Hi all,
I have an XDA Orbit on O2 which I got last week.
I have TomTom installed on the phone with the maps and voices etc on the MiniSD Card.
I went to use TomTom today, and it showed be the EULA and said No Maps available. I checked the SD Card, and I could access it and launch other applications which are installed on the SD Card.
I soft-reset the device, but still no fix.
Re-installed TomTom, and when it launched after installation it ran fine, however when I shut it down and opened it again i failed and showed No Maps once again.
I read http://forum.xda-developers.com/showthread.php?t=285511&page=1&highlight=Storage+Card thread, and installed the HTC Patch incase this was affecting me, however there is no change.
It seems that I can run TomTom if I re-install everytime I want to use it, however that obviously is no use at all.
Any help would be grately appreachiated, as I'm a little annoyed by this being that I have only had the phone for a week.
have you tried putting the maps on the device storage rather than your SD Card? some applications dont like being split over device and SD.
I have TTN6, and have the maps on the device under 'Program Files/Navigator/Zip/'
Hope this helps.
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Is the name of the TT-map map correct on minisd?
Check spelling.
richard_j_green said:
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Click to expand...
Click to collapse
..same issue
I had the same challenge.
There are one or 2 ways to resolve the issue.
1. Delete the maps, un-install TomTom software, you also need a reedit software to delete all references to TomTom in the regostry. Delete all other TomTom relevant files on the device /Program Files/navigator; /My Document/TomTom. Then soft-reset before installing all over again.
This I did for a friend.
2. In my own case, I reflashed with a new ROM, then installed all over again.
However, my friend had a cracked version, and I told him to go pay for the original, as you only need to pay for the maps these days. I cannot guarrantee 1. will always work.
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Just to clarify the technical points:
I am running the O2 WM6 ROM that was pre-installed on the device, and am using a SanDisk 2GB MiniSD card.
I don't see your TT version
What is your tt ver?
richard_j_green said:
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Click to expand...
Click to collapse
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
You have TT6
But was yout tt's version before??
richard_j_green said:
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
Click to expand...
Click to collapse
I'm using the same version now as previously on WM5 - Is that my issue?
I don't have the Mini S with me now, so I can't fire the software up right now, however I will look tonight and post the version, unless someone can tell me a way to find it some other way in the mean time?
Thanks
i dont think u can find the version number, apart from when u are running the program... just had a quick look on mine, and there aren't any files that look useful.
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Just open TomTom and press where the signal strength is shown, it will show at the bottom right, at least in version 6.030.
I hope you know that map's from TT5 are not compatible in TT6
richard_j_green said:
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Click to expand...
Click to collapse
Hiya mate i used to have this problem too
1. Make sure u dont have bluetooth explorer switched on
2. soft reset your device see if that works
Hi all,
I knew I wasn't being stupid trying to find the version number, so I've taken a picture of the GPS Signal screen - Attached.
I disbled Bluetooth Explorer and this is now working again perfectly, without changing the maps - These maps I have used on WM5 and WM6.
I personally don't see why Bluetooth Explorer would do this, unless TomTom is foolithly trying to look for maps over Bluetooth, but thanks for the help everyone.
to find the version number with TTN6:
-Start TomTom
-Tap on the bottom right of the screen where it shows time/speed/signal strength
-it should bring up a screen which shows your last route, signal on the right and bottom right of the screen the version, which you can tap on and get a detailed view.
Hope this helps.
I also have the same problem, where it says no maps found. It used to work and then all of a sudden it stopped. It is not a cracked version.
Can someone please help me!
Thank You
did you try the soultion in reply 16? it worked for me
Related
Hi!
In my Artemis is annoying problem. Navigator 6.03 stops opening, when "the hands" are on the display. This happens about three to four times a week.
I have to make a soft reset after that. (I use TomTom daily.)
The second symptom, which probably comes from above, is that I can not make a phone call. All things seem to be OK, but I can not receive or make a phone call. (I give pin -code and the phone shows good fieldstrength.)
I have Vanilla 1.0 in my phone.
Please, help me. This is the only problem, what I have with Vanilla 1.0
"PS. I think I found the reason. See below!"
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Motero73 said:
I had a similar problem a couple of weeks ago (I'm using vanilla 2.01), but it was not once a day, but everytime I tried to use it.
I solved it taking the TomTom files from a backup that I had from my microSD, and overwriting the ones that I had at that moment.
Since then no problems whatsoever.
Hope it helps.
Click to expand...
Click to collapse
Did you make a backup copy of all in microSD, formatted the microSD and put all back?
I just copied the files from the microSD backup that had to do with TomTom (f.e. Program Files/Navigator), and put them into my microSD overwriting the ones that I had at that moment.
It seems that some file was corrupted, and making this solved the problem.
Get update from myTomTom
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
chribo28 said:
Hi,
there is an official update specifically for the Artemis / P3300. If I'm right it is version 6.2. The freeze of earlier versions is a known issue. Get yourself an account on mytomtom.com and look for updates. You will find version 6.2 there.
Click to expand...
Click to collapse
Hi!
I cannot find any other than 6.03 -version. Could you send me Internet site address.
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
nm8 said:
Hi
I am using B&B 4.3 and Tomtom 6.030 bulid 8230 without any problem.
Try disabling POIs from Tomtom and observe if it still crashes. If it crashes or not, you need to update to 6.030. You can download it from tomtom website.
Click to expand...
Click to collapse
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Matti23 said:
Thank you, that will be the cause. I removed TomTom and loaded it again. Let´s see, if it freezes again. It has not done it in three days.
Click to expand...
Click to collapse
The phone was shut down during the night. I opened it and started TomTom. All went OK. I shut TomTom and wrote sms -message. The writing was quite sticky. Artemis did not send the message, because it was jammed.
I took away all POIs and loaded the map again.
I hope this solved the problem.
Matti23 said:
I took away all POIs and loaded the map again.
I hope this solved the problem.
Click to expand...
Click to collapse
You dont need to delete POIs. Just disable them from displaying when youre running Tomtom.
Change Preferernces > Enable/Disable POIs
then untick everything.
TomTom used to crash on a regular basis on my Artemis because I had it overclocked to 286MHz and when it was plugged in to the car charger the battery was getting very hot so it would freeze then reset after 5 minutes or so. Very annoying but I now have to restore the original clock speed each time I use TomTom, this may well be the issue you're having?
Change your SD... I had freezing problem with SD and microSD on both 9100 and P3300. After using new hight quality cards, no more problem.
Probly I found the reason
I think I found the reason for my problem, when TomTom freezed, when loading it.
I had enAlarmPPC v.3.3.1 -program, which caused that. I removed the program, and I have had that problem any more.
Now every time, when I change the time, I got an error message: "Cannot execute\Storage card\Program files\enAlarmPPC3.3.1\enAlarmPPC.exe"
I can not get rid of that message. I have souhgt it in the registry, but there are no mention of that.
Does anybody know this problem?
PS. I got a little program, which took away that error message. I could find it here: http://www.maik-wiege.de/en/FAQ/enalarmppc/uninstall.html
I've had just the same problem with Tomtom and had to keep restarting my PDA to get Tomtom working again.
Then I realised that whenever it ist stuck with the "hands" in the bottom corner but won't display tomtom screen, there is a "notification" waiting to be displayed.
Once you've tapped on the "Notification" text at the bottom left of the screen to clear all the notifications, then Tomtom will display itself again - without rebooting the PDA....
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
DassaultMirage said:
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
Click to expand...
Click to collapse
try com 4, rate 9600.
Forgive me if I understood your problem wrongly. While the HD has built-in GPS it is not supplied with any software or app associated with it for navigating or even for displaying coordinates or compass navigation.
Once you download the Google Maps (which also supports, for some countries the street map display) application onto your device, it will make use of the GPS and show you your position, with moving map display as you drive, quite smoothly and accurately. It will also show your approximate position indoors without GPS (using A-GPS and the cell site ID supporting LBS).
