Develop Bugs

O2 RELEASE ROM UPGRADE FOR XDA2S

I have been sent a link from O2 Data Support for downloading the new XDA2s ROM upgrade, which apparently will fix the Bluetooth problems.
The link is...
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
Haven't done anything with it yet, but thought you guys might like to know...
regards,
Guy

Hmm I wonder if I can use this update on my O2 Xda2s.
I got it in Malasyia.
Noel

I installed it on my UK XDA 2s, I will report back later.

In the PDF it's saying that this version is only for devices sold by O² UK or O² Ireland... Not sure if I should give it a go on my version..
Noel

I think I might wait and see what others say about this before I install it myself. So many that have it already say it is great but then you hear others say it has caused problems.

That post is the launch rom, not an upgrade. LMAO It is intended for people who attempt to flash the XDA IIs with a different vendors rom and screw it up.
Mike

Nope, its not, click the link. O2 are obviously just too lazy to create a new page for a new rom!
Nigel

HAHA you are correct!!! LMAO oh well. :shock: :lol:

Hi..have installed the update..and have encountered several problems...was wondering if anyone could help me.
I hate the fact that the clock has disappeared from the top right so whe u are using applications its no longer visible. Is there any way of bring it back?
Also now when you click the o2 at the top it dosn't give the active connections anymore. Therefore whats the quickest way to disconnect the gprs? and is there any way of bringing that back to how it used to be?
I have also had to reset my phone more often that I had to before.
Was wondering if anyone had encountered the same problems and how to resolve them.
Thanks so much...

Bit the bullet and upgraded last night, wifi still works and as I use Corporate mode I don't get any issues with 02 active, icons or clocks. All seems normal, so far!

Have to agree with Dave. I finally bit the bullet and installed the update last night. Don't like the new O2 active and put the clock straight back with the registry key.
Other than the missing clock and poor O2 Active software which I never use anyway no real problems. Tom Tom still works fine with my Bluetooth GPS receiver. WIFI still works fine with WPA security and everything locked down on the access point.
Still receive SMS notification and its nice that you're not limited to 70 char when using ' in sms text messages now!
All ok.

har5ha:
Just get the old O2 active back. To to this, head to the xda-dev FTP site, find the old O2 XDA IIs extended rom, pull it, find the file install.ARM.CAB (O2 active)
Sync/backup yr stuff then hard reset the XDA IIs, and let it do its stuff. When leave it to install the extended rom, but be ready to soft reset it when you get asked the 'corporate/personal' question (you'll have to watch the screen since there is a timeout). Once it reboots, copy install.ARM.CAB to the machine, and execute it. It will soft reset yr device at the end.
I use 2 things from O2 active, the battery plugin and the O2 icon to kill connections. Shame billy did not think to include a disconnect dialogue as well really (he put on in for vpn).
There might be a way to install old over new, dunno. I tried and it locks loads of files (even if you prevent it from loading).
Nigel

thanks Nigel...I ended up installing gb soft for the disconnect button.
So its ok...still getting loads of crashing. I think am going to reinstall it and then use corporate mode..hopefully it will crash less!

can I get an update on xda iis rom update
Hi all, I'm still new to this whole thing but reading and researching all I can. Don't have an xda iis as of yet, but on the high streets waiting list. I like the phone and in one way, can't wait, but don't want problems when I get it, especially at the price. Can anyone on o2 that has purchased their phone from o2 let me know how you are getting on...problems...ect, before and after the update.? To be honest, I'm a bit afraid to bite the bullet and get one right now due to what I'm hearing...especially since I'm not very computer smart. I do understand that it depends a lot on the manufacturer of the phone but if I had problems like I'm hearing about it would really do my head in...(no patience). Thanks

Well I love my phone to bits...had issues with the update but now that I have hard reset it and put it corporate mode its not freezing anymore.
But you have to remember its a pocket pc...like a pc..will need to be reset every so often...I was resetting mine of average once a day. It just takes a minute.
There are some negative points..but the positive outweighs the negative I think. My old pda was palm os (clie) and this is windows which is really good! As well as the fact that it has a phone built in too!

Hi all.
Can you please post some more feedback on this rom.
How is the BT stability?
Range?
Crackling noise?
License Expired troubbles?
I know its Build 3500, but maybe something else in this rom makes a difference.
How about the problem with sound dissapering when you answer a call.
Any troubbles here? This is really a pain in the (_!_)

Running the New Rom for a couple of days now and it seems much better than the launch Rom, The O2 active stuff is just as pants as usual so remove that and the "Connections" exe from Windows\startup.
Best thing is that it's stopped the annoying bug of the GPRS settings being screwed up when you enable/disable Wi-Fi.
Recommend it myself

Password
Anybody knows the password for this rom

PDA2K Upgrade
Hi, Can this rom replace the i mate rom on the 2K.& If so will it then be sim locked to O2? as I want to use an O2 pay as you go, & T-mobile sim
many thanks in advance............

Anyone installed Black 3.0.1 on Vario II (T-Mobile)?

I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below

Here's the cab
Just drag to your Vario and run it.

chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.

yes, working fine here, all connection settings set manually.

bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records

chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)

I tend to install things like Reader that like a soft reset so it takes me a little longer.

sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?

MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.

It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,

The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin

TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.

vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.

vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.

ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings

Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn

Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.

Probelm with WiFi

Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.

I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.

HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!

Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.

and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?

utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1

Problem with Bluetooth after installing tomtom7

Hello,
I just installed Tomtom7 on my pro2. but now the bluetooth stack is broken.
On other websites they say that tomtom replaces BtCoreIf.dll and BtSdkCE30.dll I already removed them and soft reset, but that doesn't work.
Can someone with a Pro2 upload those 2 files so that i can replace them on my phone? That will be the fastest solution i think... Thanks!

When this happened to me I had to hard reset, then re-install TomTom without the BT files. I'm still not entirely clear what the problem was, though, or how to correct it without hard resetting, but those files seemed to have corrupted something.

had The same problem had to hard reset. teach me to get a pirate version

I'm having the same issue. So removing the files from the cab fixes it?
______________________________________
Watch my full in-depth review of Touch Pro 2
http://www.youtube.com/watch?v=VgTjSbpFDhQ&feature=channel_page

No problems on my site... Using tt7.915

Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.

Corell said:
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Click to expand...
Click to collapse
Runing gr8 with internal GPS

Roberto79 said:
Runing gr8 with internal GPS
Click to expand...
Click to collapse
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again

Roberto79 said:
No problems on my site... Using tt7.915
Click to expand...
Click to collapse
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?

RMU said:
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
Hmm dont have any of posted problems looks like i was just lucky lol but maybe that somthing jumps up later when i'll "really need it"...
Corell said:
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Click to expand...
Click to collapse
Its the latest release of tomtom7 so it has to work at least a bit older version works gr8 on my TP2, resolution is superb. I have tryed Amigo but it didnt work even with multi resolution .gro file

RMU said:
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
now i see that is not a tomtom problem, because i've hard reset my pro2 and not yet installed tomtom, so i've made another thread for this.
but the bluetooth problem is still there when i install tomtom

I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.

It seems to be. It corrupts the files.
_________________________________________________
Check out my full in-depth videoreview of the Touch Pro2: http://www.fuzemobility.com/excellent-htc-touch-pro-ii-video-review/

dicko99 said:
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
Click to expand...
Click to collapse
Uninstalling tomtom does not help for me.

The files are replaced on the device so a hard reset is the easiest way back.
TT 7.910.9185 is running fine on mine, I did have the same issue with another version of TT7 though, but simply hard reset to recover and started again.
I think (although have not verified) that the BT Stack on the Rhodium has been updated to a Broadcom stack.
Can confirm that the above version works fine, great resolution and no issues using BT after install and with the new BT Stack you can now route all audio from the Rhodium through your hands free / car kit
Cheers,
Beasty

I did have a problem with v7.915.9196 where the device bootup was delayed by about a minute and a half (from 1m20 to about 3m from cold to starting Mobile Shell) which I had to get around by not installing the TomTom BT files.

I used TT7_915.9196_VGA__Negro.cab which does not appear to have the bluetooth files in it.

and this version could also be purchased on tomtom with ur chosen map on an sd-card? just to avoid having to hard reset and stuff after trying to install
thx.

I removed the bluetooth files from the cab with WinCE CAB Manager and installed tomtom agian, now everything works fine.
I'm now using tomtom version 7.450.9028 , i think it will work with other versions to
Thanks!

wonderful, great info now i have one less thing to worry about when my TP2 gets here thanks dude!
EDIT.: Pardon the perhaps n00b question, but i get an error while trying to run the .exe. is it meant for running on the phone or on the pc? i use winxp

GPRS problem unsolved

Hi,
Im using unlocked T-mobile MDA pro 64mb phone with WM 6.1 (build 19960.1.1.8 TML)
The problem is that when I connect to GPRS, Internet explorer, outlook and most of the internet softwares (opera browser, google maps etc...) don't work. Internet explorer stops at loading. outlook says synchronization error. But, a few softwares like IM messenger, some trading software work fine. The problem occurs only when on GPRS. Everything works fine on wifi.
I have been facing this problem since I have unlocked the phone and flashed it for the first time. I have flashed for several times with various roms. initially it works but soon problem reappears. hmm.. Problem did not appear in WM 6.5 (but phone is hell slow. So, im forced to remove it). Further the problem is not network specific as I tried on various networks.
Guys please help me.. I searched a lot on internet and it seems like no one is facing this type of problem in the whole world except me
(Except this: social.microsoft.com/forums/en-US/windowsmobilephonesandaccessories/thread/64977e4f-c8ba-482a-9845-c1d80f88fd71/)

Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.

Simon_WM said:
Hi,
Have you tryed using Tomal;s V10...
am using it now and i havent had a GPRS problem,
and phone runs very smooth with no lag.
Click to expand...
Click to collapse
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?

naveensakhamuri said:
Hi,
Thanks for ur reply..
I dint remember trying it..so, wanna try..
the download links given by tomal (forum.xda-developers.com/showthread.php?t=573739) dint work...
can you provide a link for me to download tomal's V10..?
Click to expand...
Click to collapse
http://www.filebox.com/alhaque/3o6u8gdlfy6j
Also if you want to chnage the radio:
http://forum.xda-developers.com/showthread.php?t=600933&highlight=Challenge

thanks
Hi!
thnx for ur reply... I'm desperately waiting for it...
Any how I tried this... as usually it worked fine at the beginning and problem repeated again. The new development is that the application which I said to be working previously (IM messenger etc...) are also now working now...
Very much frustrated about this issue as I'm unable to find the background reason for it . Even the XDA forums cant help it....And the worst part is that warranty is not going to apply as I unlocked it..

Yet no solution...

info?
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.

kalya said:
Which network?
Prepaid/postpaid?
Did you add a new connection manually yet it won't work?
You are doing something wrong because this is weird.
Go to start>settings>connection>connections>tasks>add new connection>
name...anything, access point.....airtelgprs.com / internet (for idea ) / aircelgprs etc.
Done.
Launch browser , it should connect if you have data plan / enough credit.
Click to expand...
Click to collapse
Hi
Thanks for your suggestions.
Im using airtel network. and all those settings are already set on my phone.
Yes. I accept that my problem is weird. Thats the reason why I'm unable to find a solution for it.
Yet... I'm testing by changing various roms and still no success.
every time the problem repeats on 2-3 usages of gprs.
When I use opera browser it says that "I have some problem in settings". What to do I've checked those settings for hundreds of times and further if there is a problem in connection settings then why the heck it worked for the first few times?

Some stupid suggestions
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!

kalya said:
Try same sim in another handset,
Try another sim or another network in THE Uni,
Try another cell tower area,
Because I have tried every single ROM ...shipped or cooked and this has nothing to do with GPRS getting disconnected.
As you said "I am the only one in the world with this problem" , means it cannot be a real problem , have faith , keep trying.
And for the warranty...Just flash the Original ROM and you are good again!
Click to expand...
Click to collapse
Hi
I did every experiment I can think of.... Including testing this sim on other phone or testing the other sim on this phone.
I even tried flashing the original T-mobile rom.
I also tried to find if the programs I install has something to do with the problem...but found none of it affects.
As you said it may not be a rom problem.
If it fails to work completely then I can guss some thing about the origin of the problem like rom or hardware or whatever...
As it is working well initially, I don't understand where exactly the problem lies...

have you done a doc-format? sometimes that can get rid of very peculiar problems.

-Jonny- said:
have you done a doc-format? sometimes that can get rid of very peculiar problems.
Click to expand...
Click to collapse
Hi
Is the process of using mtty and task 28 55aa command what you call doc-format (sorry for ignorance)?
Then I've already did it...
anyway thanks for your suggestion...
I think the real culprit is activesync. anyway I have to do some tests and confirm.

To clear my doubt I decided to conduct a small test. I factory reset my system for three times to check the gprs connectivity...
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc + pairing up + synchronizing problem reappeared.
second reset:
1. GPRS worked flawlessly.
2. On connecting to pc by pairing up problem reappeared.
First reset:
1. GPRS worked flawlessly.
2. On connecting to pc without pairing up problem reappeared.
So, this strengthened my assumption that the problem is with active sync.
I cannot confirm so easily...
Further I would use my phone with out connecting to PC for 3-4 days and check if problem reappears.
Then I would check it by connecting to a different PC. Then I can confirm whether the problem is with active sync of my system or the phone...
By the way, today is the second day of my testing without connecting to pc and no issues detected till now

folks,
Today on the fourth day of my test, I conclude that connecting to my pc creates the gprs problem. No Idea how and why...
suggestions any one?
anyhow I would connect my phone to a different pc and check out if the problem is with my pc or with the phone...

no suggestions?

How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.

wovens said:
How much space have you got on the phone after sync? The computer may be trying to sync to uni even though you are not aware of it.
How confident are you with dealing with your computer registry, I mean, if you are using a Windows PC that is. You should try to clear any traces of old pairings from the PC before connecting the Uni to it again and allowing it to do a fresh start. It may be loading all sorts of corrupted or duplicated data that are messing up with your system. Backup your registry first, just in case you mess it up by mistake, to be on the safe side. Then, get stuck in and search for the word activesync (or words to that effect in your language) on the registry and where it shows the pairing settings delete only the keys related to pairing with the Uni, then try connecting again. Hope this helps.
Click to expand...
Click to collapse
Hmm..Im sure that I deleted all the older files.. anyway let me I'll try this registry procedure... thanks for your suggestion