Hello,
I just installed Tomtom7 on my pro2. but now the bluetooth stack is broken.
On other websites they say that tomtom replaces BtCoreIf.dll and BtSdkCE30.dll I already removed them and soft reset, but that doesn't work.
Can someone with a Pro2 upload those 2 files so that i can replace them on my phone? That will be the fastest solution i think... Thanks!
When this happened to me I had to hard reset, then re-install TomTom without the BT files. I'm still not entirely clear what the problem was, though, or how to correct it without hard resetting, but those files seemed to have corrupted something.
had The same problem had to hard reset. teach me to get a pirate version
I'm having the same issue. So removing the files from the cab fixes it?
______________________________________
Watch my full in-depth review of Touch Pro 2
http://www.youtube.com/watch?v=VgTjSbpFDhQ&feature=channel_page
No problems on my site... Using tt7.915
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Corell said:
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Click to expand...
Click to collapse
Runing gr8 with internal GPS
Roberto79 said:
Runing gr8 with internal GPS
Click to expand...
Click to collapse
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Roberto79 said:
No problems on my site... Using tt7.915
Click to expand...
Click to collapse
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
RMU said:
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
Hmm dont have any of posted problems looks like i was just lucky lol but maybe that somthing jumps up later when i'll "really need it"...
Corell said:
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Click to expand...
Click to collapse
Its the latest release of tomtom7 so it has to work at least a bit older version works gr8 on my TP2, resolution is superb. I have tryed Amigo but it didnt work even with multi resolution .gro file
RMU said:
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
now i see that is not a tomtom problem, because i've hard reset my pro2 and not yet installed tomtom, so i've made another thread for this.
but the bluetooth problem is still there when i install tomtom
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
It seems to be. It corrupts the files.
_________________________________________________
Check out my full in-depth videoreview of the Touch Pro2: http://www.fuzemobility.com/excellent-htc-touch-pro-ii-video-review/
dicko99 said:
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
Click to expand...
Click to collapse
Uninstalling tomtom does not help for me.
The files are replaced on the device so a hard reset is the easiest way back.
TT 7.910.9185 is running fine on mine, I did have the same issue with another version of TT7 though, but simply hard reset to recover and started again.
I think (although have not verified) that the BT Stack on the Rhodium has been updated to a Broadcom stack.
Can confirm that the above version works fine, great resolution and no issues using BT after install and with the new BT Stack you can now route all audio from the Rhodium through your hands free / car kit
Cheers,
Beasty
I did have a problem with v7.915.9196 where the device bootup was delayed by about a minute and a half (from 1m20 to about 3m from cold to starting Mobile Shell) which I had to get around by not installing the TomTom BT files.
I used TT7_915.9196_VGA__Negro.cab which does not appear to have the bluetooth files in it.
and this version could also be purchased on tomtom with ur chosen map on an sd-card? just to avoid having to hard reset and stuff after trying to install
thx.
I removed the bluetooth files from the cab with WinCE CAB Manager and installed tomtom agian, now everything works fine.
I'm now using tomtom version 7.450.9028 , i think it will work with other versions to
Thanks!
wonderful, great info now i have one less thing to worry about when my TP2 gets here thanks dude!
EDIT.: Pardon the perhaps n00b question, but i get an error while trying to run the .exe. is it meant for running on the phone or on the pc? i use winxp
Related
Hi all,
I have an XDA Orbit on O2 which I got last week.
I have TomTom installed on the phone with the maps and voices etc on the MiniSD Card.
I went to use TomTom today, and it showed be the EULA and said No Maps available. I checked the SD Card, and I could access it and launch other applications which are installed on the SD Card.
I soft-reset the device, but still no fix.
Re-installed TomTom, and when it launched after installation it ran fine, however when I shut it down and opened it again i failed and showed No Maps once again.
I read http://forum.xda-developers.com/showthread.php?t=285511&page=1&highlight=Storage+Card thread, and installed the HTC Patch incase this was affecting me, however there is no change.
It seems that I can run TomTom if I re-install everytime I want to use it, however that obviously is no use at all.
Any help would be grately appreachiated, as I'm a little annoyed by this being that I have only had the phone for a week.
have you tried putting the maps on the device storage rather than your SD Card? some applications dont like being split over device and SD.
I have TTN6, and have the maps on the device under 'Program Files/Navigator/Zip/'
Hope this helps.
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Is the name of the TT-map map correct on minisd?
Check spelling.
richard_j_green said:
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Click to expand...
Click to collapse
..same issue
I had the same challenge.
There are one or 2 ways to resolve the issue.
1. Delete the maps, un-install TomTom software, you also need a reedit software to delete all references to TomTom in the regostry. Delete all other TomTom relevant files on the device /Program Files/navigator; /My Document/TomTom. Then soft-reset before installing all over again.
This I did for a friend.
2. In my own case, I reflashed with a new ROM, then installed all over again.
However, my friend had a cracked version, and I told him to go pay for the original, as you only need to pay for the maps these days. I cannot guarrantee 1. will always work.
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Just to clarify the technical points:
I am running the O2 WM6 ROM that was pre-installed on the device, and am using a SanDisk 2GB MiniSD card.
I don't see your TT version
What is your tt ver?
richard_j_green said:
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Click to expand...
Click to collapse
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
You have TT6
But was yout tt's version before??
richard_j_green said:
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
Click to expand...
Click to collapse
I'm using the same version now as previously on WM5 - Is that my issue?
I don't have the Mini S with me now, so I can't fire the software up right now, however I will look tonight and post the version, unless someone can tell me a way to find it some other way in the mean time?
Thanks
i dont think u can find the version number, apart from when u are running the program... just had a quick look on mine, and there aren't any files that look useful.
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Just open TomTom and press where the signal strength is shown, it will show at the bottom right, at least in version 6.030.
I hope you know that map's from TT5 are not compatible in TT6
richard_j_green said:
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Click to expand...
Click to collapse
Hiya mate i used to have this problem too
1. Make sure u dont have bluetooth explorer switched on
2. soft reset your device see if that works
Hi all,
I knew I wasn't being stupid trying to find the version number, so I've taken a picture of the GPS Signal screen - Attached.
I disbled Bluetooth Explorer and this is now working again perfectly, without changing the maps - These maps I have used on WM5 and WM6.
I personally don't see why Bluetooth Explorer would do this, unless TomTom is foolithly trying to look for maps over Bluetooth, but thanks for the help everyone.
to find the version number with TTN6:
-Start TomTom
-Tap on the bottom right of the screen where it shows time/speed/signal strength
-it should bring up a screen which shows your last route, signal on the right and bottom right of the screen the version, which you can tap on and get a detailed view.
Hope this helps.
I also have the same problem, where it says no maps found. It used to work and then all of a sudden it stopped. It is not a cracked version.
Can someone please help me!
Thank You
did you try the soultion in reply 16? it worked for me
Hi!
In my Artemis is annoying problem. Navigator 6.03 stops opening, when "the hands" are on the display. This happens about three to four times a week.
I have to make a soft reset after that. (I use TomTom daily.)
The second symptom, which probably comes from above, is that I can not make a phone call. All things seem to be OK, but I can not receive or make a phone call. (I give pin -code and the phone shows good fieldstrength.)
I have Vanilla 1.0 in my phone.
Please, help me. This is the only problem, what I have with Vanilla 1.0
"PS. I think I found the reason. See below!"
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Motero73 said:
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Click to expand...
Click to collapse
Did you make a backup copy of all in microSD, formatted the microSD and put all back?
I just copied the files from the microSD backup that had to do with TomTom (f.e. Program Files/Navigator), and put them into my microSD overwriting the ones that I had at that moment.
It seems that some file was corrupted, and making this solved the problem.
Get update from myTomTom
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
chribo28 said:
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
Click to expand...
Click to collapse
Hi!
I cannot find any other than 6.03 -version. Could you send me Internet site address.
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
nm8 said:
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
Click to expand...
Click to collapse
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Matti23 said:
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Click to expand...
Click to collapse
The phone was shut down during the night. I opened it and started TomTom. All went OK. I shut TomTom and wrote sms -message. The writing was quite sticky. Artemis did not send the message, because it was jammed.
I took away all POIs and loaded the map again.
I hope this solved the problem.
Matti23 said:
I took away all POIs and loaded the map again.
I hope this solved the problem.
Click to expand...
Click to collapse
You dont need to delete POIs. Just disable them from displaying when youre running Tomtom.
Change Preferernces > Enable/Disable POIs
then untick everything.
TomTom used to crash on a regular basis on my Artemis because I had it overclocked to 286MHz and when it was plugged in to the car charger the battery was getting very hot so it would freeze then reset after 5 minutes or so. Very annoying but I now have to restore the original clock speed each time I use TomTom, this may well be the issue you're having?
Change your SD... I had freezing problem with SD and microSD on both 9100 and P3300. After using new hight quality cards, no more problem.
Probly I found the reason
I think I found the reason for my problem, when TomTom freezed, when loading it.
I had enAlarmPPC v.3.3.1 -program, which caused that. I removed the program, and I have had that problem any more.
Now every time, when I change the time, I got an error message: "Cannot execute\Storage card\Program files\enAlarmPPC3.3.1\enAlarmPPC.exe"
I can not get rid of that message. I have souhgt it in the registry, but there are no mention of that.
Does anybody know this problem?
PS. I got a little program, which took away that error message. I could find it here: http://www.maik-wiege.de/en/FAQ/enalarmppc/uninstall.html
I've had just the same problem with Tomtom and had to keep restarting my PDA to get Tomtom working again.
Then I realised that whenever it ist stuck with the "hands" in the bottom corner but won't display tomtom screen, there is a "notification" waiting to be displayed.
Once you've tapped on the "Notification" text at the bottom left of the screen to clear all the notifications, then Tomtom will display itself again - without rebooting the PDA....
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....
daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too
Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael
rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!
I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.
update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...
T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR
SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.
is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here
I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know
That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?
any answer to the sdhc update whereabouts?
shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!
personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone
Hi,
I signed up a touch HD with orange UK yesterday. The first thing I did was to install TOMTOM on the machine. However, TOMTOM kept reporting no GPS device. If it finds the internal GPS receiver, then it is 20 minutes later. One thing I notice is that when TOMTOM is looking for the GPS receiver, there is something trying to connect to the internet.
I am sure I did everthing right as I was using this copy of tomtom on the touch diamond and it worked like a treat.
Did orange do anything to the GPS so people can only use their stupid orange map? If they did, is there any way that I can get the tomtom working?
Many thanks in advance.
Thank you for all your advice and the problem has been solved. Here are a few tips for people who have the same problem.
1. A-GPS can only make things worse, switch it off.
2. Update your quick-GPS data.
3. It seems that tomtom struggles to find GPS device on certain orange handset. If you are the unlucky one, try change your hand set with orange. If you don’t want to go through the trouble, open google map to locate satellite before open tomtom.
4. Debrand the handset.
5. Orange’s customer service is crap, stay away if you can
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
mijyou said:
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
Thanks, I have updated the quickGPS the first thing. I have the a-gps enabled, though it could help to locate the satallite.
I think it is recomended to be disabled.
Perhaps try it if you have not.
GPS always worked fine for me with the stock Orange ROM, that was with 1.14 though, I think they come with 1.19 now, it also works fine with all of the cooked ROMs I've tested. Perhaps the version of TomTom you have isn't fully compatible with the HD (I did notice you said it worked on the Diamond, but perhaps there's a hardware/software difference on the HD which stops it working.
mijyou said:
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
that was the most important one
I am happily have 3 navigation programs on my HD, Tomtom, iGO, Navigon
but I always prefer iGO
Hi Guys, Thank you for your reply.
For you who is using tomtom, which version are you using? I am using 7.48
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
mmp7 said:
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
Click to expand...
Click to collapse
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
MrKaon said:
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
Click to expand...
Click to collapse
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
spud_work said:
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
Click to expand...
Click to collapse
may I ask what version of tomtom are you using?
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
spud_work said:
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
Click to expand...
Click to collapse
thanks for telling me.
ok now for everyone which already had tomtom without 7 digit postcode, do as I listed here:
01- Downloaded the file
www.tomtom.com/updates/great_britainpostal_all.zip
02- copy it into new folder (folder's name doesn't matter)
03- extract it.
04- click on setup.exe
05- choose "i agree" then click next.
06- choose Pocket PC (Windows CE)
07- choose install Tom Tom Great Britin Postcode then click next.
08- choose other location (Advanced)
09- choose Folder on the computer
10- select any folder you want
the software will generate a zip folder
after getting the zip folder move it to your SD card's Root
start TOM TOM you will be able to do a full 7 digit postcode search.
dead link
link not working for me?
can some one try it and report working or not
thanks
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
leggoman said:
link not working for me?
can some one try it and report working or not
thanks
Click to expand...
