Develop Bugs

Upgrading m5000 ROM to JASJAR_WWE_11353_137_10301.exe

I'm attempting to install iMate JasJar ROM on my SPV M5000 as detailed in the sticky topic "EXEC SUMMARY: TIPS n TRICKS to make your JasJar run well" in the Universal forum.
So far, it hasn't worked
Here's what I'm doing:
1) Downloaded https://www.clubimate.com/support/JASJAR/ROM/JASJAR_WWE_11353_137_10301.zip
2) Sync then reset the M5000
3) Left it plugged in, ran the JASJAR_WWE_11353_137_10301.exe
4) Click next, then it is "checking the information on your device"...
5) Then it says "Error 101: Connection Error" and have to exit.
I have tried this over and over, and on another PC with AS4.1 installed. Keep getting this error.
Any ideas?

off AS4.1
You have to try do not syncronize with AS,so, just click in setting conection in AS y keept disable conect with usb and COM.

Yeh, I've tried turning off connection options in ActiveSync. The little red cross shows on my tray icon, but getting "Error 101 Connection Error".
I've also had Error 120: Country ID Error.
I have tried running the update in bootloader mode. Still doesn't work so I reset out of that.
Thanks in advance!
Mat

You have to use MaUpgradeUt_NoID.exe to bypass the country error, since you're going from one manufacturer's ROM to another.

Hi there
Thanks for the advice... I tried downloading, unzipping, copying to PPC and installing MaUpgradeUt_noID.exe. It just gives error "This is not a valid PPC application" when you double-click it in the PPC file explorer.
Any ideas? Is this the right version of the file? Am I missing something?

No no u dont put the MayaNOID.exe on your ppc...
look in the folder of the jasjar rom you should see an executable romupgutt.exe (the only executable in the folder with a picture), simply copy the NO Id .exe into the rom folder and delete the rom upgrade utility executable thats already there.
Connect your M5000 via usb, kill activesync then launch the No ID upgrader. If it fails the first time, running it a second time usually does the trick

After you have applied the imate rom, is it possible to run all of the Orange cab files to re-apply the proper connection settings?

captainsensible2002 said:
After you have applied the imate rom, is it possible to run all of the Orange cab files to re-apply the proper connection settings?
Click to expand...
Click to collapse
Just unlocked my ext_ROM using buzz's unlocker. Have copied the orange CAB files to desktop PC and will attempt to run them after rom upgrade. Will let you know how it went.

MurphmanL said:
No no u dont put the MayaNOID.exe on your ppc...
look in the folder of the jasjar rom you should see an executable romupgutt.exe (the only executable in the folder with a picture), simply copy the NO Id .exe into the rom folder and delete the rom upgrade utility executable thats already there.
Connect your M5000 via usb, kill activesync then launch the No ID upgrader. If it fails the first time, running it a second time usually does the trick
Click to expand...
Click to collapse
The JasJar rom I have is just a single executable to run on the desktop PC. There's no folder... should there be?

Maybe I don't have the right files?
I have
JASJAR_WWE_11353_137_10301.exe
ROMUpgradeUt.exe (downloaded randomly from somewhere)
MaUpgradeUt_noID.exe (downloaded from forum.xda-developers.com)
But yeh - the latter two ask for RUU.dll when I run them on the PC.
Should I have a folder full of other files, where do I get them?

The RUU.dll file is inside the JASJAR...exe file. Right-click on the executable and extract it to a folder using WinRAR or WinZip that is installed on your PC. Then, you can copy the MaUpgradeUt_NoID.exe to that folder and run it.

BeyondtheTech said:
The RUU.dll file is inside the JASJAR...exe file. Right-click on the executable and extract it to a folder using WinRAR or WinZip that is installed on your PC. Then, you can copy the MaUpgradeUt_NoID.exe to that folder and run it.
Click to expand...
Click to collapse
Hey BTT! Thanks for the advice.
Haha - I tried using Winzip and WinRar to extract the archive (it's self-executable right?)
Anyway - didn't work (error was that it could not be recognised by the app). So used filemon to determine what it was writing to and found it under docs and settings\username\local settings\temp.

Sorry I'm being a complete lamer. Just very scared I'm going to end up with brick!
So, I now have this screen. It shows a Magician! Can I use it for my Universal?
Why doesn't it have the update version information??! I'm scared!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

That's how far I got too and was equally scared! No doubt someone will convince us its quite safe! I will let you go first though...

Good - glad to know I'm not alone!
Anyway - anyone who's done this before - please come forward and confirm it's all going to be ok!
Thanks!

Bump!
ANYONE who has done a ROM upgrade before - please confirm that the screen I see above is okay for a Universal upgrade!
Don't mean to sound pushy - I really do appreciate all your help!

hi
can anyone with english m5000 post the rom on the ftp (if you cant dump the rom then maybe you can get it from the orange werbsite if its there)
and why do you want to put imate or other roms on your spv...are there any bugs? thanks

zohaer21 said:
hi
can anyone with english m5000 post the rom on the ftp (if you cant dump the rom then maybe you can get it from the orange werbsite if its there)
and why do you want to put imate or other roms on your spv...are there any bugs? thanks
Click to expand...
Click to collapse
As far as I know, I don't think the ROM can be dumped. Nor have Orange released a ROM update and so it's not available anywhere!
Reason I want to put iMate ROM on is to test if there are any performance gains to be made. People seem to recommend updating to iMate ROM. Either way it's an experiment.
BUT - I'm still loathed to go through the process .... can someone who's done it post and confirm that it's ok to use the Magician update wizard AND that it's ok that the version info isn't shown in the update screen (see above)?
Thanks in advance.
Mat

i tried it on my spv m5000 using the files listed above. got past the magician screen. didn't work. just said that the rom didnt suit the machine because its from a different country. then the program ended.
still, I have recently been reading that the qtek rom is the one to go for.

here's the picture

[HELP] Dead iPAQ hx2110

Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...

well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.

Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...

sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa

Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...

oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799

Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream

is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963

i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you

Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english

WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!

How to reload the default software back to HTC Excalibur

Hello,
Need your guys help urgently. I have a HTC Excalibur, but recently did not power ON for about afew weeks, and now when I power ON, it will just hang at the booting green page showing "Windows Mobile Direct Push Technology", and can never goto the main screen at all, suspected that the software corrupted.
Please help, I have tried to use the Activesync but it does not detect my HTC Excalibur. Is there any way to reload back the default software/firmware image back to the device? like BlackBerry device, there's a software application and can use the Desktop Manager Application Loader to reload the software/firmware back to the device, is there such similar way for HTC Excalibur? Or any alternatives to resolve this issue?
Please HELP, any kind soul expert out there to help?
Thousand of thanks.

How to do a hard-reset. Won't reload to default but worth a try.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hello there! Mine is the dopod c720w, do the steps for hard reset work for c720w? Merci

mosescso said:
hello there! Mine is the dopod c720w, do the steps for hard reset work for c720w? Merci
Click to expand...
Click to collapse
Yes it's the same phone
Just a different brand name.

hello there! Have tried several times, but it does not work, still the same as the problem, hang and stop at bootup screen. : (
What other ways?

mosescso said:
hello there! Have tried several times, but it does not work, still the same as the problem, hang and stop at bootup screen. : (
What other ways?
Click to expand...
Click to collapse
Sorry to ask a silly question did you see the onscreen promps to reset device?

Take out the sd card?

gospeed.racer said:
Take out the sd card?
Click to expand...
Click to collapse
Good answer gospeed
If only they put that in the pic.

You Want The BooTLoader Screen First {Color Screen}
mosescso said:
Hello,
Need your guys help urgently. I have a HTC Excalibur, but recently did not power ON for about afew weeks, and now when I power ON, it will just hang at the booting green page showing "Windows Mobile Direct Push Technology", and can never goto the main screen at all, suspected that the software corrupted.
Please help, I have tried to use the Activesync but it does not detect my HTC Excalibur. Is there any way to reload back the default software/firmware image back to the device? like BlackBerry device, there's a software application and can use the Desktop Manager Application Loader to reload the software/firmware back to the device, is there such similar way for HTC Excalibur? Or any alternatives to resolve this issue?
Please HELP, any kind soul expert out there to help?
Thousand of thanks.
Click to expand...
Click to collapse
They are 2 ways that You can get the bootloader screen back, by connecting your phone to your PC via USB, catch this {although the phone may look like it's not connected to your PC via active, but it is connected, you will not see the green Active sync icon on your PC at this time, but you phone is still connected to your PC via active sync}, understand this...!
Next, while your phone is connected to your PC via active sync, push and hold the camera button for several seconds, keep trying until the color screen appear {BootLoader screen}, should the BootLoader screen appear, You will have to install a 6.0 ROM back in your device, before you put a 6.1 ROM on your device.
If the above method should fail, this is another method, but kind of difficult, soft reset your mobile device, while your phone is coming back up, press and hold down the the 2 soft key {Home Key and Back Key} and the camera buttons at the same time, until the color screen comes up, you may have to try this several times, be patient. Should the color screen come up, install a 6.0 ROM back on your device before installing a 6.1 ROM to your device. These 2 method have worked for me and others in the past......!

