Develop Bugs

plz help about freez on boot screen pllllllz

my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live

Please don't make the same post in more than 1 forum, I have replied to your other thread here: http://forum.xda-developers.com/showthread.php?t=420493 which should contain enough information to get your device working again, hopefully.

htc diamond dead :(

I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!

Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.

same thing here!

any solution to repair dead diamond !!?

any news to repair this phone

Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.

do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........

how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker

any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc

Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.

Any solution about dead diamond? ?

Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.

whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?

htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly

diamond rom crashed?

hello,
i've got serieus problems whit my diamond,
when i turn on the device the only thing i see ist the htc diamond page,
when i wan't to hard reset it it show's
no image found and then trigger usb host... after 5 min the reg green and bleu screen
when i plug it in the pc it doesn't do anything i dont see a external storage
can somebody help mee
sorry for my english i'm dutch

1. Hard reset is Vol Down + Enter + Stylus reset
then follow the screen
2. If you want more help please give the information from bootloader
Get bootloader is Vol Down + Stylus reset
Good luck

don't help ive done that
bootloader
diam100 mfg 64M
spl-1.49.olinex
micropodiam led v11
psoc-diam stage_ovt v0x30
serial

when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx

ketie007 said:
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
Click to expand...
Click to collapse
hi
Please do not double post, if you explain your problem in one thread you will get answer.
Read your other post "no usb connection"
Good luck

HELP PLZ!!!!! (rom fail ?)

Hi all u guys out there hope someone can help me i installed this rom on my diamond the name was TEAL or some like that the first few times it was fine but then my battery was running low and then when i turned my diamond on again i had 2 setup mobile and now it just keep showing the screen that says it wanna setup and i cant acess USB from there so plz if u can help me recover my diamond plz reply

try update from Boot Screen
Blackster..try updatin frm boot screen..go in boot screen & then connect it to usb & try updatin the ROM...

to get in your bootscreen just reset your device while holding the volume down button
just so you know ^^

Tried every thing
,My vista wont show the usb from hardSPL and i cant connect from the setup and when i just installed the rom again it wont work
nothings work plz help

USB??
its just installing the usb driver but show no usb

simple thing
just run RUU from u'r PC...
Follow 1st Two steps by clicking next...
no need to perform mentioned task in RUU.
Connect USB Cable PC to Diamond...
On diamond hold on off button and volume down button and hit reset button on back..
you will forwarded to boot screen on diamond...
It will automaticly identify u'r USB connection to PC...
Once it displays USB on diamond boot menu, Hit Update button on RUU running on PC...
Then follow the RUU instructions...
Once finished, you have done...

[Q] bricked tilt 2

help please!
i preformed task 29 on my tilt 2 and i now have an ATT screen and wont go any further. when i try to stat it it only goes as far as the first screen and no further. i tried resting it to no avail. i can not establish connection with pc. i have vista for pc. can somebody help please?

Yes. now u preformed that, you want to plug in your USB. Push reset and the lower volum button at the same time. You will go into boot loader mode. It should say USB on the bottom once u have made a connection after connecting your USB to the computer. At that point flash your Radio, after flashing your radio, flash your rom. All like you normaly would ..
PS. make sure Sim and MScard is out of phone before preforming Flashing Radio, then the rom. Then replace the sim card after all the installation from the rom you are installing..

First go back to the task 29 post and read all the instructions.
Task 29 is a memory wiper,it completely wipes the memory of the device leaving only the radio and basic functions.
To get up and running again follow these instructions:
1. Download the newest stock rom for ATT found in the Rom Development forum. http://forum.xda-developers.com/showthread.php?t=737168
2. Remove back cover from the device, remove the battery, remove the SIM card and remove the SD card if you have one. Reinstall the battery, do not replace the back cover.
3. Power up the device and connect it to the PC. Press the down volume button and press and hold the stylus into the reset button, hold both until the boot screen appears. Windows may install some software at this time, let the software install.
4. When USB appears at the bottom of the boot screen run the ROM installer software run. Follow ALL on screen instructions.
NOTE: If you have Hard SPL installed you can install any custom ROM, if not you MUST install a STOCK SHIPPED ROM.

twh said:
help please!
i preformed task 29 on my tilt 2 and i now have an ATT screen and wont go any further. when i try to stat it it only goes as far as the first screen and no further. i tried resting it to no avail. i can not establish connection with pc. i have vista for pc. can somebody help please?
Click to expand...
Click to collapse
First of all check to see if your phone is hardspl'ed by turning phone completely off then hold volume down key then power phone back on from here you should be on tri-color screen see what the spl version says if it says 0.85Olinex it's hardspl'ed anything else is not hardspl'ed.
If your phone is hardspl'ed then your good all task29 does is wipe your entire os off your phone thats why it won't boot to nothing but the startup screen so in order for it to boot you need to flash a rom on to it, so like before power phone off hold volume down key & power phone on you should be on tri-color screen again at the bottom of phone screen it should say serial now plug in usb from computer now it should say usb at the bottom of phone find a rom that you like then flash it phone should reboot after flash & work like normal once again.
Hope this helps

thank you all you guys. you all were awesome. as you could imagine, i am new to wm. but with the help of every body, i got my phone up and running.

twh said:
thank you all you guys. you all were awesome. as you could imagine, i am new to wm. but with the help of every body, i got my phone up and running.
Click to expand...
Click to collapse
no problem i'm glad we all were able to help you