Orange touch HD + tomtom= no GPS device? - Touch HD Themes and Apps

Hi,
I signed up a touch HD with orange UK yesterday. The first thing I did was to install TOMTOM on the machine. However, TOMTOM kept reporting no GPS device. If it finds the internal GPS receiver, then it is 20 minutes later. One thing I notice is that when TOMTOM is looking for the GPS receiver, there is something trying to connect to the internet.
I am sure I did everthing right as I was using this copy of tomtom on the touch diamond and it worked like a treat.
Did orange do anything to the GPS so people can only use their stupid orange map? If they did, is there any way that I can get the tomtom working?
Many thanks in advance.
Thank you for all your advice and the problem has been solved. Here are a few tips for people who have the same problem.
1. A-GPS can only make things worse, switch it off.
2. Update your quick-GPS data.
3. It seems that tomtom struggles to find GPS device on certain orange handset. If you are the unlucky one, try change your hand set with orange. If you don’t want to go through the trouble, open google map to locate satellite before open tomtom.
4. Debrand the handset.
5. Orange’s customer service is crap, stay away if you can

Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.

mijyou said:
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
Thanks, I have updated the quickGPS the first thing. I have the a-gps enabled, though it could help to locate the satallite.

I think it is recomended to be disabled.
Perhaps try it if you have not.

GPS always worked fine for me with the stock Orange ROM, that was with 1.14 though, I think they come with 1.19 now, it also works fine with all of the cooked ROMs I've tested. Perhaps the version of TomTom you have isn't fully compatible with the HD (I did notice you said it worked on the Diamond, but perhaps there's a hardware/software difference on the HD which stops it working.

mijyou said:
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
that was the most important one
I am happily have 3 navigation programs on my HD, Tomtom, iGO, Navigon
but I always prefer iGO

Hi Guys, Thank you for your reply.
For you who is using tomtom, which version are you using? I am using 7.48

Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.

mmp7 said:
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
Click to expand...
Click to collapse
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.

MrKaon said:
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
Click to expand...
Click to collapse
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.

spud_work said:
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
Click to expand...
Click to collapse
may I ask what version of tomtom are you using?

7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder

spud_work said:
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
Click to expand...
Click to collapse
thanks for telling me.
ok now for everyone which already had tomtom without 7 digit postcode, do as I listed here:
01- Downloaded the file
www.tomtom.com/updates/great_britainpostal_all.zip
02- copy it into new folder (folder's name doesn't matter)
03- extract it.
04- click on setup.exe
05- choose "i agree" then click next.
06- choose Pocket PC (Windows CE)
07- choose install Tom Tom Great Britin Postcode then click next.
08- choose other location (Advanced)
09- choose Folder on the computer
10- select any folder you want
the software will generate a zip folder
after getting the zip folder move it to your SD card's Root
start TOM TOM you will be able to do a full 7 digit postcode search.

dead link
link not working for me?
can some one try it and report working or not
thanks

I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...

leggoman said:
link not working for me?
can some one try it and report working or not
thanks
Click to expand...
Click to collapse
oops my mistake try it again should be work now
djmc321 said:
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
it shouldn't be like that, when I had Stock ROM on my HD I used to had similar problem beside long waiting time before tomtom finds signal (about 15 ~ 20s) but after flashing HD with Custom ROM every problem is gone, now it finds signal in less than 5 second

I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
Exactly what I was going to say.. I had the same problem with mine running 7.9something. If you run google maps in the backgroungd it almost jump started the gps. I have also found that once you get a gps signal it seems to keep it easier..... dunno if thats just hopeful. Oh yes and I am on Orange too stock rom.

Related

TomTom5

Chaps/Ladies (do we have any?!),
I've been using TT5 for a couple of weeks now, and have a strange problem! Every now and then, randomly, TT5 will just exit whilst navigating. I drove 170 miles yesterday and it closed itself four times, the phone was off on three of the four occasions, as was wifi and BT.
I've also had it freeze once or twice. The display just stops updating, though I can still tap the screen and exit cleanly. This used to happen more frequently with TT3.
I've only run TT5 on the new 1.40 ROM.
Anyone else suffering?
TIA
Dan
I have the same problem. Also running 1.40, tomtom sometimes just exists
d3vil said:
I have the same problem. Also running 1.40, tomtom sometimes just exists
Click to expand...
Click to collapse
Argh! Another quirk. I think I'm gonna sell my XDA2s on Ebay, and buy a map, a diary, and a Nokia 1110. :lol:
I use TT5 daily & have never had a problem with it exiting. The display occasionally freezes, butI think I can put this down to when the traffic info is being updated because it only happens occasionally & it unfreezes after about 30 seconds or so
weasel said:
I use TT5 daily & have never had a problem with it exiting. The display occasionally freezes, butI think I can put this down to when the traffic info is being updated because it only happens occasionally & it unfreezes after about 30 seconds or so
Click to expand...
Click to collapse
Are you on the same ROM as us, 1.40? I don't use TomTom Traffic, so that can't be related to my problem.
Thanks for replying
Dan
Off topic
I have a question and it's off topic (sorry guys) Can you use TomTom 5 for just driving directions? Do you need to have the GPS unit?
Are you on the same ROM as us, 1.40? I don't use TomTom Traffic, so that can't be related to my problem.
Click to expand...
Click to collapse
I'm on a "standard" O2 UK ROM
ROM 1.31.00 WWE dated 13 December 2004
Radio 1.06
ExtROM 1.31.139 WWE
I have a question and it's off topic (sorry guys) Can you use TomTom 5 for just driving directions? Do you need to have the GPS unit?
Click to expand...
Click to collapse
My experience is that TomTom 5 will not start calculating a route without a valid GPS device attached - I'm just going to verify that though
I have a question and it's off topic (sorry guys) Can you use TomTom 5 for just driving directions? Do you need to have the GPS unit?
Click to expand...
Click to collapse
Well that shows how much I know about TomTom 5 . It is definitely possible to generate driving instructions without a GPS device attached 8) .
Go into the "Advanced Planning" option and simply pick your start and end points. You will then have a route that you can display as text, images etc, or even "demo" the route i.e. simulate it at speeds from 10% to 500% of "real time"
to: efcmandan
I had same problem. Try to switch off showing a POI. I switch it off and TT5 works fine.
Re: to: efcmandan
Panther16 said:
I had same problem. Try to switch off showing a POI. I switch it off and TT5 works fine.
Click to expand...
Click to collapse
Ah right Which POI? Or just all POI's?
Thanks
Dan
I switch off all POI.
Thank you.
Thanks Weasel. I'll go ahead and load TomTom5 before my GPS arrives.
I have an XDA IIs with TT3, after i first installed it noticed it would crash randomly, which became really really annoying. After messing around with settings and 3rd-party software, i got nowhere. So I removed the **** O2 software that comes with the IIs, low and behold no more crashing.
Is this also the case for TT5, I would like to know before upgrading?
Don't really want to have to turn off the POI's to make it work.
This is all pretty interesting. I'm running a 1.40 O2 ROM and TomTom is not-as-stable-as-it-could-be. I'm going to do some more qualitative analysis to try and work out which of the crappy O2 software is the culprit - or if it's TomTom itself.
We've got quite a few XDAIIs here and both of the ones with TomTom are flakey. More details to follow...
[edit] Should have said - this is TomTom Navigator 5, with both bluetooth and wired GPS receivers.
AFAIK, the O2 Active software produces a memory leak. There are suggestions that TTN5 also produces a memory leak on 640x480 VGA devices. Perhaps the two are interacting? (Yes I know the XDA2s isn't VGA). Try monitoring available RAM while TTN5 is running. If it constantly reduces it will reach a point where the s/w crashes.
Where are we?
@ all:
Anyone know a solution to this problem? Apparently we need to use the POI.dat file from earlier installations, i.e. 4 or 3 and it will only crash 1% of the time. Until there is a patch for this we will have to settle for this solution it seems.
BTW, does anyone happen to have the POI.dat file for the Benelux map, version 3 or 4? I seem to have "misplaced" my cd with the map on it, anyone can help a brutha out? PM me?
Cheers in advance!
I've switched off POI ( that's NP for dutch users ) so it's stable now.
Any word on the arrival of a patch for this problem?
poi.dat
resolved poi.
ftp://ftp.xda-developers.com/Uploads/Blueangel/TomTom5/poi.dat
FTP link does not work
Can you provide me with the above link that works please?

HTC P3300 GPS port????

hi can any one tell me which port the gps is on ,,i removed tom tom BC it dosen't have maps for the place im in ,,i want to use navigon 5 but when i put auto detect it can't fine it i tryed manul,, but didnt work,, any help plzzz...thx
GPS port is set to COM4 by default.
I hope that this helps.
I can get iGuidance 3.0 to recognize it on COM 4 with the automatic GPS management turned on... HOWEVER, the GPS positions are not recieved and it cannot get a fix.
Tom Tom works okay, but I'd rather use iGuidance.
Adam, when in TT tap the sat strength meter, when the unit is displaying the sat strength/ status page is it giving the individual sat numbers and signal strength? I apreciate this app is working I just want an answer to that question before trying the next idea - Mike
mikealder said:
Adam, when in TT tap the sat strength meter, when the unit is displaying the sat strength/ status page is it giving the individual sat numbers and signal strength? I apreciate this app is working I just want an answer to that question before trying the next idea - Mike
Click to expand...
Click to collapse
Yes, the GPS Status page in the included TomTom software does show the sat numbers/signal strength in addition to their relative location.
When starting TomTom at first it says "No GPS detected" then after a couple seconds it says "Waiting for a valid GPS signal.." I'm not sure if that means there's something hard coded into this TomTom versions that actually turns the GPS receiver on.
What's your next idea?
I live in Colorado and received my P3300 yesterday. I can't seem to download my free map for some reason. When I get into PIE from the TomTom app, and select the state and press Next I get the following error message pop up:
“The page you are looking for cannot be found due to unknown error 0x80072f78.”
Anyone have any idea why this would be happening? I love this device outside of this issue.
SecureGSM said:
GPS port is set to COM4 by default.
I hope that this helps.
Click to expand...
Click to collapse
thx sort it out ,,,from settings /system /GPS/ the program tab com4 and the hardware tap None"no COM" and it works fine
X-MAN said:
thx sort it out ,,,from settings /system /GPS/ the program tab com4 and the hardware tap None"no COM" and it works fine
Click to expand...
Click to collapse
Not for iGuidance v3.0 it doesn't work. What program did you get it to work with?
I live in Colorado and received my P3300 yesterday. I can't seem to download my free map for some reason. When I get into PIE from the TomTom app, and select the state and press Next I get the following error message pop up:
“The page you are looking for cannot be found due to unknown error 0x80072f78.”
Anyone have any idea why this would be happening? I love this device outside of this issue.
Click to expand...
Click to collapse
That happened to me with the New York maps, but then I tried again an hour or so later, and it worked.
adamz said:
Not for iGuidance v3.0 it doesn't work. What program did you get it to work with?
That happened to me with the New York maps, but then I tried again an hour or so later, and it worked.
Click to expand...
Click to collapse
i'm using 4 programs navigon5,gps dash, navio,vito navigator, astro navigator, and all on COM4 and all work fine based on the above configration,,,
adamz said:
That happened to me with the New York maps, but then I tried again an hour or so later, and it worked.
Click to expand...
Click to collapse
I wish I could get it to work; I've tried countless times in the past 48 hours with no luck when choosing any state in the US. Same error message.
I am running Navigon 5 with success, but the app is slow overall. Anyone get Mapopolis to run on this device? I tried yesterday with COM 4; it was trying hard to get a fix, but it wouldn't go for me with the latest version.
Btw,
Do ya guys know if MapKing will work on the device?
I'm kinda new to GPS, and wondering how in-built GPS systems will work with any softwares. Thanks
I've tried the TomTom software and it works well with this device. Microsoft pocket streets worked, but didnt seem to work well. Going to try Iguidance and see if that is any good.
gps
Has anyone gotten this to work with Iguidance 3.0, for some reason iguidance will not work with the artemis gps. If you have it working, what did you have to do to get it to work?
HTC P3300 GPS port
I had a O2 orbit xba and I loaded the Navigator 5 but having problem detecting GPS receiver...can anyone help?? I set the GPS to COM4 but still cannot work. What is the setting for GPS for Navigator 5?
I know on my HTC P3300, I have troubles getting a signal so I am came to the conclusion that I am going to need an external antenna because the built in one isn't that great.
NutritionN said:
I live in Colorado and received my P3300 yesterday. I can't seem to download my free map for some reason. When I get into PIE from the TomTom app, and select the state and press Next I get the following error message pop up:
“The page you are looking for cannot be found due to unknown error 0x80072f78.”
Anyone have any idea why this would be happening? I love this device outside of this issue.
Click to expand...
Click to collapse
The solution to this program is as follows:
Run regedit in your HOST computer and navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services, Add a DWORD setting "AllowLSP" with value set to 0
NutritionN said:
I live in Colorado and received my P3300 yesterday. I can't seem to download my free map for some reason. When I get into PIE from the TomTom app, and select the state and press Next I get the following error message pop up:
“The page you are looking for cannot be found due to unknown error 0x80072f78.”
Anyone have any idea why this would be happening? I love this device outside of this issue.
Click to expand...
Click to collapse
You have to be connected to internet before you start TT and download free maps... fastest way is thru WiFi. You can also use activesync to get connected to internet.

No Maps Available in TomTom on WM6

Hi all,
I have an XDA Orbit on O2 which I got last week.
I have TomTom installed on the phone with the maps and voices etc on the MiniSD Card.
I went to use TomTom today, and it showed be the EULA and said No Maps available. I checked the SD Card, and I could access it and launch other applications which are installed on the SD Card.
I soft-reset the device, but still no fix.
Re-installed TomTom, and when it launched after installation it ran fine, however when I shut it down and opened it again i failed and showed No Maps once again.
I read http://forum.xda-developers.com/showthread.php?t=285511&page=1&highlight=Storage+Card thread, and installed the HTC Patch incase this was affecting me, however there is no change.
It seems that I can run TomTom if I re-install everytime I want to use it, however that obviously is no use at all.
Any help would be grately appreachiated, as I'm a little annoyed by this being that I have only had the phone for a week.
have you tried putting the maps on the device storage rather than your SD Card? some applications dont like being split over device and SD.
I have TTN6, and have the maps on the device under 'Program Files/Navigator/Zip/'
Hope this helps.
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Is the name of the TT-map map correct on minisd?
Check spelling.
richard_j_green said:
I had TomTom installed in this way on my XDA Mini S for 18 months with no problems, and as far as I am aware this is the way TomTom is designed to be installed.
Click to expand...
Click to collapse
..same issue
I had the same challenge.
There are one or 2 ways to resolve the issue.
1. Delete the maps, un-install TomTom software, you also need a reedit software to delete all references to TomTom in the regostry. Delete all other TomTom relevant files on the device /Program Files/navigator; /My Document/TomTom. Then soft-reset before installing all over again.
This I did for a friend.
2. In my own case, I reflashed with a new ROM, then installed all over again.
However, my friend had a cracked version, and I told him to go pay for the original, as you only need to pay for the maps these days. I cannot guarrantee 1. will always work.
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Just to clarify the technical points:
I am running the O2 WM6 ROM that was pre-installed on the device, and am using a SanDisk 2GB MiniSD card.
I don't see your TT version
What is your tt ver?
richard_j_green said:
I am currently using a cracked version also (tut-tut) but am getting the Western Europe edition for christmas from my other half.
The maps folder is named Great_Britain which worked on my Mini S on WM5 no problems.
Can you please advise where the TTN registry keys are, as I looked in HKCU and HKLM but couldn't find anything relating to TomTom. I did not remove all the existing stuff before re-installing so I may try this.
Click to expand...
Click to collapse
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
You have TT6
But was yout tt's version before??
richard_j_green said:
Can anyone tell me how I can find out my TTN software version being that I cannot get into the application itself, as I am stuck at the screen showing the No Maps message.
Is the version displayed inside a file or registry key used by TTN?
Click to expand...
Click to collapse
I'm using the same version now as previously on WM5 - Is that my issue?
I don't have the Mini S with me now, so I can't fire the software up right now, however I will look tonight and post the version, unless someone can tell me a way to find it some other way in the mean time?
Thanks
i dont think u can find the version number, apart from when u are running the program... just had a quick look on mine, and there aren't any files that look useful.
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Just open TomTom and press where the signal strength is shown, it will show at the bottom right, at least in version 6.030.
I hope you know that map's from TT5 are not compatible in TT6
richard_j_green said:
I'm having problems locating the software build version.
I've started TomTom on my Mini S which is working perfectly and loading the maps ok etc etc, however I can't see anything with the build or software number on it - Sorry for being a noob, but could someone point me in the right direction.
Many Thanks
Click to expand...
Click to collapse
Hiya mate i used to have this problem too
1. Make sure u dont have bluetooth explorer switched on
2. soft reset your device see if that works
Hi all,
I knew I wasn't being stupid trying to find the version number, so I've taken a picture of the GPS Signal screen - Attached.
I disbled Bluetooth Explorer and this is now working again perfectly, without changing the maps - These maps I have used on WM5 and WM6.
I personally don't see why Bluetooth Explorer would do this, unless TomTom is foolithly trying to look for maps over Bluetooth, but thanks for the help everyone.
to find the version number with TTN6:
-Start TomTom
-Tap on the bottom right of the screen where it shows time/speed/signal strength
-it should bring up a screen which shows your last route, signal on the right and bottom right of the screen the version, which you can tap on and get a detailed view.
Hope this helps.
I also have the same problem, where it says no maps found. It used to work and then all of a sudden it stopped. It is not a cracked version.
Can someone please help me!
Thank You
did you try the soultion in reply 16? it worked for me

How to set up the GPS

Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
DassaultMirage said:
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
Click to expand...
Click to collapse
try com 4, rate 9600.
Forgive me if I understood your problem wrongly. While the HD has built-in GPS it is not supplied with any software or app associated with it for navigating or even for displaying coordinates or compass navigation.
Once you download the Google Maps (which also supports, for some countries the street map display) application onto your device, it will make use of the GPS and show you your position, with moving map display as you drive, quite smoothly and accurately. It will also show your approximate position indoors without GPS (using A-GPS and the cell site ID supporting LBS).
For point to point navigation and voice prompts guess one has to use 3rd party app like Garmin XT, TomTom; but I have not used these.
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
yes but in the software or in the hardware field?
You need to state what software you are using. If its Google maps just let Windows manage the GPS.
Why doesn't the GPS Photo work. It says that GPS is not active or something. What's up with that?
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
Thank you, but it doesn't work so!!! What's wrong???
I had the same problem, no one can't help me. Any gps software I used couldn`t find gps reciver, I've tried any combinations with COM ports....nothing. After 1 month and about 10 gps software I removed SIM card....and BINGO!!!! My old SIM card generate problem that nothing can find built-in gps reciver in my Touch HD. Try without SIM card and if it works go to operator and replace to new SIM card
Endow
Not at all
Sorry about this, but your tips does'nt help me:
I removed the SIMcard but the GPS in GOOGLEMAP didn't work anyway!
I tried to let it be managed by windows and to set it on COM4 with 9600bauds but no options succeded!
I can't understand what's wrong!!!
Another thing
Furthermore, when I set up the GPS-params in the params-application of windows mobile 6, the hard port (COM4) I chose isn't recorded by the software!!!
Maybe it's a hint for the answer?
Help me, geeks of HTC!
go to google and download the lastest ver. google map.
try to go to a window or a open space and turn on the google map. press option and try to click use gps , and see any reading on the top right of the map screen.
dont need to adjust any com 4,5,6 things.
once you got a lock on gps. you can close the google map and start to look out for third party nav software. try it.
Mine works perfectly fast at
COM: 4
BAUD: 57600
Im using iGuidance 2009
does ur phone need to go online when activating the gps? my car's gps doesnt need online yet the device can detect its location. however when i use google map, the phone just went online and try to search for my location. not too ideal as i have to pay for every kb sent/recieved.
Ooo
Maybe I will try to refresh the GPRSSettings with the soft designed for it!
I will reply when I'll know further about it...
Mine shows correct location when I set port - Com4 and BAUD: 57600 on Google maps for just a second. Then it jumps to some other continent and says GPS not available and shows the help dialog. Allowing windows to manage gps also gives same results what am i doing wrong?? or is it a limitation of blackstone/google maps app..
Reply
I've tryed what you done but it didn't succeded!
In the GMaps List I see: "COM4:" and there is nothing after the ":" !
When I confirm this update, the soft tell me that he can't found a device on this COM!!!
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Reply
I'm not sure to understand you because I come from Switzerland and I main speek French.
YOu think that it is a ROM version's problem? Which one should I install? (and how to do it ?)
Thanks so much!
P.S.: I don't have changed any ROM or Radio Version in this HTC Touch HD!
I have never fiddled with ROM but I have same issue. google maps jumps continent!! momentarily despite 7 satellites. May be an issue with Google maps itself??
timmymarsh said:
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
timmymarsh said:
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
I have the same problem. I have already donwloaded the 1.56 rom and the uspl but cant seem to decide to flash or not.

TomTom GPS data stream problem

Hello Guys,
I manage to upgrade Vogue to WM6.1 + GPS.
When I run Google Maps it work fine. Show me exactly where I am.
When I run TomTom from AstroGPSLauncher, the TomTom showed me that it found 7 satellites.
But I do NOT see the road.
When I try to enter direction I get an error message related to the GPS data.
It is as if the GPS data is wrong. I think TomTom try to put me in a different part of the world and its completely confused.
Any Idea what I did wrong?
Thanks.
pozo said:
Hello Guys,
Any Idea what I did wrong?
Thanks.
Click to expand...
Click to collapse
You forgot to tell us what version of TT and what map you are using!
It's unlikely to be a hardware or rom problem otherwise Google Maps would not work.
-GT
I'm using version 7.45 .
Today I also installed it on my friends phone (HTC Touch Sprint) and it was working OK.
So the TomTom version is OK, the Vogue work OK with GoogleMaps and MS Live.
What can be the reason that TomTom GPS is confused on my machine?
I also installed GPS Tuner and I saw the same problem:
The location jump all the time. Sometimes it put in in China...
Very strange....
Can someone think about something I did wrong???

Categories

Resources