Related
new Hard-SPL; those of you getting the white screen issue should update... actually, so should everyone else
all ROM chefs are requested to embed 1.35 and instruct users of 1.30 to flash with SSPL
Bout time!!! j/k thanks for sorting this issue out I have bad blocks so I'll flash and post results asap.
fiendz said:
Bout time!!! j/k thanks for sorting this issue out I have bad blocks so I'll flash and post results asap.
Click to expand...
Click to collapse
hey, I'm not getting paid for this
anyway... just had a report from walshieau who was having the problem, he says that it didn't whitescreen on him this time
Thanks Olipro
I installed black 1.2 and got the white screen. Then I installed LSVW and got the screen. Both white screens will go away if I power off then on the phone. Both background text is clear until hovered upon. Then XDA 0.2 all was good. Now RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10_108_Ship.exe all good.
I will wait till its safe to do the next run.
Works great. Thanks.
Just to confirm:
For those with white screens already, flash this BL and reflash your ROM (whatever, OS and whatnot).
mxlaser's temporary fix was fine but if you hard-reset your device, you're back with the white screen. Use this Bootloader! Once you're done reflashing, the white screen will no longer appear: including after a hard reset.
You Have To Force SSPL When You Update Your Phones With This Update.
Cheers
Hi everybody,
I've a big pb with my Trinity when i taken ROM v3.00.07.17 PDAVIET.
Sometimes, when i try to click somewhere on the screen, only the start menu is appeared and disappeared immediately. And it repeated some more times. Even if it appeared its self. And i can't do anything else. I've to remove the battery and restart.
I' tried other OS, but the issue is not resolved.
Have someone know why my Trinity became crazy like that ?
Thanks for your prompt reply
Jk
try this
jackie06 said:
Hi everybody,
I've a big pb with my Trinity when i taken ROM v3.00.07.17 PDAVIET.
Sometimes, when i try to click somewhere on the screen, only the start menu is appeared and disappeared immediately. And it repeated some more times. Even if it appeared its self. And i can't do anything else. I've to remove the battery and restart.
I' tried other OS, but the issue is not resolved.
Have someone know why my Trinity became crazy like that ?
Thanks for your prompt reply
Jk
Click to expand...
Click to collapse
It arrive me sometimes but only the start menu..not the totaly crach..
Try to reflash but follow:
1. Charge your ppc (more than 50%)
2. Flash Hard SPL
3. Eventually flash your radio rom
4. And then flash you Rom.
jackie06 said:
Hi everybody,
I've a big pb with my Trinity when i taken ROM v3.00.07.17 PDAVIET.
Sometimes, when i try to click somewhere on the screen, only the start menu is appeared and disappeared immediately. And it repeated some more times. Even if it appeared its self. And i can't do anything else. I've to remove the battery and restart.
I' tried other OS, but the issue is not resolved.
Have someone know why my Trinity became crazy like that ?
Thanks for your prompt reply
Jk
Click to expand...
Click to collapse
It's a famous HW issue of Trinity!!! If your device in new, bring it back for a change with an other one.
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
TAhsifter88 said:
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
Click to expand...
Click to collapse
I'm under the impression that you are not entering your bootloader screen. Please try this again (soft reset and ASAP, press the vol down button). Keep holding it until you see Red, Green, etc.(rainbow like coloured screen) .... please report back what it says on that screen before we move on.
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
TAhsifter88 said:
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
Click to expand...
Click to collapse
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
cobbs said:
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
Click to expand...
Click to collapse
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
TAhsifter88 said:
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
Click to expand...
Click to collapse
Hi I would but thats me. yes these roms are tweaked for performance.
make sure you have read this http://forum.xda-developers.com/showthread.php?t=416211
warning once you start to flash some roms it is hard to stop.
Hi have a look here to flash from the internal storage.
http://forum.xda-developers.com/showpost.php?p=3287426&postcount=10
Lately I keep like 4 cooked roms in folder on my internal storage and when I feel the need to try a new rom I just copy it to root, change name and install OS from bootloader (volDown, backButton, resetButton).
That is my identical process. Sometimes they never make it to the flashing stage but always a couple on standby...lol
Hi all,
I want to downgrade to 6.1 again after having 6.5 for about 2 days.
I'm experiencing audio issues, which I had before, I sent it to the service-center and it worked like a charm again.
So all I wan't to know is if it's possible to just download the official ROM from HTC.com and use theire RUU to downgrade. I'm a nooooob but I managed to install 6.5 pretty easily. But I don't know what hardSPL does etc. So i'm not totally sure if it's possible. Can anyone help with this. Having abolutely no audio is pretty anoying. Also searched the forum but found nothing usefull, allmost everybody comes to the conclusion that it's a hardware issue. Which is strange because why do I experience this after installing 6.5 and when I used 6.1 it worked.
Thanks in advance
Daan
Load from htc officel website new htc rom and flash of your diamond
when not funktion you cann extraxt the exe.file withe winrar and rename the nb file to diamimg.nbh and take this to root of your diamond hd and make soft reset and audio(-)and reback after push to on/off buttong
syr for my english im türkish and speck germen its inuf
DaanJordaan said:
Hi all,
I want to downgrade to 6.1 again after having 6.5 for about 2 days.
I'm experiencing audio issues, which I had before, I sent it to the service-center and it worked like a charm again.
So all I wan't to know is if it's possible to just download the official ROM from HTC.com and use theire RUU to downgrade. I'm a nooooob but I managed to install 6.5 pretty easily. But I don't know what hardSPL does etc. So i'm not totally sure if it's possible. Can anyone help with this. Having abolutely no audio is pretty anoying. Also searched the forum but found nothing usefull, allmost everybody comes to the conclusion that it's a hardware issue. Which is strange because why do I experience this after installing 6.5 and when I used 6.1 it worked.
Thanks in advance
Daan
Click to expand...
Click to collapse
Ok, let me try. I guess someone will correct me if I'm wrong with what I say
First HardSPL won't let you flash original rom directly. It will block SPL flashing, to avoid relocking or messing up the phone. So, regarding your problem, I would first try to flash a 6.1 cooked rom to make sure that the problem is hardware, not software.
If it's hardware, here is what I did when I had to return my phone:
- First, "cook" an official rom: you have to extract nbh, take only os.nb, rebuild the nbh, flash it.
- Eventually, flash the official radio if you tried alternative radio, same goes for logo.
- After that, your mobile should be almost like official, the only remaining "suspect" is the HardSPL. You have to flash back one of the stock SPL provided here: http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. It has to be done at the end, when everything else is back to stock.
Don't have much time right now to give more details, let me know if you need more...
Thanks a lot man i'm at work right know but i'll try it out as soon as i get home
thanks again
Daan
Just got home from work.
Like you said, I need to know if the problem is HW or SW since i've experienced this problem before, maybe it overheated or something I don't know. Anyhoo I flashed radio 1.11.25.01 and it seems to work fine now. But the funny thing is that when I flashed it with 6.5 there were no problems at all but after about 15 hours or so when I tried to put on some music... Silence!!! F***. So I hope this won't just repeat itself endlessly.
The reason why I tried flashing the radio first is that I kinda like 6.5. But well, if it's going to happen again i'll use your method.
Thanks for the reply, I'll keep you posted if anything weird happens
Daan
DaanJordaan said:
Just got home from work.
Like you said, I need to know if the problem is HW or SW since i've experienced this problem before, maybe it overheated or something I don't know. Anyhoo I flashed radio 1.11.25.01 and it seems to work fine now. But the funny thing is that when I flashed it with 6.5 there were no problems at all but after about 15 hours or so when I tried to put on some music... Silence!!! F***. So I hope this won't just repeat itself endlessly.
The reason why I tried flashing the radio first is that I kinda like 6.5. But well, if it's going to happen again i'll use your method.
Thanks for the reply, I'll keep you posted if anything weird happens
Daan
Click to expand...
Click to collapse
Strange. Yes, it could be overheating Or, maybe a radio crash ? If it happens again, you should try to remove the battery, wait a few seconds and put it back again.
Crossing fingers for you
The sun is Shining!
Well the audio is still working, I'm draining the battery to check if it's maybe a power problem, but so far I still have sound and my battery is down to two bars in the windows mobile power meter (not in the menu bar)
So I really hope radio 1.11.25.01 fixed my problem
I hope this is my last post on this thread and if it isn't, we'll just have to dig further
Thanks very much,
Daan
letama said:
Ok, let me try. I guess someone will correct me if I'm wrong with what I say
First HardSPL won't let you flash original rom directly. It will block SPL flashing, to avoid relocking or messing up the phone. So, regarding your problem, I would first try to flash a 6.1 cooked rom to make sure that the problem is hardware, not software.
If it's hardware, here is what I did when I had to return my phone:
- First, "cook" an official rom: you have to extract nbh, take only os.nb, rebuild the nbh, flash it.
- Eventually, flash the official radio if you tried alternative radio, same goes for logo.
- After that, your mobile should be almost like official, the only remaining "suspect" is the HardSPL. You have to flash back one of the stock SPL provided here: http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39. It has to be done at the end, when everything else is back to stock.
Don't have much time right now to give more details, let me know if you need more...
Click to expand...
Click to collapse
Look in my signature for the config of my diamond. I have had no problems whatsoever flashing an original HTC stock ROM from the HTC website. I just use the executable downloaded from HTC.
henk2484 said:
Look in my signature for the config of my diamond. I have had no problems whatsoever flashing an original HTC stock ROM from the HTC website. I just use the executable downloaded from HTC.
Click to expand...
Click to collapse
Thanks, but i'm sticking to 6.5 I flashed a different radio it's working fine right now, but the battery is draining a little bit faster, but i can live with that.
thanks for the info i'll keep it in mind when i decide to switch back to 6.1
Daan
bandit999 said:
Load from htc officel website new htc rom and flash of your diamond
when not funktion you cann extraxt the exe.file withe winrar and rename the nb file to diamimg.nbh and take this to root of your diamond hd and make soft reset and audio(-)and reback after push to on/off buttong
syr for my english im türkish and speck germen its inuf
Click to expand...
