hello,
i've got serieus problems whit my diamond,
when i turn on the device the only thing i see ist the htc diamond page,
when i wan't to hard reset it it show's
no image found and then trigger usb host... after 5 min the reg green and bleu screen
when i plug it in the pc it doesn't do anything i dont see a external storage
can somebody help mee
sorry for my english i'm dutch
1. Hard reset is Vol Down + Enter + Stylus reset
then follow the screen
2. If you want more help please give the information from bootloader
Get bootloader is Vol Down + Stylus reset
Good luck
don't help ive done that
bootloader
diam100 mfg 64M
spl-1.49.olinex
micropodiam led v11
psoc-diam stage_ovt v0x30
serial
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
ketie007 said:
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
Click to expand...
Click to collapse
hi
Please do not double post, if you explain your problem in one thread you will get answer.
Read your other post "no usb connection"
Good luck
Related
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
dosada said:
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
Click to expand...
Click to collapse
hello my friend ithink you stuck on boatloader please se related theards and posts
dont forget to take a look at wiki
if your problem dosen't solve continue this theard
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
dosada said:
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
Click to expand...
Click to collapse
Hi,
Bootloader combination key is Backlight + Power + Reset.
1] Make sure you connect the USB cable to main USB port on computer and
not the USB extesion / hub.
2] Remove any SD card you may have inserted in the card slot
3] try to flash again it must be completed
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Please don't make the same post in more than 1 forum, I have replied to your other thread here: http://forum.xda-developers.com/showthread.php?t=420493 which should contain enough information to get your device working again, hopefully.
I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!
Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.
same thing here!
any solution to repair dead diamond !!?
any news to repair this phone
Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.
do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........
how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker
any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc
Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.
Any solution about dead diamond? ?
Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.
whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?
htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly
I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Try to follow the correct flashing procedure: disable the USB connection in connections setting on your AS, remove all cards, put your JasJar in a bootloader and re-flash.
asad111 said:
I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=289325
Please
Please The boot Loader Screen is not Com.
No any Screen in my PPc naw?
sorry if a simple questions, but is your battery fully charged?
Please
The Battry is Full Charge.
My JasJar is not Wrking.
No Boot Loader Screen it Com.
No Hard reset Screen it Com.
No any thing it com in The Screen.
Olso If I Boot My JasJar in Charge no any pawer in the JasJar.
USB he cant reed my JasJar .
What i can do?
How do you know the battery is fully charged if Jasjar shows no charge? Have you got an external charger? I read somewhere that if the battery goes very low you have to charge it with a wall charger instead of USB.
I've also read that if you remove the battery, press the reset hole for some 10 seconds and while still pressing it, re-insert the battery and let go of the reset hole it will restart normally.
Did you drop the Jasjar? Did it come in contact with water, coffee, tea, vapour, toilet?
Are you careful or clumsy when inserting USB lead? You may have damaged the USB port in Jasjar.
Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...