Related
Wm5 is very slow in my Qtek 9090......when i open "messages" it takes many time to open it.......and the start menu.......and almost all is more slow than wm2003
I have the same problem.....
Everyone had the same problem, the only thing you can do is overclock your device which will cause battery drainage, or downgrade back to WM2003SE like me
imablackhat said:
Everyone had the same problem, the only thing you can do is overclock your device which will cause battery drainage, or downgrade back to WM2003SE like me
Click to expand...
Click to collapse
The problem is that i can't downgrade it back....i've made some downgrades.....upgrades between WM2003 and WM5....
the last time something whent wrong and in boot menu only apears Serial.......don't apears USB............so i can't comunicate/upgrade....
tunekas said:
The problem is that i can't downgrade it back....i've made some downgrades.....upgrades between WM2003 and WM5....
the last time something whent wrong and in boot menu only apears Serial.......don't apears USB............so i can't comunicate/upgrade....
Click to expand...
Click to collapse
http://cgi.ebay.it/Serial-Sync-Cabl...ryZ48672QQssPageNameZWD2VQQrdZ1QQcmdZViewItem :wink:
mdkia said:
tunekas said:
The problem is that i can't downgrade it back....i've made some downgrades.....upgrades between WM2003 and WM5....
the last time something whent wrong and in boot menu only apears Serial.......don't apears USB............so i can't comunicate/upgrade....
Click to expand...
Click to collapse
http://cgi.ebay.it/Serial-Sync-Cabl...ryZ48672QQssPageNameZWD2VQQrdZ1QQcmdZViewItem :wink:
Click to expand...
Click to collapse
Thanks! I will try to get one of those to see if it works...
You can try turning off the sounds and notifications and I suppose, rebooting frequently...
wm5 VERY SLOWWWWWWWWWWWWWW
scruffty said:
You can try turning off the sounds and notifications and I suppose, rebooting frequently...
Click to expand...
Click to collapse
WM5 is very HEAVY..... and don´t have many new things... WM2003 is Very good and all programs works fine on it...... PDA is not a desktop computer to have Heavy operative system...they must be fast..... and not SLOWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
a little research goes a long way
if you do a little research you will discover the the architecture of wm5 is different from previous versions in that programs are stored on flash rom and read into ram when run (similar to your pc). Flash ROM is slower than RAM and this is why apps/start menu seem slower when you run them for the first time.
I have no speed problems, except for the first 5 seconds after I have turned it on, when it's looking for the WiFi network. But I never keep things running in the background, I have Pocket Plus closing everything except the SMS/E-mail client instead of just minimizing them.
hello all. i have a big problem if you can help me. i have installed windows 2006 and everything is ok (with each version) untill i take off the battery. after i put it back, i power on and the screen is white and remains that way. only thing that i can do is hard reset or another update. why is happening that?
ady_uaic said:
hello all. i have a big problem if you can help me. i have installed windows 2006 and everything is ok (with each version) untill i take off the battery. after i put it back, i power on and the screen is white and remains that way. only thing that i can do is hard reset or another update. why is happening that?
Click to expand...
Click to collapse
Which kind of hard-spl do you have?
the problem was solved. it was the fault of Igo, i think that it has a virus. i've deleted and put a safe and known version, and is working perfectly. The problem was that each time i've hard reset the device or reinstall windows, igo window appears and ask me if i want to install it. anyway, deleting that version of igo, and install another one was the solving matter. thank you all.
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
TAhsifter88 said:
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
Click to expand...
Click to collapse
I'm under the impression that you are not entering your bootloader screen. Please try this again (soft reset and ASAP, press the vol down button). Keep holding it until you see Red, Green, etc.(rainbow like coloured screen) .... please report back what it says on that screen before we move on.
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
TAhsifter88 said:
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
Click to expand...
Click to collapse
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
cobbs said:
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
Click to expand...
Click to collapse
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
TAhsifter88 said:
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
Click to expand...
Click to collapse
Hi I would but thats me. yes these roms are tweaked for performance.
make sure you have read this http://forum.xda-developers.com/showthread.php?t=416211
warning once you start to flash some roms it is hard to stop.
Hi have a look here to flash from the internal storage.
http://forum.xda-developers.com/showpost.php?p=3287426&postcount=10
Lately I keep like 4 cooked roms in folder on my internal storage and when I feel the need to try a new rom I just copy it to root, change name and install OS from bootloader (volDown, backButton, resetButton).
That is my identical process. Sometimes they never make it to the flashing stage but always a couple on standby...lol
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
calvinljh said:
Hi All,
Wonder anyone could built new ROM for ACer E100? Original ROM was having problems, Comm Manager always error.
Regards,
Calvin Lee
Click to expand...
Click to collapse
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
frrfba said:
You can use E101 Rom and soon will be updated
Edit: Try from this link http://hidemyass.com/files/xv4GF/ it is a 28008 build.
To flash just copy on Sdcard and rename it as flash.bin, during reset keep volume up pressed it start sd card update.
Click to expand...
Click to collapse
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Yea we have.. go ahead and flash
calvinljh said:
Hi Frrfba, Thanks bro, wonder you have original file for me to download, as a backup. incase anything happend.
Click to expand...
Click to collapse
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
Hi Hdubli, can I have download link please,
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
TheEvilVirus said:
http://hidemyass.com/files/xv4GF/ there you can download build 28008 for E100.
The flash for me was alright. Some notes though: the setup of Windows isn't working 100%, it seems to freeze at some point and a dropdownbox wasn't clearly shown. Also, the screen isn't used 100%: pixels at the side aren't used. Also, there seems to be a margin for the letters, as some letters at the edge (still in the active area though) seem to fall off.
edit: seems like something went wrong. I get the top bar showing the icons, but the yellow/orange Windows logo doesn't disappear. Have to do a hard reset I guess.
edit2: did a hard reset and this time I disconnected the phone from computer. Everything worked fine now, except that the outside pixels (about 5 on each side) are still not used. But the dropdownboxes all showed alright and it booted alright and installed extrom alright . Sry for the confusion, very good job on the ROM! Will test some more .
Click to expand...
Click to collapse
To correctly have a good "start" after first rebbot, keep pda disconnetcted from everything.
After calibrate screen, extrom install all the cabs in the rom and after reboot it works good everything.
Keep in kind that the rom is tested (in italian) for 3 weeks withou any problems, let us know if need help.
ciao
Everything works fine for me too now. Thank you for the ROM, great job. Love the new build, it's much finger friendlier!
hdubli said:
Yea we have.. go ahead and flash
Click to expand...
Click to collapse
bro, can upload original e100 rom ? pls help
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
TheEvilVirus said:
Hmm there is a problem with ActiveSync: the device doesn't always want to connect. The computer says it is not connected, but the device says it is. After some time or after trying to disconnect, the device just freezes. Annoying .
edit:.
Man hate this. It's really the device, tried 3 computers and they all refuse the connection. They say connecting and then disconnected, while the device thinks it's connected. Really odd, as it worked flawlessly before! Did a clean install and still not working!
Click to expand...
Click to collapse
Bro, this is bug issue, never flash your ROM before you ensure you get your original WWE ROM as default.....
Most importan part, no one is response when my first post, and "they" always told to "flash it, any problem is advise". <--- this part is very funny.
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
TheEvilVirus said:
Not sure what you mean calvin, but anyway I reflashed with this custom ROM and it works again. No clue what changed, as a clean boot didn't help. But I'm happy again. And in case something happens, I still have the original ROM so not much risk for me.
edit: ooh no not again. After the first night, it was screwed again. Can't connect anymore :S. Hmm maybe I should go back to default then
Click to expand...
Click to collapse
Are You using Xp, Vista or else?
Can You check if ActiveSYnc is disconnected when screen goes black (timeout on backlight)? Don't let that Windows Mobile adjust backlight but set it!
In my case never found this kind of problem, but I see in various forum that 6.5 build in some case goes with this problem, for example I got that situation with Vista and with original rom 21840 build.
Apologies for the slightly off topic post, but I don't suppose you guys know of any updated ROMs for the beTouch E200 do you? Would like to get an updated version of WM6.5 on this thing...
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
TheEvilVirus said:
The problem is that the computer (tried both Vista and Windows 7) doesn’t connect, while the device says it is connected. Then nothing happens, except that the device freezes after some time or says that any program I want to run isn’t a valid PPC application :S. After a reset everything is fine again, except that I can’t use activesync. This both happens with USB and Bluetooth connection. The connection is also lost when I power off the phone manually. But that rarely happens: it always freezes before I even get to that point and then it doesn’t respond to anything.
Also, when I unplug the device before it freezes, I get an ARM error saying I need to go to some specific memory address or ARM will break. If I go to that address, the phone freezes with screen off, if I let the ARM break (what the...?!) it freezes with screen on .
I just flashed back to original ROM. The first sync is alright. If it stays alright, then definitely the custom ROM can be 'blamed'. If no further is heard, then everything is fine again with original ROM.
Click to expand...
Click to collapse
Hi TheEvilVirus, can I know where you download the original WWE ROM?, I need as my backup too. thanks thanks.
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
TheEvilVirus said:
I'm sorry, can't give you the location . But if you might need it, maybe something can be arranged .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Just PM Me .
TheEvilVirus said:
Just PM Me .
Click to expand...
Click to collapse
Hi, may I know what does it mean? How can it be arranged? as in?
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
sonyuk143 said:
Hello members,
My diamond screen is often showing black and white screen. It is simply hanging. Each time I had to remove the battery and restart it again.
I am using MIN.74 ROM.
Please let me know what is wrong and suggest me a solution.
Please find the enclosed copy.
Thank you in advance.
Best Regards,
So
Click to expand...
Click to collapse
did you formated the device before flashing ? task29 .. mtty ?
this i had few times after much flashing. but few times meaning 2-3 after MAAAANY flashing .. but if it is often .. probably some leftovers from previous rom ?
it is not a screen problem!
cheers
Even i have this now for the past 2-3 weeks, i thought my diamond was dying
Lets see what happens im gonna backup my phone and try formating it today.
It also happens to me sometimes... But I don't restart the phone... I wait some minutes that the device go into sleep mode and after that the screen is normal again.
It happens very rarely and I don't know what's the cause...
I always flash the device using mtty.
Bye
Marshall
yes it started also on mine, today i had to reboot it twice because of this problem.
I'm using last memo rom with sense 2016.
i never had that problem until now, and i flashed like hundred times almost every rom here, always with mtty.
i have faced that problem too! it's not a big deal for my phone. try to flash other ROM to your Device.i'm using Memo too! and i love it.
maybe it's because a bad ROM flash. try to flash it with other ROM and flash again with your current ROM and try to flasy using mmty.
I have a same issue and I thought that my device is gonna die
I'm using Rottgrub's rom and I alwasy do mtty before flashing rom
I am having the same problem, since the past few weeks. I have flashed the device say 100 times. I've tried different ROMs and the problem recurrs. I do a soft rest and everything returns to normal.
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
When I using GenY 2.6 with Sense, I also got this problem. But I change to 6.5 with titanium, the problem gone. I think the reason is sense, or maybe run too much 3D with Sense.
And of course, I don't think It's a hardware issue.
@sobny:
Yeah- it only happens when I use Sense Rom
as far as i heard, is just "overflashing" .. and NOT known solution for "snow like screen" ..
and it is NOT sense related, as few times i turned OFF sense, and used SPB mobile shell ..
FyreMasq said:
One observation is that when I do task 29. I get I get atleast 5 'ERASE block xxx FAIL' messages. I hope someone can help in this regard.
Click to expand...
Click to collapse
basicly that is flash error, i mean .. blocks in phone, like bad sectors on hard drive, but in the great mtty guide .. it says
ERASE block xxx FAIL !!!
ERASE block xxx FAIL !!!"
(where x is a random number)
This has been asked 100+ times in this thread so this is the final time I will answer:
IT MEANS NOTHING..NADA..ZIP! I have not experienced ANY problem with this output...Please stop asking!
Click to expand...
Click to collapse