my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Please don't make the same post in more than 1 forum, I have replied to your other thread here: http://forum.xda-developers.com/showthread.php?t=420493 which should contain enough information to get your device working again, hopefully.
Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply
try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...
to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^
Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help
USB??
its just installing the usb driver but show no usb
simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...
I have seen this earlier but forgot to share. when i was installing bada 2.0 , i connect my phone to pc and without putting my phone in download mode , i clickd on port search in multiloader, and suddenly my phone screen got blank and a icon of a phone and a arrow pointing towards phone icon appeard. I didnt take any risk so i disconnected my phone and put it in download mode for further flashing process. My question is -
can we use that mode to flash firmwares in the phone?
Sorry i cant post a pic because i dont have means to do it.
this mode was also in previous version of bada.. its the kind of download mode wich is used by kies when updating the firmware , and you can access it , when you connect your phone and just press port search
it is also known as debugging mode!.....lol
and you can use it to flash through multiloader!
loooooooooooooooool
it is download mode for sure
i use it and it is the same as pressing the buttons
mylove90 said:
loooooooooooooooool
it is download mode for sure
i use it and it is the same as pressing the buttons
Click to expand...
Click to collapse
in bada watever when you connect your phone to pc and select debugging mode and open multiloader this screen containing a blue phone icon pops ans yes it is the same as pressing the keys and thats wat i said !
RE
This is normal. Just like download mode.
Hy. I install some software to add the posibility to reset my tablet when my son put pasword and forget :silly:...al good for 2 days,but now my tablet is not switch on again,I try al the difrent combination with presing and hold difrent buttons but nothing.Strange is that if i conect on the USB my computer signal me the something is conecting...but under ODIN nothing apear.
What to do???
livirys said:
Hy. I install some software to add the posibility to reset my tablet when my son put pasword and forget :silly:...al good for 2 days,but now my tablet is not switch on again,I try al the difrent combination with presing and hold difrent buttons but nothing.Strange is that if i conect on the USB my computer signal me the something is conecting...but under ODIN nothing apear.
What to do???
Click to expand...
Click to collapse
At first charge your Tab for 4-5 hours,than try to Boot into Recovery mode and do a factory reset.
You will lost all your privat settings, also your look pin.
bierma32 said:
At first charge your Tab for 4-5 hours,than try to Boot into Recovery mode and do a factory reset.
You will lost all your privat settings, also your look pin.
Click to expand...
Click to collapse
I let'it charge 8 hours but nothing,If i try to but on recovery nothing apear on screen..is dead.Only when i conect to USB port it apear on my computer,but is UNKNON DEVICE.No ODIN no KIES nothing.I thing that is briked :crying:
Btw.Thx for your help.
hmmm
livirys said:
I let'it charge 8 hours but nothing,If i try to but on recovery nothing apear on screen..is dead.Only when i conect to USB port it apear on my computer,but is UNKNON DEVICE.No ODIN no KIES nothing.I thing that is briked :crying:
Btw.Thx for your help.
Click to expand...
Click to collapse
hey,
take your tab into a DARK room, power on like you would normally, look at the screen at an angle while holding down
the power on button, if no light emits from it, do the recovery boot, and if again odin mode.
if you see light emitting from your screen on regular boot do not shut tab down, take it directly to your computer
and connect open your my computer icon on desktop after get adb running, in adb type adb start-service [enter]
then, adb devices [enter] if it's connecting your device number will show. additionally ask your son specifically what happened,
dropped,submerged,power surge,left sitting in sun etc.
for odin try connecting your tab FIRST then fire up Odin and see if it grabs. keep you flashable firmware/kernel/recovery
ready.
now the device i used to have was a rockchip tab but, i had a similar problem.
if any results please post an update.
m
Try in a dark room...nothing.It stay for 24 hour at charge. When i conect to cumputer it apear as a device cal EMEI.But canot fiind drivers...
I try even with ADB but nothing
,,C:\Users\Iry>adb devices
List of devices attached"
I dont know what to do ...
livirys said:
Try in a dark room...nothing.It stay for 24 hour at charge. When i conect to cumputer it apear as a device cal EMEI.But canot fiind drivers...
I try even with ADB but nothing
,,C:\Users\Iry>adb devices
List of devices attached"
I dont know what to do ...
Click to expand...
Click to collapse
Problem Solved...Samsung replace this device becouse of motherboard problem...Thx a lot for trying to help to evrybady.
livirys said:
Try in a dark room...nothing.It stay for 24 hour at charge. When i conect to cumputer it apear as a device cal EMEI.But canot fiind drivers...
I try even with ADB but nothing
,,C:\Users\Iry>adb devices
List of devices attached"
I dont know what to do ...
Click to expand...
Click to collapse
bro; your device bricked. need special tool like easy jtag box..
shanavas74 said:
bro; your device bricked. need special tool like easy jtag box..
Click to expand...
Click to collapse
Thx man,problem solved.Samsung replace the device ))Have a nice day.
any one have a solution to turn on my mobile dead boot nothing showing on screen .. but when i connect my phone to pc then pc shows in device manager and odin com port also but when i start to flash than nothing happend ( no recovery no download mode jig not working ) what can i do ?