Click to collapse
oops my mistake try it again should be work now
djmc321 said:
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
it shouldn't be like that, when I had Stock ROM on my HD I used to had similar problem beside long waiting time before tomtom finds signal (about 15 ~ 20s) but after flashing HD with Custom ROM every problem is gone, now it finds signal in less than 5 second
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
Exactly what I was going to say.. I had the same problem with mine running 7.9something. If you run google maps in the backgroungd it almost jump started the gps. I have also found that once you get a gps signal it seems to keep it easier..... dunno if thats just hopeful. Oh yes and I am on Orange too stock rom.
Hi, I see some threads that suggest TomTom 7 can be installed on a Touch Pro 2. I bought TomTom 7 on micro SD and it won't run. I get a message "Your device is not compatible with this version of TomTom NAVIGATOR!" Is there something simple that I am missing that is causing this. TomTom support were no help.
Offtopic: Why not ask your question in one of the threads you have found
Ontopic: Officially the TP2 is not supported at this moment. It will work, just ask Google
Hi PGLion.
I started a new thread because none of the other threads were actually about TomTom7 on the TP2, they just gave me hope!
On the ask Google suggestion, I may be a bit slow, but I have not found anything that helps me. If you have a link that you think will help, I'd be very grateful if you could post it.
TT7 on TP2
Hi,
Has anyone got TT7 working on TP2 yet? I've checked on google can't find a copy
Thanks.
simple1i said:
Hi,
Has anyone got TT7 working on TP2 yet?
Click to expand...
Click to collapse
yes,
try >"7.910" "(9196)"< as search terms in google.
before installing that version you should also chek the reports of other users stating that after installation bluetooth stopped working.
You want "ttn7.915.9196.vga_black.cab"
Works fine.
In fact a quick google takes us to this very site:
http://forum.xda-developers.com/showthread.php?t=482075
Bluetooth still working fine for me.
Yes, TomTom7 DOES work on TouchPro2. I use it almost daily. It's very nice.
But it DOES cripple bluetooth (at least the build that I'm using). It replaces a couple of bluetooth drivers in your Windows directory that are incompatable (or so it appears).
If anyone's having issues with this, PM me. I'll find the thread (I think it was at PPCGeeks) that has instructions re: fixing it.
Trevor_g said:
Yes, TomTom7 DOES work on TouchPro2. I use it almost daily. It's very nice.
But it DOES cripple bluetooth (at least the build that I'm using). It replaces a couple of bluetooth drivers in your Windows directory that are incompatable (or so it appears).
If anyone's having issues with this, PM me. I'll find the thread (I think it was at PPCGeeks) that has instructions re: fixing it.
Click to expand...
Click to collapse
To save looking - you will need to rename or delete the following dll files in the \windows directory:
\windows\BtSdkCE30.dll
\windows\BtCorelf.dll
Tomtom 7 on TP2
paraicbegley said:
Hi, I see some threads that suggest TomTom 7 can be installed on a Touch Pro 2. I bought TomTom 7 on micro SD and it won't run. I get a message "Your device is not compatible with this version of TomTom NAVIGATOR!" Is there something simple that I am missing that is causing this. TomTom support were no help.
Click to expand...
Click to collapse
i too can confirm that TT7 works on TP2, might be best you use a software called cabinstl to install the cab file to your required location
The biggest problem I'm having is some serious GPS lag on my Verizon Touch Pro2 running TomTom (I've tried v6 and v7).
TOMTOM 7 install issues on Tilt 2
Has anyone had problems with the install going automatically to the device and not having enough memory to run?
Mine works, but I have a few issues. The physical keyboard doesn't work correctly (when I type, I get multiple non-english characters entered, but the on-screen keyboard is fine). The keyboard on my previous Tilt (original) worked fine with TT6. It also appears that there's no GPS: it shows reception of 0 satellites, yet it works fine. Seems way to accurate to be getting position from cell phone triangulation. Also, I'm using the "black VGA" map, but there appears to be an issue with POIs. Gas stations were shown on screen in completely undeveloped areas. Fortunately, I wasn't looking for gas.
TT7 (V7.915) working OK on my stock UK Vodafone (WM6.1) TP2 with no major lag or loss of any other features. Gets a lock fairly quickly (10-30 seconds).
Custom POIs are accurate and as expected.
Satellite reporting is behaving itself.
Hardware keyboard: Worked fine first go, then started printing double/foreign characters (eg: A gave A+A(Umlaut)), then back to OK after I went into soft keyboard settings and re-selected English. Exited TT, came back in and hardware keyboard seems OK still.
The only major issue I have is that TT sometimes crashes while loading ("We're sorry..." Windows error screen) and I have to turn the phone off/on to get TT going again.
Edit: