Hi guys, i will be needing some assistance to understand what is happening with my jasjar.
I download a tomal´s rom (tml wm65_90_23004_64mb)), followed the steps and got stucked on bootloader. I then used Uni exit bootloader. It worked, but now my jasjar only works if I don´t put any sim-card. Cause if I put one, it gets stuck again
Any ideas? i noticed in the device info that extrom is not there.
Fenix7
Reflash without sim inserted and battery at 100%
Hope it helps,
Something is not right here. Like i tried to reflash it again, and same happens it works without the simcard but not with him
its very odd actually... like i managed to do it like once with simcard on but after that its the same... it got stuck again
And what happens if you try with another sim?
or testing your sim into another device
Fenix7 said:
It worked, but now my jasjar only works if I don´t put any sim-card. Cause if I put one, it gets stuck again
Click to expand...
Click to collapse
well try to upgrade your radio rom if gsm is not working (if sim is not recognized). flash with another rom if device gets stuck
Fenix7 said:
Any ideas? i noticed in the device info that extrom is not there.
Click to expand...
Click to collapse
well extrom is there but it is locked... you need to unlock to see it....
Cheers
Rajiv
rajivshahi said:
well try to upgrade your radio rom if gsm is not working (if sim is not recognized). flash with another rom if device gets stuck
well extrom is there but it is locked... you need to unlock to see it....
Cheers
Rajiv
Click to expand...
Click to collapse
Hi Rajiv, thanks for answering. Well my simcards work properly as i have tested them in other devices.
I flashed the Universal with an original wm5 rom now and it works well. So any ideas on what happened?
I flashed with Tomal wm65 rom and it only works without any simcard, otherwise it gets stucked in that first imate image. If i remove the simcard it works fine. (The rom is very cool by the way).
So what is the problem here? maybe my jasjar isn´t CID unlocled? or HSPL?
rajivshahi said:
well try to upgrade your radio rom if gsm is not working (if sim is not recognized).
Cheers
Rajiv
Click to expand...
Click to collapse
had this issue myself and that was the fix. my radio was the original factory one. not sure what yours is though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So this is what comes up when i try to upgrade a new rom
Until that point on the image you showed youre going ok, then clicking on update...what happens?
Well it starts the update normally, everything goes well. But its the same as before, it will only work properly without a simcard on
Hi,
You need to upgrade your Radio ROM.
The one you have probably is not not compatible with WM6 and thats why your device hangs after installing WM6 with a SIM inserted.
The SIM upgrade is not included in the firmware upgrades you will find here. Look at the wiki for separate SIM upgrade files.
Cheers,
vma
Problem solved :=) thanks everyone! I updated the radio rom to version 1.18 and it worked ehehe
Now another little problem
After installing tomal's 6.5 rom and updating the radio rom to 1.18, now i can´t instal programs like opera mini. Any ideas why? or the solution?
Thanks in advance
Mmm. that´s strange
I have the same ROM and radio and I can install any app I want
Have you tried a hard reset?
Opera Mini is a Java application. You need to install a Java Virtual Machine to be able to install and run Opera Mini.
Cheers,
vma
Related
I bought a MDA2 off ebay and it said in the ad it had WM2005 on it, i figured it was a typo so i went ahead and bought it. ANyway i got the MDA and it has WM2005! The main reason i bought it was to run tomtom navigator 5, now i managed to install it but the backlight refuses to work. I just want to know where i can download the original rom from as i dont want WM2005 because its not designed for the phone....
Tried to be clever and i downloaded a rom from the o2 website and tried to reflash the phone with that rom, it came up with some error message and it totally crapped out my mda. My mda is now on a dark screen that says serial v1.02 and when i put it in the cradle it changes to USB v1.02. Tried running different roms but its not accepting any. Activesync is not picking the device up anymore...
can anyone help?
OK so you want an official rom?
1) What is the HTC anme for an MDA2?
2) What carrier are you currently on?
i dont mind what rom it is...as long as it works. Carrier? I am on the o2 network if that helps. HTC anme? I have no idea what that means. If you could tell me how i can get this info for you i will
oh crap, spelling mistake on my end, i meant HTC name
also i forgot, what country are you using the phone in?
Well its a T-Mobile MDA (what it says on the device itself but i beleive its the same as an XDA2). I am in England and i am on the o2 network.
looks exactly like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you mind having a non-official rom?
I dont mind at all, anything that makes it work.
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Midget_1990 said:
ok, try hard resetting your phone, it should boot back into WM5, you will then need to download a wm2003 rom (check the WIKI for options and choose one) and install that (again the wiki should hold all the information you need)
( i didnt tell you this in the first place because i was looking to find an official o2 uk rom, however you need to give them your imei, and o2 phone number to do that, somthing i dont have )
Click to expand...
Click to collapse
Ok firstly, hard reset (holding power whilst placing stylus in reset hole) is the first thing i tried, its not having non of it. Just shows USB v1.02. I was able to download the rom from the o2 website by giving my IMEI of this tmobile phone (how? i dont know). There was an error durin the installation which caused my mda to crap out. Its not going past that screen at all.
during the install? as in while it was actually copying the rom?
yup m8, as it was getting transferred over
k, this hapened to me earlier todday as it happens (i was testing ivans new rom)
the reason it was caused is that the operator ID is set wrong, to fix this follow these instructions:
go to "c:\documents and settings\your_username\local settings\temp" and delete everything there.
run the origional o2 upgrade DONT PRESS NEXT OR ANYTHING, JUST START IT.
go back to "c:\documents and settings\your_username\local settings\temp"
there should be a new folder created, copy this to a tempory location.
extract the contents of this attached zip file into that copied directory.
double click on setoperator.bat
run the HimaUpgradeUt.exe in that folder to put your phone back to the wm2003 os.
if this doesn't work then i'm stumped, sorry
when i run the o2 upgrade it just shows a plf183.tmp file, no folders... ill try afew more things
ok this is what i am getting...
http://www.killerinstinct.pwp.blueyonder.co.uk/xdaerror.jpg
ok maybe the password was wrong for the file
does anyone know what version of himaupgradeut the latest o2 uk update uses? then i can get the right password
i dont mind using any ROM as long as its WM2003
try the same method as above, but with these files:
Hi guys,
I have a new htc trinity, and i have a xda tool to install wm6.
But.. htc give me the following screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Should i do something else before trying to upgrade?
It it locked? and if so, how can I just simply unlock
Best reg,
Alvaro
What ROM are you trying to flash?
MAN YOU JUST BRICK YOUR PHONE
Just joking
As the previous post, just run again the utility ROM upgrade and everything will go in the right way!!
mikhe69 said:
MAN YOU JUST BRICK YOUR PHONE
Just joking
As the previous post, just run again the utility ROM upgrade and everything will go in the right way!!
Click to expand...
Click to collapse
Doesn't it depend on the ROM he's trying to flash? I thought so too at first, but then I didn't see the Olipro behind the SPL...
Hi guys,
This is ther version that the tool identify.
Mike,
I havent break htc after a restart e it turn on like it was
Plastric,
what do u mean with olipro behind spl?
I have run the utility tool n times but nothing, always the same screen.. as it is.. and the htp looses the usb connection.. of course...
Does it have a solution?
Best reg,
Alvaro
Hi again,
I have read a litlle more, and i thought that u can answer a simple question:
Free HTC Trinity SIM & CID Unlocker Available
In http://forum.xda-developers.com/showthread.php?t=293957
My htc is probably locked by network, it as a network logo in the begining.
Its ok to try this?
Should i upgrade rom next? if so how?
Can u please help me with this?
I know that you have ansewred this times... enough, but help one more newbie please,
reg,
Alvaro
The ROM you have is for a Wizard. Do not try to flash that!
You need one of the Trinity ROMs - you're in the right place!
With a Trinity ROM - it will go into bootloader mode (the coloured bars on the screen) and then you will see a progress% bar.
Once it gets to 100% - you have successfully flashed
Also check out this before you flash a TRINITY ROM: http://forum.xda-developers.com/showthread.php?t=316098
Ill try to follow those instructions...
thats what im going to do
ill tell news latter,
best reg,
Alvaro
oh my word...
please please pleeeeese don't flash that.
read the upgrade guides here for step by step instructions
racerx_ said:
oh my word...
please please pleeeeese don't flash that.
read the upgrade guides here for step by step instructions
Click to expand...
Click to collapse
Hi guys!
Hi have finally tryed to upgrade trin... but...
I always get the 3 color screen...
http://trinityguides.info/index.php...ask=view&id=25&Itemid=55&limit=1&limitstart=2
I get stuck in this step.
I try to flash htc and it looses sinc with pc..
does someone have a idea?
reg,
Alvaro
alycad said:
Hi guys!
Hi have finally tryed to upgrade trin... but...
I always get the 3 color screen...
http://trinityguides.info/index.php...ask=view&id=25&Itemid=55&limit=1&limitstart=2
I get stuck in this step.
I try to flash htc and it looses sinc with pc..
does someone have a idea?
reg,
Alvaro
Click to expand...
Click to collapse
Anyone please...
reg,
Alvaro
simply restart the upgrade program
cs_e2 said:
simply restart the upgrade program
Click to expand...
Click to collapse
Hi..
Everytime I try it shows the 3 color mod, and ROMUpdateUtility looses sync... this happens after I say yes in htc to bootloader...
Is it dificult to unlock a network locked htc? if so I probably will stop trying..
reg,
Alvaro
alycad said:
Hi..
Everytime I try it shows the 3 color mod, and ROMUpdateUtility looses sync... this happens after I say yes in htc to bootloader...
Is it dificult to unlock a network locked htc? if so I probably will stop trying..
reg,
Alvaro
Click to expand...
Click to collapse
No problem...
When RomUpdateUtility looses sync just close and reopen it, but DON'T TOUCH THE PHONE!!! Is absolutely normal!
Believe me, I flash almost once a week, and everytime I have your "problem", note brackets cause is not a problem...
yeah just restart the update... if you follow the guide and manually place your device in bootloader, you won't have this problem.
Specially thanks QwertY and tester MadDog
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
All is like as in WM6 ROM for eten M600+, but extrom was cleaned
m600_WM6.1kE_R1 (40.8 Mb):
http://depositfiles.com/files/4121322
http://openfile.ru/33181
http://www.filefactory.com/file/1eb686/
http://ifolder.ru/5741603
That's cool. Got something to play around w/ my M600 (not plus)
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Im planning new releases,but only at weekdays,because i have troubles with inet operators,they told me that they would deside problem in time, that i said before
Good luck with that man....ISP's are hard to argue with.
thanks
you are truly amazing, thanks a bunch. i flashed it and its really good. although the calculator doesn't work for me, if you know why, let me know.
i know this problem, ill fix it in future release
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
Lagm, read the Wm6.1 for M600+ thread.
Kozhura,
Just flash your rom for M600, work great and I found USB host is working natively too. But I found my San Disk 6G Micro SDHC (w/ SD adapter) is not working. Are you planning to add SDHC support later?
Maybe the same issue w/ M600+ rom, I found GPRS is not working
lagm said:
Anyone knows how to flash the .bin file on the M600?
Thnx in advance.
Click to expand...
Click to collapse
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
kozhura said:
i know this problem, ill fix it in future release
Click to expand...
Click to collapse
ok, thanks, there are also some other little missing links and what not.
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
Thank you master athlon.
Cheers!
can i flash back to WM5 rom 230 after i flash this?
thanks,
dgun
Yes. I just did that because GPRS is not working.
Extract the temp.dat from WM5 rom (search my old post if you dunno how), rename it as xxx.bin and copy it to the SD. Then do the same thing as how to flash this rom
M700 Wm6.1 Rom
mr.r9 said:
Nice work kozhura, now how about a wm6.1 rom for the eten m700
If you can do it then I will treat you for dinner
Thanks any way and keep on the good work
Click to expand...
Click to collapse
This ROM has 76MB of free storage space.
http://eten-users.eu/index.php?showtopic=13454
master athlon said:
to flash a bin file: put it on a SD card, that is formatted in FAT. go into bootloader mode (power+reset, let go of power, hold reset for 5 seconds). and if everything goes correctly it should display a black screen, and then it'll flash it.
Click to expand...
Click to collapse
You can also copy USBDLUpdate_Console.exe(=*) to the SD card, and run that file from within Windows Mobile ( no need to force bootloader mode).
That way you don't need to reboot, Program (*) will set WM to sleep start the bootloader and upgrade the Glofiish
This way you don't need EUUs, or a scary USB connection to upgrade your precious.
* USBDLUpdate_Console.exe is included in every rom update.
** Put Phone always into battery charger (do NOT connect to PC/MAC).
*** Make shure your phone is in "flight mode" (gsm / wifi / bluetooth turned off).
i think i'm gonna wait for the next release, when the gprs working..
Khozura..you are the best.
dgun
Thanks jlavoie. I am downloading the rom now.
I wish the M700 had support like this
Thanks alot
haven't seen the update yet..where is it?
Kozhura...are you still going to update this to R2?
thanks,
CE OS 5.2.20270 Build 20270.1.3.1
From Pham Quang PDAVIET.com
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM Integrated with:
- HTC Home
- AudioManager
- TaskManager
http://kc9.info/pdaviet/rom/PhamQuang/Hermes/HERMES_WWE_3.62.61.16_B20270.7z
USER/PASS login : PDAVIET/PDAVIET
Extract : PhamQuang
do this support 3G?
ov2rey said:
do this support 3G?
Click to expand...
Click to collapse
Of course it does!
I just downloaded it and flashed.
Will report back in a few hours.
Cheers.
From it's protocol version, i think it support. Better we heard form the creator or by clicking those link deeper
ov2rey said:
do this support 3G?
Click to expand...
Click to collapse
I believe it does. You'll just need to use the 3G Dialer from abusalza (PDACorner Coder)
pro838user said:
I believe it does. You'll just need to use the 3G Dialer from abusalza (PDACorner Coder)
Click to expand...
Click to collapse
Please note that 3G and Video Call are not the same thing...
Spporting 3G doesn't necessarily mean it supports Video Call...
Cheers.
I have been using this since yesterday and it is really fast and very stable so far. I have loaded all my programs and no hard or soft resets.
What is the "EXTROM Version" shown in the screenshots? Never noticed that on a "Device Information" screen before.
How much about Storage and Program Memory?
I ran PhamQuangs Rom for a couple of days when It was first released on pdaviet forum the 21st. Very fast and stable ROM. More responsive than most ROMs. When you don't get a signal after you first flash the ROM, it is because You have to set your GSM band to "auto" manually.
The only problem I ran into, it was totally my fault, was that I let my battery go below 40% and it became un- responsive.. You also have that Blue OEM coloring bleed thru.
flash again....
Have always liked the speed and responsiveness of PDAVIET roms, and I hope this one is even more then before..... will post when I have tested....
I had hopes to keep my current rom (MRH 8.1) for some time, and I said to myself only yesterday that it is no use to flash a new rom...
Well here I am, waiting for my Hermes to have charged above 50%.....
I think I am addicted, but I like it
RT, Norway
Normal storage, super storage?
zim2dive said:
Normal storage, super storage?
Click to expand...
Click to collapse
Normal storage
Is anyone else having a problem with themes displaying correctly?
this rom is very unstable with screen...
i never get hardreset...
ov2rey said:
this rom is very unstable with screen...
i never get hardreset...
Click to expand...
Click to collapse
I am confused. Is it "very unstable" or "never get hardreset"?
They are talking about the Blue OEM overlay. This rom is very stable. non UC..Normal Storage Rom
For some reason when I try to flash it closes my activesync connection and puts my phone in sleep mode shortly after the progress bar shows up in the pc app. I have never had this happen before with other ROMS. Any ideas?
All precautions such as battery and spl were taken. This is about the 6th time I have flashed my ROM but the first time this has happened. I restarted my pc and did a HardReset on my hermes.
*** UPDATE: I used the ROM Update Utility from a different ROM and it worked like a charm.
Mine did the same thing. I started out with my 8525 in bootloader mode and it worked fine.
