Hi,
I am trying to flash my dutch T-Mobile MDA-pro with a none T-Mobile ROM. I am using the tool MaUpgradeUt_noID.exe to do the flash. The flashing goes fine, but the device does not boot and is stuck in boot loader mode.
If I then only flash the CE partt of the original T-Mobile ROM, then the device boots again, with radio and ext. ROM from previous attempt.
What am I doiing wrong?
I understand that there is no CID unlocker for universal and I have to use MaUpgradeUt_noID.exe. Is that correct? Is MaUpgradeUt_noID.exe.also for universal, I don't see the universal picture in that tool..
I used ROM: UNI_QTEK_13077_176_10900_WWE_Ship.exe, I also tried a jasjar ROM that another dutch T-Mobile user successfull installed.
Any tips?
Ronald
Only thing I know is that I can flash any rom 2 my dutch t-mobile mda pro.
When you run it the first time, it goes into the bootloader.
Then you must run it a second time to start.
worked 4 me
While beiing in bootloader I tried serveral ROM's they all failed to boot. The only ROM I can boot is the original T-Mobile ROM.
Do you flash with MaUpgradeUt_noID.exe? or another flash tool?
Ronald
Same here I am able to flash my MDA Pro with anything I want, and I did it about 10 time already.
Maybe they are now selling devices with something protecting from flasing the ROM with a different then from T-Mobiel ?
I have tried it once again and followed these instructions and now it worked (I only updated CE):
http://forum.xda-developers.com/viewtopic.php?t=45874&highlight=maupgradeutnoid
The difference between wat I did and these instructions is: The editting of ruu.conf. The universal does NOT need the line [CHECKCEID_TYPE]=1
Ronald
search voor the update rom WITHOUT _NoID.exe tool.
i have updated my dutch mda pro first time with changing provider id and that worked fine. yesterday i updated with the noID.exe and resulted in a crash in bootmenu. after that i change the provider id and i worked well.
damm slecht engels, kort gezegd.
gebruik HTC64_Extended_ROM_Tool om provider id aan te passen in de nfb bestanden. bij mij werkt het op deze manier prima.
My previous posting was not clear, I am now running with a none T-Mobile ROM. I changed my previous posting.
Ronald
Related
I tried to upgrade my dutch mda pro to the new qtek 9000 rom after I had upgraded to the new english t-mobile mda pro rom.
He wil start i an calibrate and al that and then you get the customisation and after that reset and he starts again and you must calibrate again enzo....
But after two or three times you get the message DEVICELOCK
you have got this rom illegally
what do I do??? More important how do I get my mda pro working again with t-mobile rom??
And yes I did follow the instructions on upgrading using the bootloader principle.....
Any news on this problem? I haven't tried the update, yet, but would of course hate it to get this error...
Yes, you have downloaded the wrong ROM. with that lock in it.
Try another one.
vondutch said:
Yes, you have downloaded the wrong ROM. with that lock in it.
Try another one.
Click to expand...
Click to collapse
Which one?
Any other will do. Just try it.
I think this one is the best because it the first and only one that support AKU2 and A2DP:
ftp://xda:[email protected]/UNI_QTEK_13077_176_10900_WWE_Ship.exe
I do not think the roms on xda-developers ftp site are locked.
Maybe the device itself is locked.
Did dadio22 flash with this UNI_QTEK_13077_176_10900_WWE_Ship.exe rom?
This rom is not locked.
bambacik said:
I do not think the roms on xda-developers ftp site are locked.
Maybe the device itself is locked.
Did dadio22 flash with this UNI_QTEK_13077_176_10900_WWE_Ship.exe rom?
This rom is not locked.
Click to expand...
Click to collapse
I had one rom on the xda ftp server that had this devicelock.
Ehm it has simlock on it still but I used the new qtek rom(UNI_QTEK_WWE_13077_130176_10900_WWE_Ship) that was available on xda but I got it to work changed the provider to t-mobile and updated it again and it works again. But I don't think it works alright have got a few errors which I didn't have with the new t-mobile uk update.
Does anybody know what causes this because if it happens a lot more I think I want that t-mobile rom back. Is that possible because I think it would be a downgrade.....
wel to be honest, its a newproblem , ive never heard about ti before, as far as i know, u should ve had the Country ID error, rom locks and stuff, are to be detected through the uploader utility, but after you install it sucessfully on the system u get such an error, ik durf niet te zeggen dat ik iets over dit problem ooit heb gehoord
help
I have got the same problem. After the install from 02 rom to the qtek i get a message saying that i have illegally acquired the rom and device is locked.
neptune said:
I have got the same problem. After the install from 02 rom to the qtek i get a message saying that i have illegally acquired the rom and device is locked.
Click to expand...
Click to collapse
wow! this is the first time i've read about a device that's got locked due to an upgrade. i don't have a qtek (it's from the stingy '3' right?? ) but i've flashed several UK's m5000 and one S'pore's Dopod using every available Rom, including qtek's (just to see the differences) with no probs except countryID error on dopod. which i solved by unlocking it with Buzz's Uni_unlock program to make Super CID unlock (even tho' it is a factory sim and network unlock device but just from another region/country).