For point to point navigation and voice prompts guess one has to use 3rd party app like Garmin XT, TomTom; but I have not used these.
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
yes but in the software or in the hardware field?
You need to state what software you are using. If its Google maps just let Windows manage the GPS.
Why doesn't the GPS Photo work. It says that GPS is not active or something. What's up with that?
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
Thank you, but it doesn't work so!!! What's wrong???
I had the same problem, no one can't help me. Any gps software I used couldn`t find gps reciver, I've tried any combinations with COM ports....nothing. After 1 month and about 10 gps software I removed SIM card....and BINGO!!!! My old SIM card generate problem that nothing can find built-in gps reciver in my Touch HD. Try without SIM card and if it works go to operator and replace to new SIM card
Endow
Not at all
Sorry about this, but your tips does'nt help me:
I removed the SIMcard but the GPS in GOOGLEMAP didn't work anyway!
I tried to let it be managed by windows and to set it on COM4 with 9600bauds but no options succeded!
I can't understand what's wrong!!!
Another thing
Furthermore, when I set up the GPS-params in the params-application of windows mobile 6, the hard port (COM4) I chose isn't recorded by the software!!!
Maybe it's a hint for the answer?
Help me, geeks of HTC!
go to google and download the lastest ver. google map.
try to go to a window or a open space and turn on the google map. press option and try to click use gps , and see any reading on the top right of the map screen.
dont need to adjust any com 4,5,6 things.
once you got a lock on gps. you can close the google map and start to look out for third party nav software. try it.
Mine works perfectly fast at
COM: 4
BAUD: 57600
Im using iGuidance 2009
does ur phone need to go online when activating the gps? my car's gps doesnt need online yet the device can detect its location. however when i use google map, the phone just went online and try to search for my location. not too ideal as i have to pay for every kb sent/recieved.
Ooo
Maybe I will try to refresh the GPRSSettings with the soft designed for it!
I will reply when I'll know further about it...
Mine shows correct location when I set port - Com4 and BAUD: 57600 on Google maps for just a second. Then it jumps to some other continent and says GPS not available and shows the help dialog. Allowing windows to manage gps also gives same results what am i doing wrong?? or is it a limitation of blackstone/google maps app..
Reply
I've tryed what you done but it didn't succeded!
In the GMaps List I see: "COM4:" and there is nothing after the ":" !
When I confirm this update, the soft tell me that he can't found a device on this COM!!!
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Reply
I'm not sure to understand you because I come from Switzerland and I main speek French.
YOu think that it is a ROM version's problem? Which one should I install? (and how to do it ?)
Thanks so much!
P.S.: I don't have changed any ROM or Radio Version in this HTC Touch HD!
I have never fiddled with ROM but I have same issue. google maps jumps continent!! momentarily despite 7 satellites. May be an issue with Google maps itself??
timmymarsh said:
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
timmymarsh said:
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
I have the same problem. I have already donwloaded the 1.56 rom and the uspl but cant seem to decide to flash or not.
Hello Guys,
I manage to upgrade Vogue to WM6.1 + GPS.
When I run Google Maps it work fine. Show me exactly where I am.
When I run TomTom from AstroGPSLauncher, the TomTom showed me that it found 7 satellites.
But I do NOT see the road.
When I try to enter direction I get an error message related to the GPS data.
It is as if the GPS data is wrong. I think TomTom try to put me in a different part of the world and its completely confused.
Any Idea what I did wrong?
Thanks.
pozo said:
Hello Guys,
Any Idea what I did wrong?
Thanks.
Click to expand...
Click to collapse
You forgot to tell us what version of TT and what map you are using!
It's unlikely to be a hardware or rom problem otherwise Google Maps would not work.
-GT
I'm using version 7.45 .
Today I also installed it on my friends phone (HTC Touch Sprint) and it was working OK.
