna have to die. Lots.
Many, Many thank yous in advance!
Update: Sprite have kindly offerred to provide an sbu for 1.13.53 WWE.
Unfortunately, as best as I can remember, mine Rom was 1.13.49 WWE.
Can anyone please tell me of an identifying characterstic by which I dould have distinguished the two versions (bearing in mind - I don't have the device any more), or even better an upgrade file (sbu) for 1.13.49 WWE?
Mutant
I too used the GetUpgradeData.exe as advised by Sprite. After registering my problem they advised me to use the GetUpgradeData2005.exe and sent me a copy. Unfortunately I'd already upgraded the ROM so didn't have the .sbu pre upgrade. I've since got a clean 1.13.49 from a colleagues Orange SPV M5000 but the backup still didn't work. Sprite recognised the .sbu but just messed up the device (after partially restoring) requiring several hard resets. If you want the .sbu, I think I've got it stored somewhere. Let me know.
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
the same
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
kosiara said:
I have the same problem, but I have a FULL version of 4.02 ROM (ENG). The problem is exactly the same - after some time (one night for example) the "phone application" stops responding when I want to make a call. I think it's the ROMs fault. I thinking of going back to the original WM5 or original WM6 from HTC.
Click to expand...
Click to collapse
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Same problem here
Zecanilis said:
I think the problem is from the OS ROM. I had same problem with vanilla 4.02.
Just try it another new build ROM.
Cheers
Click to expand...
Click to collapse
Hi Zecanilis,
I encounter the same problem that is described here by user kosiara an Novy
The GSM signal is excellent, but the phone does not work from time to time and when I try to make a call, I get the message "the operation failed". of course nobody can reach me neither... When I do a soft reset everything is back to normal...
This is very anoying and I do not know what to do.
I bought this PDA second hand, with the upgrades already done for me. Since I do not have any personal data or programs on it yet, I wouldn't mind doing a hard reset and installing everything from scratch.
What would you suggest as a stable system OS and ROM versions?
Any help would be much appreciated.
Here are my actual data:
XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.13.0.0
ROM version : Artemis Touch 4.02 WWE
ROM date 4/08/08
Protocol version 4.1.13.52
Model Nr : ARTE 200
WM 6.1 Professional
CE OS 5.2.19199 (Build 19199.1.0.0)
Regards
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Zbootsom said:
But, yet again, I don't understand...
Vanilla 4.01 and 4.02 seem to be very popular and appreciated roms.
How come we are the only ones to complain about phone not working properly?
Is it really the OS build? CE OS 5.2.19199 (Build 19199.1.0.0) I don't think so. I have seen it also a lot in Devices.
What could it be then?
I hope it is not a Gsm radio hardware pb......
Any suggestions?
Thanks
Click to expand...
Click to collapse
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Zecanilis said:
I'm not "guessing". I had the same problem and i think my problem is solved after this new rom i have.
Just try one recent build of OS. My build is 19591.
Before upgrading, just turning off and on the phone in the "comm manager" whould give me that problem sometimes. Now i've allready tested it and all is ok.
Cheers
Click to expand...
Click to collapse
Hi, and thanks for your reply.
I am new to this and althought I read many post, I am not sure.
Can I just upgrade the OS Build without flashing a new ROM.?
If Yes, How do I do it...any tutorial?
Thanks
No.
You have to flash a complete new ROM.
Cheers
OK Thanks
Whish me good luck,,,
Good luck and good choose...
!Novy said:
Hi Everybody!I have SPV M650 Orange(Artemis).I update my ROM to Artemis Touch 4.01 Vanilla and now i have problem with calling.After night i try to call but... my phone not respond,others programs and function working normally.Restart(big battery drain 10% down after soft reset !!) and my Artemis working fine.Before im using Artemis 4.01 Vanilla ROM and problem will be the same!I update my radio to 03.08.90 but problem stay.Please help lads!
Sorry,bad english.
Regards.
Click to expand...
Click to collapse
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
novy said:
I experienced that problem a few weeks ago and it's happening more often in the last days. My ROM is Artemis Touch 4.02 full.
Some people started complaining that they couldn't phone me while I didn't see any problem with my phone (as long as I didn't try to make a call myself).
Funny addition to that problem: Sometimes I find my phone (usually in the morning) with a blank white screen. I don't know why that keeps happening but I sure would appreciate any hints what's the root of all that evil.
I'm happy with the 4.02 ROM so I'd rather avoid some things if it keeps the ROM stable.
Click to expand...
Click to collapse
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
neilhhardy said:
when you installed your new rom did you flash it twice ?
this will make sure that all system files are copied 100%.
its really important to do this on all new roms that you install.
Click to expand...
Click to collapse
Thanks for your answer. Yes, I flashed it twice and I even flashed a factory rom before that. All Artemis Touch roms were fine until 4.01 and 4.02.
So Zecanilis is probably right blaming the OS version for that malfunctions.
New Rom
I have flashed my device using USPL (took me 2 days to setup the program to work with vista drivers). Then I flashed the same ROM I had before (Artemis Touch 4.02 full Red and Black) but with a different OS build. (as Zicanillis advised)
I will use it for a while and let you know if the freezing phone problem has been corrected.
Cheers
One other change that is on my build is page pool.
My page pool is 6 MB, and some Touch and vanilla (included the 4.02 i had) is only 4MB.
In my opinion that could be another issue to test.
My PDA is working just fine now.
Cheers
For me the problem was the OS Build.
I flashed my device with the same 4.02 vanilla but with a different OS buid and the Phoneworks great. Been using for 2 weeks now, never freezes or looses signal.
Cool
Thanks to Zecanillis advice! obrigado !
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
micke99 said:
Hi i have a Diamond that i bought in Russia and now i want it in Swedish.
So i downloaded a swedish ROM: DIAM1.37.413.3SVE
And i have the Unsign-Hard-SPL-Diamond-Oilnex 1.40
So when i have installed the SPL, And the Swedish ROM, Everythings OK, Runs like normall BUT when i put a SIM Card inside the Diamond it wont work, Cant call, The Touch screen will not work right, Its freezing and booting the device... Why? Do i need some "Radio" or whats it called?
Im very new about this som please help me and explain good-easy how to do step by step
When i start the Diamond it says;
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
If that says anything?
Hope for some expert help. Best regards. Micke!
Click to expand...
Click to collapse
Hi i'm not an expert, but it's not right that when you start the Diamond it says "1.37.00.00" when in fact you have installed ROM "1.37.413.3SVE".
I would suggest try flashing the hard SPL again, then flash the new ROM again. (and use with the signed version of Hard SPL this time for safety against bricking).
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
micke99 said:
Now i tryed the Signed 1.30 Oilnex SPL. And then flashed again with the Swedish ROM.
When i flashed with the Swedish ROM it says that i have 1.30 Oilnex in the display.
But when i start the diamond it still says 1.37.00.00 is that right?
Still it wont work with SIM inside...
Click to expand...
Click to collapse
That is not really a problem. On my phone, which works perfectly well, I also only see the major number release (i.e. 1.37.00.00). I don't think that's a symptom of why your phone is not working. You should try to find the cause elsewhere, but I also do not know where you should start.
Yes because the phone is working with russian ROM, But not when i install the Swedish... hmm...
Any clues=?
i can help you - flash this:
http://rapidshare.com/files/129598071/Diamond_Radio_1.00.25.05.rar
and your swedish rom will work
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
kenshiromasters said:
Hi all,
I have an big probleme with my HTC diamond !
if i flash my BASE rom firmware my HTC reboot with the same message :
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
* my version is MicroP-Diam (LED) v11*
if you have rom version for update it thanks or over solution !
I have allways make : Hard reboot and soft reboot , changing firmware ect ......
Click to expand...
Click to collapse
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
duttythroy said:
I'm not sure what ur saying, but if you flashing a htc stock rom its possible cant update because of region specific, if you havent have hardspl installed try and flash again,
Click to expand...
Click to collapse
Mine is also MicroP-Diam (LED) v11 and flashing is no problem for me. Try using Hard-SPL like Dutty suggests ...
I have exactly the same problem.
Even while updating the screen is black.
kenshiromasters, did you fix the problem?
Thanks,
Is there a solution for this problem yet?
Mine started doing the same thing today.
MicropERROR
Microp Version Mismatch 0
Please update Latest Microp Firmware
EDIT: Installed hard SPL and it didnt fix it
The same problem
Me too!
Some time, the screen in black, only can hear the music-volumen up/down.
I try battery off/on severy times to get a typical error:
MicropERROR
Microp Version Mismatch 0
Please update latest Microp firmware
Hi there,
unfortunately I'm facing the same problem.
the screen effectively is black, but I can see homepage etc as it's in standby.
MAYBE, but it's only in my mind, we could fix the problem installing windows mobile 6.1 professional.
But the problem is: who has wm 6.1 professional?anyone can post the link for download?
his this been fixed? i am having the same problem!
trying to reload duttys v3.4 right now...
and yes, im using hard spl dev ed
update:
just reflashed to dutty's 3.4, still the same problem.
seems like the phone is working because it will make the power on noise when i turn it on, but the screen isn't showing anythign again.
great...nice brick i have on my hands here :|
Got the same problem after flashing Dutty´s 3.4 - after first restart display was only "very dark" that I even could read it - "microp version mismatch 0 - update microp firmware", after second reboot the display is off permanently I flashed originila stock ROM and then signed SPL but the problem is still same... Really don´t know what to do now. How to upgrade "micorp firmware"???
edited: How did You all guys have fix that?? Is there any way instead of send it for warranty repair?? Here in Czech I´m worryin about the time of repair - and guess it will take probably one month n I can´t miss my phone for so long time:-((((
So please does anbybody know if it is SW or HW problem?? If it could be solved without repair by authorized service???
Problem hasn't got anything to do with coocked roms, hardspl or whatever....I had the problem too and had original 1.37 and 1.93 stock rom on my Diamond (Dutch). Had it send to HTC's repair lab in Belgium (www.eurotwice.be) but they couldn't repair it. Got a new one because of extenden/extra warrenty I bought when I bought my phone and cellurar subscripton with my telco.....
sounds like the hermes whitescreen problems that have been solved..
my 0,02
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
keerttttt said:
Allright, i guess we have to find a connection between these problems. Other then that their all Touch Diamonds of course...
Anyhow, if everyone with this problem can fill in the following:
- Do you use a HardSPL / Custom ROM?
- Have you ever flashed your device?
- Is your diamond of a special brand? (like T-mobile or Sprint)
- When did you purchase your phone?
Maybe we can find somekind of link...
Click to expand...
Click to collapse
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
tommm said:
I used HardSPL 1.40 Olinex, Dutty´s 3.4 ROM, my device flashed manytimes without any problems, Diamond is not branded a I purchased it here in Czech in e-shop (English version).
Click to expand...
Click to collapse
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
keerttttt said:
OK, so:
- Do you use a HardSPL / Custom ROM?
Yes, HardSPL 1.40 Olinex, Dutty´s 3.4 ROM
- Have you ever flashed your device?
Yes, see 1
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
???
And, for the record... You do have the microP problem right?
Click to expand...
Click to collapse
Yep my Diamond is dead
Not "fully dead" - is detected by PC so I flashed back stock SPL and ROM - both 1.93
It seems that PDA is working, but nor display neither buttons light
Ok today I sent it to warranty service n will see...I only hope that when i was flashing back stock ROM n stock SPL without display it was succesfull
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Leeroy_ said:
I have the same problem.
so:
- Do you use a HardSPL / Custom ROM?
I use the original HTC ROM
- Have you ever flashed your device?
No
- Is your diamond of a special brand? (like T-mobile or Sprint)
No
- When did you purchase your phone?
?
Click to expand...
Click to collapse
send it back under warranty then
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
And STILL not available from T-Mobile UK!
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Richard van der horst said:
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
Click to expand...
Click to collapse
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
tismij said:
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
Click to expand...
Click to collapse
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Riel said:
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Click to expand...
Click to collapse
Well,
I've used custom roms all the way from dutty's to leo's... LAst week i've flashed the new t-mobile rom. I must say it is very stable and with a few tweaks it is a very good rom.
I did this flash because always with a custom rom there was something i didn't like or didn't work. The feeling i have from this rom (I'm also on the t-mo network of course) is that this one must be tested with the best settings and the best radio for this network... because i need an stable phone.
bdanen said:
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Click to expand...
Click to collapse
so the Chech ROM also replaced your HardSPL, which you then replaced again with SPL 1.37 ?
(why replace the HardSPL again ?)
I guess I will round up a windows PC and reflash using the the rom update .exe and see if my HardSPL gets replaced.
(I kind of asumed the HardSPL never gets updated with a rom update, hence my confusion)
Shame there isnt a way to update the HardSPL without a windows PC
Should the HardSPL not get replaced by the update I can safely use the 1.37 version from xda ?
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
feestbeest said:
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
Click to expand...
Click to collapse
Did your HardSPL get updated too when you updated your rom ?
If no which HardSPL do you have now (if it is the original that is) ?
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
I made a new rom which will work on DIAMxxxxx (all) diamonds.
It's full 143mb (including SPL and RADIO, so Stock, only diam200 is removed).
IF interested I put online. Made with Olinex nbh thing,
same problem here
Riel said:
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
Click to expand...
Click to collapse
Same for me
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Riel said:
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Click to expand...
Click to collapse
Sounds great. So this includes a stock signed spl?
It is 100% the same rom, and you will not get the Device_id error.
T-mobile service-desk WILL see this is not original T-mobile rom I think because ROM name is not the same (T-mobile instead of 1.93.blabal).
sms problem
Help, I flashed this new t-mobile ROM and now I an't send SMS. They stay in postvak uit. In tried flashing another radio and settings in comm manager. But nothing happends.
Try this, I had the same problem with several other roms.
Thank you very much. I tried it and after a softreset it is possible to send SMS now.
REmoved the rom.
It's really too slow
Sorry to bump this one, but does the t mobile NL rom update the SPL to stock?