my diamond restarts randomly feew times a day.can anyone help
did you install any ROMs recently or is this a second hand device.
please go to start menu > settings > system > device information
type here all the details you see in device information
also reset your device with stylus and keep holding down the volume key.
give all the details you see in the Red Green Blue screen
to go back to your windows, simply reset again..
after pressing vol down +reset red green blue screen apears for very short period, after that screen turns blue. trigger host usb apears on blue screen
you shud actually reset with stylus and LET GO...but keep pressing volume down key...until RGB screen appears
i have instaled new rom recently but this problem apeeared before that
did you do mtty step before you installed any rom?
this is a know problem with diamond flashes withour erasing the entire flash block. you may experience freezes, hangups, reboots...
the mtty method helps to clear this flash block entirely, when a task 29 is done before each flash
http://forum.xda-developers.com/showthread.php?t=540290
DIAMIOO MFG 64 M
SPL-1.4 OliNex
MicroP-Diam (led)v 11
Psoc-Diam STAGE_PVT v0X30
Seria
this is what i see on rgb screen. sorry i'm on line with mobile so it takes time to restart and get back on line.
whats mtty should that help
Its okay. Take your time. So i see you have Hard SPL 1.40, which is good. Means you have flashed roms.
This is exactly what i meant. I dont think you have checked about what "mi-t-ty" is all about.
Like i said, mtty procedure is a procedure which needs to be done, to save yourself from problems like you are having now.
mtty is actually a program which shud be run from your PC. you put ur device in bootloader mode and perform a task 29.
when you do this, ur entire flash block on the diamond will be slate CLEAN.
you shud try it. i m sure it wil save ur device from restarts. this has been proven all over the forum.
btw whats the rom ur using now?
Thanks for adwice. I'm gona try it. I hope that thing works. If it does you have a drink when you come to croatia. BsBUltimate is my current rom
tljulj said:
Thanks for adwice. I'm gona try it. I hope that thing works. If it does you have a drink when you come to croatia. BsBUltimate is my current rom
Click to expand...
Click to collapse
If you are having a hard time running mtty or cant perform the task 29, let me know.
do you have some reccomendations about roms
i personally dont carry any roms that have sense 2.1 or sense 2.5 and neither TF3D 2.1
call me old fashioned. but i like to be able to run multiple apps without the message "out of memory" which you wud experience on these said roms.
but i do recommend GEN.Y Sense 2.1 ROM. Its pretty stable. And a recent one with TF3D 2.1 is paki's rom is one i like too.
ok thanks. aboat mtty... ihave red this link you gave me but its quite confusig and my inglish isnt so great. so... i dot kow should i flash a new rom when i do the mtty or i can do it with exsisting rom. if you can give me some directions it would be great
okay lemme make ur job easier.
1. the flash block is going to be cleaned. so your rom file be wiped out.
2. you can flash the same rom after doing mtty (task 29)
AS i said above. Lets make ur job easier. No need to install mtty or do task 29 from PC. Here is a shortcut method.
*Download the attached file. Extract it anywhere you want. I recommend C:\
you wil see two files inside Task29 folder
FlashRUU.exe
preflash.nbh
now extract the BsB rom file anywhere. copy the ruu_signed.nbh or diamimg.nbh from bsb extract and paste into Task29 folder
now there shud be 3 files in Task29 folder
FlashRUU.exe
preflash.nbh
ruu_signed.nbh < ------ bsb rom file or any other rom file
run FlashRUU.exe and follow on screen instructions.
***Note: Credits to etoy for the task 29 FlashRUU. i took this from his kitchen***
thanks... i have just performed task 29 i hope it wont restart again. but anyway thanks again
tljulj said:
thanks... i have just performed task 29 i hope it wont restart again. but anyway thanks again
Click to expand...
Click to collapse
okay...do let us know if it solved ur problem...
flashin my diamond as we speak...i wonder after how many flashes our diamonds get bricked....i must have done 70+ now... hehe
This is what happen's when i cook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i think my problem has been solved but i cant be sure becouse it did restart once yesterday. no more since then.
tljulj said:
i think my problem has been solved but i cant be sure becouse it did restart once yesterday. no more since then.
Click to expand...