So the TomTom version is OK, the Vogue work OK with GoogleMaps and MS Live.
What can be the reason that TomTom GPS is confused on my machine?
I also installed GPS Tuner and I saw the same problem:
The location jump all the time. Sometimes it put in in China...
Very strange....
Can someone think about something I did wrong???
Hi,
I signed up a touch HD with orange UK yesterday. The first thing I did was to install TOMTOM on the machine. However, TOMTOM kept reporting no GPS device. If it finds the internal GPS receiver, then it is 20 minutes later. One thing I notice is that when TOMTOM is looking for the GPS receiver, there is something trying to connect to the internet.
I am sure I did everthing right as I was using this copy of tomtom on the touch diamond and it worked like a treat.
Did orange do anything to the GPS so people can only use their stupid orange map? If they did, is there any way that I can get the tomtom working?
Many thanks in advance.
Thank you for all your advice and the problem has been solved. Here are a few tips for people who have the same problem.
1. A-GPS can only make things worse, switch it off.
2. Update your quick-GPS data.
3. It seems that tomtom struggles to find GPS device on certain orange handset. If you are the unlucky one, try change your hand set with orange. If you don’t want to go through the trouble, open google map to locate satellite before open tomtom.
4. Debrand the handset.
5. Orange’s customer service is crap, stay away if you can
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
mijyou said:
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
Thanks, I have updated the quickGPS the first thing. I have the a-gps enabled, though it could help to locate the satallite.
I think it is recomended to be disabled.
Perhaps try it if you have not.
GPS always worked fine for me with the stock Orange ROM, that was with 1.14 though, I think they come with 1.19 now, it also works fine with all of the cooked ROMs I've tested. Perhaps the version of TomTom you have isn't fully compatible with the HD (I did notice you said it worked on the Diamond, but perhaps there's a hardware/software difference on the HD which stops it working.
mijyou said:
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
that was the most important one
I am happily have 3 navigation programs on my HD, Tomtom, iGO, Navigon
but I always prefer iGO
Hi Guys, Thank you for your reply.
For you who is using tomtom, which version are you using? I am using 7.48
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
mmp7 said:
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
Click to expand...
Click to collapse
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
MrKaon said:
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
Click to expand...
Click to collapse
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
spud_work said:
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
Click to expand...
Click to collapse
may I ask what version of tomtom are you using?
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
spud_work said:
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
Click to expand...
Click to collapse
thanks for telling me.
ok now for everyone which already had tomtom without 7 digit postcode, do as I listed here:
01- Downloaded the file
www.tomtom.com/updates/great_britainpostal_all.zip
02- copy it into new folder (folder's name doesn't matter)
03- extract it.
04- click on setup.exe
05- choose "i agree" then click next.
06- choose Pocket PC (Windows CE)
07- choose install Tom Tom Great Britin Postcode then click next.
08- choose other location (Advanced)
09- choose Folder on the computer
10- select any folder you want
the software will generate a zip folder
after getting the zip folder move it to your SD card's Root
start TOM TOM you will be able to do a full 7 digit postcode search.
dead link
link not working for me?
can some one try it and report working or not
thanks
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
leggoman said:
link not working for me?
can some one try it and report working or not
thanks
Click to expand...
Click to collapse
oops my mistake try it again should be work now
djmc321 said:
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
it shouldn't be like that, when I had Stock ROM on my HD I used to had similar problem beside long waiting time before tomtom finds signal (about 15 ~ 20s) but after flashing HD with Custom ROM every problem is gone, now it finds signal in less than 5 second
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
Exactly what I was going to say.. I had the same problem with mine running 7.9something. If you run google maps in the backgroungd it almost jump started the gps. I have also found that once you get a gps signal it seems to keep it easier..... dunno if thats just hopeful. Oh yes and I am on Orange too stock rom.
Hi, I see some threads that suggest TomTom 7 can be installed on a Touch Pro 2. I bought TomTom 7 on micro SD and it won't run. I get a message "Your device is not compatible with this version of TomTom NAVIGATOR!" Is there something simple that I am missing that is causing this. TomTom support were no help.
Offtopic: Why not ask your question in one of the threads you have found
Ontopic: Officially the TP2 is not supported at this moment. It will work, just ask Google
Hi PGLion.
I started a new thread because none of the other threads were actually about TomTom7 on the TP2, they just gave me hope!
On the ask Google suggestion, I may be a bit slow, but I have not found anything that helps me. If you have a link that you think will help, I'd be very grateful if you could post it.
TT7 on TP2
Hi,
Has anyone got TT7 working on TP2 yet? I've checked on google can't find a copy
Thanks.
simple1i said:
Hi,
Has anyone got TT7 working on TP2 yet?
Click to expand...
Click to collapse
yes,
try >"7.910" "(9196)"< as search terms in google.
before installing that version you should also chek the reports of other users stating that after installation bluetooth stopped working.
You want "ttn7.915.9196.vga_black.cab"
Works fine.
In fact a quick google takes us to this very site:
http://forum.xda-developers.com/showthread.php?t=482075
Bluetooth still working fine for me.
Yes, TomTom7 DOES work on TouchPro2. I use it almost daily. It's very nice.
But it DOES cripple bluetooth (at least the build that I'm using). It replaces a couple of bluetooth drivers in your Windows directory that are incompatable (or so it appears).
If anyone's having issues with this, PM me. I'll find the thread (I think it was at PPCGeeks) that has instructions re: fixing it.
Trevor_g said:
Yes, TomTom7 DOES work on TouchPro2. I use it almost daily. It's very nice.
But it DOES cripple bluetooth (at least the build that I'm using). It replaces a couple of bluetooth drivers in your Windows directory that are incompatable (or so it appears).
If anyone's having issues with this, PM me. I'll find the thread (I think it was at PPCGeeks) that has instructions re: fixing it.
Click to expand...
Click to collapse
To save looking - you will need to rename or delete the following dll files in the \windows directory:
\windows\BtSdkCE30.dll
\windows\BtCorelf.dll
Tomtom 7 on TP2
paraicbegley said:
Hi, I see some threads that suggest TomTom 7 can be installed on a Touch Pro 2. I bought TomTom 7 on micro SD and it won't run. I get a message "Your device is not compatible with this version of TomTom NAVIGATOR!" Is there something simple that I am missing that is causing this. TomTom support were no help.
Click to expand...
Click to collapse
i too can confirm that TT7 works on TP2, might be best you use a software called cabinstl to install the cab file to your required location
The biggest problem I'm having is some serious GPS lag on my Verizon Touch Pro2 running TomTom (I've tried v6 and v7).
TOMTOM 7 install issues on Tilt 2
Has anyone had problems with the install going automatically to the device and not having enough memory to run?
Mine works, but I have a few issues. The physical keyboard doesn't work correctly (when I type, I get multiple non-english characters entered, but the on-screen keyboard is fine). The keyboard on my previous Tilt (original) worked fine with TT6. It also appears that there's no GPS: it shows reception of 0 satellites, yet it works fine. Seems way to accurate to be getting position from cell phone triangulation. Also, I'm using the "black VGA" map, but there appears to be an issue with POIs. Gas stations were shown on screen in completely undeveloped areas. Fortunately, I wasn't looking for gas.
TT7 (V7.915) working OK on my stock UK Vodafone (WM6.1) TP2 with no major lag or loss of any other features. Gets a lock fairly quickly (10-30 seconds).
Custom POIs are accurate and as expected.
Satellite reporting is behaving itself.
Hardware keyboard: Worked fine first go, then started printing double/foreign characters (eg: A gave A+A(Umlaut)), then back to OK after I went into soft keyboard settings and re-selected English. Exited TT, came back in and hardware keyboard seems OK still.
The only major issue I have is that TT sometimes crashes while loading ("We're sorry..." Windows error screen) and I have to turn the phone off/on to get TT going again.
Edit: