I tried to upgrade my dutch mda pro to the new qtek 9000 rom after I had upgraded to the new english t-mobile mda pro rom.
He wil start i an calibrate and al that and then you get the customisation and after that reset and he starts again and you must calibrate again enzo....
But after two or three times you get the message DEVICELOCK
you have got this rom illegally
what do I do??? More important how do I get my mda pro working again with t-mobile rom??
And yes I did follow the instructions on upgrading using the bootloader principle.....
Any news on this problem? I haven't tried the update, yet, but would of course hate it to get this error...
Yes, you have downloaded the wrong ROM. with that lock in it.
Try another one.
vondutch said:
Yes, you have downloaded the wrong ROM. with that lock in it.
Try another one.
Click to expand...
Click to collapse
Which one?
Any other will do. Just try it.
I think this one is the best because it the first and only one that support AKU2 and A2DP:
ftp://xda:[email protected]/UNI_QTEK_13077_176_10900_WWE_Ship.exe
I do not think the roms on xda-developers ftp site are locked.
Maybe the device itself is locked.
Did dadio22 flash with this UNI_QTEK_13077_176_10900_WWE_Ship.exe rom?
This rom is not locked.
bambacik said:
I do not think the roms on xda-developers ftp site are locked.
Maybe the device itself is locked.
Did dadio22 flash with this UNI_QTEK_13077_176_10900_WWE_Ship.exe rom?
This rom is not locked.
Click to expand...
Click to collapse
I had one rom on the xda ftp server that had this devicelock.
Ehm it has simlock on it still but I used the new qtek rom(UNI_QTEK_WWE_13077_130176_10900_WWE_Ship) that was available on xda but I got it to work changed the provider to t-mobile and updated it again and it works again. But I don't think it works alright have got a few errors which I didn't have with the new t-mobile uk update.
Does anybody know what causes this because if it happens a lot more I think I want that t-mobile rom back. Is that possible because I think it would be a downgrade.....
wel to be honest, its a newproblem , ive never heard about ti before, as far as i know, u should ve had the Country ID error, rom locks and stuff, are to be detected through the uploader utility, but after you install it sucessfully on the system u get such an error, ik durf niet te zeggen dat ik iets over dit problem ooit heb gehoord
help
I have got the same problem. After the install from 02 rom to the qtek i get a message saying that i have illegally acquired the rom and device is locked.
neptune said:
I have got the same problem. After the install from 02 rom to the qtek i get a message saying that i have illegally acquired the rom and device is locked.
Click to expand...
Click to collapse
wow! this is the first time i've read about a device that's got locked due to an upgrade. i don't have a qtek (it's from the stingy '3' right?? ) but i've flashed several UK's m5000 and one S'pore's Dopod using every available Rom, including qtek's (just to see the differences) with no probs except countryID error on dopod. which i solved by unlocking it with Buzz's Uni_unlock program to make Super CID unlock (even tho' it is a factory sim and network unlock device but just from another region/country).
As thereis only one latest rom release that i know of (from Orange), i am sure all the roms available here and at buzzdev.net has no device lock. i guess the problem could lie with your bootloader version. if it's not BL 1.00 or 1.01 why not change it to these first bfor flashing other roms.
other than that it must be hardware related which is unlikely as the device is made by htc and only renamed qtek, and for qtek to change or tinker with it could infringe on htc's copyright.
It was only the qtek rom i had trouble with. No need for that now since the new AKU 3 rom came out. Worked Great
Related
Hi there,
First things first I'm totally a newbie. I owned a treo 650 before I got my Xda Exec, it just for lack of a better word sucked.
I have a very old ROM version (1.13.48 WWE) and the radio ROM is just as old (1.04.02) I did manage to get the device unbranded by soft restarting before I got to the Windows is installing crap that’s gona slow down your device screen.
I know I am not getting the most out of my device with this ROM. So I tried to update I wasn't able to find the latest Qtek Rom (which seems to be the most popular here, on this site) on the ftp, has it been removed? I tried to get the latest O2 ROM from the O2 site but was unable because I didn’t have a O2 Phone number. I did manage to get the Vodaphone (vf-uk_v1640_aku2_v130194_wwe_ship) and T-mobile (UNI_TMUK_12032_120_10600_Ship) ROMs but when I go to install them I get this error message.
ERROR 120: Country ID Error 22-22-44-44-44
I see the there are a few people on this site that have gotten other ROMs to work on the O2's. How was this done?
Also what is the "best" ROM to date and where can I get it?
Thanks,
Tom
PS I’ll likely have many more newbie questions in the future, sorry
Try here for the official O2 ROM (1.30.162)
http://xda.o2.co.uk/downloads/Xda_Exec_Upgrade_v1.30.162.exe
Have a look on the wiki if you want to install the ROM from another operator, or just do a search for country code error and you will see where you are going wrong- this has been posted hundreds of times before!
HTH
Fin
Thanks mate.
A while ago Dopod published a new ROM for HTC Excalibur:
CID: DOPOD001
version: 1.15.707.2
language: USA
Download: RUU_Excalibur_DOPODASIA_WWE_1.15.707.2_4.1.13.28_02.63.90_Ship.exe
Enjoy!
does this also work for the Dash or is it a s620 ROM only
I am wondering if this works on the dash or do I need to unlock it? Also, I am hoping this will work with BB Connect since it was released by Dopod just a week ago...
OK.
I am doing it now and I am flashing my DASH with the Dopod ROM. I was holding off on flashing with the test rom before and I didn't do the SPL bootloader upgrade. I'll confirm if it works with BBConnect.
EDIT: Looks like it doesn't work with TMobile DASH...It returned invalid model ID error. I am going to try and upgrade the bootloader first and see.
It didn't work for me. It looks like my dash needs to be cid unlocked first. I tried to do the bootloader upgrade and it didn't work for me. My unit just sim unlocked. How do I go about unlocking the cid as well?
Thanks
if you figure out how to CID unlock yours let me know..
if only spv developers would consider updating there spv services so that it cid unlocks the dash would be nice,?
MAN you are awesome bro!
pof said:
A while ago Dopod published a new ROM for HTC Excalibur:
CID: DOPOD001
version: 1.15.707.2
language: USA
Download: RUU_Excalibur_DOPODASIA_WWE_1.15.707.2_4.1.13.28_02.63.90_Ship.exe
Enjoy!
Click to expand...
Click to collapse
BUT just one question how come you have not been able to get your hands on the tmobile dash rom just asking do not take it the wrong way please?????
does this rom only supports USA or also other languages?
what's new in that ROM guys?
IMEI-CHECK will CID unlock it for $38 until someone writes a free app to do it.
38 bucks its too much money ! rather dante to spv developers and have them update the spv services to be capable to cid unlock the dash!
is there a change log for this ROM??
Hmmm.. I get an error [294] invalid Vendor Error. Weird Cuz i can Flash the HTC Excalibur test roms with no problem..
Here's the explanation of the error from the rom Readme file:
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
So whats the difference in this rom and the test rom? How is it running any bugs? and the improvement
DanITman said:
IMEI-CHECK will CID unlock it for $38 until someone writes a free app to do it.
Click to expand...
Click to collapse
Does anyone know who wrote the program for the old XDAs and the Wizard? Perhaps they can update it relatively easily to work on the Excalibur. Is there any other way to fool the program into thinking this is the right device and force the upgrade????
ExTREmE99 said:
So whats the difference in this rom and the test rom? How is it running any bugs? and the improvement
Click to expand...
Click to collapse
Whattup dude! As soon as i can get this rom installed i can post any changes..
I have an unlocked Dash and no go for me. Mine is CID unlocked via the $38 method as well as it is currently flashed with the previous excalibur rom.
Troy McClure said:
I have an unlocked Dash and no go for me. Mine is CID unlocked via the $38 method as well as it is currently flashed with the previous excalibur rom.
Click to expand...
Click to collapse
I have an HTC Excalibur and i still can't flash this rom. I think the ROM is CID locked thats why..
I have an unocked DASH and was able to load up the dopod rom. first you have to load up the boot loader rom thats and the ftp here, then loadup the dopod rom. I've had my dash unlock since day one from imei-check.
it loaded up just fine. the big difference i've noticed is that now when I hold down a key the alternate keys charater appears like in the tmobile rom. The font is a little bit bigger, which don't mind at all. I'm using the dash on cungular currently. i've noticed my call clarity is a bit better and the recption is better.
later,
DMunkie
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!
Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)
A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.
Is this the SEA or ANZ version?
Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.
grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.
claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...
I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.
Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?
Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.
I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.
Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.
So, has anyone successfully unlocked, hard spl and flashed a new ROM into an O2 Ignito?
There's so little about the O2 ignito here, but i'm thinking to get one and try a wwe Rom on it.
Thanks all
some people have them
http://forum.xda-developers.com/search.php?searchid=16183968
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Windoze9t8 said:
Ehh?
There's not much information relating to the "MDA Compact IV" either.
Click to expand...
Click to collapse
True true, but don't forget it's the same hardware anyway so all of the updating applies to all 3 versions of the phone.
I personally have the MDA Compact IV and have updated ROM/SPL/Radio fine, and my friend has the O2 XDA Ignito and has also updated all 3 of his so i can confirm its safe
The XDa Ignito comes unlocked as standard - you can use any SIM card in it. As for the rest - I put Olinex 1.40 on mine and then have flashed 3 different roms from here all fine
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
chippieuk said:
I'm going to put a new rom on my Ignito tonight hopefully.
First though I want a copy of the original O2 rom to put back on if necessary.
So far i've managed to dump the rom from the phone to my computer, but now just need to convert that all back into a ROM somehow.
Click to expand...
Click to collapse
same position here, i got the raw files and the spl but trying to find out how to build a rom with the raw files.
please update if youv managed to find anything
I also have the raw files but if I have no idea how to get these back into a normal flashable o2 rom! I am sure we will manage it if we need it for warranty purposes though if it comes to it
i think we need to start a new thread for this to get more attention, some of the advanced users will deffinitely be able to help.
its worth doing in my opinion
As has already been stated, there's loads of us XDA Ignito users on here. Within 2 days I'd flashed a new SPL and ROM onto my device. Would be nice to have the original o2 rom to roll back to if necessary but I'm perfectly happy with out it currently.
As far as I'm aware o2 are one of the few operators that don't lock their devices. Out of all the handsets I've had from them over the years I'm as yet to receive a sim locked one.
markquinton,
can you help us out with redeveloping the original o2 rom!
seems like you have some ccoking experience having a custom rom on your orbit! see my previuos post in this thread
I'm afraid I only built custom rom's from the base HTC one's made available for the Orbit originally when WM6.1 came out. I've never worked with raw files and wouldn't have the foggiest about how to get them back into a flashable state. Sorry!
hi all am hoping to get this thread going again as im having trouble geting Unsigned-Hard-SPL-Diamond-OliNex onto my ignito. did any of you guys have trouble?
Hard SPL on ignito
I managed to install the hard SPl onto my ignito, but have been unable to flash a new rom.
Think the pre-installed works well though, I just installed the original black theme as the blue o2 one is pants.
Radio upgrade has been fine.
Biggest recommendation I have is to install the VGA version of quick GPS. It REALLY made a difference to my satellite lock times from like 10 mins to about 10 secs
no problems with it works fine mine was on o2 software using latest dutty's now.
give it a go, loads faster now
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
And STILL not available from T-Mobile UK!
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Richard van der horst said:
Here is the link to the new MDA Compact IV Rom from T Mobile in NLD ver 1.93.1142.nld radio 1.0025.16
http://www.t-mobile.nl/persoonlijk/htdocs/page/service-contact/software-updates/mda.aspx
Click to expand...