Click to collapse
what is the SPL version you have?
SPL 1.40 OliNex
Related
Hi guys,
I have a new htc trinity, and i have a xda tool to install wm6.
But.. htc give me the following screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Should i do something else before trying to upgrade?
It it locked? and if so, how can I just simply unlock
Best reg,
Alvaro
What ROM are you trying to flash?
MAN YOU JUST BRICK YOUR PHONE
Just joking
As the previous post, just run again the utility ROM upgrade and everything will go in the right way!!
mikhe69 said:
MAN YOU JUST BRICK YOUR PHONE
Just joking
As the previous post, just run again the utility ROM upgrade and everything will go in the right way!!
Click to expand...
Click to collapse
Doesn't it depend on the ROM he's trying to flash? I thought so too at first, but then I didn't see the Olipro behind the SPL...
Hi guys,
This is ther version that the tool identify.
Mike,
I havent break htc after a restart e it turn on like it was
Plastric,
what do u mean with olipro behind spl?
I have run the utility tool n times but nothing, always the same screen.. as it is.. and the htp looses the usb connection.. of course...
Does it have a solution?
Best reg,
Alvaro
Hi again,
I have read a litlle more, and i thought that u can answer a simple question:
Free HTC Trinity SIM & CID Unlocker Available
In http://forum.xda-developers.com/showthread.php?t=293957
My htc is probably locked by network, it as a network logo in the begining.
Its ok to try this?
Should i upgrade rom next? if so how?
Can u please help me with this?
I know that you have ansewred this times... enough, but help one more newbie please,
reg,
Alvaro
The ROM you have is for a Wizard. Do not try to flash that!
You need one of the Trinity ROMs - you're in the right place!
With a Trinity ROM - it will go into bootloader mode (the coloured bars on the screen) and then you will see a progress% bar.
Once it gets to 100% - you have successfully flashed
Also check out this before you flash a TRINITY ROM: http://forum.xda-developers.com/showthread.php?t=316098
Ill try to follow those instructions...
thats what im going to do
ill tell news latter,
best reg,
Alvaro
oh my word...
please please pleeeeese don't flash that.
read the upgrade guides here for step by step instructions
racerx_ said:
oh my word...
please please pleeeeese don't flash that.
read the upgrade guides here for step by step instructions
Click to expand...
Click to collapse
Hi guys!
Hi have finally tryed to upgrade trin... but...
I always get the 3 color screen...
http://trinityguides.info/index.php...ask=view&id=25&Itemid=55&limit=1&limitstart=2
I get stuck in this step.
I try to flash htc and it looses sinc with pc..
does someone have a idea?
reg,
Alvaro
alycad said:
Hi guys!
Hi have finally tryed to upgrade trin... but...
I always get the 3 color screen...
http://trinityguides.info/index.php...ask=view&id=25&Itemid=55&limit=1&limitstart=2
I get stuck in this step.
I try to flash htc and it looses sinc with pc..
does someone have a idea?
reg,
Alvaro
Click to expand...
Click to collapse
Anyone please...
reg,
Alvaro
simply restart the upgrade program
cs_e2 said:
simply restart the upgrade program
Click to expand...
Click to collapse
Hi..
Everytime I try it shows the 3 color mod, and ROMUpdateUtility looses sync... this happens after I say yes in htc to bootloader...
Is it dificult to unlock a network locked htc? if so I probably will stop trying..
reg,
Alvaro
alycad said:
Hi..
Everytime I try it shows the 3 color mod, and ROMUpdateUtility looses sync... this happens after I say yes in htc to bootloader...
Is it dificult to unlock a network locked htc? if so I probably will stop trying..
reg,
Alvaro
Click to expand...
Click to collapse
No problem...
When RomUpdateUtility looses sync just close and reopen it, but DON'T TOUCH THE PHONE!!! Is absolutely normal!
Believe me, I flash almost once a week, and everytime I have your "problem", note brackets cause is not a problem...
yeah just restart the update... if you follow the guide and manually place your device in bootloader, you won't have this problem.
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.
Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...
sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa
Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...
oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799
Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream
is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963
i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you
Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english
WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!
Hello there ,
i got a problem since 3 months ago and i still cannot do anything , i have been searching about any solution but i can't get through with anyone.
my mobile is : Xda Exec
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after the upgrading with different type of mobile Rom , the mobile was unable to turn on . i just see the black screen without anything .. i try to restart it but still black screen .. when i try to connect it via USB my Windows wouldn't recognize the mobile ..
is there any help please??
i try to download the original ROM from the o2 website but the link is die and o2 doesn't support xda exec anymore ..
http://xda.o2.co.uk/xdaExecSoftware.aspx
also
http://xda.o2.co.uk/devices/xda_exec.jsp
thanks in advance
CFIL
have you tried to boot into bootloader mode and reflash an o2 rom from there?
(can be found on the ftp )
what do you mean by bootloader mode , if you mean to press the two butoons to format the phone and install new one , then yes i tried it many times but nothings comes in the screen just black screen and sometime i have seen a version number like v1.0 ..
do you have the original ROM from the o2 via ftp ? post it please ..
thanks.
CFIL
You should take a kook at the wiki. There's a link at the top of the page.
Bootloader mode is accessed by pressing backlight, power and reset and there is no backlight, so take a close look...
EvilJogga i did that many times but nothings change just black screen with above USB written and bellow v2.10 .. just like this ..
is there any help ?!
thanks in advance..
CFIL
that is bootloader mode..
means you can reflash etc.
Thanks kingsizeriz for the help...
How can I reflash or install new ROM that can my mobile work again..
Also when I connect it to my pc the Activesyns doesn't see my mobile.
CFIL
did you CID unlock your device?
if so then i suggest installing ranjus v7.4 or similar if not get the original o2 rom from the ftp and extract it, in there it will have the application to run
it wont try to flash unless it can recognise the device so have a play around
i had to replace all the original flashing utilities with the "unsafe" MaUpgradeUt_noID.exe
as mine kept failing with the other :S
however i got your problem once, edited ranjus to include that utility and run it.
if that made sense?
Hi kingsizeriz ,My mobile is Unlooked ,I understood everything and I will try to do it ..
But I don't know from where can get the original o2 rom .. Do you have it please?
i try to search for it in the o2 website but all links are die .which are HTTP not ftp..
Thanks.
CFIL
all o2 links are dead
and they are not currently on xda-devs ftp (my mistake)
http://www.buzzdev.net/downloads.php?category=44
sign up there and download
you may need to download the launch rom then the update
im not to sure though.
Thank you kingsizeriz ,, its very useful . I will try to fix it and I wish my mobile come to live again..
Thanks man
CFIL
let me know how it goes
i installed the original ROM , when I finish the ROM processer said i have to disconnect from usb then open it ... I have been try it many times I got a message on my mobile with white screen and black written said "
press 0 to restore
factory default
press x to exit "
When I press 0 or x it comes screen with different color such as red, black and green. I have been waiting up to 30 mints put nothing change.
I tried it many times with different preening from 0 to x but still the same.
I thought I have to install the upgrade when i connect to the pc it didn't recognize the mobile.
I am sorry to bothering you guys.
best regards.
CFIL
what utility did you use to boot?
and leave the screen open whilst booting (it shows a percentage on the screen )
and press 0 when it prompts that
Hi kingsizeriz , i used the O2 Xda Exec Launch ROM v113139 ROM.
I did as you said, but i didn't see the percentage on my screen. I was waiting for the restore then I pressed 0 but nothing change. Then I wafting now for 1 day and the mobile in the charger but nothing change just screen with mixed colors
Best regards.
CFIL
if you CID unlocked your device try flashing ranjus v7.4 and see if that works?
Hello
sorry to ask this. but I need best Rom for my HTC TYTN1, because I always find myself with a problem I posted here :
http://forum.xda-developers.com/showthread.php?t=484219
Now I have the problem of two call buttons that do not work! just sometimes
I ask you if it is possible to redo my htc to zero! as he emerged from the factory for the 1st time!
I see no other solution.
help me please
Thank you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It sounds like you might be having some sort of hardware or button issues.
I don't know if it would help to do a hard reset or not. Make sure you back up your contacts and stuff first, or they will all be gone! You can hold both "softkey buttons" the buttons above the windows and ok buttons and hit reset, or go into system settings and run clear storage. But again, I'm not sure if that would help.
Or if your running a custom rom, you can try flashing your operators stock rom, or one of the at&t ones in my signature.
But if the buttons are going crazy, I'm still leaning towards something going on with some of the keys, or possibly even the hardware keyboard.
Has the phone been dropped? I have been reading some things about the ribbon cable coming undone or going bad that can cause odd issues.
Maybe someone else has experienced this, and can chime in?
Hi boog321
First, thank you for your answer
I just tried to restore but my buttons do not work
I downloaded now
Hermes Official AT & T shipped with WM6 Radio 1.54.07.00
I will Try, even if it is in English I think! what I need one in French! but essential to get my HTC well now
I already have a hard spl v7 and market,
it's good ?! or I should to do somthing after or I can do other hard !
Lately I bought a accesoire but I think that is the problem! by what I had the problem before you!
Cable Audio Multifonctions YC A300
and as I am new here and I have a little knowledge with the ROM and flash, I ask your help plz
thank you
You could try going to start>settings>system>clear storage
that is the equivalent to a hard reset.
or see if you can remove the software for the accessory.
hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!
m-graphique said:
hi !
I just install your 2 Rom's and still same problem ((((
what I must to do !!
Click to expand...
Click to collapse
It sounds like your buttons are dead
I've never had one of our phones apart yet, maybe somebody else here could point you in the right direction for instructions or direct you towards someone that could repair it.
I'm sorry that I can't help you beyond this.
I noticed
is that all the buttons in the front does not work, just the buttons of directions and ok works.
Now I want to know how to downgrade please, to get back to original rom / radio / spl and bootloader possible!
thx boog321
You can find a bunch of that stuff in the wiki. Hermes wiki
Available Original Shipped WM5 ROM Versions
Available Original Shipped WM6 ROM Versions
Available Extracted Radio Upgrade Only
Hopefully it has the one from your original provider listed.
thx again boog321
I tried a few ROM's but still same problem.
story by if can you please guide me to install windows 5!
thank you
Follow the link I gave above for WM5, then pick the one for your language and flash, just like the others.
that is what I do,
I run normally my ROM and after gives me Error 260 no answer the phone!
for info I have :
HERM200
IPL-1.04
HERM200
SPL-2.10.olipro
Maybe make sure both computer and phone are rebooted, then make sure activesync is connected to the phone. It needs to send commands to the phone.
If that doesn't work, I may be able to strip the rom down so it could be flashed via sd card. Just let me know, but to flash via sd card, it must be formatted fat32, and be 2 gig or less.
ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.
ultramag69 said:
ROM doesn't need to be "stripped down"... Just format sd card FAT32 and copy .nbh file of ROM onto card, Rename to hermimg.nbh. Re-insert sd card into hermes and go to bootloader. If everything is right, follow the promps.
As boog321 said, It must be a 2Gb or less sd card.
Cheers...
I still reckon its a hardware problem though.
Click to expand...
Click to collapse
I was thinking if it is like the at&t rom, it would need to be stripped then compiled back into a .nbh. Since it comes as an .exe
Sounds to me like it's a D-Pad problem, rather than a ROM problem.
Have u experienced any white-screen problems.
There is a thread dedicated to D-Pad problems, just search XDA.
I have repaired several TYTN 1s with either D-PAD or WSOD problems using the instructions gathered on this forum.
Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...
ultramag69 said:
Nope, just unrar the .exe file and you'll see the .nbh file. You should download a stripped ROM from here though, has radio removed...
Click to expand...
Click to collapse
Your, right, I had a huge brain fart! I was thinking of when I was playing with stripping the radio on my own. But, it had been so many beers ago!
Only difference is, that I use 7zip to extract it
Hi
Thank you for your answers
I dont know how, but I see that the buttons still works! just that sometimes and rarely now does not work!
I installed ROM version 3.62 / Radio 1.38.00.10
just the problem is that I found in English. and I'm good with windows and French and I already azerty keyboard ...
possible to change language of my TYTN without refueling ROM please?
hey Guys
i have a Problem
on my P3300 is wm6 Professional installed and i will wm 6.5
i have downloaded this file http://forum.xda-developers.com/showthread.php?t=513732
and i started the ROMUpdateUtility but they came a Error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and on the phone
pleace help me my english is very bad
hi 'Murat' (careful about giving away personal information when posting screenshots of your desktop)
search the forum for error 260
it's probably because you're using vista, although the screen that comes up and says to close other programs before flashing probably means INCLUDING Windows Media Player and whatever that MACOS-dock type taskbar addon is
Especially media player because it can try to make a connection with your phone as a 'removable storage' device
once you get that coloured screen up on your phone , it means your device is in bootloader mode
you can try to run the update again once the phone is already in that state and it might fix it.
if not, as i said, search the forum ... you might need to change your device drivers
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
this might also be a good time to point out theat there is also a v44 version of that rom on here, rather than the v43 you're trying to use
d-signet said:
search the forum for error 260
it's probably because you're using vista
once you get that coloured screen up, it means your device is in bootloader mode
you can try to run the update again once the phone is in that state and it might fix it.
if not, as i said, search the forum
it also looks like you havent USPL'd your phone yet so this ROM might not flash correctly.
Again, search the forum
Click to expand...
Click to collapse
sorry my english is very bad
can i flash this ROM on my Device??
i cant find error 260 in the forum. can you pleace help me for this problem i will wm6.5 on my device an touch flo
PLEACE HELP ME
yes i have vista 32-bit
Hi,
good idea for the phone screen but we can't read the numbers so you can just give them. i think SPL 3.13.0000 so you haven't Unlock your device.
1- Unlock your device http://forum.xda-developers.com/showthread.php?t=311403
2- if it's good, your numbers on bootloader (screen 3 colors) have changed normally in 1.11.xxx
3- you can now flash your device with your wm6.5 rom.
And yes use search for help you if always problem.
IPL 3.13.0001
SPL 3.13.0000
thx
i unlock my phone
hy
i will unlock my device but the dos window is 100% complete and he came the error 260
im a noob
Which program do you use for connect your device to vista?
Active Sync and vista not compatible
i have no programm
i have the connect the device on my pc per USB and my pc has find the phone for windows mobile device
ok try this soft for synchron device to PC
http://www.commentcamarche.net/faq/sujet-5337-activesync-et-windows-vista
i have no programm
what for a program i install for this phone??
look the link 2 post before.
Sorry i have big lag and it's very long for edit
ok thanks wait pleace
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
d-signet said:
i flash mine with vista no problem using the default WMDC connection
have you tried putting the phone into bootloader mode first and THEN flashing?
also search the forum for' error 260 vista drivers' ... you might need to rollback the USB driver to an earlier version but try everything else first.
USPL should be done first before rom flash
Click to expand...
Click to collapse
hy
i will in the bootloader mode
how i make
sry my english
sorry, I don't think i understand your question
to put your phone into bootloader mode, hold the RECORD/NOTES button and press the stylus into the reset hole at the same time.
Then you get the coloured stripes screen like your screenshot (that is bootloader mode)
First you need to USPL your phone. This makes SPL version 1.11.0000
Don't upgrade the rom until you can see :
SPL 1.11.0000
when you reset
search the forum for help or follow the link earlier
hy
i installed windows mobile device center and have connect my phone with my pc its OK
but
i will install the unlock "DOS Window 100%---------his open automatic ROMUpdateUtility and my P3300 have a white screen and is not more connected with the WMDC"
i pushed the Reset Button
pleace help
i search 1 week for this problem
pleace GUYS
hy thanks for you help
i cant find the RECORD/NOTES button
can you pleace help me
sry but my english ist very very bad
Try to run the "start_uspl" from Artemis_USPL but i think you must:
1 instal the program for synchron with vista,
2 connect your device but not in bootloader, you must see the today screen on your device.
3 only when synchron is finished you can run the "start_uspl" for unlock your device.
4 if there is no error and when the process is finished, normally he ask for restart device, and look if the numbers 3.13 is change in 1.11
Edit if there is an error (white screen, etc) try to run the "start_uspl" again and again. It will finish by working, i had to try many times before it really working.
but when the prozess finished "dos window 100%" my phone display is white an the connection to the PC is deactive
hy LeTo08
i have testing you TUTORIAL but this not completly
here the pictures
HELP