HTC P3300 WM6 to 6.5

hey Guys
i have a Problem
on my P3300 is wm6 Professional installed and i will wm 6.5
i have downloaded this file http://forum.xda-developers.com/showthread.php?t=513732
and i started the ROMUpdateUtility but they came a Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and on the phone
pleace help me my english is very bad

hi 'Murat' (careful about giving away personal information when posting screenshots of your desktop)
search the forum for error 260
it's probably because you're using vista, although the screen that comes up and says to close other programs before flashing probably means INCLUDING Windows Media Player and whatever that MACOS-dock type taskbar addon is
Especially media player because it can try to make a connection with your phone as a 'removable storage' device
once you get that coloured screen up on your phone , it means your device is in bootloader mode
you can try to run the update again once the phone is already in that state and it might fix it.
if not, as i said, search the forum ... you might need to change your device drivers
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
this might also be a good time to point out theat there is also a v44 version of that rom on here, rather than the v43 you're trying to use

d-signet said:
search the forum for error 260
it's probably because you're using vista
once you get that coloured screen up, it means your device is in bootloader mode
you can try to run the update again once the phone is in that state and it might fix it.
if not, as i said, search the forum
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
Click to expand...
Click to collapse
sorry my english is very bad
can i flash this ROM on my Device??
i cant find error 260 in the forum. can you pleace help me for this problem i will wm6.5 on my device an touch flo
PLEACE HELP ME
yes i have vista 32-bit

Hi,
good idea for the phone screen but we can't read the numbers so you can just give them. i think SPL 3.13.0000 so you haven't Unlock your device.
1- Unlock your device http://forum.xda-developers.com/showthread.php?t=311403
2- if it's good, your numbers on bootloader (screen 3 colors) have changed normally in 1.11.xxx
3- you can now flash your device with your wm6.5 rom.
And yes use search for help you if always problem.

IPL 3.13.0001
SPL 3.13.0000
thx
i unlock my phone

hy
i will unlock my device but the dos window is 100% complete and he came the error 260
im a noob

Which program do you use for connect your device to vista?

Active Sync and vista not compatible
i have no programm
i have the connect the device on my pc per USB and my pc has find the phone for windows mobile device

ok try this soft for synchron device to PC
http://www.commentcamarche.net/faq/sujet-5337-activesync-et-windows-vista

i have no programm
what for a program i install for this phone??

look the link 2 post before.
Sorry i have big lag and it's very long for edit

ok thanks wait pleace

i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash

d-signet said:
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
Click to expand...
Click to collapse
hy
i will in the bootloader mode
how i make
sry my english

sorry, I don't think i understand your question
to put your phone into bootloader mode, hold the RECORD/NOTES button and press the stylus into the reset hole at the same time.
Then you get the coloured stripes screen like your screenshot (that is bootloader mode)
First you need to USPL your phone. This makes SPL version 1.11.0000
Don't upgrade the rom until you can see :
SPL 1.11.0000
when you reset
search the forum for help or follow the link earlier

hy
i installed windows mobile device center and have connect my phone with my pc its OK
but
i will install the unlock "DOS Window 100%---------his open automatic ROMUpdateUtility and my P3300 have a white screen and is not more connected with the WMDC"
i pushed the Reset Button
pleace help
i search 1 week for this problem
pleace GUYS

hy thanks for you help
i cant find the RECORD/NOTES button
can you pleace help me
sry but my english ist very very bad

Try to run the "start_uspl" from Artemis_USPL but i think you must:
1 instal the program for synchron with vista,
2 connect your device but not in bootloader, you must see the today screen on your device.
3 only when synchron is finished you can run the "start_uspl" for unlock your device.
4 if there is no error and when the process is finished, normally he ask for restart device, and look if the numbers 3.13 is change in 1.11
Edit if there is an error (white screen, etc) try to run the "start_uspl" again and again. It will finish by working, i had to try many times before it really working.

but when the prozess finished "dos window 100%" my phone display is white an the connection to the PC is deactive

hy LeTo08
i have testing you TUTORIAL but this not completly
here the pictures
HELP

Hot to get rid of notifications tab on the top?

Hi all,
I have realized that the notifications tab when you press the top part of the screen is pretty useless and works easily even when you are ending your call and touch it via your ear; it's awful. I can not even see my remaining battery easily because of this.
So the question is; is there any way to get rid of this tab and have the old grid type, big icons style notifications tab?

Special made for u. Tested & fresh from farm Extract & run in ur device. EDIT : Please soft reset after intstall the cab.
Or u may take a look for a (better) one here
Just let me know if u want to revert to default one.

Thanks very much! It works just as I requested; but there's another problem this time; this cab prevents the loading of Touch Flo 3D interface I have reset several times but no luck.
Any ideas?
monx® said:
Special made for u. Tested & fresh from farm Extract & run in ur device. EDIT : Please soft reset after intstall the cab.
Or u may take a look for a (better) one here
Just let me know if u want to revert to default one.
Click to expand...
Click to collapse

monx® said:
Special made for u. Tested & fresh from farm Extract & run in ur device. EDIT : Please soft reset after intstall the cab.
Or u may take a look for a (better) one here
Just let me know if u want to revert to default one.
Click to expand...
Click to collapse
How can I revert to the default one?

aegeuss said:
Thanks very much! It works just as I requested; but there's another problem this time; this cab prevents the loading of Touch Flo 3D interface I have reset several times but no luck.
Any ideas?
Click to expand...
Click to collapse
It was fully tested with my unbranded Touch Pro 2 with no issue.
wonghyf said:
How can I revert to the default one?
Click to expand...
Click to collapse
Sure. Pls install attached cab (additionally, uninstall the LargeTitle bar first).

wow.. exactly what i was lookin for
WOW...
i love you guys..
i love the new bar...
thanks.

Great program, though for some reason the first time I installed it it went into endless reboots, did a hard reset and everything seems fine now, so just make sure you backup first

Can someone post a screencap of what this cab really does? I am not sure if I understand what it changes....
Nevermind... I know, I have a serious patience issue to work out
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I think I like it! Its even way faster too! Kudos to the developer of this tweak.

Thanks
It works like a charm after a few soft resets Now it does not confere with Manila; it's superb. I think it should be sticky.
Thanks again.
monx® said:
It was fully tested with my unbranded Touch Pro 2 with no issue.
Sure. Pls install attached cab (additionally, uninstall the LargeTitle bar first).
Click to expand...
Click to collapse

monx® said:
Sure. Pls install attached cab (additionally, uninstall the LargeTitle bar first).
Click to expand...
Click to collapse
I tried this method (uninstalling MONX_RHODIUM_LARGE_TITLEBAR and after soft reset installing MONX_RHODIUM_NOTIFICATION_TOPBAR_RESTORE) but it does not restore the original titlebar yet now I am stuck with default WM notifications which I hate!!!
Can you please tell me if there is a manual method (copying files, checking reg keys) to restore this and please post the files?
Thanks a lot.
Pimmr

The restore cab will work after soft reset or :
Delete this key (or uninstall the previous 'monx RHODIUM LargeTitleBar'):
[HKEY_LOCAL_MACHINE\Services\LargeTitleBar]
And restore/create this key/value :
[HKEY_LOCAL_MACHINE\Services\NOTIFICATIONMANAGER]
"Dll"="NotificationManager.dll"
Soft-reset > Done.
Thanks.

monx® said:
The restore cab will work after soft reset or :
Delete this key (or uninstall the previous 'monx RHODIUM LargeTitleBar'):
[HKEY_LOCAL_MACHINE\Services\LargeTitleBar]
And restore/create this key/value :
[HKEY_LOCAL_MACHINE\Services\NOTIFICATIONMANAGER]
"Dll"="NotificationManager.dll"
Soft-reset > Done.
Thanks.
Click to expand...
Click to collapse
Thanks for your reply Monx. I removed the LargeTitleBar key and verified the Dll was set correctly (it was) and did a soft reset but unfortunately I keep getting the default WM notifications.
I noticed below the NOTIFICATIONMANAGER there is a key called NOTIFY:
[HKEY_LOCAL_MACHINE\Services\NOTIFY]
"Index"=dword:00000000
"Prefix"="NFY"
"Keep"=dword:00000001
"Order"=dword:00000000
"Dll"="NOTIFY.Dll"
Is this a original key or a leftover from some other notifications cab?
I don't think it matters much though, I tried removing the key and I could not notice any difference so I put it back.
I am getting a bit desparate... I was just about to make a full backup before I noticed this so I would really like to get it working again.
Could it be the NotificationManager.dll file is damaged or lost?
Here are the properties:

monx® said:
Special made for u. Tested & fresh from farm Extract & run in ur device. EDIT : Please soft reset after intstall the cab.
Or u may take a look for a (better) one here
Just let me know if u want to revert to default one.
Click to expand...
Click to collapse
Great work. Thanks!
I didn't experience any reset loops on my Sprint TP2. I just disabled TF3D before installing, reset, and re-enabled TF3D.