Click to collapse
walla aslanım ben hiç bir şey anlamadım..özür dilerim
I have a screen freezing after unlock or call problem for months, tried differnt things like changing ROMs, lockscreen apps but none of them worked, my screen was still unresponsive for a while after unlocking screen, then i saw senaia's post about TP Calibration and tried, the problem is gone so i wrote this tutorial to help the others.
I take no responsibility for any DAMAGES or BRICKED phone, do it at your own risk
WARNING: This will ERASE all of your data, applications, sd card, messages, contacts etc. so make backups of them.
Here is step by step guide
DONT FORGET TO BACKUP
1. Make a goldcard using tutorial in this thread
2. Unrar attached file to the root of Goldcard
3. Power off phone, boot to bootloader with volume down and power button pressed
4. Wait for while it will search for files
5. Then a screen will show up like
Power => Reflash
Vol-Dn => DIAG
6. Press Volume Down for Diag
7. You will see a screen asking you to put phone on a flat surface, do what it says
8. Once that is done you will see a menu about Clear S58 Data, Ignore it, pull the battery and reboot
9. Repair is done, problem should be solved now
This is my first tutorial for XDA, so any suggestions are welcome
Thanks to senaia, he showed how to do
IT works, finally!
I can confirm that the tutorial made by mstfkaratas is working.
Thank you, I cannot describe how much i appreciate it, my beer money is on it's way!
thanks for beer
nevermind
It seems like i got a bit too emotional on this, and my previous post was a little rushed.
The screen freezing gradually comes back in 24 hours. The waiting times become longer and longer. After i did the above steps the lag was gone, but unfortunately it comes back. Especially after i set up to sync with my google account. I also tries to make a new accont, but without success.
I had this issue but admittedly it had just about disappeared when I upgraded to 2.3.5, but still had the odd freeze when receiving a call but not as bad, I did this tutorial and have not had 1 freeze since, may I suggest your problem is hardware (digitizer) Ivaxona?
hi ivaxona your problem can be hardware related or an app you installed, i can suggest you install apps one by one and check the problem
i cant help you more than this because i am not an expert this solution helped more than 5 phones AFAIK
Sent from HTC WFS
Hi, thanks for the response, i also thought that it may be a touchscreen problem, but it got me thinking, that how could be this possible, when after a short time it start to work absolutely perfect.
I also tried to create a new google account just for testing so the possibility of a 3rd party application causing the problem is eliminated.
I have to mention though that after i place the first call the performance response time degrades significantly. That's why i think that it could be a radio problem as well.
I have to admit that i just recently purchased this digitizer on ebay, and it looked like a second hand unit so i might jut got screwed up.
As a last try before i try to change the digitizer once again, i'll try to upgrade to 2.3.5 as it was suggested.
I'm still on a stock ROM, i suppose there is no 2.3.5 official ROM so i'll have too ROOT the phone, right?
once again thanks for your help!
http://www.filefactory.com/file/c0a...5.3035H_7.53.39.03M_release_225747_signed.exe
this is 2.3.5 EU RUU from shipped roms thread, you can try this, if this doesnt work, there should be tutorials for how to install in this forum. i hope this helps
edit: here is a thread about upgrading 2.3.5 http://forum.xda-developers.com/showthread.php?t=1363693
Thank you very much, got my brothers device to work now
after i upgraded to 2.3.5 the fix is working! Thanks a lot!
Solved!!
Many many thanks!
Ciao.
Thanks brother
thanks brother..!!!
After many months of searching for solution, it is finally fixed.
It's a relief it's not a hardware issue. I am using custom 2.3.5 and it worked.
Thanks.
thanks brother, you saved my cel phone, I wonder which phones this works ???? I tried it with my wildfire s and is worked
nathatheboss said:
thanks brother, you saved my cel phone, I wonder which phones this works ???? I tried it with my wildfire s and is worked
Click to expand...
Click to collapse
the diag file used for this process is only compatible with wildfire s, i dont know if other phones have that kind of diag files
Sent from my HTC Wildfire S
Thanks for your how-to...
Sadly it didn't help for me, although I've successfully performed the DIAG boot on my S-OFF WFS. I'm running the latest version of alquez's Cyanogenmod 7.2.0-RC1-marvel-KANG (03-24).
I'm also not sure if I have the problem that is described in this thread.
Whenever I power on the phone and try the unlock-slide the first time, the slider jumps back after some pixels. Everytime, it's really nasty.
Maybe this is something else and I should start a new thead for it?
Thanks!! This really works!!! I had replaced the screen, but it only worked the left side. After applying your method, this little wilfire s works!!! My girlfriend will be very happy!!!
Thanks for the tut.
Sorry, i still have this proble in my phone, one question.
To do this tutorial, we must be S-OFF?
Thx
no need to be s-off, i have positive feedbacks with s-on devices
Sent from my Wildfire S using Tapatalk 2