As thereis only one latest rom release that i know of (from Orange), i am sure all the roms available here and at buzzdev.net has no device lock. i guess the problem could lie with your bootloader version. if it's not BL 1.00 or 1.01 why not change it to these first bfor flashing other roms.
other than that it must be hardware related which is unlikely as the device is made by htc and only renamed qtek, and for qtek to change or tinker with it could infringe on htc's copyright.
It was only the qtek rom i had trouble with. No need for that now since the new AKU 3 rom came out. Worked Great
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!
Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)
A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.
Is this the SEA or ANZ version?
Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.
grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.
claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...
I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.
Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?
Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.
I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.
Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.
Heya,
just tried to install a new ROM to my T-Mobile MDA IV with ROM 1.37.111.3 and Radio 1.00.25.03. I followed the Upgrade Instructions on http://modmydiamond.info. On Step 2 when actually updating my rom, which is supposed to take 10 minutes, a dialog appeared on my mda compact iv stating that an unsecure program tries to start and i have to choose yes or no. I choosed yes. It then only took like 1 minute and the progress bar on my pc stated 100%. I then performed the Soft Reset. Now after some time my Device stated its reinitialising itself... in the end my device didnt change and its back to the Original ROM.
I think it has something to do with my rom being unsigned? But i am really not sure since i am totally new to all of this. I tried reading everything up but the information is really wide spread.
If anyone could help my by posting accurate instructions on what i am supposed to do now to get a new rom working. Would be really great, my device is pretty slow atm.
thanks
I did the same yesterday, and i still got the original T-Mobile Rom.
Is it possible to change the rom????
I thing you have no-unsignet HardSPL.
Hello,
sorry. Do yu habe the orginal Rom vor the MDA compct IV? Ich have change it and i will back to the orginal.
Please Help.
Mecki
I believe you have just installed HARD SPL .., and not actually flashed a rom yet .. could be wrong though
I installed Hard SPL olinex. In GErman : unsiegniert.
I have after this install der V6 Rom from this sites
SORRY ABOUT My ENGLISH
I have a Tmobile Mda 4 (diamond) and I want to install a custom or anonther rom, in Dutch or if the new version is avaible in English. I have found a Hard Spl(unsigned), en tryed. It was succesfull. Radio upgrade was not succesfull and rom upgrade was not succesfull. I see on my screen 0% and if i get out the battery and start again. I see Tmobile and the phone work normaly.
My Phone info:
Rom versieL 1.37.114.3 NLD
Rom Datum: 06/20/08
Radioversie: 1.00.25.03
Can somebodey help me with easy instructions?
I see much programs but I am carefully because I won't brick my phone.
I Use Microsoft Vista (home), but its no problem to use Vista premium or Microsoft XP if it is recommended
gr
Here is a very usefull Guide! bookmark this for future use and read the Sticky post, this same qeustion is popping up 2-3 times a day about rom upgrading
http://modmydiamond.info/index.php?option=com_content&task=view&id=12&Itemid=26
Dont now but seems that you can have the wrong hardspl? I use 1.93olinex and it works just fine
This ROM was created using my dumped ROM and Diamond ROM Kitchen.
I haven't done any modification, this is just the ROM as it came with my HTC Diamond bought from Claro operator. It's not the newest software for HTC Diamond but it's a good option for those brazilian customers who want to use their phones in brazilian portuguese again after using other ROMs available at this forum. Only ROM, no radio.
I've tested at my HTC Diamond and it worked fine.
Link for download is here.
dougtvale said:
This ROM was created using my dumped ROM and Diamond ROM Kitchen.
I haven't done any modification, this is just the ROM as it came with my HTC Diamond bought from Claro operator. It's not the newest software for HTC Diamond but it's a good option for those brazilian customers who want to use their phones in brazilian portuguese again after using other ROMs available at this forum. Only ROM, no radio.
I've tested at my HTC Diamond and it worked fine.
Link for download is here.
Click to expand...
Click to collapse
Hi,
Can you help me? I tried to install this Rom from Claro and just after the uptade, my Diamond froze in the first screen (Touch Diamond and radio/Rom version).
Even if i do the hard reset, it freezes again in the boot screen.
So, how could i go back to the Rom i was using before?
[Kitchen&ROM] Portuguese Brazil - WinMo 6.5 |23409| DIAMOND-GSM [PT-BR] sep/09
http://forum.xda-developers.com/showthread.php?t=560518
[Kitchen&ROM] Portuguese Brazil TF3D WinMo 6.1 |21054| DIAMOND-GSM [PT-BR] sep/09
http://forum.xda-developers.com/showthread.php?t=559387
Can anyone re-post this ROM? The link is broken...
Hello Japex, I have two solutions for you
Japex said:
Hi,
Can you help me? I tried to install this Rom from Claro and just after the uptade, my Diamond froze in the first screen (Touch Diamond and radio/Rom version).
Even if i do the hard reset, it freezes again in the boot screen.
So, how could i go back to the Rom i was using before?
Click to expand...
Click to collapse
I have two solutions, maybe can help you :
1. On your phone: simultaneously press the volume down and reset to get into boot mode.
Once you have managed this, follow the instructions on the screen of your computers with installation of rom.
2. Possibly you do not succeed the first step, obtain a version of HardSPL Diamond, .nbh or ROMUpdateUtility.exe, and running, with the phone connected to PC and in mod boot loader.
Should work, good luck and more attention next time.