I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below
Here's the cab
Just drag to your Vario and run it.
chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
yes, working fine here, all connection settings set manually.
bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records
chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)
I tend to install things like Reader that like a soft reset so it takes me a little longer.
sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?
MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,
The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin
TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.
vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.
vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.
ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings
Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn
Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.
Related
I have been sent a link from O2 Data Support for downloading the new XDA2s ROM upgrade, which apparently will fix the Bluetooth problems.
The link is...
http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIs_launchROM.htm
Haven't done anything with it yet, but thought you guys might like to know...
regards,
Guy
Hmm I wonder if I can use this update on my O2 Xda2s.
I got it in Malasyia.
Noel
I installed it on my UK XDA 2s, I will report back later.
In the PDF it's saying that this version is only for devices sold by O² UK or O² Ireland... Not sure if I should give it a go on my version..
Noel
I think I might wait and see what others say about this before I install it myself. So many that have it already say it is great but then you hear others say it has caused problems.
That post is the launch rom, not an upgrade. LMAO It is intended for people who attempt to flash the XDA IIs with a different vendors rom and screw it up.
Mike
Nope, its not, click the link. O2 are obviously just too lazy to create a new page for a new rom!
Nigel
HAHA you are correct!!! LMAO oh well. :shock: :lol:
Hi..have installed the update..and have encountered several problems...was wondering if anyone could help me.
I hate the fact that the clock has disappeared from the top right so whe u are using applications its no longer visible. Is there any way of bring it back?
Also now when you click the o2 at the top it dosn't give the active connections anymore. Therefore whats the quickest way to disconnect the gprs? and is there any way of bringing that back to how it used to be?
I have also had to reset my phone more often that I had to before.
Was wondering if anyone had encountered the same problems and how to resolve them.
Thanks so much...
Bit the bullet and upgraded last night, wifi still works and as I use Corporate mode I don't get any issues with 02 active, icons or clocks. All seems normal, so far!
Have to agree with Dave. I finally bit the bullet and installed the update last night. Don't like the new O2 active and put the clock straight back with the registry key.
Other than the missing clock and poor O2 Active software which I never use anyway no real problems. Tom Tom still works fine with my Bluetooth GPS receiver. WIFI still works fine with WPA security and everything locked down on the access point.
Still receive SMS notification and its nice that you're not limited to 70 char when using ' in sms text messages now!
All ok.
har5ha:
Just get the old O2 active back. To to this, head to the xda-dev FTP site, find the old O2 XDA IIs extended rom, pull it, find the file install.ARM.CAB (O2 active)
Sync/backup yr stuff then hard reset the XDA IIs, and let it do its stuff. When leave it to install the extended rom, but be ready to soft reset it when you get asked the 'corporate/personal' question (you'll have to watch the screen since there is a timeout). Once it reboots, copy install.ARM.CAB to the machine, and execute it. It will soft reset yr device at the end.
I use 2 things from O2 active, the battery plugin and the O2 icon to kill connections. Shame billy did not think to include a disconnect dialogue as well really (he put on in for vpn).
There might be a way to install old over new, dunno. I tried and it locks loads of files (even if you prevent it from loading).
Nigel
thanks Nigel...I ended up installing gb soft for the disconnect button.
So its ok...still getting loads of crashing. I think am going to reinstall it and then use corporate mode..hopefully it will crash less!
can I get an update on xda iis rom update
Hi all, I'm still new to this whole thing but reading and researching all I can. Don't have an xda iis as of yet, but on the high streets waiting list. I like the phone and in one way, can't wait, but don't want problems when I get it, especially at the price. Can anyone on o2 that has purchased their phone from o2 let me know how you are getting on...problems...ect, before and after the update.? To be honest, I'm a bit afraid to bite the bullet and get one right now due to what I'm hearing...especially since I'm not very computer smart. I do understand that it depends a lot on the manufacturer of the phone but if I had problems like I'm hearing about it would really do my head in...(no patience). Thanks
Well I love my phone to bits...had issues with the update but now that I have hard reset it and put it corporate mode its not freezing anymore.
But you have to remember its a pocket pc...like a pc..will need to be reset every so often...I was resetting mine of average once a day. It just takes a minute.
There are some negative points..but the positive outweighs the negative I think. My old pda was palm os (clie) and this is windows which is really good! As well as the fact that it has a phone built in too!
Hi all.
Can you please post some more feedback on this rom.
How is the BT stability?
Range?
Crackling noise?
License Expired troubbles?
I know its Build 3500, but maybe something else in this rom makes a difference.
How about the problem with sound dissapering when you answer a call.
Any troubbles here? This is really a pain in the (_!_)
Running the New Rom for a couple of days now and it seems much better than the launch Rom, The O2 active stuff is just as pants as usual so remove that and the "Connections" exe from Windows\startup.
Best thing is that it's stopped the annoying bug of the GPRS settings being screwed up when you enable/disable Wi-Fi.
Recommend it myself
Password
Anybody knows the password for this rom
PDA2K Upgrade
Hi, Can this rom replace the i mate rom on the 2K.& If so will it then be sim locked to O2? as I want to use an O2 pay as you go, & T-mobile sim
many thanks in advance............
Could I please be so greedy as to have a Orange-UK only thread?
I am been reading and searching in earnest to see what other peoples experiences are with the various Radio ROMs. It seems most people are happy with 1.38.00.10, although seems to be a few instances of people sticking with older versions because of battery life/drop outs/data freezes. But I am unable to establish what other people are experiencing in the UK on Orange's network.
I am well familiar with the Radio ROM 1.38 + WM6 - good or bad? thread, but not many people in there commenting on Orange UK.
If you are on Orange UK, please can you share you experiences here?
My own experience has been thus.
Before upgrading to WM6, was on stock M3100, which had Radio 1.06 I beleive. This worked flawlessy with push email (Exch 2003), and never had any problems at all with it. This was also the case when I upgraded to LVSW 20070315, leaving Radio Rom as was.
Then I upgraded to Black 2.0 last week, and did the Radio to 1.34 with it. I didnt notice any problems at first, or rather didnt take much notice of not getting email notifications whilst at work. But on Friday I realised the Data connections were freezing.
I have tried going to 1.38.00.10, to 1.35, back to 1.06, even 1.27. Have also tried going back to LVSW 20070315, and am now on LVSW 20070408
I have narrowed it all down to the "common" problem in swicthing between GSM and 3G. At home I seem to be between 3 transmitters, and swicthing is common. Hence the problems I was having Friday.
The Excellent commmgrpro has helped here. Also Bandswitch.
Anyway, with Phone set to GSM only I have no problems. Odd thing is, driving to Sheffield and back yesterday (dont mention the football!!), with phoen set to Auto, I had no problems at all.
Yet at home, and at work, on auto the data connection freezes.
So.... Whats everyone else using on Orange?
i've been using rom 3.23.0.2 with radio 1.38.00.10 on a spv m3100. this device is been freezing like you described in your post, thing is, it's become unuseable since you have to reboot after the freeze and it happens almost continiously... driving me insane.
if anyone knows of a way how to get back wm5, i'd appreciate it!
freben
When I upgraded a while ago I was wondering the same thing. The only negatives re 1.38 at the time seemed to come from orange UK customers so I went for the 1.27 radio and it seems fine.
Have not yet stepped up further, and at the moment, see no reason to.
Especially as I can even get the H now and then. (If it aint broke...)
@Phil, I've "gone black" (v 2.0) with Radio 1.38.00.10 - only since Saturday, so it may be too early to tell. I've got a push email account with Mail2Web, which I don't tend to use that regularly - it's good for aggregating lots of mail stuff when I go away on business, but my data package ain't up to much (don't get me started ) so I only switch it on when required.
Since installing the new ROM/Radio/SPL, my M3100 seems to be much better than it was prior to the update. I've reinstalled all my apps (apart from PPCProfilesPRO - I'll do that tonight) and the phone seems really stable - no more random lockups when taking it off charge and only a couple of "slowdowns" when ending calls, or if Activesync'ing....can't really complain if I'm honest
I'll keep an eye on things - and maybe switch on the Exchange push email for a couple of days - and I'll post again if the situation changes.
Cheers,
Mark.
PS - Message for @freben; read MrVanx's guide on downgrading to WM5 - see THIS POST for details of how to find it.
MrVanx kindly provides a guide here: http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
Do please read very carefully before trying it
Yep...1.27 for me. No real radio problems to report.
Spent a couple of weeks with WMXL 2.0 and the last two weeks with Black 2.0. Both work fine with Orange with 3g (inc HSDPA) and voice. Direct push/web/pop email all fine.
One freeze this morning (first one in two weeks) but dont know if it was radio or os or an app?
Can;t compare with other radios but simply can say am happy with 1.27 (hence why I havent tried 1.38 etc)
Having no problems with set up in sig.
had the freezing with the stock set up.
Could/should we be more scientific here and use one of the many web2.0 survey sites to do a ROM/OS survey to find the right mix?
with a little effort we could then find the most reliable Radio ROM and view by Country/OS/carrier/etc.
just a suggestion..
Mark Crouch said:
but my data package ain't up to much (don't get me started ) so I only switch it on when required.
.
Click to expand...
Click to collapse
@Mark,
try Orange World Browsing, 8ukp for unlimited data access 24/7
Give O a call on 150 and then the billing option, 4
Orange World Browsing is what is what the O rep told me it was listed as. I think one of the key points is the cost, it’s 6.81 exc VAT or 8 inc VAT, that’s the way to check you have the right package.
And you need to be on a 35ukp per month tarif or more to get it.
apologies for off topic post!!
(I was told it was Orange World Unlimited)
unwired4 said:
(I was told it was Orange World Unlimited)
Click to expand...
Click to collapse
My bill confirms it as Orange World Browsing -although I too thought it was OWU.
Not sure if it is still so hard to get as it once was.
Sheep_Head - Well, I am definetely up for using a survey site - any recommendations?
I gave re-flashed my phone back to Black 2.0. Seems to be what most people are using here (IMHO). Have tried Radio 1.27, 1.38.00, and right back to 1.07.
With a totally clean device (i.e. straight after flashing), setting up the orangeinternet connection manually, the thing just wont connect to 3G. Only when I have Band set to GSM will it connect.
Jeez!
I am now in the process of going back to an Orange WM5 rom, to see if it makes any difference, (albeit the Romanian one, so will have to reset the internet connection).
Getting mildly frustrated now.
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
philg2000 said:
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
Click to expand...
Click to collapse
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Hey guys - mega useful thread.
I 'thought' I had solved all of my woes and was feeling bloody smug with myself as I thought I had managed to keep the stupid questions down to a minimum. After reading this obviously not .
I am running Black v2.0 (happily) and the rest of the handset is as per my sig block but I have removed spb pocketbooks and replaced it with shell. I thought it was all working correctly but I am suffering the same connectivity issues as yourself (gprs and not 3G).
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Anything I can help with or test let me know and I will do what I can.
Bezman.
wberesford said:
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Bezman.
Click to expand...
Click to collapse
I have just tested the voicemail fix again since my reinstall and the certificates cab plus installing the sms dll has always worked for me.
Are you having any specific issues with it?
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
mrvanx said:
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Click to expand...
Click to collapse
Hmmm... I dont think that will achieve anything. I have had the latest LVSW ROM on there a while bad, with the same problem.
I'd really like to hear from anyone who has returned a flashed M3100 to Orange.
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions.
Bezman.
Click to expand...
Click to collapse
The only way I have done this recently is using Resco File Explorer. You need to go into the Options menu to ensure you can see all files, then copy the sms_providers.dll into the \Windows directory. It warns you, but if you say yes it lets it happen. I have done this numerous times (have flashed my phone about 10 times recently!) without any problems!
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
Click to expand...
Click to collapse
First few times I did this, it just copied OK with the file explorer. Most recently tho it gave me the same error - so I went to the zip file on my ppc and told it to extract directly to the windows folder, said yes to overwrite and it did. Maybe worth a try. (install the certs first incase it makes a difference.)
SMS Providers CAB
To make my life easier I put the sms_providers.dll from WM5 into a CAB. To install make sure you've installed the sdk certificates (http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298) first and then install this cab - a soft reset is requested at the end of installation and is required.