I had the same business happen with my attempt to flash. I got around it by forcing bootloader mode (pwr, ok, reset)
Hi,
how are you?
hank you very much for your efforts
I have a problem when I try to update my mobile to other 6.5 rom
this is the error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
information:
I can install all original 6.5 roms
I try to back to 6.1 rom and then update to 6.5 rom but I see the same error
I try on another computer but the same
I try on win xp & win7 but no change
I try to remove activesync and install again but the same
search for this error and try all ideas for fix it but not sloved such as this programs:
Rhodium_CustomRUU_v1.1
Rhodium-HardSPL_V2_00R3_185HSPL
SSPL-Manual-RhodiumV1_10
Radio_Rhodium_4.49.25.91
task29
my mobile information:
touch pro 2 t7373 middle east
RHOD100
SPL-0.79.000
I want to install this rom:
Jackos EVO JackFULL 1.4.0 http://forum.xda-developers.com/showthread.php?t=989073
http://forum.xda-developers.com/showthread.php?t=632617
what's the problem
please help me
thanks
You need to read here and then proceed to here to be able to flash custom ROMs.
Regards,
WC
Wild Child said:
You need to read here and then proceed to here to be able to flash custom ROMs.
Regards,
WC
Click to expand...
Click to collapse
Thank you, but also show the error message
Based on this post you do not have device hard spl'd so therefore you will not be able to flash custom roms until this is achieved
WC
bahaa87 said:
Hi,
how are you?
hank you very much for your efforts
I have a problem when I try to update my mobile to other 6.5 rom
this is the error
information:
I can install all original 6.5 roms
I try to back to 6.1 rom and then update to 6.5 rom but I see the same error
I try on another computer but the same
I try on win xp & win7 but no change
I try to remove activesync and install again but the same
search for this error and try all ideas for fix it but not sloved such as this programs:
Rhodium_CustomRUU_v1.1
Rhodium-HardSPL_V2_00R3_185HSPL
SSPL-Manual-RhodiumV1_10
Radio_Rhodium_4.49.25.91
task29
my mobile information:
touch pro 2 t7373 middle east
RHOD100
SPL-0.79.000
I want to install this rom:
Jackos EVO JackFULL 1.4.0 http://forum.xda-developers.com/showthread.php?t=989073
http://forum.xda-developers.com/showthread.php?t=632617
what's the problem
please help me
thanks
Click to expand...
Click to collapse
Wild Child said:
Based on this post you do not have device hard spl'd so therefore you will not be able to flash custom roms until this is achieved
WC
Click to expand...
Click to collapse
For the record i had this message show a few times during my last rom upgrade. And i AM hardsplED.
Turned out to be just the miniusb cable
But he has said cable/connections are good....and based on what he has posted he is NOT hard spl'd
Regards,
WC
schumifer1 said:
For the record i had this message show a few times during my last rom upgrade. And i AM hardsplED.
Turned out to be just the miniusb cable
Click to expand...
Click to collapse
please help me
I can't update up to now.
Can you give me the tools for that.
My phone is touch pro 2
I try to use this tools in this link but no change
thanks
bahaa87 said:
please help me
I can't update up to now.
Can you give me the tools for that.
My phone is touch pro 2
I try to use this tools in this link but no change
thanks
Click to expand...
Click to collapse
First take your memory card out, Not your sim, then set your phone in bootmode (volume down + on-button+ reset), try then the tool and check if it worked.
let us know
N_Wolve said:
First take your memory card out, Not your sim, then set your phone in bootmode (volume down + on-button+ reset), try then the tool and check if it worked.
let us know
Click to expand...
Click to collapse
Thanks
But get this error message
[/url][/IMG]
i send massage to [email protected] and [email protected] but No reply
Did you try the retry?
Yes, but didn't Benefit me
thank you very much
it's worksuccessfully
*
what worked for you? can you post what steps you took to resolve the issue so others experiencing the same issue might know them?
There was a malfunction in the Port Lod so I did the work of g-tag
And after the decoding of the Rom here
http://attachments.xda-developers.com/attachment.php?attachmentid=232414&d=1254156455