plz help about freez on boot screen pllllllz - JASJAR, XDA Exec, MDA Pro Software Upgrading

my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live

Please don't make the same post in more than 1 forum, I have replied to your other thread here: http://forum.xda-developers.com/showthread.php?t=420493 which should contain enough information to get your device working again, hopefully.

Related

bootloadr hange up

i flashed my touch diamond with a cooked rom every thing went well untill 1st reboot after completing the flash then black screen with diamond touch logo and nothing i have tried soft reset many times usb cable is not detectable then i tried the program ECShift.exe
when i write ECShift.exe -bl in cmd it says "could not open EC!" so i can not use mtty please help what i can do with the device is it now broken for final or it can be repaired since i can not log in to bootloader
also when i switch it off and put the usb cable it indicates that it is recharging but when i try to turn it on it doesn't start and if i unplugged the usb cable now it still gives me the indication for recharging (whispering light)
usb is not recognized even when making hard reset without formatting the internal storage i get the colored screen the the 3 choices so fast even the diamond does not detect it is connected to pc it suppose to give me a screen writing usb
hi i have the same problem with diamond! you can fixed?tanks

Pleas Help me I have JAS JAR

I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Try to follow the correct flashing procedure: disable the USB connection in connections setting on your AS, remove all cards, put your JasJar in a bootloader and re-flash.
asad111 said:
I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=289325
Please
Please The boot Loader Screen is not Com.
No any Screen in my PPc naw?
sorry if a simple questions, but is your battery fully charged?
Please
The Battry is Full Charge.
My JasJar is not Wrking.
No Boot Loader Screen it Com.
No Hard reset Screen it Com.
No any thing it com in The Screen.
Olso If I Boot My JasJar in Charge no any pawer in the JasJar.
USB he cant reed my JasJar .
What i can do?
How do you know the battery is fully charged if Jasjar shows no charge? Have you got an external charger? I read somewhere that if the battery goes very low you have to charge it with a wall charger instead of USB.
I've also read that if you remove the battery, press the reset hole for some 10 seconds and while still pressing it, re-insert the battery and let go of the reset hole it will restart normally.
Did you drop the Jasjar? Did it come in contact with water, coffee, tea, vapour, toilet?
Are you careful or clumsy when inserting USB lead? You may have damaged the USB port in Jasjar.

HELP PLZ!!!!! (rom fail ?)

Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...

[Q] htc one x usb port or what ?!!

hello
i have htc one x
firstly i didn`t know its problem
when i connect it with my laptop my laptop shows"usb device not recognized"
i thought this is because unofficial Rom
so i put a rom software via wifi "moborobo" on the phone
and tried to flash it via booltloader but without wiping
now it is still rebooting and can`t access to recovery or anything " i think it called boot loop "
and cant solve it by fastboot cause it is not recognized on laptop
so u think what is the problem
trying to replace usb port or doing what ?
is usb port is connected to the board so i have to replace the whole board ?!
what steps should i do ?!!
or it is already damaged and no hope !!!
please help
mostafa_tofa said:
hello
i have htc one x
firstly i didn`t know its problem
when i connect it with my laptop my laptop shows"usb device not recognized"
i thought this is because unofficial Rom
so i put a rom software via wifi "moborobo" on the phone
and tried to flash it via booltloader but without wiping
now it is still rebooting and can`t access to recovery or anything " i think it called boot loop "
and cant solve it by fastboot cause it is not recognized on laptop
so u think what is the problem
trying to replace usb port or doing what ?
is usb port is connected to the board so i have to replace the whole board ?!
what steps should i do ?!!
or it is already damaged and no hope !!!
please help
Click to expand...
Click to collapse
Are you able to access the bootloader? (Holding down the on button and volume down button)
VoLTz4Dayz said:
Are you able to access the bootloader? (Holding down the on button and volume down button)
Click to expand...
Click to collapse
after days the battery is out
and i don`t know what happend now it is not charging also and cant open
mostafa_tofa said:
after days the battery is out
and i don`t know what happend now it is not charging also and cant open
Click to expand...
Click to collapse
Ah .. Are you sure it won't charge? Try plugging it into your PC and a normal charger.
VoLTz4Dayz said:
Ah .. Are you sure it won't charge? Try plugging it into your PC and a normal charger.
Click to expand...
Click to collapse
no it is not charging
when i connect it to lap top or charger
it still shows intermittent red light
it its not charging and and still shows the red light intermittent red light
usb port is damaged or what ?!!
and if it is damaged this port is connected to the board ?! or i can replace another one without changing the board ?!
When you hooked it up to the pc and the red light starts blinking try to keep pressing combo buttons. Power and volume down button, keep them pressed and try if needed many times. Check to see if you can get it to the bootloader. Once it hits the bootloader you execute this script with admin rights from the fastboot folder on the pc
https://www.dropbox.com/s/aaah8gqz8j024xz/Batt script.bat
Mr Hofs said:
When you hooked it up to the pc and the red light starts blinking try to keep pressing combo buttons. Power and volume down button, keep them pressed and try if needed many times. Check to see if you can get it to the bootloader. Once it hits the bootloader you execute this script with admin rights from the fastboot folder on the pc
[ur
Click to expand...
Click to collapse
i got in to the bootloader
but the laptop shows"usb device not recognized"
and doesn`t accept any commands
and doesn`t acces to recovery or factory reset
just question usb socket is a aprt of the board or sparated part i can replace it without canging the whole board ?!!!
it just a suggestion it is because usb charging socket
Afaik it's part of the mobo. But are you using the original HTC cable, isn't it the cable at fault ? Using a straight powered usb 2.0 port on the pc ?
Mr Hofs said:
Afaik it's part of the mobo. But are you using the original HTC cable, isn't it the cable at fault ? Using a straight powered usb 2.0 port on the pc ?
Click to expand...
Click to collapse
what do you mean by "aAfaik it`s part of the mobo" ?! u mean usb socket is a part of the board ?!!
and i`m using the original cable and a straight powerd usb 2 port
i tried it with many cables and laptops and pc they are all the same
so what ?!!!!!!!!!
any suggestions ?!!! what i have to do !!!
any thing ?!!
Take it to a shop !

help please

hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGGio hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh

Categories

Resources