I've tested this on the latest LVSW ROM and it works perfectly, hopefully will overcome peoples issues with copying this file.
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
all these fantastic genius's here, and no ideas?
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
philg2000 said:
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
Click to expand...
Click to collapse
I use PIE+ and tried all the user agents, but no change. Also noticed gprs/3g connection is real unstable! I'm in london, so definately a good coverage!
Erm....?
Any ideas?
What is the URL? Assume you have "show pictures" set etc ? I have black 3.1 on T mobile (well, virgin) and connection seems stable. This is on a m3100
Yeah I noticed this before too... I've only installed Black up to 3.0, so it the problem existed in at least version, maybe earlier.
http://wap.orange.co.uk for orange world. WEorks in opera fine. in PIE every other site i look at displays correctly, only orange so far is appearing as plain text.
As for the connection, i'm using the latest radio upgrade. to be honest, the connection was pants when i had the standard os installed, but then upgraded the radio, which improved it. But now i upgraded the os, the connection is worse than ever.
Also, Skype refuses to log in!
I'm pretty much ready to the sell piece of $h1t on ebay and get something else!!
So nobody able to help me?????
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
orangeinternet
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
I dont think its down to that in any case, coz it works fine with Opera.
yeah I know, just grasping at straws. I seem to remember that some of the orange sites only worked via the orangewap apn. never use them so dunno really.
Hi, sorry am unable to help as I have same on orangeworld, but would just recommend that before you sell, you try reverting the radio version to 1.38.0.10 or .01.
Makes it a whole different phone, no dropped signals, better battery.
gibster said:
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
Click to expand...
Click to collapse
Yeah, no problems - orangeworld works fine in PIE for me WITH graphics (after I fixed it of course!!)
First I would recommend the latest Orange Radio ROM which is 1.38.00.01 - works best for Orange UK (this is not necessary for my fix to work though.)
See my cab file which installs the Orange UK MMS and internet settings as well as fixing the voicemail icon issue and the orangeworld graphics issue
If anyone needs it, I suppose I could create a cab file containing just the fix for orangeworld on PIE
Ok, here is the cab to just fix the Orangeworld site on Orange UK - it also fixes the voicemail icon since this is kinda essential
This should work on all WM6 ROMs on Orange UK
ps. you DO NOT need this file if you are using the cab file in the post above
Thanks alot Rabdo!!! I'll try the radio downgrade when i get home!!! Orange now works a treat!!!
Thanks!!
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
rabdo! my wife can have your babies if you like!
radio fix and settings cab have sorted me right out!
keep getting the "H" symbol. did a quick test and was close to 500kbs! not sure how reliable that is, but just browsing now is a dream, and no connection dropped!
thanks a lot!
gibster said:
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
Click to expand...
Click to collapse
I have a similar problem on 3 UK in that none of the icons on Planet 3 show up - is this cab something generic that might fix my problem? My phone is working nice and smoothly and the moment so don't want to install it just in case.....
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
thepindoctor said:
Okay so i ordered and received a Daxian T32 phone. This phone is great in all, no problems except for the wifi not working. It has it built in phone it has been disabled and only a wifi firmware update will enable it and whenever that will be out and i dont want to wait. Is there anyway to enable it? Tronicvasion were i got it from said that there might be a hack for it i guess. I was wondering do anyone have any info on this. Thanks.
Click to expand...
Click to collapse
I have heard that there is a hack for it, but haven't been able to find it anywhere. It's probably all over the Chinese forums...in Chinese....
daxian
hi folks!
i got an daxian x999 (which is the same as your t32) and i´m desperatly trying to dump the rom, because i want to modify or even replace it!
if u got to know somethings about hacks or tweaks, please tell me about it!
if someone can tweak it, maybe he even can dump the rom
thanx in advance
chuckbert
p.s.
to have wifi in my phone would be quite cool, too
Hello,
i have the x999+ with working wifi.
If it would be possible to read out my rom. could this be helpfull for you?
michael
rom!
sure it would be helpful... if it would be possible!
i´m trying to do this for a couple of days and i desperately need help from some kind of "rom-god"
so all u "rom-gods" reading this: gimme a hand, please!!!
