Hello
sorry to ask this. but I need best Rom for my HTC TYTN1, because I always find myself with a problem I posted here :
http://forum.xda-developers.com/showthread.php?t=484219
Now I have the problem of two call buttons that do not work! just sometimes
I ask you if it is possible to redo my htc to zero! as he emerged from the factory for the 1st time!
I see no other solution.
help me please
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It sounds like you might be having some sort of hardware or button issues.
I don't know if it would help to do a hard reset or not. Make sure you back up your contacts and stuff first, or they will all be gone! You can hold both "softkey buttons" the buttons above the windows and ok buttons and hit reset, or go into system settings and run clear storage. But again, I'm not sure if that would help.
Or if your running a custom rom, you can try flashing your operators stock rom, or one of the at&t ones in my signature.
But if the buttons are going crazy, I'm still leaning towards something going on with some of the keys, or possibly even the hardware keyboard.
Has the phone been dropped? I have been reading some things about the ribbon cable coming undone or going bad that can cause odd issues.
Maybe someone else has experienced this, and can chime in?
Hi boog321
First, thank you for your answer
I just tried to restore but my buttons do not work
I downloaded now
Hermes Official AT & T shipped with WM6 Radio 1.54.07.00
I will Try, even if it is in English I think! what I need one in French! but essential to get my HTC well now
I already have a hard spl v7 and market,
it's good ?! or I should to do somthing after or I can do other hard !
Lately I bought a accesoire but I think that is the problem! by what I had the problem before you!
Cable Audio Multifonctions YC A300
and as I am new here and I have a little knowledge with the ROM and flash, I ask your help plz
thank you
You could try going to start>settings>system>clear storage
that is the equivalent to a hard reset.
or see if you can remove the software for the accessory.
hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!
m-graphique said:
hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!
Click to expand...
Click to collapse
It sounds like your buttons are dead
I've never had one of our phones apart yet, maybe somebody else here could point you in the right direction for instructions or direct you towards someone that could repair it.
I'm sorry that I can't help you beyond this.
I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.
Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!
thx boog321
You can find a bunch of that stuff in the wiki. Hermes wiki
Available Original Shipped WM5 ROM Versions
Available Original Shipped WM6 ROM Versions
Available Extracted Radio Upgrade Only
Hopefully it has the one from your original provider listed.
thx again boog321
I tried a few ROM's but still same problem.
story by if can you please guide me to install windows 5!
thank you
Follow the link I gave above for WM5, then pick the one for your language and flash, just like the others.
that is what I do,
I run normally my ROM and after gives me Error 260 no answer the phone!
for info I have :
HERM200
IPL-1.04
HERM200
SPL-2.10.olipro
Maybe make sure both computer and phone are rebooted, then make sure activesync is connected to the phone. It needs to send commands to the phone.
If that doesn't work, I may be able to strip the rom down so it could be flashed via sd card. Just let me know, but to flash via sd card, it must be formatted fat32, and be 2 gig or less.
ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.
ultramag69 said:
ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.
Click to expand...
Click to collapse
I was thinking if it is like the at&t rom, it would need to be stripped then compiled back into a .nbh. Since it comes as an .exe
Sounds to me like it's a D-Pad problem, rather than a ROM problem.
Have u experienced any white-screen problems.
There is a thread dedicated to D-Pad problems, just search XDA.
I have repaired several TYTN 1s with either D-PAD or WSOD problems using the instructions gathered on this forum.
Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...
ultramag69 said:
Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...
Click to expand...
Click to collapse
Your, right, I had a huge brain fart! I was thinking of when I was playing with stripping the radio on my own. But, it had been so many beers ago!
Only difference is, that I use 7zip to extract it
Hi
Thank you for your answers
I dont know how, but I see that the buttons still works! just that sometimes and rarely now does not work!
I installed ROM version 3.62 / Radio 1.38.00.10
just the problem is that I found in English. and I'm good with windows and French and I already azerty keyboard ...
possible to change language of my TYTN without refueling ROM please?
Related
I bought a MDA2 off ebay and it said in the ad it had WM2005 on it, i figured it was a typo so i went ahead and bought it. ANyway i got the MDA and it has WM2005! The main reason i bought it was to run tomtom navigator 5, now i managed to install it but the backlight refuses to work. I just want to know where i can download the original rom from as i dont want WM2005 because its not designed for the phone....
Tried to be clever and i downloaded a rom from the o2 website and tried to reflash the phone with that rom, it came up with some error message and it totally crapped out my mda. My mda is now on a dark screen that says serial v1.02 and when i put it in the cradle it changes to USB v1.02. Tried running different roms but its not accepting any. Activesync is not picking the device up anymore...
can anyone help?
OK so you want an official rom?
1) What is the HTC anme for an MDA2?
2) What carrier are you currently on?
i dont mind what rom it is...as long as it works. Carrier? I am on the o2 network if that helps. HTC anme? I have no idea what that means. If you could tell me how i can get this info for you i will
oh crap, spelling mistake on my end, i meant HTC name
also i forgot, what country are you using the phone in?
Well its a T-Mobile MDA (what it says on the device itself but i beleive its the same as an XDA2). I am in England and i am on the o2 network.
looks exactly like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you mind having a non-official rom?
I dont mind at all, anything that makes it work.
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Midget_1990 said:
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Click to expand...
Click to collapse
Ok firstly, hard reset (holding power whilst placing stylus in reset hole) is the first thing i tried, its not having non of it. Just shows USB v1.02. I was able to download the rom from the o2 website by giving my IMEI of this tmobile phone (how? i dont know). There was an error durin the installation which caused my mda to crap out. Its not going past that screen at all.
during the install? as in while it was actually copying the rom?
yup m8, as it was getting transferred over
k, this hapened to me earlier todday as it happens (i was testing ivans new rom)
the reason it was caused is that the operator ID is set wrong, to fix this follow these instructions:
go to "c:\documents and settings\your_username\local settings\temp" and delete everything there.
run the origional o2 upgrade DONT PRESS NEXT OR ANYTHING, JUST START IT.
go back to "c:\documents and settings\your_username\local settings\temp"
there should be a new folder created, copy this to a tempory location.
extract the contents of this attached zip file into that copied directory.
double click on setoperator.bat
run the HimaUpgradeUt.exe in that folder to put your phone back to the wm2003 os.
if this doesn't work then i'm stumped, sorry
when i run the o2 upgrade it just shows a plf183.tmp file, no folders... ill try afew more things
ok this is what i am getting...
http://www.killerinstinct.pwp.blueyonder.co.uk/xdaerror.jpg
ok maybe the password was wrong for the file
does anyone know what version of himaupgradeut the latest o2 uk update uses? then i can get the right password
i dont mind using any ROM as long as its WM2003
try the same method as above, but with these files:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.
Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...
sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa
Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...
oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799
Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream
is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963
i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you
Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english
WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!
Specially thanks QwertY and tester MadDog
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
All is like as in WM6 ROM for eten M600+, but extrom was cleaned
m600_WM6.1kE_R1 (40.8 Mb):
http://depositfiles.com/files/4121322
http://openfile.ru/33181
http://www.filefactory.com/file/1eb686/
http://ifolder.ru/5741603
That's cool. Got something to play around w/ my M600 (not plus)
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Im planning new releases,but only at weekdays,because i have troubles with inet operators,they told me that they would deside problem in time, that i said before
Good luck with that man....ISP's are hard to argue with.
thanks
you are truly amazing, thanks a bunch. i flashed it and its really good. although the calculator doesn't work for me, if you know why, let me know.
i know this problem, ill fix it in future release
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
Lagm, read the Wm6.1 for M600+ thread.
Kozhura,
Just flash your rom for M600, work great and I found USB host is working natively too. But I found my San Disk 6G Micro SDHC (w/ SD adapter) is not working. Are you planning to add SDHC support later?
Maybe the same issue w/ M600+ rom, I found GPRS is not working
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
kozhura said:
i know this problem, ill fix it in future release
Click to expand...
Click to collapse
ok, thanks, there are also some other little missing links and what not.
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
Thank you master athlon.
Cheers!
can i flash back to WM5 rom 230 after i flash this?
thanks,
dgun
Yes. I just did that because GPRS is not working.
Extract the temp.dat from WM5 rom (search my old post if you dunno how), rename it as xxx.bin and copy it to the SD. Then do the same thing as how to flash this rom
M700 Wm6.1 Rom
mr.r9 said:
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Click to expand...
Click to collapse
This ROM has 76MB of free storage space.
http://eten-users.eu/index.php?showtopic=13454
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
You can also copy USBDLUpdate_Console.exe(=*) to the SD card, and run that file from within Windows Mobile ( no need to force bootloader mode).
That way you don't need to reboot, Program (*) will set WM to sleep start the bootloader and upgrade the Glofiish
This way you don't need EUUs, or a scary USB connection to upgrade your precious.
* USBDLUpdate_Console.exe is included in every rom update.
** Put Phone always into battery charger (do NOT connect to PC/MAC).
*** Make shure your phone is in "flight mode" (gsm / wifi / bluetooth turned off).
i think i'm gonna wait for the next release, when the gprs working..
Khozura..you are the best.
dgun
Thanks jlavoie. I am downloading the rom now.
I wish the M700 had support like this
Thanks alot
haven't seen the update yet..where is it?
Kozhura...are you still going to update this to R2?
thanks,
Hello, my first post
I just got my artemis and want to install the smallest and quickest ROM thats the least battery consuming.
As i read and search this awesome forum i found that it might be the:
YuE_WM6.1_v4.4_LiteSE_WWE
but apperently there is supposed to be a
"Extraclean" version thats even smaller?
But this one i cant find anywhere to download. is there a "extraclean" and is it in english? (or so that i can change it to english after the installation or something like that)
are there any compability problems with any applications i might wanna install on the artemis later on these what i understand stripped small ROM´s?
All i wanna have working when i install it is a gps navigator appl. (route66 to avoid gprs fees.)
and VITO´s Winterface, TCPMP, MORTPLAYER and Resco keyboard.
what does the WWE stand for?
sorry for noob questions, and incorrect English but i want to get started with the best choice of ROM for me so i dont need to start over.
thankful for any help/ shcizoid
WWE = World Wide English
but in this rom, the keyboards are in Russian
shcizoid said:
Hello, my first post
I just got my artemis and want to install the smallest and quickest ROM thats the least battery consuming.
As i read and search this awesome forum i found that it might be the:
YuE_WM6.1_v4.4_LiteSE_WWE
but apperently there is supposed to be a
"Extraclean" version thats even smaller?
But this one i cant find anywhere to download. is there a "extraclean" and is it in english? (or so that i can change it to english after the installation or something like that)
are there any compability problems with any applications i might wanna install on the artemis later on these what i understand stripped small ROM´s?
All i wanna have working when i install it is a gps navigator appl. (route66 to avoid gprs fees.)
and VITO´s Winterface, TCPMP, MORTPLAYER and Resco keyboard.
what does the WWE stand for?
sorry for noob questions, and incorrect English but i want to get started with the best choice of ROM for me so i dont need to start over.
thankful for any help/ shcizoid
Click to expand...
Click to collapse
Here
http://rapidshare.com/files/110290520/YuE_WM6.1_v4.4_ExtraClean_WWE.zip
rgr81 said:
but in this rom, the keyboards are in Russian
Click to expand...
Click to collapse
If Resco Keyboard is installed, will that not be installed as an English keyboard? Im not too sure as all my ROM's have been WWE.
No it is possible to install other language keyboard.
But I have problem with this image, installator says, it is corrupted.
amissus said:
No it is possible to install other language keyboard.
But I have problem with this image, installator says, it is corrupted.
Click to expand...
Click to collapse
For me same problem
So, when it isn't only my problem, could someone please reload this image?
found this on another thread regarding the extraclean:
"YuE 4.4 ExtraClean: to avoide "Mismatch Size" you have to flash using SD-Card."
is this the error u guys who tried gets?
cause if its indeed corrupt then it would be nice to know
but if it works after flashing with SD-card, could someone confirm it? would be great with feedback
and also a link to a "howto flash using the SD-card"
SD-flashing
You can find this in the wiki-part of this site. But here's the link: http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
rgr81 said:
WWE = World Wide English
but in this rom, the keyboards are in Russian
Click to expand...
Click to collapse
This cab changes the language of the keyboard to english
http://rapidshare.com/files/131245747/ALL_ENG_SIP.cab.html
Tried through SD flashing and success. Follow wiki.
Free Flash 63,14MB (with pocket controller and ALL_ENG_SIP.cab keyboard, without over 65MB).
Free RAM 24,13 (with running active sync and pocket controller, without over 26MB).
After installing ALL_ENG_SIP.cab russian keyboard definitely dissapear, but at dialpad
and at contact order bar stays russian symbols.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In YuE s cooker signature is this version
--------------------
HTC Artemis
YuE v6.1 3.13.19949 WWE
WM6.1 5.2.19949 (Build 19949.1.2.0)
can we find this version?
Tell me one thing.
Why do you want this ROM if you have availlable one of the best clean ROM of that kind arround. The Artemis touch vanilla 4.02 has 55mb total storage memory and 27mb free program memory and is stable, fast and very clean.
Is that only for the 12 meg of storage diference?
Cheers
We hate touch software and HTC stuffs.
but we want lastest radio ROM.
hi,
i am trying to flash my device using SD card but when i follow the instructions in Wiki i cannot do it. I am pressing the record button down and pressing the RESET button as explained. And suddenly i can see a white screen with "searching for sd card" message then it switches to the 4 coloured screen which indicates the version information and it freezes as it is. I had doubt about my sd card but when i turn on the device i can see there is no problem with it.
Would you please suggest how can i flash my device with SD card ?
Or would you please tell the best way to learn how to upgrade my device with a ROM.
thanks in advance.
ozkemal said:
hi, ...
Would you please suggest how can i flash my device with SD card ?
Or would you please tell the best way to learn how to upgrade my device with a ROM.
thanks in advance.
Click to expand...
Click to collapse
read:
http://forum.xda-developers.com/showpost.php?p=2643024&postcount=41
greetz
-and to answer ur next question in advance: read the whole thread on howto get it all in english
ezinput
does it have ezinput?
my diamond restarts randomly feew times a day.can anyone help
did you install any ROMs recently or is this a second hand device.
please go to start menu > settings > system > device information
type here all the details you see in device information
also reset your device with stylus and keep holding down the volume key.
give all the details you see in the Red Green Blue screen
to go back to your windows, simply reset again..
after pressing vol down +reset red green blue screen apears for very short period, after that screen turns blue. trigger host usb apears on blue screen
you shud actually reset with stylus and LET GO...but keep pressing volume down key...until RGB screen appears
i have instaled new rom recently but this problem apeeared before that
did you do mtty step before you installed any rom?
this is a know problem with diamond flashes withour erasing the entire flash block. you may experience freezes, hangups, reboots...
the mtty method helps to clear this flash block entirely, when a task 29 is done before each flash
http://forum.xda-developers.com/showthread.php?t=540290
DIAMIOO MFG 64 M
SPL-1.4 OliNex
MicroP-Diam (led)v 11
Psoc-Diam STAGE_PVT v0X30
Seria
this is what i see on rgb screen. sorry i'm on line with mobile so it takes time to restart and get back on line.
whats mtty should that help
Its okay. Take your time. So i see you have Hard SPL 1.40, which is good. Means you have flashed roms.
This is exactly what i meant. I dont think you have checked about what "mi-t-ty" is all about.
Like i said, mtty procedure is a procedure which needs to be done, to save yourself from problems like you are having now.
mtty is actually a program which shud be run from your PC. you put ur device in bootloader mode and perform a task 29.
when you do this, ur entire flash block on the diamond will be slate CLEAN.
you shud try it. i m sure it wil save ur device from restarts. this has been proven all over the forum.
btw whats the rom ur using now?
Thanks for adwice. I'm gona try it. I hope that thing works. If it does you have a drink when you come to croatia. BsBUltimate is my current rom
tljulj said:
Thanks for adwice. I'm gona try it. I hope that thing works. If it does you have a drink when you come to croatia. BsBUltimate is my current rom
Click to expand...
Click to collapse
If you are having a hard time running mtty or cant perform the task 29, let me know.
do you have some reccomendations about roms
i personally dont carry any roms that have sense 2.1 or sense 2.5 and neither TF3D 2.1
call me old fashioned. but i like to be able to run multiple apps without the message "out of memory" which you wud experience on these said roms.
but i do recommend GEN.Y Sense 2.1 ROM. Its pretty stable. And a recent one with TF3D 2.1 is paki's rom is one i like too.
ok thanks. aboat mtty... ihave red this link you gave me but its quite confusig and my inglish isnt so great. so... i dot kow should i flash a new rom when i do the mtty or i can do it with exsisting rom. if you can give me some directions it would be great
okay lemme make ur job easier.
1. the flash block is going to be cleaned. so your rom file be wiped out.
2. you can flash the same rom after doing mtty (task 29)
AS i said above. Lets make ur job easier. No need to install mtty or do task 29 from PC. Here is a shortcut method.
*Download the attached file. Extract it anywhere you want. I recommend C:\
you wil see two files inside Task29 folder
FlashRUU.exe
preflash.nbh
now extract the BsB rom file anywhere. copy the ruu_signed.nbh or diamimg.nbh from bsb extract and paste into Task29 folder
now there shud be 3 files in Task29 folder
FlashRUU.exe
preflash.nbh
ruu_signed.nbh < ------ bsb rom file or any other rom file
run FlashRUU.exe and follow on screen instructions.
***Note: Credits to etoy for the task 29 FlashRUU. i took this from his kitchen***
thanks... i have just performed task 29 i hope it wont restart again. but anyway thanks again
tljulj said:
thanks... i have just performed task 29 i hope it wont restart again. but anyway thanks again
Click to expand...
Click to collapse
okay...do let us know if it solved ur problem...
flashin my diamond as we speak...i wonder after how many flashes our diamonds get bricked....i must have done 70+ now... hehe
This is what happen's when i cook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think my problem has been solved but i cant be sure becouse it did restart once yesterday. no more since then.
tljulj said:
i think my problem has been solved but i cant be sure becouse it did restart once yesterday. no more since then.
Click to expand...
Click to collapse
what is the SPL version you have?
SPL 1.40 OliNex