Click to collapse
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
tismij said:
seeing as you use a T-mobile MDA IV NL like I do, can you tell me what the original HardSPL is ?
I need to reflash mine so I can send it back for repairs (bluetooth not working properly anymore), I flashed the above mentioned rom using the quick method (copy to internal storage) so I now have an original T-mobile rom and radio but the HardSPL still is not original.
Technically it should not matter for warranty but I would rather not take any risks and also restore the HardSPL, I just have no idea which one it is (1.34, 1.35, 1.93 from the SPL thread here on xda ?)
Click to expand...
Click to collapse
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Riel said:
What's the changes? Worth flashing? I use Tmobile but never did any of their roms, got an unbranded device...
Click to expand...
Click to collapse
Well,
I've used custom roms all the way from dutty's to leo's... LAst week i've flashed the new t-mobile rom. I must say it is very stable and with a few tweaks it is a very good rom.
I did this flash because always with a custom rom there was something i didn't like or didn't work. The feeling i have from this rom (I'm also on the t-mo network of course) is that this one must be tested with the best settings and the best radio for this network... because i need an stable phone.
bdanen said:
Restoring your MDA IV back to tmobile defaults is a bit tricky. You beter use the new rom update, a new SPL should be in the ROM (in the Chech version it was). I used the Chech ROM to resore my tmobile picture and used SPL 1.37, ROM 1.37 and radio 1.00.25.03. All of these can be found in the forum.
Click to expand...
Click to collapse
so the Chech ROM also replaced your HardSPL, which you then replaced again with SPL 1.37 ?
(why replace the HardSPL again ?)
I guess I will round up a windows PC and reflash using the the rom update .exe and see if my HardSPL gets replaced.
(I kind of asumed the HardSPL never gets updated with a rom update, hence my confusion)
Shame there isnt a way to update the HardSPL without a windows PC
Should the HardSPL not get replaced by the update I can safely use the 1.37 version from xda ?
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
feestbeest said:
I am useing this rom at the moment and it is very good and very stable and very fast rom.
With other roms i had problems that my phone wouldn't wakeup anymore and needed to softreset it. With this rom so far i do not have the problem.
Ofcause i only use it for 2 days so far but i will let you know how it will be after a while. For the problem that the phone does not wakeup anymore with other roms i had that problem after 1 day already so i think the t-mobile diamond is differend then the real HTC diamond.
Only the t-mobile colors are terrible but there are enough themes and skins to change it to what you want.
Jan
Click to expand...
Click to collapse
Did your HardSPL get updated too when you updated your rom ?
If no which HardSPL do you have now (if it is the original that is) ?
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
I made a new rom which will work on DIAMxxxxx (all) diamonds.
It's full 143mb (including SPL and RADIO, so Stock, only diam200 is removed).
IF interested I put online. Made with Olinex nbh thing,
same problem here
Riel said:
I run 1.40 olinex, it says wrong device ID.
?
I have original DIamond, is that problem?
Click to expand...
Click to collapse
Same for me
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Riel said:
This ROM will fix that. Please, use it if you NEED it to save my bandwidth
http://www.rielity.nl/RTC/RUU_signed.exe
(Its sfx-exe, no worries, not many people have 7z)
Click to expand...
Click to collapse
Sounds great. So this includes a stock signed spl?
It is 100% the same rom, and you will not get the Device_id error.
T-mobile service-desk WILL see this is not original T-mobile rom I think because ROM name is not the same (T-mobile instead of 1.93.blabal).
sms problem
Help, I flashed this new t-mobile ROM and now I an't send SMS. They stay in postvak uit. In tried flashing another radio and settings in comm manager. But nothing happends.
Try this, I had the same problem with several other roms.
Thank you very much. I tried it and after a softreset it is possible to send SMS now.
REmoved the rom.
It's really too slow
Sorry to bump this one, but does the t mobile NL rom update the SPL to stock?