I do have the 8 Gig mini sd card update for it, but nothing for the wifi yet. I dont even know how to get into the rom to enable it. As for the GPS chip it is over in europe from what i heard.
update
@thepindoctor
what kind of update is it?
just a .cab or something to flash the device?
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
wifi
where did you get the information about the possible wifi-upgrade from?
i´m still very interested in it...
p.s.
i never experienced these kind of problems, though i keep playing around with my daxian to get the bootloader out! kinda strange...
T32 8 gig cab
thepindoctor said:
It is just a cab file for the 8 gig memory card to work and i sure the wifi update will be the same way. I am having so much trouble with this phone rebooting at times and even hard resetting at times, im so glad i kept my wing, gave that to my wife but now im taking it back.
Click to expand...
Click to collapse
Hi,
Were I can find this 8 gig card cab? In my device with wifi has just up to 2 gig.
Thank you in advance!
BR
SDHC update and WIFI
To enable SDHC, you can just look for it on the forum, it is on here several times...
Am not sure, but don't think that there will be an "update" for wifi...
The daxian x999/t32 doesn't have it, the daxian x999+/t32+ (which I have) does however...
So don't think you should get your hopes on for a "wifi update", if you would have a wifi antenna built-in, don't you think they would try to make it work from the beginning?
The + version has also been released a couple of months ago and if there would be such an update, I think they would've released it then.
is the sdhc hack a standard wm6 update for all phones? can't find a specific T32 one on here
I have the Wifi Hack App
Its a little dificult to do this:
1) get the pocket hack master (trial version)
http://store.handmark.com/p/910/Pocket_Hack_Master_for_Windows_Mobile_Pocket_PC
2) Shut off BLUETOOTH on 13%
3) Download http://www.freewarepocketpc.net/get-wmwifirouter-v0-89.html
WIFI router
4) on T32 (only T32) go to Settings - Connections - GPRS Stup, name it WIFI (on gprs internet)
5) save and restart t32. Run the wifi router and it will find your connection
And your using T32 wifi . thanks Rex909 the ghost hack master
i think i explained it right if i left something out let me know
That doesn't really make any sense. I've never been able to get Pocket Hackmaster to work with my T32. And how would one "shut off BLUETOOTH on 13%"??? And what would Hackmaster and the WiFi router have to do with each other?
any answer to the sdhc update whereabouts?
shambolic said:
any answer to the sdhc update whereabouts?
Click to expand...
Click to collapse
the cab that i use is SDHC.777 and is working, do a search with this name
problem with my daxian x999
Hello my friends
I really need your help. My phone starts to fail during booting and also if boot has problem reading some applications.
I made a hard reset as were explained before, blue screen...
So far so good, but still the some problem, I looks like some files are missing, shortcut invalid and my documents some times stay some no.
I am newbie with this but I think there is a problem with the rom.
thanks.
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Draque:the_Plaque said:
Have you used WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator with the phone before?
Until now i have found 4 cases of that behavior with the T32+ (including mine and yours)
I want to know what caused the malfunction. My phone is on the way back to me from china where it was repaired and i dont want it to break down again - so if you have any suspision please share it with me.
Other Software i used:
S2U2, S2P, S2V, and many more...
Click to expand...
Click to collapse
****, YES !!! S2U2 and S2V,
Tomorrow, I'll send to china. Now the phone doesn't boot. Only shows windows mobile screen (blue). Nothing more
It's good to know which soft we have to avoid.
I didn't use WMStorage 1.8, SPB MobileShell2.x or the TomTom Navigator.
Only used S2UD and S2V.
Thanks for your info and share it!
personally i dont really think that s2u2 is responsible but maybe...
On the other Hand i had the following sw installed:
OmapClock - which failed at 204 MHZ
ActiveGCSync - a Google Calender Sync Application
GooSync - also a Google Calender Sync App
opera_wm5_ppc_865 - Browser
osmtracker
PCMKeyboard
Pointui 1.51a
SetVolume
SkypeForPocketPc
many GPS and Geocaching Apps
i also deleted the launcher startup link and the TouchFlo3D App.
btw: did s2u3 always behave right when you rotated the screen?
Good luck for your phone
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1