I bought a MDA2 off ebay and it said in the ad it had WM2005 on it, i figured it was a typo so i went ahead and bought it. ANyway i got the MDA and it has WM2005! The main reason i bought it was to run tomtom navigator 5, now i managed to install it but the backlight refuses to work. I just want to know where i can download the original rom from as i dont want WM2005 because its not designed for the phone....
Tried to be clever and i downloaded a rom from the o2 website and tried to reflash the phone with that rom, it came up with some error message and it totally crapped out my mda. My mda is now on a dark screen that says serial v1.02 and when i put it in the cradle it changes to USB v1.02. Tried running different roms but its not accepting any. Activesync is not picking the device up anymore...
can anyone help?
OK so you want an official rom?
1) What is the HTC anme for an MDA2?
2) What carrier are you currently on?
i dont mind what rom it is...as long as it works. Carrier? I am on the o2 network if that helps. HTC anme? I have no idea what that means. If you could tell me how i can get this info for you i will
oh crap, spelling mistake on my end, i meant HTC name
also i forgot, what country are you using the phone in?
Well its a T-Mobile MDA (what it says on the device itself but i beleive its the same as an XDA2). I am in England and i am on the o2 network.
looks exactly like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you mind having a non-official rom?
I dont mind at all, anything that makes it work.
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Midget_1990 said:
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Click to expand...
Click to collapse
Ok firstly, hard reset (holding power whilst placing stylus in reset hole) is the first thing i tried, its not having non of it. Just shows USB v1.02. I was able to download the rom from the o2 website by giving my IMEI of this tmobile phone (how? i dont know). There was an error durin the installation which caused my mda to crap out. Its not going past that screen at all.
during the install? as in while it was actually copying the rom?
yup m8, as it was getting transferred over
k, this hapened to me earlier todday as it happens (i was testing ivans new rom)
the reason it was caused is that the operator ID is set wrong, to fix this follow these instructions:
go to "c:\documents and settings\your_username\local settings\temp" and delete everything there.
run the origional o2 upgrade DONT PRESS NEXT OR ANYTHING, JUST START IT.
go back to "c:\documents and settings\your_username\local settings\temp"
there should be a new folder created, copy this to a tempory location.
extract the contents of this attached zip file into that copied directory.
double click on setoperator.bat
run the HimaUpgradeUt.exe in that folder to put your phone back to the wm2003 os.
if this doesn't work then i'm stumped, sorry
when i run the o2 upgrade it just shows a plf183.tmp file, no folders... ill try afew more things
ok this is what i am getting...
http://www.killerinstinct.pwp.blueyonder.co.uk/xdaerror.jpg
ok maybe the password was wrong for the file
does anyone know what version of himaupgradeut the latest o2 uk update uses? then i can get the right password
i dont mind using any ROM as long as its WM2003
try the same method as above, but with these files:
Related
Go here to get it
http://download.america.htc.com/RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe
Or Rapid share if you prefer
http://rapidshare.com/files/6639371..._6275_1.54.07.00_108_UOOS_SVN05_Ship.exe.html
Are you sure? ROM version on the web site is the WM5, and the file it downloads shows to be WM5.
The ROM date is 10/11/2007 and the Radio is 1.54. I've downloaded the ROM but I can't install because I don't have an 8525 anymore.
Here's the file I downloaded RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well they took it down or what because if you try know its the old rom from 4/9/07
The download popup showed the old rom was going to download, but this is what I downloaded.
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
well go ahead an share it bro posted or upload it somewhere!
GWelker62 said:
The download popup showed the old rom was going to download, but this is what I downloaded.
RUU_Hermes_CINGULAR_WWE_3_1_.57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship
Click to expand...
Click to collapse
Ooops, my bad.. The above rom is the one they leaked out. This is the one I just downloaded, and it is the old rom.
RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship
Great catch
Thanks for the link. It seems that AT&T is duing this under some duress. The blurb on the site makes it clear that this is WM6, and also encourages hoarding! Here is the text before it goes away:
"Welcome to the Windows Mobile 6 upgrade for the AT&T 8525. Please review the following prior to downloading and installing the ROM update on your device:
* This ROM is available from November 1, 2007 to February 1, 2008. After this date, the ROM will be removed from the website and will no longer be available for distribution.
* This ROM update is intended for the AT&T 8525 only and users should not load or attempt to load this version on any other device as it may cause serious issues/damage.
* At this time, Good Mobile Messaging is not supported on the AT&T 8525 with Windows Mobile 6. It is recommended that Good Mobile Messaging users not upgrade their device’s firmware at this time. Please note that once the latest firmware has been loaded, it can not be undone.
* HTC strongly suggests that users create a back up copy of this ROM and keep it in a secure place as all new and refurbished 8525 devices (including those received via Warranty Exchange) will come loaded with Windows Mobile 5 rather than Windows Mobile 6. "
Store it while it lasts.
kernelguy
i just download this from the link
RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe
its looks the new rom can i update my jasjam with it??????
Ok...uploading to rapishare...give it approx. 20 minutes then I'll post a link
This seems to be a good link to the NEW rom.
http://download.america.htc.com/RUU...502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe
plz i will ask again can i update it with my jasjam>
cause they say no
I just extracted the file, and this damn thing is about 90 megs, does that sound right?
I'm noticing on my desktop the software download page is taking me to the old rom for some reason. I use the same link on my laptop and I get the WM6 download page. Anyhow, the link I provided above should get ya the right rom regardless if you are having the problem I am.
I've got a link to rapishare on the 1st page now
why cant you tell me?
can i update it with my jasjam?????????
bubu23 said:
why cant you tell me?
can i update it with my jasjam?????????
Click to expand...
Click to collapse
I'm not familiar with the jasjam. Perhaps one of the other members can answer this for you. Sorry!
bubu23 said:
why cant you tell me?
can i update it with my jasjam?????????
Click to expand...
Click to collapse
Well, I don't answer questions I don't know the answer to. Sorry.
I downloaded for warranty's sake only (I am quite happy with vp3G's fine, fine work), but it's really there.
Sad thing is, at&t's craptastic handling of the WM6 release was so threaputic, such a nice outlet for my normally bottled rage... I really don't know what to do now.
I know this sounds kinda stupid.... I've been around here for a while and I should know this...
Will this shipped update change my SPL? I'm HardSPLv7...
Hello to everyone in xda-developers. Thank you guys for existing!
I have a problem uprading my HTC TyTN to official ROM version HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108.exe. Im a complete noob and have never flashed my pda before. My eyes burned from reading the forums for 4 days now. Basicaly what my problem is:
I've downloaded the RUU and I run it on my Pc (XP, Active Synk 4.5), connect the pda and when the device goes in to bootloader the active sync looses connection, so the RUU doesnt show my current rom version. The active synk is disconnected all the time. I press update, the progress bar shows on Pc and Pda, it goes to 1%, it stops giving me invalid vender id error and restarts PDA. I tried a different approach - i run the RUU, and on the page where is says "make sure that the active sync is connected" I connect the Pda. Active sync is connected then and I go to the update page and now it shows my rom version. I click update and the screen of the Pda goes dark, and in a while I get the connection error. I'm I doing something wrong?
I red almost everything several times, and I cant do it. I feel like a dumbass Can someone tell me if it's possible that my device is CidLocked, because the OS is in English, and when I go to the HTC e-club cite, it allows me only to download German version ROM? Do I have to try to CID unlock using AUTO_Unlock_v3a.bat and install HARDSPL7 before installing that ROM? Will I be able to install official ROM's if I do?
Thanks to all the addicts that will help. I promisse to learn fast!
HTC support
I also wrote to HTC online support - they haven't replied for several days now. Some support...
Hello, correct you do need to learn a bit more before proceding down this avenue im afraid From what ive read definatly DO NOT attempt to CID unlock the device....there is no need anyway.
First give us the following information:
What brand of Hermes do you have? Orange, Tmobile etc...
What language is the device in??
Where are you running the device??
What do you want to do??
You ARE a noobie....but thats not a bad thing....we all were at one stage so the best thing you can do is to give us that information and I will attempt to point you in the right direction.
Hello MrVanx
Hi MrVanx,
my admirations, I know I'm talking to a guru here, I red many of your guides. I can not say I understood much, but got a basic picture of things.
I will not attempt to CID Unlock the device as you suggested.
I think the PDA is genuine HTC TyTN. On the front side its only written HTC, behind the battery HERM200. I will upload an image, so you can see for yourself. The device is in English, but when I log in to HTC e-club, the only available rom for me is German. Maybe the PDA is imported in Bulgaria from Germany.
I'm using the Pda in Bulgaria (East Europe), the carrier is Globul.
What I want to do with the device is to upgrade it to a newer version of windows. I would like also to try some of the cooked roms but I don't feel quite so confident in my flashing skills - I actualy think I don't have any skills yet I really like the black today screen of LVSW WM6, can this be better for me than the official HTC WM6 ROM? Will I be able to upgrade to HTC WM6 official ROM and if I don't like it to go to LVSW?
Thanks for helping MrVanx. I couldn't think of a more appropriate person.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check your PMs
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
well, you are sure that you are setting it into pre-bl the way you are supposed to? (it will say USB in the bottom left corner, not usb is connected) and you have deleted the whole ipaq folder off of your hard drive and (C:/ipaq) and run that service pack again right?
Your english is fine, let's try to get your device online again.
Yes, i pressed Calendar button to activate USB Mode, not USB Connected..but, still it doesn't fix the problem..
Your english is fine, let's try to get your device online again happy to hear that, thanks contradude...
sorry for being afk right now but I'm out and about (im posting this from my treo). you should take a look at the chrismrulz bootloader. its supposed to help when nothing else can. I'm surprised that the pre-bl isn't helping you fix you problem.
edit: i'll take a look tonight and see what I can do about helping you get your device up. if anyone else has any ideas, feel free to post
edit 2: I took a look around for ideas and the only one that still seems viable is grabbing another ipaq (either borrowing one from a friend or paying $10-40 on ebay and getting one you can hold onto for parts). good luck with your pda and next time don't let your excitement get in the way of methodically reading and executing the instructions. I would offer to lend my 2495 but I'm in orlando, florida usa
Wow...that's so far, shipping cost maybe will be equal to used iPAQ here...hehehe.. Thank's for your offer contradude...i really appreciate that..
Well, now i would like to show some screenshot :
Flash using SP29865 from HP :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It doen't detect Model ID and ROM but, this HPRUU allow me to flash...
The Process stops at 0.1% but, the flasher lies to me it said "Congratulation..bla..bla..bla"
and this is what happened if i'm using another ROM files such as SP33303,4PDA.RU ROM,and the others...
Wrong Language, Not Connected to ActiveSync,etc.
hmm...trying to borrow another hx2000 series, but who? almost everyone in my country using PDAPhone, rarely uses PDAOnly..any plan to sell it Mr.Contra? or maybe you'll send it to me as a birthday present ? hehehe... just kidding...This is the first time i'm using Windows Mobile Based PDA's very love it..but i killed it...
Too Much love will kill you...
oxzoned said:
Somebody please help me, i was trying to upgrade my hx2110 from WM2003SE to WM6,yeah it was my fault..i didn't follow the instruction very well... i was stupid, upgrading using SP29xxxx(2003 Update ROM from HP) then swap the NBF Files...upgrade complete, and now He's dead.. Pre-BL still works, but i have no luck to reflash, HPRUU flashing stop at 0.1% and it says "Congratulation...blaa..blaa" but nothing happened to my hx2110..i used to read the step to unbrick hx2110, but i don't have another iPAQ hx2000 series to do the trick..is there any other way to un-brick my iPAQ ? please help...sorry for my bad english...
Click to expand...
Click to collapse
See if the info. in the following links are helpful
http://forum.xda-developers.com/showthread.php?t=372799
Thanks hkksl..One more question, is it possible to Flash dead iPAQ using mtty / putty ? or maybe from SD/CF Cards ?if it possible, how? is there any tutorial links ? thanks in advance..
Edit :
Last nite i dream my device running WM6..Unfortunately, i was just a dream
is it possible to use this (HTC Wizard) tutorial to flash using mtty ?
http://forum.xda-developers.com/showthread.php?t=276963
i always run all of my updates from 'white screen bootloader' aka pre-bl. hmm... that's a very interesting screenshot. is it charging the battery still when you plug it into the dock... also make sure that after it says pre-bl and you put it in the cradle that you hit the calendar button so that it goes from usb is connected to usb. also, do you have a power adapter hooked up to your dock or are you trying to do it just over USB?
as far as trying mtty, if you want to try it in a really easy form try chrismrulz' bootloader. here is the download link for it. it prepares your rom and then uses mtty to upload to your device. make sure to turn off activesync on your computer (right click on the greyed-out icon and go to options and deactivate almost all of them). then you take that, plus your original firmware rom and put it on a folder on your hard drive with no spaces in the path (i put mine in C:/bootloader). you then run bootloader.exe and just let it do it's thing. I don't click on any of the pop-ups, other than to show it where the rom is. I hope this works for you
Thank's for the reply contradude, first of all i would like flash mine with SP29795.exe (the old ROM 2003SE) if it doesn't work..then i'll try Chris Bootloader ( even tries many times but nothing happened,maybe i didn't follow the instruction well )
I'll report soon, wheter it works or not...right now, i'm not confident with my english
WOOOOHOOOOOO!!!! I've made it, now my hx2110 running WM6 4PDA Version!!! Here's the step :
1.) Download SP29795.EXE from :
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29795.exe
2.) Flash it using SP2975 RUU, it will flash your bricked iPAQ into WM2003SE 1.00.14
3.) Oops, flash completed..but some error has been occured..it won't enter WM2003SE
4.) Don't panic, reflash your iPAQ using SP29795 RUU, but swap the NBF From SP29865.exe
Code:
ftp://ftp.compaq.com/pub/softpaq/sp29501-30000/SP29865.exe
5.) Start flashing, after finished..voila! WM2003SE 1.10.09 should works..
6.) Now, flash your iPAQ to 1.00.00L then 1.00.00H after that go to WM6... ( see copenhagen tutorial from http://forum.xda-developers.com/showpost.php?p=1516882&postcount=66 )
7.Finished
I Would like to say thanks to Contradude, hkksl, copenhagen, Yurrix, and to everyone who made this possible.... THANKS!!!
Specially thanks QwertY and tester MadDog
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
All is like as in WM6 ROM for eten M600+, but extrom was cleaned
m600_WM6.1kE_R1 (40.8 Mb):
http://depositfiles.com/files/4121322
http://openfile.ru/33181
http://www.filefactory.com/file/1eb686/
http://ifolder.ru/5741603
That's cool. Got something to play around w/ my M600 (not plus)
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Im planning new releases,but only at weekdays,because i have troubles with inet operators,they told me that they would deside problem in time, that i said before
Good luck with that man....ISP's are hard to argue with.
thanks
you are truly amazing, thanks a bunch. i flashed it and its really good. although the calculator doesn't work for me, if you know why, let me know.
i know this problem, ill fix it in future release
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
Lagm, read the Wm6.1 for M600+ thread.
Kozhura,
Just flash your rom for M600, work great and I found USB host is working natively too. But I found my San Disk 6G Micro SDHC (w/ SD adapter) is not working. Are you planning to add SDHC support later?
Maybe the same issue w/ M600+ rom, I found GPRS is not working
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
kozhura said:
i know this problem, ill fix it in future release
Click to expand...
Click to collapse
ok, thanks, there are also some other little missing links and what not.
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
Thank you master athlon.
Cheers!
can i flash back to WM5 rom 230 after i flash this?
thanks,
dgun
Yes. I just did that because GPRS is not working.
Extract the temp.dat from WM5 rom (search my old post if you dunno how), rename it as xxx.bin and copy it to the SD. Then do the same thing as how to flash this rom
M700 Wm6.1 Rom
mr.r9 said:
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Click to expand...
Click to collapse
This ROM has 76MB of free storage space.
http://eten-users.eu/index.php?showtopic=13454
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
You can also copy USBDLUpdate_Console.exe(=*) to the SD card, and run that file from within Windows Mobile ( no need to force bootloader mode).
That way you don't need to reboot, Program (*) will set WM to sleep start the bootloader and upgrade the Glofiish
This way you don't need EUUs, or a scary USB connection to upgrade your precious.
* USBDLUpdate_Console.exe is included in every rom update.
** Put Phone always into battery charger (do NOT connect to PC/MAC).
*** Make shure your phone is in "flight mode" (gsm / wifi / bluetooth turned off).
i think i'm gonna wait for the next release, when the gprs working..
Khozura..you are the best.
dgun
Thanks jlavoie. I am downloading the rom now.
I wish the M700 had support like this
Thanks alot
haven't seen the update yet..where is it?
Kozhura...are you still going to update this to R2?
thanks,
Hi guys, i will be needing some assistance to understand what is happening with my jasjar.
I download a tomal´s rom (tml wm65_90_23004_64mb)), followed the steps and got stucked on bootloader. I then used Uni exit bootloader. It worked, but now my jasjar only works if I don´t put any sim-card. Cause if I put one, it gets stuck again
Any ideas? i noticed in the device info that extrom is not there.
Fenix7
Reflash without sim inserted and battery at 100%
Hope it helps,
Something is not right here. Like i tried to reflash it again, and same happens it works without the simcard but not with him
its very odd actually... like i managed to do it like once with simcard on but after that its the same... it got stuck again
And what happens if you try with another sim?
or testing your sim into another device
Fenix7 said:
It worked, but now my jasjar only works if I don´t put any sim-card. Cause if I put one, it gets stuck again
Click to expand...
Click to collapse
well try to upgrade your radio rom if gsm is not working (if sim is not recognized). flash with another rom if device gets stuck
Fenix7 said:
Any ideas? i noticed in the device info that extrom is not there.
Click to expand...
Click to collapse
well extrom is there but it is locked... you need to unlock to see it....
Cheers
Rajiv
rajivshahi said:
well try to upgrade your radio rom if gsm is not working (if sim is not recognized). flash with another rom if device gets stuck
well extrom is there but it is locked... you need to unlock to see it....
Cheers
Rajiv
Click to expand...
Click to collapse
Hi Rajiv, thanks for answering. Well my simcards work properly as i have tested them in other devices.
I flashed the Universal with an original wm5 rom now and it works well. So any ideas on what happened?
I flashed with Tomal wm65 rom and it only works without any simcard, otherwise it gets stucked in that first imate image. If i remove the simcard it works fine. (The rom is very cool by the way).
So what is the problem here? maybe my jasjar isn´t CID unlocled? or HSPL?
rajivshahi said:
well try to upgrade your radio rom if gsm is not working (if sim is not recognized).
Cheers
Rajiv
Click to expand...
Click to collapse
had this issue myself and that was the fix. my radio was the original factory one. not sure what yours is though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is what comes up when i try to upgrade a new rom
Until that point on the image you showed youre going ok, then clicking on update...what happens?
Well it starts the update normally, everything goes well. But its the same as before, it will only work properly without a simcard on
Hi,
You need to upgrade your Radio ROM.
The one you have probably is not not compatible with WM6 and thats why your device hangs after installing WM6 with a SIM inserted.
The SIM upgrade is not included in the firmware upgrades you will find here. Look at the wiki for separate SIM upgrade files.
Cheers,
vma
Problem solved :=) thanks everyone! I updated the radio rom to version 1.18 and it worked ehehe
Now another little problem
After installing tomal's 6.5 rom and updating the radio rom to 1.18, now i can´t instal programs like opera mini. Any ideas why? or the solution?
Thanks in advance
Mmm. that´s strange
I have the same ROM and radio and I can install any app I want
Have you tried a hard reset?
Opera Mini is a Java application. You need to install a Java Virtual Machine to be able to install and run Opera Mini.
Cheers,
vma