Develop Bugs

Almost tried 20 Roms, always hanging!!!

hello,
im using hermes, Crc's rom, and i almost installed 20 roms in the past 3 days but the ROM stucks in loading!!!
after installing the rom, it keeps working, until it stucks from anything, installing program, opening a song, switching to a program....
adfter that, the 1st image of the ROM goes white and nothing happens!!!
so is it SPL problem or what!!!
im using 2.60 olipro SPL...
plz if you know a solution, plz post...
thanks

hiato said:
i almost installed 20 roms in the past 3 days but the phone is not stable!!!
Click to expand...
Click to collapse
Not to point out the obvious, but were any of those 20 the shipped ROM? I've made that mistake before and thought something wrong with the phone. I would try to flash a stock ROM and try again. Good luck friend. Here's the link to the stripped version I use from veyka. Here

which rom did you like best? i do not want to flash 20 roms to find the one for me. all i want is 6.1, touchflo and some basic apps, but it is very confusing to figure out which one to flash.

Thanks to communicate that fast, but i was using the Crc's ROM for so long and it didn't make such an error!!!
is it a must to use an official ROM???

hiato said:
Thanks to communicate that fast, but i was using the Crc's ROM for so long and it didn't make such an error!!!
is it a must to use an official ROM???
Click to expand...
Click to collapse
well, it's not technically official. It's been stripped of the radio and some of the "stuff". You can flash to the link I gave you and then back to another and see if it still hangs. Doing this has helped me before. When you flash the stock ROM it basically resets the memory of the phone to like it was from the original carrier. Just flash it and right after flash your preferred ROM.

Thanks alot, i'll try and feedback...

OK, i tried it, the same problem...
Maybe its a hardware problem? Flash IC or something like that???

I had this same issue starting last week. Never had the issue before. I flashed a new rom, then a few days 3 I think later my phone started to get stuck at loading. I would re flash the same rom, and a few re starts later it would happen again. Tried a new rom with the same results. I was using a rom with Build 21109 when it started.
http://forum.xda-developers.com/showthread.php?t=461680

mmmmmm then we're 2
any solutions?????
is it a CPU problem?!!!

hiato said:
OK, i tried it, the same problem...
Maybe its a hardware problem? Flash IC or something like that???
Click to expand...
Click to collapse
Sorry dude, that's the only thing I've got for that. When i had issues, that fixed it. Hopefully one of the more experienced peeps here will be able to help you out.

Was the first rom you flashed a bigstorage rom? If so check this Dr Puttingham's instructions here
http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6

macmints06 said:
Was the first rom you flashed a bigstorage rom? If so check this Dr Puttingham's instructions here
http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6
Click to expand...
Click to collapse
yup, u r rite.. i faced the problem before.. after i try Dr ways, its never happens to me again
but im not so sure why the hanging problem come

RxenDrav said:
yup, u r rite.. i faced the problem before.. after i try Dr ways, its never happens to me again
but im not so sure why the hanging problem come
Click to expand...
Click to collapse
To explain:
To make a big storage rom, we "break" the structure of the rom, removing the extended rom/main storage pool barrier.
Over time, this leaves the file system "dirty", think of it like a 3year old windows XP install, slow, and iffy.
Flashing a OEM rom, or my stripped rom, is like reformatting your HDD, it lets WM install fresh.
When i did rom testing, I used to flash 20 roms a night sometimes, before i restored back to my stable config, I always flashed that stripped AT&T rom, I never had a random hard reset.

veyka said:
To explain:
To make a big storage rom, we "break" the structure of the rom, removing the extended rom/main storage pool barrier.
Over time, this leaves the file system "dirty", think of it like a 3year old windows XP install, slow, and iffy.
Flashing a OEM rom, or my stripped rom, is like reformatting your HDD, it lets WM install fresh.
When i did rom testing, I used to flash 20 roms a night sometimes, before i restored back to my stable config, I always flashed that stripped AT&T rom, I never had a random hard reset.
Click to expand...
Click to collapse
Preach it brotha!!!!! it's good to have you back man!!

joshkoss said:
Preach it brotha!!!!! it's good to have you back man!!
Click to expand...
Click to collapse
Well there's a super bowl team: joshkoss and veyka!

I am using Faria's last rom for an year. I didn't face any problem with it. I know everybody wanted to have latest build. but all the builds here are based on CRC Rom and this is the one I used once v10 something, i guess, was in interstate high way, my device got halt and nothing left inside. so in last I loaded faria's rom and its working fine.

joshkoss said:
Preach it brotha!!!!! it's good to have you back man!!
Click to expand...
Click to collapse
Its good to be back!
galaxys said:
Well there's a super bowl team: joshkoss and veyka!
Click to expand...
Click to collapse
beastfellow said:
I am using Faria's last rom for an year. I didn't face any problem with it. I know everybody wanted to have latest build. but all the builds here are based on CRC Rom and this is the one I used once v10 something, i guess, was in interstate high way, my device got halt and nothing left inside. so in last I loaded faria's rom and its working fine.
Click to expand...
Click to collapse
Well, some people have never had a problem, even going from BS > BS rom, others Hard Rest the moment they flash a new rom, As i always say, I used CRC's roms as my stable, and flashing a oem rom when i wanted to keep the install for longer than 20min always worked for me!

Hard SPL not working?

So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.

TAhsifter88 said:
So I'm having problems installing Hard SPL (Olinex Unsigned). The phone is connected w/ Active-sync to my computer, and all of those required "steps" to check before you begin flashing were there. It takes just a few seconds for the HardSPL to install, and it says "congratulations...", so I assumed it went well. However, when it boots up, it says NOTHING about Olinex. Instead, when I'm on the boot screen, it has red letters, the lower ones stating my normal ROM build. It looks like:
R 1.00.25.5
G 1.52.29.25.12H
D 1.93 ...
I assume this is the bootloader? I held the lower volume button and hit the soft reset button to get to the bootloader, and that was the same screen it went to. However, then the ROM boots up on the phone, and it's the same intro screen as my initial ROM was. When I proceed with trying to install the HardSPL again, it tells me my current ROM is 1.93.401.2.. not Olinex.' I also tried the SSPLmanual file. No good..
Also, I realized that when I ask for it to update, Mobile Device Center loses connection w/ my phone. Maybe I am just having a problem holding a connection between the two? Activesync is turned on on my phone, and Mobile Device Center says that my phone is connected before the flash.
Has anyone had this problem before, or know how I can fix it? Thanks everyone. I've been looking around everywhere.
Click to expand...
Click to collapse
I'm under the impression that you are not entering your bootloader screen. Please try this again (soft reset and ASAP, press the vol down button). Keep holding it until you see Red, Green, etc.(rainbow like coloured screen) .... please report back what it says on that screen before we move on.

wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.

TAhsifter88 said:
wow.. I suppose that did the trick. AND it DOES say that it has Olinex on it, so I guess that installed w/o a problem! Thank, I really appreciate the help. Unfortunately, I've heard many different ways to get there (mainly hold vol-down THEN press soft-reset).
One last question though.. Now that I spent a good 30 minutes installing the list of those tweaks, would I really see much of an improvement jumping to a cooked ROM? I was looking at getting AZTOR or Nataly's lite (I'm not asking which one..), but I am not sure how much of an improvement I'm looking at. I'm currently running the stock ROM as 1.93 (I guess I'm running Olinex atm). Now that I've applied all of those tweaks from that one page, is it worth it to jump to a cooked ROM?
Thanks again! That makes my day seem MUCH more successful now.
Click to expand...
Click to collapse
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.

cobbs said:
Hi I would not to back to a stock 1.93 rom even the stock 2.03 rom is a lot better in my option.
Click to expand...
Click to collapse
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.

TAhsifter88 said:
haha, so you recommend I go ahead and push my luck w/ a 2.03 cooked ROM? Will I really have to worry about all of those tweaks, or will they already be optimized in the cooked roms? Again, I'm looking at 2 that are based off of performance, so I can expect they'll already be well-tweaked, but I'm new w/ all of this.
Click to expand...
Click to collapse
Hi I would but thats me. yes these roms are tweaked for performance.
make sure you have read this http://forum.xda-developers.com/showthread.php?t=416211
warning once you start to flash some roms it is hard to stop.

Hi have a look here to flash from the internal storage.
http://forum.xda-developers.com/showpost.php?p=3287426&postcount=10

Lately I keep like 4 cooked roms in folder on my internal storage and when I feel the need to try a new rom I just copy it to root, change name and install OS from bootloader (volDown, backButton, resetButton).

That is my identical process. Sometimes they never make it to the flashing stage but always a couple on standby...lol

i just hang on Welcom screen

i Download And update 6.5 rom directly pressing resset button and holding volume down + back key. now what happend after update success my devise hang on O2 Welcom screen
can i get it back to work plz reply me quick

I am having problems as well with it, where in the internal memory did you put the DIAMIMG.NBH file because I just put it in the first place I seen in it.holding those buttons does nothing for me.

1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY

michal_banszel said:
1. HardSPL is in?
2. If you had and ROM before that has less size then try to flash your new ROM using MTTY
Click to expand...
Click to collapse
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance

jungl1st said:
Hello, I have same problem, had HSPL 1.4, tried all versions from 1.23 to 1.93 as well as flashed many radio'sand roms from stock esn and wwe ones to Udk's/aztor/cloudyfa/tom codon.
Created a 0 KB "welcome.not" file on root to bypass the welcome screen and is fine but as touchscreen is not responding, I cannot do anything else with devise.
I mostly flash from device.
Any Idea anyone
Thanks in advance
Click to expand...
Click to collapse
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA

cloudedhopes said:
try the mtty as mentioned above - follow steps in this thread: http://forum.xda-developers.com/showthread.php?t=540290
also - most of these (virtually all) are GSM, hope you're not flashing on CDMA
Click to expand...
Click to collapse
I'm flashing on GSM so it should be fine.
Even if I've been around for a while, I've never used mtty,so I hope it does wonders as my pc is going crazy flashing about every rom, radios or HSPL without nay improvement so far.
Many many thanks for the help and link, I'll give it a go asap.

Tilt2 tethering help

HI im having some very big problems with my tilt2. I can teather it fine but for some reason after a day or two i get the remote party has ended the connection, and no matter what i do to it, weather it be uninstall the script and speed patch and reinstall it, it wont help. so i have to format the phone and load it all over again and it works fine for about 2 days tops. Anyone have any ideas why this is happening? I seem to be formatting this phone every 2 days just to get it to teather.

i had the same thing happen to my kaiser with the stock att rom what i did was flash the rom and radio. after that problem was gone never happened again. you can also try this http://forum.xda-developers.com/showthread.php?t=538874
i don't know if this is of any help to you. After you get the error message can you still connect with active sync?

nope
after the errormessage i cant connect on the internet at all, i have to formatt the phone and reload everything to get it to work again

Rom and radio
What rom and radio do you reccomend for the tilt2 thats stable

i remember getting that error on my blackjack, it was mostly because i let it idle and data disconnects when not in use. its not like its a stable connection. if you wanted that you buy the crappy little usb card.

tomfubarr said:
What rom and radio do you reccomend for the tilt2 thats stable
Click to expand...
Click to collapse
the rom i'm using right now is here http://forum.xda-developers.com/showthread.php?t=617142
and Radio 4.49.25.91 i found the link on the same page.
if you're new to flashing i suggest you go here first http://forum.xda-developers.com/showthread.php?t=550540 it helped me out alot

Possible solution
The above mentioned "idle" problem is more than likely your culprit. I had a similar problem as well with the stock ROM. I suggest using NRG's Leo ROM to fix this problem. There are other solutions, but they are pretty tech savvy ones. Plus, if you haven't flashed your ROM yet, dude, you don't know what you're missing. The whole reason we're here is to push our phone's to the limit as far as functionality is concerned. Stock ROM's don't even cut it. Give a new one a whirl, I promise you won't be disappointed, plus, your reformatting issue will be gone as well, just a heads up from someone who's been around, you know?

Stuck
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out

tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
Is your phone "unlocked?"

tomfubarr said:
OK i try to update rom and im stuck on 0% of the hard spl prog and wont do nothing then errors out
Click to expand...
Click to collapse
For the Tilt2 you'll want to use the enablerapinew.cab file in the Hard SPL thread.

[Q] No call volume on Kaiser?

Ok, I don't know why but with a Haret install with the same zImage and build Fat Free Froyo as the NAND install, there is no call volume or media volume at all.
I mean they're there, but don't work. Sometimes hear someone on the other end in Android, but they never hear me.
What I have used is on the main page with the devil sign (my contribution). I can't see why it would be any different.
I had a NAND install of the same kernel and build before, but NAND started to corrupt too much so went to a Haret SD install. I never had any problems apart from lack of ipv6 support, but sod it. I reflashed the phone with the WM 6.1 ROM. I can't remember the filename (or find where I grabbed it from), but the ROM details are:
R 1.27.12.11
G 22.45.88.07H
D 1.56.00.00
Note: I did have the latest HardSPL as well. Could the radio have been version-lowered to fook up Android?
Any help appreciated!!!

Your RADIO version is wrong for Android.
Try 1.65.xx.xx or 1.71.09.01

Hmm....it was 1.65....is it possible that while reflashing WM that it downgraded the radio ROM (and probably other things)? I checked in the bootloader and I still have HardSPL 3.34
KAIS130
SPL-3.34.hard
CPLD-8
shows up in the tri-colour screen.
So if that's the case, it's just a simple radio rom reflash??

xteejx said:
So if that's the case, it's just a simple radio rom reflash??
Click to expand...
Click to collapse
Yes
10char

Great! Thank you. Although if it goes wrong I will be back to haunt you lol

Seems to be working fine. Thanks again!
**haunting suspended**