Develop Bugs

I Have screwed my MDA!

I bought a MDA2 off ebay and it said in the ad it had WM2005 on it, i figured it was a typo so i went ahead and bought it. ANyway i got the MDA and it has WM2005! The main reason i bought it was to run tomtom navigator 5, now i managed to install it but the backlight refuses to work. I just want to know where i can download the original rom from as i dont want WM2005 because its not designed for the phone....
Tried to be clever and i downloaded a rom from the o2 website and tried to reflash the phone with that rom, it came up with some error message and it totally crapped out my mda. My mda is now on a dark screen that says serial v1.02 and when i put it in the cradle it changes to USB v1.02. Tried running different roms but its not accepting any. Activesync is not picking the device up anymore...
can anyone help?

OK so you want an official rom?
1) What is the HTC anme for an MDA2?
2) What carrier are you currently on?

i dont mind what rom it is...as long as it works. Carrier? I am on the o2 network if that helps. HTC anme? I have no idea what that means. If you could tell me how i can get this info for you i will

oh crap, spelling mistake on my end, i meant HTC name
also i forgot, what country are you using the phone in?

Well its a T-Mobile MDA (what it says on the device itself but i beleive its the same as an XDA2). I am in England and i am on the o2 network.
looks exactly like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you mind having a non-official rom?

I dont mind at all, anything that makes it work.

ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )

Midget_1990 said:
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Click to expand...
Click to collapse
Ok firstly, hard reset (holding power whilst placing stylus in reset hole) is the first thing i tried, its not having non of it. Just shows USB v1.02. I was able to download the rom from the o2 website by giving my IMEI of this tmobile phone (how? i dont know). There was an error durin the installation which caused my mda to crap out. Its not going past that screen at all.

during the install? as in while it was actually copying the rom?

yup m8, as it was getting transferred over

k, this hapened to me earlier todday as it happens (i was testing ivans new rom)
the reason it was caused is that the operator ID is set wrong, to fix this follow these instructions:
go to "c:\documents and settings\your_username\local settings\temp" and delete everything there.
run the origional o2 upgrade DONT PRESS NEXT OR ANYTHING, JUST START IT.
go back to "c:\documents and settings\your_username\local settings\temp"
there should be a new folder created, copy this to a tempory location.
extract the contents of this attached zip file into that copied directory.
double click on setoperator.bat
run the HimaUpgradeUt.exe in that folder to put your phone back to the wm2003 os.
if this doesn't work then i'm stumped, sorry

when i run the o2 upgrade it just shows a plf183.tmp file, no folders... ill try afew more things

ok this is what i am getting...
http://www.killerinstinct.pwp.blueyonder.co.uk/xdaerror.jpg

ok maybe the password was wrong for the file
does anyone know what version of himaupgradeut the latest o2 uk update uses? then i can get the right password

i dont mind using any ROM as long as its WM2003

try the same method as above, but with these files:

The instruction on recovery bricked FLAME

Hi all!
Manual for recovery bricked FLAME
Symptoms: the device didn't switch on after experiments with an upgrade. Reacted only to power unit connection at the inserted battery - the orange led lights up. At this situation to bring the device back to life, only a flash bootloader (eboot.nb0) by means of interface JTAG is needed and possible.
1. Hardware preparation.
Please disassemble the FLAME and extract board. The detailed instruction
You should make a simple JTAG - cable.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Max lenght this cable is 20-25sm. My variant:
Alsoit is posible to produce some contacts, for example (see foto)
2. Software preparation.
To be required in addition:
1. Micro-SD card and cardreader.
2. Program SDFormatter, download here or here
3. FlameRecoveryTools from Medush, download
4. Diskimage.nb0 - any for FLAME. I extract it from official update
Well, now at all of us it is ready. We begin...
1. Extract FlameRecoveryTools on c:\
2. Run c:\FlameRecoveryTools\giveio_setup.exe (It driver for JTAG-cable). Please make sure that driver is installed and started.
3. Attach JTAG-cable to LPT-port your PC and FLAME board.
4. Plug power cable to FLAME board (or USB-cable from PC).
IMPORTANT! Do not press the button-indicator of the inserted accumulator!!!!
5. Open cmd-window. (Start-Run-cmd)
6. Go to c:\FlameRecoveryTools\JFlash_MM\
7. Run Start.bat
If everything is OK, a flash process will start and you should see:
If you see:
Please carefully check up correctness and reliability of all connections, a cause of error may be ONLY in it. Don't try to find missing file or any other program mistakes.
Ok, flash process is finished, verification successful, eboot.nbo has been flashed.
Unplug all, assemble your FLAME, plug AC-cable and turn on power.
Device is starting with error ERR-003A. (FOTO)
If you see message "battery is too low" - please wait for some time...and press reset again ))))
Ok.
8. Put micro-SD card in to your cardreader and run SDFormatter. Select "Full format".
9. Copy the following files to card: diskimage.nb0, eboot.nb0 (for example from my FlameRecoveryTools) end empty files-passwords rerr003a.kez and 1xdtgklo.kez.
10. Put card into device and start upgrade (press and hold soft-buttons (- and -) and press reset.
11. Finish!.
Insert the accumulator into place and turn on FLAME.
Enjoy the working device!
If my article has helped you, you can donate me:
WebMoney WMID 205584530674
WebMoney USD - Z177840443105
WebMoney Euro - E685734257524
PayPal: use recipient name "[email protected]"
I'm sorry for my bad English...

hello and thank you for this procedure. do you think, that is a possibility to create a JTAG for HP 2790b device? I have damaged bootloader (flash process did not well) and device is brick. I flashed it a lot of time, but now it is really dead. thanx for any info.

sinmae said:
hello and thank you for this procedure. do you think, that is a possibility to create a JTAG for HP 2790b device? I have damaged bootloader (flash process did not well) and device is brick. I flashed it a lot of time, but now it is really dead. thanx for any info.
Click to expand...
Click to collapse
Throught JTAG you can recovery any device. If you don't find scheme of contacts JTAG for your device in the Internet, you will have to make everything by yourself. HP has very individual scheme of contacts JTAG. That is why there is the only way - to bring your device (or you can by the same one but spoiled) to a good service center to unsold processor, find contacts JTAG and sold processor back. of cource they should do it with the guaranty of device safety.
Further is easier -knowing the contacts, you can sold contacts for JTAG and flash the device. I can help you with software. Wright a private message, I'll give you my e-mail.
Good Luck and never give up!

Help me i need JTAG for O2 Stealth

thanks Yudgin for your flame recovery manual !
could you please tell me how you could extract the bootloader for flame from the upgrade utility provided by O2
also i have a dead stealth --> could you share your insight as to what might the JTAG pin structure for this model
i have highlighted my thoughts in red --> i think these are active pins

oki, so I must lift the procesor. I have proper tools for that but not enough time for that. I report back when I found it, I guess there is more users who need JTAG for 27xx series. bye.
Yudgin said:
to bring your device (or you can by the same one but spoiled) to a good service center to unsold processor, find contacts JTAG and sold processor back.
Click to expand...
Click to collapse

Does anyone have the Flame JTAG Pin identification on the mainboard?

nuttapung said:
Help me i need JTAG for O2 Stealth
Click to expand...
Click to collapse
@nuttapung, have you find JTAG for your Stealth? I think I just had mine bricked as well. Days after kept it off unused, I turned it on, M2D intiated but then suddenly it automatically did a hard reset by itself. Upon completion, it started that hard reset process again and again so I have to unplug the battery. And that was the end of it.

heeelpmeeee pleaseeeee
have you find JTAG for your Stealth? please send me an copy of this...please... and the eboot.nb0...thx my email is [email protected]

important:
Hi my friend, I want to know where is the second TCK pin in flame board? I destory the TCK which pointed by your photo!

Mine too. I destroyed the TDI contacts. Anyone has the alternate contact point?

I done all after eboot my Flame sticks with ERR-003A
Yudgin said:
Hi all!
I done all after eboot my Flame sticks with ERR-003A and does'nt start rom uploading
and again goes into the same Err-003a screen, I tried many diffrent SD cards and Various Files eg. Eboot, eboot Diskimage .diskimage rerr03 etc nothing works. after pressing _ and _ and reset the flame goes off and after a second againg it shows ERR-003A screen, Any suggestion please?
Thank you
Click to expand...
Click to collapse

need Rom and help plz

Hello
sorry to ask this. but I need best Rom for my HTC TYTN1, because I always find myself with a problem I posted here :
http://forum.xda-developers.com/showthread.php?t=484219
Now I have the problem of two call buttons that do not work! just sometimes
I ask you if it is possible to redo my htc to zero! as he emerged from the factory for the 1st time!
I see no other solution.
help me please
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It sounds like you might be having some sort of hardware or button issues.
I don't know if it would help to do a hard reset or not. Make sure you back up your contacts and stuff first, or they will all be gone! You can hold both "softkey buttons" the buttons above the windows and ok buttons and hit reset, or go into system settings and run clear storage. But again, I'm not sure if that would help.
Or if your running a custom rom, you can try flashing your operators stock rom, or one of the at&t ones in my signature.
But if the buttons are going crazy, I'm still leaning towards something going on with some of the keys, or possibly even the hardware keyboard.
Has the phone been dropped? I have been reading some things about the ribbon cable coming undone or going bad that can cause odd issues.
Maybe someone else has experienced this, and can chime in?

Hi boog321
First, thank you for your answer
I just tried to restore but my buttons do not work
I downloaded now
Hermes Official AT & T shipped with WM6 Radio 1.54.07.00
I will Try, even if it is in English I think! what I need one in French! but essential to get my HTC well now
I already have a hard spl v7 and market,
it's good ?! or I should to do somthing after or I can do other hard !
Lately I bought a accesoire but I think that is the problem! by what I had the problem before you!
Cable Audio Multifonctions YC A300
and as I am new here and I have a little knowledge with the ROM and flash, I ask your help plz
thank you

You could try going to start>settings>system>clear storage
that is the equivalent to a hard reset.
or see if you can remove the software for the accessory.

hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!

m-graphique said:
hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!
Click to expand...
Click to collapse
It sounds like your buttons are dead
I've never had one of our phones apart yet, maybe somebody else here could point you in the right direction for instructions or direct you towards someone that could repair it.
I'm sorry that I can't help you beyond this.

I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.
Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!
thx boog321

You can find a bunch of that stuff in the wiki. Hermes wiki
Available Original Shipped WM5 ROM Versions
Available Original Shipped WM6 ROM Versions
Available Extracted Radio Upgrade Only
Hopefully it has the one from your original provider listed.

thx again boog321
I tried a few ROM's but still same problem.
story by if can you please guide me to install windows 5!
thank you

Follow the link I gave above for WM5, then pick the one for your language and flash, just like the others.

that is what I do,
I run normally my ROM and after gives me Error 260 no answer the phone!
for info I have :
HERM200
IPL-1.04
HERM200
SPL-2.10.olipro

Maybe make sure both computer and phone are rebooted, then make sure activesync is connected to the phone. It needs to send commands to the phone.
If that doesn't work, I may be able to strip the rom down so it could be flashed via sd card. Just let me know, but to flash via sd card, it must be formatted fat32, and be 2 gig or less.

ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.

ultramag69 said:
ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.
Click to expand...
Click to collapse
I was thinking if it is like the at&t rom, it would need to be stripped then compiled back into a .nbh. Since it comes as an .exe

Sounds to me like it's a D-Pad problem, rather than a ROM problem.
Have u experienced any white-screen problems.
There is a thread dedicated to D-Pad problems, just search XDA.
I have repaired several TYTN 1s with either D-PAD or WSOD problems using the instructions gathered on this forum.

Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...

ultramag69 said:
Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...
Click to expand...
Click to collapse
Your, right, I had a huge brain fart! I was thinking of when I was playing with stripping the radio on my own. But, it had been so many beers ago!
Only difference is, that I use 7zip to extract it

Hi
Thank you for your answers
I dont know how, but I see that the buttons still works! just that sometimes and rarely now does not work!
I installed ROM version 3.62 / Radio 1.38.00.10
just the problem is that I found in English. and I'm good with windows and French and I already azerty keyboard ...
possible to change language of my TYTN without refueling ROM please?

HTC P3300 WM6 to 6.5

hey Guys
i have a Problem
on my P3300 is wm6 Professional installed and i will wm 6.5
i have downloaded this file http://forum.xda-developers.com/showthread.php?t=513732
and i started the ROMUpdateUtility but they came a Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and on the phone
pleace help me my english is very bad

hi 'Murat' (careful about giving away personal information when posting screenshots of your desktop)
search the forum for error 260
it's probably because you're using vista, although the screen that comes up and says to close other programs before flashing probably means INCLUDING Windows Media Player and whatever that MACOS-dock type taskbar addon is
Especially media player because it can try to make a connection with your phone as a 'removable storage' device
once you get that coloured screen up on your phone , it means your device is in bootloader mode
you can try to run the update again once the phone is already in that state and it might fix it.
if not, as i said, search the forum ... you might need to change your device drivers
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
this might also be a good time to point out theat there is also a v44 version of that rom on here, rather than the v43 you're trying to use

d-signet said:
search the forum for error 260
it's probably because you're using vista
once you get that coloured screen up, it means your device is in bootloader mode
you can try to run the update again once the phone is in that state and it might fix it.
if not, as i said, search the forum
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
Click to expand...
Click to collapse
sorry my english is very bad
can i flash this ROM on my Device??
i cant find error 260 in the forum. can you pleace help me for this problem i will wm6.5 on my device an touch flo
PLEACE HELP ME
yes i have vista 32-bit

Hi,
good idea for the phone screen but we can't read the numbers so you can just give them. i think SPL 3.13.0000 so you haven't Unlock your device.
1- Unlock your device http://forum.xda-developers.com/showthread.php?t=311403
2- if it's good, your numbers on bootloader (screen 3 colors) have changed normally in 1.11.xxx
3- you can now flash your device with your wm6.5 rom.
And yes use search for help you if always problem.

IPL 3.13.0001
SPL 3.13.0000
thx
i unlock my phone

hy
i will unlock my device but the dos window is 100% complete and he came the error 260
im a noob

Which program do you use for connect your device to vista?

Active Sync and vista not compatible
i have no programm
i have the connect the device on my pc per USB and my pc has find the phone for windows mobile device

ok try this soft for synchron device to PC
http://www.commentcamarche.net/faq/sujet-5337-activesync-et-windows-vista

i have no programm
what for a program i install for this phone??

look the link 2 post before.
Sorry i have big lag and it's very long for edit

ok thanks wait pleace

i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash

d-signet said:
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
Click to expand...
Click to collapse
hy
i will in the bootloader mode
how i make
sry my english

sorry, I don't think i understand your question
to put your phone into bootloader mode, hold the RECORD/NOTES button and press the stylus into the reset hole at the same time.
Then you get the coloured stripes screen like your screenshot (that is bootloader mode)
First you need to USPL your phone. This makes SPL version 1.11.0000
Don't upgrade the rom until you can see :
SPL 1.11.0000
when you reset
search the forum for help or follow the link earlier

hy
i installed windows mobile device center and have connect my phone with my pc its OK
but
i will install the unlock "DOS Window 100%---------his open automatic ROMUpdateUtility and my P3300 have a white screen and is not more connected with the WMDC"
i pushed the Reset Button
pleace help
i search 1 week for this problem
pleace GUYS

hy thanks for you help
i cant find the RECORD/NOTES button
can you pleace help me
sry but my english ist very very bad

Try to run the "start_uspl" from Artemis_USPL but i think you must:
1 instal the program for synchron with vista,
2 connect your device but not in bootloader, you must see the today screen on your device.
3 only when synchron is finished you can run the "start_uspl" for unlock your device.
4 if there is no error and when the process is finished, normally he ask for restart device, and look if the numbers 3.13 is change in 1.11
Edit if there is an error (white screen, etc) try to run the "start_uspl" again and again. It will finish by working, i had to try many times before it really working.

but when the prozess finished "dos window 100%" my phone display is white an the connection to the PC is deactive

hy LeTo08
i have testing you TUTORIAL but this not completly
here the pictures
HELP

Samsung i780 PDA ok PHONE not ok!?

Hello ,
Can anybody help i have i780 and there was WM6.5 23412 and i tried to update it to 23420 or 23071 but with both of these rom i got problem with flashing PHONE with mirage but failing in 50-70 % depending the size of rom..
I have had done it before to and no problems wasnt then ,and right know i have only pda functions and in the version button in settings there is only PDA number PHONE is blank,
using windows 7 and virtual windows xp!
Can anybody tell what may go wrong?
I have tried different things but neither on them working!
Sry my bad english!

Man, just realised what are you doing.
You are trying to flash PDA part to PHONE
All ROM's that are cooked are only PDA part!
PHONE part stills untouch!
You have now to reflash PDA and PHONE from offical samsung firmware.
After that you flash ONLY PDA part from any new version found here.
Good luck!

Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!

arxxx86 said:
Just for case:I just say that with wm6.5 all was working probably. after ja try phone side was writing filed , last thing what i was tried was PDA side over flash in it worked! BUT PHONE side of mirage fail writing!
Click to expand...
Click to collapse
Ah thats simple. To flash phone part flasher changes usb state to cdma modem driver. So u need to install it first.
CDMA Modem Drivers:
XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970110&coflag=0
Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970108&coflag=0

failed!
Device name:6&22194588&0&1
EBoot version=01.35
Start downloading...
PHONE-Switching USB to PHONE...
PHONE-COM3 detected
PHONE-Attempting to open COM 3...
PHONE-Create COM 3 succeed...
PHONE-Opening COM 3 succeed...
PHONE-Waiting for erasing CODE area...
PHONE-Erasing CODE area complete...
PHONE-Writing failed at 69.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Man you make me smiling! I wrote about this mistake before!
Look where you have to flash new ROM's - it"s PDA part (not PHONE)
So now phone part is wrong, because you have flash it with pda bin.
Make nwo next procedure:
Open in "PDA" : WM6.5.. ..bin
Open in "Phone": phone.bin (find download link below)
Flash! After first boot make hard reset.
Good luck
Phone part http://www.mediafire.com/file/mnzyd2mzdi5/PHONE.rar. Dont forget to upack phone.bin from rar

thank you! It worked ! I understand i before wanted to but pda to phone part!
but firstly when i got that mobile there was wm6.0 then i upgrade it to 6.1 and then with bin fail 6.5 but i remembered that i put both wm6.5 bin to pda and phone part and then it worked... or i might done something differently
anyway big thanks to you

Thank You
I had the same Problem i had already flashed Samsung Official rom at the end But fails to write the Phone with official .bin for phone..its giving error at Exactly 50%..
Let me try Your method..Hope it works for me too..
Thanks in Advance

hi mate
I have tried Your method of only flashing the Phone.bin (as per attached Pic)
I think there is some serious problem with the flashing part or the tool ...
may be the new version of Multi Downloader has any option to revive the Phone ..
Currently My phone has NO Network.
Can You help me...

Try some solutions:
1. download with phone part from (link I provided before).
2. There can be another trouble with CDMA drivers or USB. XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970107&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970109&coflag=0
Reinstall drivers. Connect USB to rear of PC not front. retry
3. download full upgrade (including upgadetool) XP http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970112&coflag=0 Vista http://uk.samsungmobile.com/pmgmvst.do?visitgbn=10970111&coflag=0
4. If doesnt help- try to flash on another PC with XP or Win7(use XP drivers).

Heineken78,
thanks for your help. I made the same mistake - flashed the phone part - and had a bit of trouble finding out how the solve the problem. Your solution is very easy to implement and very effective.
Thanks a lot!