Develop Bugs

Please Help SPV M5000

Dear All,
I've a problemi with my SPV M5000. After firmware upgrade, my device is stay in USB or Serial mode. I try hot and cold reset but no result? after few seconds it's back to USB or Serial Mode?
So, please help me!

I assume when you say you have hard reset the phone you have held in both soft keys and pressed the reset button? If so, I would flash the phone again, something probably went wrong.
Fin

Re ...
So the set is show only:
Serial on top on the screen and v1.00 on bottom of the screen.
When I connect USB cable is show:
USB on top on the screen and v1.00 on bottom of the screen.
After hot and cold reset this message is back?

Big Problem! - Spv M5000 upgrade - Need Help.

hello, first of all i am sorry if this is in the wrong section. you may move topic if you wish. please help.
i was just doing the spv m5000 new upgrade today when my computer just went off in the middle of the setup and now my SPV m5000 displays only to things without the backlight displays (serial and v1.00 when not connected to computer and USB and v1.00 when connected via usb. PLUS NO activeSYNC connection.
I have tryed hard reset but does not work screen comes saying press 0 to hard reset with the back light but nothing happens.
Please help i have just recently got this phone from ebay for over $350.00

htc diamond dead :(

I had those 2 HTC diamond to unlock... I tried solution posted in this forum: with first phone all went wright and I manage to unlock it after some trys on step 3... the second phone crash on step 2.. now it does'nt turn ON, and can't enter BOOT MODE (tricolor mode), and battery is ok!
Please help me recover this phone!

Same problem. Diamond totaly dead during flashing. Any chance to turn on for reflashing? Nothing like hard reset or removing batery working.

same thing here!

any solution to repair dead diamond !!?

any news to repair this phone

Sorry guys, On a lighter note, if anyone who has a dead US Diamond wants to sell their housing, especially the back cover please let me know.

do it..........
ok first there is not dead diamond put your battery in phone and connect with pc download rom update or flasher or some hard spl fixers and instal it on your device
because when is there tricolor at the bottom of the screen when device is not conected there is word SERIAL, and if you connect there is word USB so do not crash your self just be patient.........

how to solve pb diamond can't be enter in boot mode even reconised by pc
after unlock using cdma unlocker

any news on this?? My diamond it dead as well and need it for work. Please help some one must know what to do. I can't even connect to my pc

Contact this man by Skype- elco_nsdongle. He repairs dead Omnias. If you'll find diamond shematics I think he'll be able to help you.

Any solution about dead diamond? ?

Hi I was try to to flash some cooked ROM and my Diamond tells that is incorect Image. Then restart and start to bootloader. So i try to send another Rom but after restart its freeze on "HTC Diamond" screen. Ill try Hard reset many times with no result.
After thay I tryed to turn Diamond Off (Remove battery and put it back). In turned off Diamond I press and hold volume down + press and hold reset and turn the Diamond on. This it bring him to Bootloader.
Try it if it works for you.
Im sorry for my bad English.

whoever needs to fix dead diamond, you can PM me for help
but I can only help if the device can still boot to bootloader (tricolour screen).
by unlock...did you mean security unlocker?

htc diamond usb data tranfer is not working
how can recover 4 gb data in htc diamond internal memory
usb data transfer is not working b"coz by mistake cable is broken and data tranfer is working stop
any one help me,
bluetooth tranfer is working but it's very slowly

diamond rom crashed?

hello,
i've got serieus problems whit my diamond,
when i turn on the device the only thing i see ist the htc diamond page,
when i wan't to hard reset it it show's
no image found and then trigger usb host... after 5 min the reg green and bleu screen
when i plug it in the pc it doesn't do anything i dont see a external storage
can somebody help mee
sorry for my english i'm dutch

1. Hard reset is Vol Down + Enter + Stylus reset
then follow the screen
2. If you want more help please give the information from bootloader
Get bootloader is Vol Down + Stylus reset
Good luck

don't help ive done that
bootloader
diam100 mfg 64M
spl-1.49.olinex
micropodiam led v11
psoc-diam stage_ovt v0x30
serial

when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx

ketie007 said:
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
Click to expand...
Click to collapse
hi
Please do not double post, if you explain your problem in one thread you will get answer.
Read your other post "no usb connection"
Good luck

[Q] I-MATE JASJAR hung

Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me :crying::crying::crying::crying::crying::crying: